Available 6 files for Kouwell KW-910UW
Select Files
Company
Kouwell
Categories
Other Peripherals
Model
Kouwell KW-910UW
Description
Drivers
Operating System
3.1x-4.xx,OS-2 3.x-4.x
Size Driver
1.2MB
File Name
9xx.exe
Observations
Initio INI-9XXXU/UW Device Drivers for DOS
------------------------------------------
1. Overview
Under the Microsoft DOS operating System, the INI-9100U/9100UW host adapter
BIOS will provide the necessary functions to support SCSI hard disks. The BIOS
supports up to two hard disk drives for DOS 4.01 and below. It supports more
than two (up to eight) hard disk drives for DOS 5.0 and above.
You don't have to install a device driver to access the hard disk. However
you need to install ASPI(Advance SCSI Programming Interface) device driver to
support other SCSI devices such as CDROMs, Tape drives, or Scanners.
The Initio INICD.SYS driver is an ASPI compliant SCSI CD-ROM driver for DOS operating system.
The DOSSETUP utility will install the Initio ASPI device driver
(ASPI910U.SYS) for DOS 3.3.1 or later. It will also optionally install the
Initio SCSI CD-ROM device driver(INICD.SYS).
2. Installation Procedures
1. Insert the diskette into your floppy drive.
2. Change to the drive letter that contains the diskette.
(e.g., C:>A:)
3. Type DOSSETUP.
A:>DOSSETUP
3. ASPI Driver(ASPI910U.SYS) Command Line Options
The standard format for command line in the CONFIG.SYS file is:
DEVICE=C:\INIASPI\ASPI910U.SYS [Driver Config Option]
Driver Config Options:
/D Verbose mode provides detail information about driver when
driver is inititalized
/L Drvier scan eight LUNs for each SCSI Target.
/Bx,yy Scan device only on PCI BUS x, DEVICE yy
The range for "x" is from 0 to 7.
The range for "yy" is from 0 to 20.
/Bx Scan all the devices on the PCI BUS x
The range for "x" is from 0 to 7.
/Syy Scan device only on the PCI BUS 0 & Device yy.
The range for "yy" is from 0 to 20.
/CCBSx Defines the maximum number of concurrent I/Os that driver
supports. The range for "x" is from 1 to 16.
3. CD-ROM Driver(INICD.SYS) Command Line Options
The standard format for command line in the CONFIG.SYS file is:
DEVICE=C:\INIASPI\INICD.SYS [Driver Config Option]
Driver Config Options:
/D:
Company
Kouwell
Categories
Other Peripherals
Model
Kouwell KW-910UW
Description
Drivers
Operating System
FREE BSD 3.0
Size Driver
1.2MB
File Name
9xx.exe
Observations
Initio INI-9XXXU/UW Device Drivers for DOS
------------------------------------------
1. Overview
Under the Microsoft DOS operating System, the INI-9100U/9100UW host adapter
BIOS will provide the necessary functions to support SCSI hard disks. The BIOS
supports up to two hard disk drives for DOS 4.01 and below. It supports more
than two (up to eight) hard disk drives for DOS 5.0 and above.
You don't have to install a device driver to access the hard disk. However
you need to install ASPI(Advance SCSI Programming Interface) device driver to
support other SCSI devices such as CDROMs, Tape drives, or Scanners.
The Initio INICD.SYS driver is an ASPI compliant SCSI CD-ROM driver for DOS operating system.
The DOSSETUP utility will install the Initio ASPI device driver
(ASPI910U.SYS) for DOS 3.3.1 or later. It will also optionally install the
Initio SCSI CD-ROM device driver(INICD.SYS).
2. Installation Procedures
1. Insert the diskette into your floppy drive.
2. Change to the drive letter that contains the diskette.
(e.g., C:>A:)
3. Type DOSSETUP.
A:>DOSSETUP
3. ASPI Driver(ASPI910U.SYS) Command Line Options
The standard format for command line in the CONFIG.SYS file is:
DEVICE=C:\INIASPI\ASPI910U.SYS [Driver Config Option]
Driver Config Options:
/D Verbose mode provides detail information about driver when
driver is inititalized
/L Drvier scan eight LUNs for each SCSI Target.
/Bx,yy Scan device only on PCI BUS x, DEVICE yy
The range for "x" is from 0 to 7.
The range for "yy" is from 0 to 20.
/Bx Scan all the devices on the PCI BUS x
The range for "x" is from 0 to 7.
/Syy Scan device only on the PCI BUS 0 & Device yy.
The range for "yy" is from 0 to 20.
/CCBSx Defines the maximum number of concurrent I/Os that driver
supports. The range for "x" is from 1 to 16.
