Available 3 files for Digi AccelePort 8r-PCI

Company

Digi

Categories

Other Peripherals

Model

Digi AccelePort 8r-PCI

Description

Drivers

Operating System

Windows 2000-XP-2003

Version

4.0.21.0

Size Driver

527KB

File Name

40002207_a.exe

Observations

CONTENTS
Section Description
-------------------------------
1 Introduction
2 Supported Products
3 Additional Notes
4 History

1. INTRODUCTION
This document describes the device driver that supports
the Digi adapters listed below. The driver is for use
in the Microsoft Windows 2000 environment.

Refer to the following number when searching the Digi
International Inc. web site (www.digi.com) or the ftp
site (ftp.digi.com) for the latest software package:

40002207_

2. SUPPORTED PRODUCTS

CONTROLLERS

Model
-------------------------
Digi AccelePort C/X ISA/PCI
Digi AccelePort EPC/X PCI
Digi AccelePort Xem ISA/PCI

MULTI-PORT SERIAL CARDS

Model Number of Ports
--------------------------------------------------
Digi AccelePort Xr EIA-232 ISA/PCI 4
Digi AccelePort Xr EIA-232 ISA/PCI 8
Digi AccelePort Xr EIA-422 PCI 4
Digi AccelePort Xr EIA-422 PCI 8
Digi AccelePort Xr 920 PCI 2
Digi AccelePort Xr 920 ISA/PCI 4
Digi AccelePort Xr 920 ISA/PCI 8
Digi AccelePort Xe EIA-232 ISA 2
Digi AccelePort Xe EIA-232/422 ISA 4
Digi AccelePort Xe EIA-232/422 ISA 8
IBM 8-Port Async EIA-232/RS-422A PCI 8
IBM 128-Port Async PCI 128

3. ADDITIONAL NOTES

On-line help is available when you install the product.

DRIVER INSTALLATION NOTES FOR WINDOWS 2000
------------------------------------------
After installing one of the above adapters and booting the
machine, Windows 2000 will automatically install an older
version of the device driver, version 3.7.1.10. This version
of the driver is included as part of Windows 2000, and it
can also be found on the Windows 2000 CD.

The Update Driver functionality available via the Device
Manager is not supported, however. Instead, to upgrade the
existing device driver for any of the above adapters, please
follow these steps:

a. First, uninstall the previously installed device driver.
Run the Add/Remove Hardware Wizard from the Control Panel:
Start > Settings > Control Panel > Add/Remove Hardware

o Click "Next >"
o Select "Uninstall/Unplug a device"
o Click "Next >"
o Select "Uninstall a device"
o Click "Next >"
o Find and select the adapter from the list

Company

Digi

Categories

Other Peripherals

Model

Digi AccelePort 8r-PCI

Description

Drivers

Operating System

Windows 95-98-98Se-Me

Version

1.6.3

Size Driver

183KB

File Name

4001841c.exe

Observations

Contents
Part Description
1 Installation
3 Features
2 Requirements
3 Known Problems
4 Uninstalling the Software

Part 1: Installation
--------------------

Driver Update Installation:

If you already have a previous version of Digi's Windows 95/98 serial driver installed on your system,
you will need to remove that configuration before installing this new driver.

Restart your system and proceed with the New Installation instructions which follow.

New Installation for PCI adapters:
---------------------------------

Install the Digi PCI adapter, and boot Windows 95/98.

Windows 95/98 will detect the new adapter, and will display a 'New Hardware Found' message. This
message will be followed by 'Windows has found new hardware and is installing the software for it.'

At the 'Select which driver you want to install...' prompt, select the 'Driver from disk provided
by hardware manufacturer' option. Click 'OK'. Then specify the driver file location, and click 'OK'.

A 'Building driver database information file' message will display briefly.

If you are installing an AccelePort 4r PCI or an AccelePort 8r PCI, you will be prompted to select
which adapter is installed.

The Ports Configuration property page will be displayed for you to view the assigned port names.
For an Xem, you will need to configure the PORTS modules that are connected to your adapter.
On-line help is available for more intormation. When finished, click OK. Installation is complete!

