3Dlabs Wildcat II 5000 Graphics cards

Company

3Dlabs

Categories

Graphics cards

Model

3Dlabs Wildcat II 5000

Description

Drivers

Operating System

Windows 2000

Language Driver

Multilingual

Size Driver

2.7MB

File Name

wcgdrv_05050618.exe

Observations

Driver for Windows NT, Windows 2000 and Windows XP Professional

Installation Help
=================
To Install the Custom driver for 3D Studio Max, run the setup.exe
program on the product disk. The setup program will consist of dialog
boxes to help you install the driver.

Note:
If setup is not able to find 3DSMax in the system registry, it will not
install the driver and will exit. Consult your 3DS Max application
documentation to verify that the application is installed correctly.
The driver setup program will only install for an application that has
been correctly registered in your operating system.
If you still have problems after verifying the application was installed
correctly, see the Customer Support section below for contact information.

To use the driver, you must configure the properties settings in 3D Studio
Max. Consult your application documentation for configuring the application
to use a custom driver.

===============================================
Driver for Windows 2000 Workstation

Installation Help
=================
The Wildcat Pro Display driver will work with both AGP and AGP Pro versions
of the Wildcat Display adapter.

See MANIFEST.TXT for a list of delivered files.

Please refer to the installation documentation provided with the media
supplied with your system.

If you are installing an updated driver from the 3Dlabs web site,
please do the following:

1. Save the self-extracting .zip file to a temporary directory on the
system hard drive.

2. Double-click the self-extracting zip file to unzip the driver files.
These driver files are compressed and will be expanded during the
installation process.

NOTE:
When re-installing Windows 2000 with a Wildcat Pro card installed in the
system, the "Found New Hardware" dialog/wizard will not come up after
the final boot into Windows 2000. You must install the driver. Simply
run the setup.exe program located with the Wildcat driver software,
then reboot the system. The setup.exe program will install the driver
for you.

WINDOWS 2000 PLUG AND PLAY
--------------------------
For driver installation and removal, refer to the Hardware section
of the Windows 2000 online help. This Help is generally available by
clicking on "Start" at the bottom left of the screen, and selecting the
Help entry from the menu.

Company

3Dlabs

Available 2 files for 3DLabs Wildcat II 5000

Select Files