3. CD-ROM Driver(INICD.SYS) Command Line Options
The standard format for command line in the CONFIG.SYS file is:
DEVICE=C:\INIASPI\INICD.SYS [Driver Config Option]
Driver Config Options:
/D:
Company
Kouwell
Categories
Other Peripherals
Model
Kouwell KW-910UW
Description
Drivers
Operating System
LINUX
Size Driver
1.2MB
File Name
9xx.exe
Observations
Initio INI-9XXXU/UW Device Drivers for DOS
------------------------------------------
1. Overview
Under the Microsoft DOS operating System, the INI-9100U/9100UW host adapter
BIOS will provide the necessary functions to support SCSI hard disks. The BIOS
supports up to two hard disk drives for DOS 4.01 and below. It supports more
than two (up to eight) hard disk drives for DOS 5.0 and above.
You don't have to install a device driver to access the hard disk. However
you need to install ASPI(Advance SCSI Programming Interface) device driver to
support other SCSI devices such as CDROMs, Tape drives, or Scanners.
The Initio INICD.SYS driver is an ASPI compliant SCSI CD-ROM driver for DOS operating system.
The DOSSETUP utility will install the Initio ASPI device driver
(ASPI910U.SYS) for DOS 3.3.1 or later. It will also optionally install the
Initio SCSI CD-ROM device driver(INICD.SYS).
2. Installation Procedures
1. Insert the diskette into your floppy drive.
2. Change to the drive letter that contains the diskette.
(e.g., C:>A:)
3. Type DOSSETUP.
A:>DOSSETUP
3. ASPI Driver(ASPI910U.SYS) Command Line Options
The standard format for command line in the CONFIG.SYS file is:
DEVICE=C:\INIASPI\ASPI910U.SYS [Driver Config Option]
Driver Config Options:
/D Verbose mode provides detail information about driver when
driver is inititalized
/L Drvier scan eight LUNs for each SCSI Target.
/Bx,yy Scan device only on PCI BUS x, DEVICE yy
The range for "x" is from 0 to 7.
The range for "yy" is from 0 to 20.
/Bx Scan all the devices on the PCI BUS x
The range for "x" is from 0 to 7.
/Syy Scan device only on the PCI BUS 0 & Device yy.
The range for "yy" is from 0 to 20.
/CCBSx Defines the maximum number of concurrent I/Os that driver
supports. The range for "x" is from 1 to 16.
3. CD-ROM Driver(INICD.SYS) Command Line Options
The standard format for command line in the CONFIG.SYS file is:
DEVICE=C:\INIASPI\INICD.SYS [Driver Config Option]
Driver Config Options:
/D:
Company
Kouwell
Categories
Other Peripherals
Model
Kouwell KW-910UW
Description
Drivers
Operating System
REDHAT 5.2
Size Driver
1.2MB
File Name
9xx.exe
Observations
Initio INI-9XXXU/UW Device Drivers for DOS
------------------------------------------
1. Overview
Under the Microsoft DOS operating System, the INI-9100U/9100UW host adapter
BIOS will provide the necessary functions to support SCSI hard disks. The BIOS
supports up to two hard disk drives for DOS 4.01 and below. It supports more
than two (up to eight) hard disk drives for DOS 5.0 and above.
You don't have to install a device driver to access the hard disk. However
you need to install ASPI(Advance SCSI Programming Interface) device driver to
support other SCSI devices such as CDROMs, Tape drives, or Scanners.
The Initio INICD.SYS driver is an ASPI compliant SCSI CD-ROM driver for DOS operating system.
The DOSSETUP utility will install the Initio ASPI device driver
(ASPI910U.SYS) for DOS 3.3.1 or later. It will also optionally install the
Initio SCSI CD-ROM device driver(INICD.SYS).
2. Installation Procedures
1. Insert the diskette into your floppy drive.
2. Change to the drive letter that contains the diskette.
(e.g., C:>A:)
3. Type DOSSETUP.
A:>DOSSETUP
3. ASPI Driver(ASPI910U.SYS) Command Line Options
The standard format for command line in the CONFIG.SYS file is:
DEVICE=C:\INIASPI\ASPI910U.SYS [Driver Config Option]
Driver Config Options:
/D Verbose mode provides detail information about driver when
driver is inititalized
/L Drvier scan eight LUNs for each SCSI Target.
/Bx,yy Scan device only on PCI BUS x, DEVICE yy
The range for "x" is from 0 to 7.
The range for "yy" is from 0 to 20.
/Bx Scan all the devices on the PCI BUS x
The range for "x" is from 0 to 7.
/Syy Scan device only on the PCI BUS 0 & Device yy.
The range for "yy" is from 0 to 20.
/CCBSx Defines the maximum number of concurrent I/Os that driver
supports. The range for "x" is from 1 to 16.
