Comtrol VS1100 Other Peripherals > Downloads Drivers and Manual

Company

Comtrol

Categories

Other Peripherals

Model

Comtrol VS1100

Description

Device Driver

Operating System

Citrix WinFrame 1.6

Version

2.35

Size Driver

372KB

File Name

1800002b.exe

Observations

Do NOT install this driver in Windows 2000/XP operating systems Driver for the Windows(R) NT Operating System, for:
InterchangeVS(TM) 1000 Series Communication Hub
InterChangeVS 2000 Series Analog Modem Hub
RocketPort Serial Hub
=================================================================
SCOPE AND LIMITS

Use this file to install the Comtrol software. This readme
file covers:

- Prerequisites
- Removing existing drivers and components
- Driver installation
- Installation troubleshooting
- Known software capabilities and limitations
- Technical Support contact information

VS1000/1100 and RocketPort Serial Hub Users:
For hardware installation or modem, printer, NT RAS (Remote
Access Service), or backup server installation and configuration,
see the Installation and Configuration Guide for your product.

VS2000 Users:
For NT RAS, modem reset, modem configuration, or backup server
installation and configuration, see the VS2000 VS-Link
Installation and Configuration Guide. For hardware installation
information, see the Hardware Installation Card that came with
the unit.

This product was developed and tested under Microsoft Windows NT
Release 4.0. Alternate instructions for Windows NT 3.51 are given
where needed. If you are using Citrix WinFrame, follow the
instructions for NT 3.51 and adapt as needed.
=================================================================
PREREQUISITES

This file assumes that you have already installed the Windows NT
operating system and that you have a basic understanding of
Windows NT operation.
=================================================================
REMOVING EXISTING DRIVER

Comtrol recommends removing older versions of the driver
before installing new releases.

1. Open the Control Panel and start the Network applet.

2. Select the Adapters tab.

3. Highlight Comtrol VS1000/VS2000.

4. Click the Remove button.

5. Close the Network applet.

6. Restart the server so that your changes take effect.
=================================================================
INSTALLING THE DRIVER

After you have extracted the driver files, follow these steps:

1. Right-click on the Network Neighborhood and select properties,
or open the Control Panel and start the Network applet.

2. NT 4.0: Select the Adapters tab and click the Add button.
NT 3.51: Click the Add Adapter button.

3. NT 4.0: Click the Have Disk button.
NT 3.51: Highlight Other and click Continue.

4. Enter the drive and directory path to the installation files
and click OK

Company

Comtrol

Categories

Other Peripherals

Model

Comtrol VS1100

Description

Device Driver

Operating System

Citrix WinFrame 1.7

Version

2.35

Size Driver

372KB

File Name

1800002b.exe

Observations

Company

Comtrol

Categories

Other Peripherals

Model

Comtrol VS1100

Description

Device Driver

Operating System

Novell 4.11

Version

1.01

Size Driver

77KB

File Name

6612.zip

Observations

Change History for the aiovs1.nlm
InterChangeVS(TM) 1000/1100

Version Date Description
=============================================================================

1.01 10/01/97 Correct problem with help and GetPortsRollCall.
1.00 9/25/97 Initial Version

Notes:
======

The files included are as follows.

1) aiovs1.nlm - InterChangeVS 1000/1100 executable.

2) aiovs1.txt - README file for the InterChangeVS 1000/1100.

3) aiovs1.adi - Novell AIO configuration file that is used by the
Novell installation programs (i.e. inetcfg or nwccon).

4) aiovs1.pdi - Novell Protocol configuration file that is used by the
Novell installation programs (i.e. inetcfg or nwccon).

5) vs1man.nlm - Diagnostic tool for the InterChangeVS 1000/1100.

6) vs1man.txt - README file for the Diagnostic/Management tool.

7) vs1trace.nlm - Trace tool for the InterChangeVS 1000/1100.

8) vs1trace.txt - README file for the Trace tool.

The aiovs1 conforms to Version 1.1 of the NetWare AIO Driver

Company

Comtrol

Categories

Other Peripherals

Model

Comtrol VS1100

Description

Device Driver

Operating System

Novell 5.0

Version

1.01

Size Driver

77KB

File Name

6612.zip

Observations

Company

Comtrol

Categories

Other Peripherals

Model

Comtrol VS1100

Description

Device Driver

Operating System

Windows 2000

Version

2.40

Size Driver

362KB

File Name

1800036a.exe

Observations

Do NOT install this driver in a Windows XP or NT system. VSLink series Device Driver
for the Windows(TM) 2000 Operating System
Intel x86 Platform
==================================================================
SCOPE AND LIMITS

You can use this file or the Software Installation and
Configuration documentation to install the Comtrol VSLink software
for the following products:

- Interchange (TM) VS 1000
- RocketPort Serial Hub 4-port
- RocketPort Serial Hub 8-port

This software does NOT support the RocketPort Serial Hub Si.

This driver is for Windows 2000 Operating System only. Previous
versions of Windows cannot use this driver. See the Comtrol FTP
site for other Comtrol drivers.

This readme file covers:

- Prerequisites
- VS and RPSH installation
- Verifying the installation
- Upgrading the driver
- Removing VS and RPSH devices
- Known software capabilities and limitations
- Technical support contact information

For hardware installation or modem / printer installation and
configuration, see the Software Installation and Configuration
Guide. Additional information is also available after the
installation is complete by selecting help in the setup program.
You can view the help information before installation by running
WINHELP vssetup.hlp.

This driver was developed and tested under Microsoft Windows 2000.

=================================================================
PREREQUISITES

This file assumes that you have already installed the Windows
2000 operating system and that you have a basic understanding of
Windows 2000 operation.

