Available 3 files for BTC 1820U

Company

BTC

Categories

Sound Card & Multimedia & MP3

Model

BTC 1820U

Description

Drivers

Operating System

MS-DOS

Size Driver

343KB

File Name

1820ud31.zip

Observations

Step 1 : Install CD-ROM drive according to manufacturer's
procedures.
a. Connect power cable to CD-ROM drive.
b. Connect AT-Bus cable and audio cable between Sound
card and CD-ROM drive.

Step 2 : Install CD-ROM drivers which come with the drive.
a. Install drivers that come with your CD-ROM drive by
running the "install" or "setup" in the program disk. Make
sure the device drivers are added to your "CONFIG.SYS"
and "AUTOEXEC.BAT" files. Please refer User's Guide of
Installation & Drivers for more details.
Note:
The name for CD-ROM drive varies with respect to makers.
The path name may vary according to its installation
Make sure you have RESET your computer after two files
were altered.

Step 3 : Choose the correct CD-ROM type in the installation program
which comes with the sound card.
a. Run Sound Card Installation program.
b. Choose the correct CD-ROM drive maker.

Step 4 : Windows users will have to add CD AUDIO driver in to Windows
drivers list. (CD AUDIO driver is in the Windows SETUP diskettes.)
a. Run Windows and open "Control Panel".
b. Double click on "Drivers" and select "Add".
c. Choose "[MCI] CD Audio" and click on OK button.
d. Put in the correct disk when Windows instructs you to do so.
e. Screen will show "One CD-ROM drive was detected.
Installation is complete."

Company

BTC

Categories

Sound Card & Multimedia & MP3

Model

BTC 1820U

Description

Drivers

Operating System

Windows 3.1

Size Driver

343KB

File Name

1820ud31.zip

Observations

Step 1 : Install CD-ROM drive according to manufacturer's
procedures.
a. Connect power cable to CD-ROM drive.
b. Connect AT-Bus cable and audio cable between Sound
card and CD-ROM drive.

Step 2 : Install CD-ROM drivers which come with the drive.
a. Install drivers that come with your CD-ROM drive by
running the "install" or "setup" in the program disk. Make
sure the device drivers are added to your "CONFIG.SYS"
and "AUTOEXEC.BAT" files. Please refer User's Guide of
Installation & Drivers for more details.
Note:
The name for CD-ROM drive varies with respect to makers.
The path name may vary according to its installation
Make sure you have RESET your computer after two files
were altered.

Step 3 : Choose the correct CD-ROM type in the installation program
which comes with the sound card.
a. Run Sound Card Installation program.
b. Choose the correct CD-ROM drive maker.

Step 4 : Windows users will have to add CD AUDIO driver in to Windows
drivers list. (CD AUDIO driver is in the Windows SETUP diskettes.)
a. Run Windows and open "Control Panel".
b. Double click on "Drivers" and select "Add".
c. Choose "[MCI] CD Audio" and click on OK button.
d. Put in the correct disk when Windows instructs you to do so.
e. Screen will show "One CD-ROM drive was detected.
Installation is complete."

Company

BTC

Categories

Sound Card & Multimedia & MP3

Model

BTC 1820U

Description

Drivers

Operating System

Windows 95

Size Driver

720KB

File Name

1820w95.zip

Observations

Table of Content

1. Welcome
2. Install and configure Mozart Windows 95 driver
2.1 Remove existing Mozart driver.
2.2 How to install Mozart Windows 95 driver.
2.3 Install Joystick driver.
3. CD-ROM connected to the Mozart interface.
3.1 Procedure for installing CD-ROM driver.
3.2 Supported CD-ROM models.