Avision AV8000S Scanners > Downloads Drivers

Company

Avision

Categories

Scanners

Model

Avision AV8000S

Description

SCSI Domex DMX-3191E

Operating System

Windows 95-98

Size Driver

19KB

File Name

w9xr21.zip

Observations

The AdvanSys Windows 95 ASC3550 Driver supports AdvanSys
ABP940-UW Host Adapter Cards.

The WINDOWS.95 directory includes the files listed following this
paragraph. The latest versions of these files are contained on the
AdvanSys FTP and BBS sites. If the date listed in the WIN95.TXT file
is more than a few months old, please check the FTP or BBS site for
a newer version of the driver.

WIN95.TXT Installation Instructions
ASC3550.INF Windows 95 new installation file
ASC3550.MPD AdvanSys Windows 95 driver

Supported Adapters
==================

ABP-940UW - PCI Bus Master, Ultra-Wide SCSI Host Adapter
ABP-940UWD - PCI Bus Master, Ultra-Wide Differential SCSI Host Adapter

Creating the "Windows 95 AdvanSys Driver" Diskette
==================================================

NOTE: You can skip this step if you have the AdvanSys release
diskette. It is already set-up as a driver diskette to allow you
to install the AdvanSys driver using it.

To create a driver diskette for installing the AdvanSys Driver
to a new or existing Windows 95 system, copy all of the Windows 95
release files (ASC3550.INF, ASC3550.MPD) to the top directory of
a DOS formatted floppy diskette. Label the diskette "Windows 95
AdvanSys Ultra-Wide Driver" and also record the driver version number.

Company

Avision

Categories

Scanners

Model

Avision AV8000S

Description

SCSI Domex DMX-3191E

Operating System

Windows NT4

Size Driver

75KB

File Name

ntr21.zip

Observations

Creating the "Windows NT Installation" Diskettes
================================================

Windows NT requires three installation diskettes as well as the
AdvanSys driver diskette described below. If you do not have these
three Windows NT installation diskettes they can be created from
DOS using WINNT.EXE or from Windows NT using WINNT32.EXE. These
commands can be found on the Windows NT installation CD.

DOS: WINNT.EXE /OX
WINDOWS NT: WINNT32.EXE /OX
Creating the "Windows NT AdvanSys Driver" Diskette
==================================================

NOTE: You can skip this step if you have the AdvanSys release
diskette. It is already set-up as a driver diskette to allow you
to install the AdvanSys driver using it.

To create a driver diskette for installing the AdvanSys Driver
to a new or existing Windows NT system, copy all of the Windows NT
release files (DISK1, TXTSETUP.OEM, OEMSETUP.INF, ASC.SYS) to the
top directory of a DOS formatted floppy diskette. Label the diskette
"Windows NT AdvanSys Driver" and also record the driver version number.
New Windows NT Installation
===========================

At the end of the diskette phase of a new Windows NT installation,
you will be asked whether you want to: "Specify Additional Driver".
Answer yes by selecting 'S' and list of drivers will be presented.
From this list select "Other". When asked to enter a diskette, insert
the "Windows NT AdvanSys Driver" diskette.

After the AdvanSys driver is found on the diskette, select its name.
The driver will then be loaded and will search for an AdvanSys SCSI
adapter installed in the system.

If an AdvanSys SCSI adapter is found and the driver is successfully
loaded, Windows NT will display a message indicating that the driver
was loaded. After this message is displayed, press "Enter" to continue
the installation.
Existing Windows NT installation
================================

Windows NT 3.51:

1. From the "Program Manager - Main" folder select the "Windows NT
Setup" icon.

2. Select "Options" and from the Options list select "Add/Remove
SCSI Adapters".

3. From the "Select SCSI Adapter Option" use the down arrow to move
to the end of the list and select "Other".

4. When prompted, insert the "Windows NT AdvanSys Driver" diskette.
The system must be rebooted for the change to take effect.

Windows NT 4.0:

1. Open the "My Computer" icon and then its "Control Panel" icon.

2. From the "Control Panel" select the "SCSI Adapters" icon.

3. Select the "Drivers" tab and then from the "Install Driver"
window press the "Have Disk" button.

4. When prompted, insert the "Windows NT AdvanSys Driver" diskette.
The system must be rebooted for the change to take effect.

Access to Official Website Avision

Home English Home Spanish Home German Drivers English Drivers Spanish Drivers German

Welcome to the HelpDrivers, driver for printers.

Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more

You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.

Do not rename the file you're downloading, it may cause installation problems.

Available 6 files for Avision AV8000S

Select Files