Available 1 files for Lava USB 2.0 Host

Company

Lava

Categories

Other Peripherals

Model

Lava USB 2.0 Host

Description

Adapter

Operating System

Windows 2000-XP

Size Driver

315KB

File Name

driver_floppy_usb2_version_1_0.zip

Observations

WINDOWS 2000 ReadMe

USB 2.0 IDE DRIVE CONTROLLER ("KAZAN")

In Windows 2000 the Lava USB 2.0 IDE Controller installed in
the Kazan drive enclosure [USB Lava Kazan Storage Adapter V3 (TPP)]
will work attached to a USB 1.1 or a USB 2.0 port.

Attached to a USB 1.1 port the transfer speed will be limited
to 12Mbits/second.

To achieve full potential of the Kazan interface,a USB 2.0 port
such as the Lava USB 2.0 Host Addapter should be used. This will
allow the Kazan interface to operate at 480Mbits/second
Installation:

When connected to a USB port ( 1.1 or 2.0), Windows should
detect the device and start the New Hardware wizard. All files
should be native to the Win2000 O/S and should be loaded
automatically.

NOTE ON OPERATION:

The USB busses are designed for "HOT" Plugging and unplugging.

When removing, unplugging the Lava Kazan drive enclosure, follow
Window's procedure for removing hardware:

- Open the "Unplug or Eject Hardware" wizard by clicking on
its icon, which can be found in the Windows System Tray
at the bottom right corner of the Windows screen.
- Select/Highlight the drive
- Click "CLose"
- Windows will inform you when it is safe to remove the drive.
NOTE:
If you not properly unplug your devices from the USB 2.0 PCI
Host Adapter, a message indicating the presence of an "Unknown
Device" may appear causing improper subsequent installation.

To restore the device follow these steps:

1. Power off the device.
2. Enter Device Manager|Universal Serial Bus controllers
and remove the "Unknown device".
3. Delete the files unknown.inf and unknown.pnf from the
\winnt\inf directory.
4. Power up the device and the system will find and
recognize/reinstall the device.