Casio XW-P1 Download Drivers and Firmware
Available 8 files for XW-P1
Company
Casio
Categories
Other Peripherals
Model
Casio XW-P1
Description
Firmware Update Software
Operating Systems
Macintosh
Version Firmware
1.10
Size Firmware
25.4Mb
File Name
xw-p1_updater_for_mac-1_10_120531.zip
Info
Operating System
•For Windows
Windows®XP Home Edition/XP Professional(32-bit),(SP2 or later)
Windows Vista®(32-bit)
Windows ®7(32-bit/64-bit)
•For Mac (Intel Mac Only)
Mac OS® X(10.5.X,10.6.X, 10.7.X)
Downloading the Update Software
Click the download file name for your instrument model and computer operating system.
To install the update software on your instrument
• Note that installation of the update software cannot be undone. Once you install the update software, there is no way to restore you instrument to its original firmware version.
• Installation of this update software will not delete the data you made. But just to be safe, you should copy the data on the SD card.
1. Extract the folder you downloaded.
Windows Users:
Check to make sure "XW-P1-Updater.exe" are present in the folder.
Macintosh Users:
Check to make sure "XW-P1 Updater.app" are present.
2. Remove the USB cable from the instrument, and turn off your instrument.
3. Press the "POWER" button pressing with both the "EDIT" and the "WRITE" button to enter the updating mode.
4. Both "UPDATE MODE" and all level indicator are displayed. (fig.1) Insert USB cable to the instrument and your computer.
Connect the instrument to its USB cable and establish a USB connection with your computer.You can find "CASIO XW-P1" is displayed on your computer.
fig.1
5. Double-click the update program you downloaded.
Update program will be started automatically. (Approximately 6 minutes after update program will be finished.)
Don't turn off the instrument or remove the USB cable from the instrument, when the firmware is under updating.
Windows Users:
The Application accesses the mounted drives. And when the application starts, Command Prompt will be appeared.
Macintosh Users:
During this update process, the following error message has no problem, "The disk was not ejected properly."
If you find this message, please select "OK" button, the update will proceed.
6. When the firmware is finished to update, update program will quit automatically.
And the instrument will restart automatically.
7. Confirm the version on your instrument.
Press the "SETTING" button on your instrument to enter setting mode.
When you select "INFO", Press the "ENTER" button and check "Version: 1.10" is displayed.
Delete the update program when you have finished to confirm.
•For Windows
Windows®XP Home Edition/XP Professional(32-bit),(SP2 or later)
Windows Vista®(32-bit)
Windows ®7(32-bit/64-bit)
•For Mac (Intel Mac Only)
Mac OS® X(10.5.X,10.6.X, 10.7.X)
Downloading the Update Software
Click the download file name for your instrument model and computer operating system.
To install the update software on your instrument
• Note that installation of the update software cannot be undone. Once you install the update software, there is no way to restore you instrument to its original firmware version.
• Installation of this update software will not delete the data you made. But just to be safe, you should copy the data on the SD card.
1. Extract the folder you downloaded.
Windows Users:
Check to make sure "XW-P1-Updater.exe" are present in the folder.
Macintosh Users:
Check to make sure "XW-P1 Updater.app" are present.
2. Remove the USB cable from the instrument, and turn off your instrument.
3. Press the "POWER" button pressing with both the "EDIT" and the "WRITE" button to enter the updating mode.
4. Both "UPDATE MODE" and all level indicator are displayed. (fig.1) Insert USB cable to the instrument and your computer.
Connect the instrument to its USB cable and establish a USB connection with your computer.You can find "CASIO XW-P1" is displayed on your computer.
fig.1
5. Double-click the update program you downloaded.
Update program will be started automatically. (Approximately 6 minutes after update program will be finished.)
Don't turn off the instrument or remove the USB cable from the instrument, when the firmware is under updating.
Windows Users:
The Application accesses the mounted drives. And when the application starts, Command Prompt will be appeared.
Macintosh Users:
During this update process, the following error message has no problem, "The disk was not ejected properly."
If you find this message, please select "OK" button, the update will proceed.
6. When the firmware is finished to update, update program will quit automatically.
And the instrument will restart automatically.
7. Confirm the version on your instrument.
Press the "SETTING" button on your instrument to enter setting mode.
When you select "INFO", Press the "ENTER" button and check "Version: 1.10" is displayed.