If you need to edit the configuration of the attached ports:
From the Windows Control Panel, start the 'System' wizard. Select the 'Device Manager' tab. (If you
'view devices by type', the Digi device will be listed under 'Digi Intelligent Async adapters'.)
Highlight the Digi adapter entry, and select 'Properties.' Select the Port Configuration tab.

NOTE when removing PCI adapters:
If you need to remove the adapter from your system, you must use the System Device Manager to remove
the device driver before you physically remove the adapter from your system. (See Section 7:
Uninstalling the software).

If you don't remove the driver before removing the adapter from the system, Windows 95 does not
disable the port assignments for a configured PCI adapter that is not physically installed. But the
removed adapter will no longer be shown in the Device Manager device list. This means that there is
no easy way reclaim the port names that were assigned to the removed PCI adapter.

New Installation for ISA adapters:
---------------------------------
Digi has created it's own Windows 95/98 device class. On your first installation, the Digi device class
will be added to Windows 95/98. From there after, when using the 'Add New Hardware' wizard or 'System
Device Manager' wizard look for the device under the 'Digi Intelligent Async adapter' hardware type.

Here are the steps to install the Digi driver:

1) Add New Hardware to Windows 95/98:

From the Windows 95/98 Control Panel, start the 'Add New Hardware' wizard.

-- To begin installing new hardware, click 'Next'.
-- To the prompt Do you want Windows to search for your new hardware?, select No. Then push the Next
button.
-- Highlight 'Other Devices' hardware type, and click 'Next'. ( Note, an subsequent installs you will be
able to select 'Digi Intelligent Async adapters' as the hardware type.)
-- Click 'Have Disk..'
-- On the 'Install From Disk' applet, enter the drive or directory location of the Digi Windows 95 driver
files and click 'OK'.
-- A list of Digi's hardware choices will be displayed. Select your hardware adapter from the list and
click 'Next'.

Company

Digi

Categories

Other Peripherals

Model

Digi AccelePort 8r-PCI

Description

Drivers

Operating System

Windows NT

Version

2.6.4.0

Size Driver

596KB

File Name

4000082101z.exe

Observations

Section Description
-------------------------------
1 Introduction
2 Supported Products
3 Additional Notes
4 History

1. INTRODUCTION

This document describes the device driver that supports
the Digi adapters listed below. The driver is for use
in the Microsoft Windows NT 4.0 environment.

Refer to the following number when searching the Digi
International Inc. web site (www.digi.com) or the ftp
site (ftp.digi.com) for the latest software package:

40000821_

2. SUPPORTED PRODUCTS
CONTROLLERS

Model
-------------------------
Digi AccelePort C/X ISA/PCI
Digi AccelePort EPC/X ISA/PCI
Digi AccelePort Xem ISA/PCI

MULTI-PORT SERIAL CARDS

Model Number of Ports
--------------------------------------------------
Digi AccelePort Xr EIA-232 ISA/PCI 4
Digi AccelePort Xr EIA-232 ISA/PCI 8
Digi AccelePort Xr EIA-422 PCI 4
Digi AccelePort Xr EIA-422 PCI 8
Digi AccelePort Xr 920 PCI 2
Digi AccelePort Xr 920 ISA/PCI 4
Digi AccelePort Xr 920 ISA/PCI 8
Digi AccelePort Xe (8K) EIA-232 ISA 2
Digi AccelePort Xe (8K) EIA-232/422 ISA 4
Digi AccelePort Xe (8K) EIA-232/422 ISA 8
Digi PC/Xe ISA 4
Digi PC/Xe ISA 8
Digi PC/Xe ISA 16
Digi PC/Xi ISA 8
Digi PC/Xi ISA 16
IBM Async EIA-232 ISA 8

3. ADDITIONAL NOTES
On-line help is available when you install the product.

4. HISTORY

Version 2.6.4.0
---------------

October 17, 2001 -- Official release (Rev. Z)

o Updated firmware images to latest firmware release, Rev. L

Version 2.5.2
-------------

November 6, 2000 -- Official release (Rev. Y)

o Parity errors were not always reported
o Added support for IOCTL_SERIAL_GET_DTRRTS
o Updated the modem em inf to set an InactivityTimeout in
the modem properties