3. CD-ROM Driver(INICD.SYS) Command Line Options
The standard format for command line in the CONFIG.SYS file is:
DEVICE=C:\INIASPI\INICD.SYS [Driver Config Option]
Driver Config Options:
/D:
Company
Kouwell
Categories
Other Peripherals
Model
Kouwell KW-910UW
Description
Drivers
Operating System
SCO UNIX
Size Driver
1.2MB
File Name
9xx.exe
Observations
Initio INI-9XXXU/UW Device Drivers for DOS
------------------------------------------
1. Overview
Under the Microsoft DOS operating System, the INI-9100U/9100UW host adapter
BIOS will provide the necessary functions to support SCSI hard disks. The BIOS
supports up to two hard disk drives for DOS 4.01 and below. It supports more
than two (up to eight) hard disk drives for DOS 5.0 and above.
You don't have to install a device driver to access the hard disk. However
you need to install ASPI(Advance SCSI Programming Interface) device driver to
support other SCSI devices such as CDROMs, Tape drives, or Scanners.
The Initio INICD.SYS driver is an ASPI compliant SCSI CD-ROM driver for DOS operating system.
The DOSSETUP utility will install the Initio ASPI device driver
(ASPI910U.SYS) for DOS 3.3.1 or later. It will also optionally install the
Initio SCSI CD-ROM device driver(INICD.SYS).
2. Installation Procedures
1. Insert the diskette into your floppy drive.
2. Change to the drive letter that contains the diskette.
(e.g., C:>A:)
3. Type DOSSETUP.
A:>DOSSETUP
3. ASPI Driver(ASPI910U.SYS) Command Line Options
The standard format for command line in the CONFIG.SYS file is:
DEVICE=C:\INIASPI\ASPI910U.SYS [Driver Config Option]
Driver Config Options:
/D Verbose mode provides detail information about driver when
driver is inititalized
/L Drvier scan eight LUNs for each SCSI Target.
/Bx,yy Scan device only on PCI BUS x, DEVICE yy
The range for "x" is from 0 to 7.
The range for "yy" is from 0 to 20.
/Bx Scan all the devices on the PCI BUS x
The range for "x" is from 0 to 7.
/Syy Scan device only on the PCI BUS 0 & Device yy.
The range for "yy" is from 0 to 20.
/CCBSx Defines the maximum number of concurrent I/Os that driver
supports. The range for "x" is from 1 to 16.
3. CD-ROM Driver(INICD.SYS) Command Line Options
The standard format for command line in the CONFIG.SYS file is:
DEVICE=C:\INIASPI\INICD.SYS [Driver Config Option]
Driver Config Options:
/D:
Company
Kouwell
Categories
Other Peripherals
Model
Kouwell KW-910UW
Description
Drivers
Operating System
Win31-9X-NT,Dos,NetWare
Size Driver
1.2MB
File Name
9xx.exe
Observations
Initio INI-9XXXU/UW Device Drivers for DOS
------------------------------------------
1. Overview
Under the Microsoft DOS operating System, the INI-9100U/9100UW host adapter
BIOS will provide the necessary functions to support SCSI hard disks. The BIOS
supports up to two hard disk drives for DOS 4.01 and below. It supports more
than two (up to eight) hard disk drives for DOS 5.0 and above.
You don't have to install a device driver to access the hard disk. However
you need to install ASPI(Advance SCSI Programming Interface) device driver to
support other SCSI devices such as CDROMs, Tape drives, or Scanners.
The Initio INICD.SYS driver is an ASPI compliant SCSI CD-ROM driver for DOS operating system.
The DOSSETUP utility will install the Initio ASPI device driver
(ASPI910U.SYS) for DOS 3.3.1 or later. It will also optionally install the
Initio SCSI CD-ROM device driver(INICD.SYS).
2. Installation Procedures
1. Insert the diskette into your floppy drive.
2. Change to the drive letter that contains the diskette.
(e.g., C:>A:)
3. Type DOSSETUP.
A:>DOSSETUP
3. ASPI Driver(ASPI910U.SYS) Command Line Options
The standard format for command line in the CONFIG.SYS file is:
DEVICE=C:\INIASPI\ASPI910U.SYS [Driver Config Option]
Driver Config Options:
/D Verbose mode provides detail information about driver when
driver is inititalized
/L Drvier scan eight LUNs for each SCSI Target.
/Bx,yy Scan device only on PCI BUS x, DEVICE yy
The range for "x" is from 0 to 7.
The range for "yy" is from 0 to 20.
/Bx Scan all the devices on the PCI BUS x
The range for "x" is from 0 to 7.
/Syy Scan device only on the PCI BUS 0 & Device yy.
The range for "yy" is from 0 to 20.
/CCBSx Defines the maximum number of concurrent I/Os that driver
supports. The range for "x" is from 1 to 16.
3. CD-ROM Driver(INICD.SYS) Command Line Options
The standard format for command line in the CONFIG.SYS file is:
DEVICE=C:\INIASPI\INICD.SYS [Driver Config Option]
Driver Config Options:
/D:
Access to Official Website Kouwell
Welcome to the HelpDrivers, driver for printers.
Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more
You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.
Do not rename the file you're downloading, it may cause installation problems.