Delete the update program when you have finished to confirm.
Company
Casio
Categories
Other Peripherals
Model
Casio XW-P1
Description
Music Data Management Software
Operating Systems
Macintosh
Version Driver
Ver1.1.0
Size Driver
8.91Mb
File Name
dataeditorg1.dmg
Info
Data Editor for XW-G1 is a music data management software that you can run on your computer to perform the following tasks.
• Edit parameters of Instrument data on your computer.
• Edit Instrument data files created by the Instrument or this software.
• Save Instrument data to a computer.
• Copy PC data to the Instrument.
• Convert between WAVE file and user wave tone file formats.
• Convert MIDI Files into a data available for Phrase Sequencer and transfer to the Instrument.
Applicable Models
XW-G1
Operating System
•For Windows
Windows®XP Home Edition/XP Professional(32-bit),(SP2 or later)
Windows Vista®(32-bit)
Windows ®7(32-bit/64-bit)
•For Mac (Intel Mac Only)
Mac OS® X(10.5.X,10.6.X, 10.7.X)
Display Setting
Resolution:800 x 600 pixels or greater
Installation method:
1.Open the downloaded "DataEditorG1.dmg" file.
2.This will create an image named "CASIO Data Editor for XW-G1" on your Mac.
3.Copy the "CASIO Data Editor for XW-G1" to your application folder.
• Edit parameters of Instrument data on your computer.
• Edit Instrument data files created by the Instrument or this software.
• Save Instrument data to a computer.
• Copy PC data to the Instrument.
• Convert between WAVE file and user wave tone file formats.
• Convert MIDI Files into a data available for Phrase Sequencer and transfer to the Instrument.
Applicable Models
XW-G1
Operating System
•For Windows
Windows®XP Home Edition/XP Professional(32-bit),(SP2 or later)
Windows Vista®(32-bit)
Windows ®7(32-bit/64-bit)
•For Mac (Intel Mac Only)
Mac OS® X(10.5.X,10.6.X, 10.7.X)
Display Setting
Resolution:800 x 600 pixels or greater
Installation method:
1.Open the downloaded "DataEditorG1.dmg" file.
2.This will create an image named "CASIO Data Editor for XW-G1" on your Mac.
3.Copy the "CASIO Data Editor for XW-G1" to your application folder.
Company
Casio
Categories
Other Peripherals
Model
Casio XW-P1
Description
Source code release qt-everywhere-opensource-src-4.7.4-1
Operating Systems
Software
Size Driver
80Mb
File Name
qt-everywhere-opensource-src-4_7_4-1_tar.gz
Info
Data Editor for XW-G1 is a music data management software that you can run on your computer to perform the following tasks.
• Edit parameters of Instrument data on your computer.
• Edit Instrument data files created by the Instrument or this software.
• Save Instrument data to a computer.
• Copy PC data to the Instrument.
• Convert between WAVE file and user wave tone file formats.
• Convert MIDI Files into a data available for Phrase Sequencer and transfer to the Instrument.
Applicable Models
XW-G1
Operating System
•For Windows
Windows®XP Home Edition/XP Professional(32-bit),(SP2 or later)
Windows Vista®(32-bit)
Windows ®7(32-bit/64-bit)
•For Mac (Intel Mac Only)
Mac OS® X(10.5.X,10.6.X, 10.7.X)
Display Setting
Resolution:800 x 600 pixels or greater
Source code release
This software include software covered by a GNU Lesser General Public License (hereafter LGPL).
You can download LGPL application software of this software from this site.
[Document Disclaimer]
The LGPL application software has the following [Note] read by all means, and please download a file.
[Note]
* You are bound by the terms and conditions of the LGPL when using this source code.
* About LGPL application software:The source code is offered based on as "the present conditions" and LGPL.
Click the following links to find out about the LGPL.
LGPL(GNU Lesser General Public License) ver2.1
* You are not entitled to any support whatsoever concerning this source code. Note that CASIO will not respond to any questions concerning this software.
* Among this software, it is not the offer object of the source code about the software except the LGPL application software.
• Edit parameters of Instrument data on your computer.
• Edit Instrument data files created by the Instrument or this software.
• Save Instrument data to a computer.
• Copy PC data to the Instrument.
• Convert between WAVE file and user wave tone file formats.
• Convert MIDI Files into a data available for Phrase Sequencer and transfer to the Instrument.