To Install and manage a Comtrol Device, you must be logged into
the system with Administrator Access.
=================================================================
INSTALLING THE SOFTWARE

1. Right click on the My Computer Icon and select Properties from
the menu.

2. Select the Hardware tab, then click the Hardware Wizard button.

3. Click Next.

4. In the Hardware Wizard screens, select Add/Troubleshoot a
device. Windows will search for new Plug and Play
hardware to install.

5. Select "Add a new device" and click Next.

6. Select "No, I want to select the hardware from a list", then
select "Multi-port serial adapter" as the type of hardware
to install.

7. Press the "Have Disk" button, and point the installation to the
install disk or directory where you extracted the VSLink
assembly (eg. C:\COMTROL).

Company

Comtrol

Categories

Other Peripherals

Model

Comtrol VS1100

Description

Device Driver

Operating System

Windows 95

Version

1.10

Size Driver

308KB

File Name

1800034c.exe

Observations

Do NOT install this driver in Windows 2000/XP operating systems. RocketPort Serial Hub Windows 95/98 Driver Revision History
=====================================================================

V1.09 - 7-10-01
Updated WCOM32.exe and Portmon.exe as well as adding Portmon.cnt
and WCOM32.cnt for the help files. Wcom32.hlp was added to replace
WCOM.hlp and the Readme file as updated to show the correct Area
code for the US phone numbers.

v1.08 - 11-1-00
Update the Setup Help file, 8000126, from version 1.00 to
version 1.01. Added a .cnt table of contents file.
Updated Tech Support contact info.
v1.07 - 10-19-00
Fixes for incidents 78 and 497.

Incident 78 "VS2000 support indicated". The "Add New Hardware"
Wizard presented VS2000 as a configuration option. VS2000 is
not supported by this driver. The option was removed.

Incident 497, invalid device names presented in configuration
screen. Corrected.

v1.06 - 9-20-00
Add "wait for tx" support. Wait for transmit complete is a standard
feature that was missing from the original implementation of this driver.
v1.05 -
Fixed Null stripping

v1.04 -
01-19-99
Added optional setup at the time of program group creation.
Modified the device manager property page.
Changed the graphic in the setup program.
Removed VS2000 from the selectable devices.
Changed readme.txt to readme.doc
12-28-99
New peer, portmon, and wcom because of Win2000 changes.

v1.02 - 12-22-99
Bug fixes for initial release.

v1.01 - 5-11-99
Recompile in house.

v1.00 - 3-29-99
initial creation.

Company

Comtrol

Categories

Other Peripherals

Model

Comtrol VS1100

Description

Device Driver

Operating System

Windows 98

Version

1.10

Size Driver

308KB

File Name

1800034c.exe

Observations

Company

Comtrol

Categories

Other Peripherals

Model

Comtrol VS1100

Description

Device Driver

Operating System

Windows NT 3.51

Version

2.35

Size Driver

372KB

File Name

1800002b.exe

Observations

Do NOT install this driver in Windows 2000/XP operating systems. Driver for the Windows(R) NT Operating System, for:
InterchangeVS(TM) 1000 Series Communication Hub
InterChangeVS 2000 Series Analog Modem Hub
RocketPort Serial Hub
=================================================================
SCOPE AND LIMITS

Use this file to install the Comtrol software. This readme
file covers:

- Prerequisites
- Removing existing drivers and components
- Driver installation
- Installation troubleshooting
- Known software capabilities and limitations
- Technical Support contact information

VS1000/1100 and RocketPort Serial Hub Users:
For hardware installation or modem, printer, NT RAS (Remote
Access Service), or backup server installation and configuration,
see the Installation and Configuration Guide for your product.

VS2000 Users:
For NT RAS, modem reset, modem configuration, or backup server
installation and configuration, see the VS2000 VS-Link
Installation and Configuration Guide. For hardware installation
information, see the Hardware Installation Card that came with
the unit.

This product was developed and tested under Microsoft Windows NT
Release 4.0. Alternate instructions for Windows NT 3.51 are given
where needed. If you are using Citrix WinFrame, follow the
instructions for NT 3.51 and adapt as needed.
=================================================================
PREREQUISITES

This file assumes that you have already installed the Windows NT
operating system and that you have a basic understanding of
Windows NT operation.
=================================================================
REMOVING EXISTING DRIVER

Comtrol recommends removing older versions of the driver
before installing new releases.

1. Open the Control Panel and start the Network applet.

2. Select the Adapters tab.

3. Highlight Comtrol VS1000/VS2000.

4. Click the Remove button.

5. Close the Network applet.

6. Restart the server so that your changes take effect.
=================================================================
INSTALLING THE DRIVER

After you have extracted the driver files, follow these steps:

1. Right-click on the Network Neighborhood and select properties,
or open the Control Panel and start the Network applet.

2. NT 4.0: Select the Adapters tab and click the Add button.
NT 3.51: Click the Add Adapter button.

3. NT 4.0: Click the Have Disk button.
NT 3.51: Highlight Other and click Continue.

4. Enter the drive and directory path to the installation files
and click OK

Company

Comtrol

Categories

Other Peripherals

Model

Comtrol VS1100

Description

Device Driver

Operating System

Windows NT 3.51

Version

2.37

Size Driver

372KB

File Name

1800002c.exe

Observations

Company

Comtrol

Categories

Other Peripherals

Model

Comtrol VS1100

Description

Device Driver

Operating System

Windows NT4

Version

2.37

Size Driver

372KB

File Name

1800002c.exe

Observations

Access to Official Website Comtrol

Home English Drivers English

Welcome to the HelpDrivers, driver for printers.

Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more

You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.

Do not rename the file you're downloading, it may cause installation problems.

Available 18 files for Comtrol VS1100

Select Files