Available 4 files for Epson MX-100 Impact
Select Files
Company
Epson
Categories
Printers
Serie
Epson MX Series
Model
Epson MX-100 Impact
Description
Drivers
Operating System
Windows 3.1
Version
v1.0bEs
Size Driver
0.51MB
File Name
ep10759.exe
Observations
A. Instructions for the EPSON Generic 9Pin With Euro Driver
B. How to install
C. General Notices
A. Instructions for the EPSON Generic 9Pin With Euro Driver
=============================================================
This printer driver supports printing with EPSON 9Pin single impact dot
matrix printers (SIDMs) using built-in fonts. In addition, the printer
driver also supports Euro Symbol printing.
The driver supports Euro Symbol printing with the FX-880 and later
models. To print Euro Symbols with the LX-300, FX-870, FX-1170, FX-2170,
and DFX-5000+ printers, please contact your local EPSON service center
for information on updating your printer's ROM.
If your printer is not among those listed above, then the built-in fonts
cannot print Euro Symbols.
B. How to install
==================
To install in Windows(R) 98 / Windows(R) 95 / Windows NT(R) 4.0
1. Double-click the "My Computer" icon.
2. Right click on the FD icon and select "open".
3. Double-click the "Setup.exe" icon.
To install in Windows(R) 3.1 / Windows NT(R) 3.50 / Windows NT(R) 3.51
1. From the File menu, select Run.
2. Type " A:\Setup.exe " and click OK.
(If the Floppy Disk drive you are using is not drive A, substitute the
correct letter.)
C. General Notices
===================
1. Setting the loading position
The driver automatically sets top and bottom margins as follows:
Manual Feed/ Cut Sheet Feeder : 4.2mm
Tractor (Continuous Paper) : 0mm
The driver does not support top and bottom margin adjustments. If you want
to change the printer margins, please do so with either the printer control
panel, or in your application. Please be sure not to print outside the
printable areas. Doing so may cause problems.
2. User-defined sizing
For Windows 3.1 users:
If using a user-defined size, set the page length in the printer's control panel
before printing.
For Windows NT(R) 3.50/Windows NT(R) 3.51 users:
If using a user-defined size, use the driver only with the Portrait orientation
as the Landscape setting affects the page length. To print in the Landscape
orientation, be sure to set the page length in the printer control panel before
you print.
3. Using the proportional size in built-in fonts
This printer driver supports printing with EPSON 9Pin single impact dot
matrix printers (SIDMs) using built-in fonts.
But the LX series printers cannot print the proportional size font.
Company
Epson
Categories
Printers
Serie
Epson MX Series
Model
Epson MX-100 Impact
Description
Generic 9-Pin Printer Driver
Operating System
Windows 3.1
Version
v1.0bEs
Size Driver
0.51MB
File Name
ep10759.exe
Date
05/29/03
Observations
This self-extracting file contains the Generic 9-Pin Printer Driver for Windows 3.1 (Printer Driver v1.0bEs, Core Driver Disk v1.0). This file is for use with all Epson 9-Pin Dot Matrix Printers.
Note: Please have your Windows 3.1 installation disks available as the printer driver requires the "unidrv.dll" file to complete the installation.
Company
Epson
Categories
Printers
Serie
Epson MX Series
Model
Epson MX-100 Impact
Description
Drivers
Operating System
Windows 95-98-NT3.51-NT4
Version
v1.0bEs
Size Driver
0.54MB
File Name
epson10753.exe
Observations
A. Instructions for the EPSON Generic 9Pin With Euro Driver
B. How to install
C. General Notices
A. Instructions for the EPSON Generic 9Pin With Euro Driver
=============================================================
This printer driver supports printing with EPSON 9Pin single impact dot
matrix printers (SIDMs) using built-in fonts. In addition, the printer
driver also supports Euro Symbol printing.
The driver supports Euro Symbol printing with the FX-880 and later
models. To print Euro Symbols with the LX-300, FX-870, FX-1170, FX-2170,
and DFX-5000+ printers, please contact your local EPSON service center
for information on updating your printer's ROM.
If your printer is not among those listed above, then the built-in fonts
cannot print Euro Symbols.
B. How to install
==================
To install in Windows(R) 98 / Windows(R) 95 / Windows NT(R) 4.0
1. Double-click the "My Computer" icon.
2. Right click on the FD icon and select "open".
3. Double-click the "Setup.exe" icon.
To install in Windows(R) 3.1 / Windows NT(R) 3.50 / Windows NT(R) 3.51
1. From the File menu, select Run.
2. Type " A:\Setup.exe " and click OK.
(If the Floppy Disk drive you are using is not drive A, substitute the
correct letter.)
C. General Notices
===================
1. Setting the loading position
The driver automatically sets top and bottom margins as follows:
Manual Feed/ Cut Sheet Feeder : 4.2mm
Tractor (Continuous Paper) : 0mm
The driver does not support top and bottom margin adjustments. If you want
to change the printer margins, please do so with either the printer control
panel, or in your application. Please be sure not to print outside the
printable areas. Doing so may cause problems.
2. User-defined sizing
For Windows 3.1 users:
If using a user-defined size, set the page length in the printer's control panel
before printing.
For Windows NT(R) 3.50/Windows NT(R) 3.51 users:
If using a user-defined size, use the driver only with the Portrait orientation
as the Landscape setting affects the page length. To print in the Landscape
orientation, be sure to set the page length in the printer control panel before
you print.
3. Using the proportional size in built-in fonts
This printer driver supports printing with EPSON 9Pin single impact dot
matrix printers (SIDMs) using built-in fonts.
But the LX series printers cannot print the proportional size font.
Company
Epson
Categories
Printers
Serie
Epson MX Series
Model
Epson MX-100 Impact
Description
Generic 9-Pin Printer Driver
Operating System
Windows 98-Windows 95- NT 4.0-Windows NT 3.51
Version
v1.0bEs
Size Driver
0.54MB
File Name
epson10753.exe
Date
05/29/03
Observations
This self-extracting file contains the Generic 9-Pin Printer Driver for Windows 95, 98, NT 3.51 and NT 4.0 (Printer Driver v1.0bEs, Core Driver Disk v1.0). This file is for use with all Epson 9-Pin Dot Matrix Printers.
Note: Please have your Microsoft Windows CD-ROM available as the printer driver may require some OS files from the CD-ROM to complete the installation.
Access to Official Website Epson
Welcome to the HelpDrivers, driver for printers.
Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more
You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.
Do not rename the file you're downloading, it may cause installation problems.