Applicable Models
XW-G1
Operating System
•For Windows
Windows®XP Home Edition/XP Professional(32-bit),(SP2 or later)
Windows Vista®(32-bit)
Windows ®7(32-bit/64-bit)
•For Mac (Intel Mac Only)
Mac OS® X(10.5.X,10.6.X, 10.7.X)
Display Setting
Resolution:800 x 600 pixels or greater
Source code release
This software include software covered by a GNU Lesser General Public License (hereafter LGPL).
You can download LGPL application software of this software from this site.
[Document Disclaimer]
The LGPL application software has the following [Note] read by all means, and please download a file.
[Note]
* You are bound by the terms and conditions of the LGPL when using this source code.
* About LGPL application software:The source code is offered based on as "the present conditions" and LGPL.
Click the following links to find out about the LGPL.
LGPL(GNU Lesser General Public License) ver2.1
* You are not entitled to any support whatsoever concerning this source code. Note that CASIO will not respond to any questions concerning this software.
* Among this software, it is not the offer object of the source code about the software except the LGPL application software.
Company
Casio
Categories
Other Peripherals
Model
Casio XW-P1
Description
Source code release qt-everywhere-opensource-src-4.7.4-2
Operating Systems
Software
Size Driver
80Mb
File Name
qt-everywhere-opensource-src-4_7_4-2_tar.gz
Info
Data Editor for XW-G1 is a music data management software that you can run on your computer to perform the following tasks.
• Edit parameters of Instrument data on your computer.
• Edit Instrument data files created by the Instrument or this software.
• Save Instrument data to a computer.
• Copy PC data to the Instrument.
• Convert between WAVE file and user wave tone file formats.
• Convert MIDI Files into a data available for Phrase Sequencer and transfer to the Instrument.
Applicable Models
XW-G1
Operating System
•For Windows
Windows®XP Home Edition/XP Professional(32-bit),(SP2 or later)
Windows Vista®(32-bit)
Windows ®7(32-bit/64-bit)
•For Mac (Intel Mac Only)
Mac OS® X(10.5.X,10.6.X, 10.7.X)
Display Setting
Resolution:800 x 600 pixels or greater
Source code release
This software include software covered by a GNU Lesser General Public License (hereafter LGPL).
You can download LGPL application software of this software from this site.
[Document Disclaimer]
The LGPL application software has the following [Note] read by all means, and please download a file.
[Note]
* You are bound by the terms and conditions of the LGPL when using this source code.
* About LGPL application software:The source code is offered based on as "the present conditions" and LGPL.
Click the following links to find out about the LGPL.
LGPL(GNU Lesser General Public License) ver2.1
* You are not entitled to any support whatsoever concerning this source code. Note that CASIO will not respond to any questions concerning this software.
* Among this software, it is not the offer object of the source code about the software except the LGPL application software.
• Edit parameters of Instrument data on your computer.
• Edit Instrument data files created by the Instrument or this software.
• Save Instrument data to a computer.
• Copy PC data to the Instrument.
• Convert between WAVE file and user wave tone file formats.
• Convert MIDI Files into a data available for Phrase Sequencer and transfer to the Instrument.
Applicable Models
XW-G1
Operating System
•For Windows
Windows®XP Home Edition/XP Professional(32-bit),(SP2 or later)
Windows Vista®(32-bit)
Windows ®7(32-bit/64-bit)
•For Mac (Intel Mac Only)
Mac OS® X(10.5.X,10.6.X, 10.7.X)
Display Setting
Resolution:800 x 600 pixels or greater
Source code release
This software include software covered by a GNU Lesser General Public License (hereafter LGPL).
You can download LGPL application software of this software from this site.
[Document Disclaimer]
The LGPL application software has the following [Note] read by all means, and please download a file.
[Note]
* You are bound by the terms and conditions of the LGPL when using this source code.
* About LGPL application software:The source code is offered based on as "the present conditions" and LGPL.
Click the following links to find out about the LGPL.
LGPL(GNU Lesser General Public License) ver2.1
* You are not entitled to any support whatsoever concerning this source code. Note that CASIO will not respond to any questions concerning this software.
* Among this software, it is not the offer object of the source code about the software except the LGPL application software.
Company
Casio
Categories
Other Peripherals
Model
Casio XW-P1
Description
Source code release qt-everywhere-opensource-src-4.7.4-3
Operating Systems
Software
Size Driver
50Mb
File Name
qt-everywhere-opensource-src-4_7_4-3_tar.gz
Info
Data Editor for XW-G1 is a music data management software that you can run on your computer to perform the following tasks.
• Edit parameters of Instrument data on your computer.
• Edit Instrument data files created by the Instrument or this software.
• Save Instrument data to a computer.
• Copy PC data to the Instrument.
• Convert between WAVE file and user wave tone file formats.
• Convert MIDI Files into a data available for Phrase Sequencer and transfer to the Instrument.
Applicable Models
XW-G1
Operating System
•For Windows
Windows®XP Home Edition/XP Professional(32-bit),(SP2 or later)
Windows Vista®(32-bit)
Windows ®7(32-bit/64-bit)
•For Mac (Intel Mac Only)
Mac OS® X(10.5.X,10.6.X, 10.7.X)
Display Setting
Resolution:800 x 600 pixels or greater
Source code release
This software include software covered by a GNU Lesser General Public License (hereafter LGPL).
You can download LGPL application software of this software from this site.
[Document Disclaimer]
The LGPL application software has the following [Note] read by all means, and please download a file.
[Note]
* You are bound by the terms and conditions of the LGPL when using this source code.
* About LGPL application software:The source code is offered based on as "the present conditions" and LGPL.
Click the following links to find out about the LGPL.
LGPL(GNU Lesser General Public License) ver2.1
* You are not entitled to any support whatsoever concerning this source code. Note that CASIO will not respond to any questions concerning this software.
* Among this software, it is not the offer object of the source code about the software except the LGPL application software.
• Edit parameters of Instrument data on your computer.
• Edit Instrument data files created by the Instrument or this software.
• Save Instrument data to a computer.
• Copy PC data to the Instrument.
• Convert between WAVE file and user wave tone file formats.
• Convert MIDI Files into a data available for Phrase Sequencer and transfer to the Instrument.
Applicable Models
XW-G1
Operating System
•For Windows
Windows®XP Home Edition/XP Professional(32-bit),(SP2 or later)
Windows Vista®(32-bit)
Windows ®7(32-bit/64-bit)
•For Mac (Intel Mac Only)
Mac OS® X(10.5.X,10.6.X, 10.7.X)
Display Setting
Resolution:800 x 600 pixels or greater
Source code release
This software include software covered by a GNU Lesser General Public License (hereafter LGPL).
You can download LGPL application software of this software from this site.
[Document Disclaimer]
The LGPL application software has the following [Note] read by all means, and please download a file.
[Note]
* You are bound by the terms and conditions of the LGPL when using this source code.
* About LGPL application software:The source code is offered based on as "the present conditions" and LGPL.
Click the following links to find out about the LGPL.
LGPL(GNU Lesser General Public License) ver2.1
* You are not entitled to any support whatsoever concerning this source code. Note that CASIO will not respond to any questions concerning this software.
* Among this software, it is not the offer object of the source code about the software except the LGPL application software.
Company
Casio
Categories
Other Peripherals
Model
Casio XW-P1
Description
Music Data Management Software
Operating Systems
Windows
Version Driver
Ver1.1.0
Size Driver
6.69Mb
File Name
dataeditorg1.zip
Info
Data Editor for XW-G1 is a music data management software that you can run on your computer to perform the following tasks.
• Edit parameters of Instrument data on your computer.
• Edit Instrument data files created by the Instrument or this software.
• Save Instrument data to a computer.
• Copy PC data to the Instrument.
• Convert between WAVE file and user wave tone file formats.
• Convert MIDI Files into a data available for Phrase Sequencer and transfer to the Instrument.
Applicable Models
XW-G1
Operating System
•For Windows
Windows®XP Home Edition/XP Professional(32-bit),(SP2 or later)
Windows Vista®(32-bit)
Windows ®7(32-bit/64-bit)
•For Mac (Intel Mac Only)
Mac OS® X(10.5.X,10.6.X, 10.7.X)
Display Setting
Resolution:800 x 600 pixels or greater
Installation method:
1.Uncompress the downloaded "DataEditorG1.zip" file.
2.This will create a folder named "CASIO Data Editor for XW-G1" on your computer.
• Edit parameters of Instrument data on your computer.
• Edit Instrument data files created by the Instrument or this software.
• Save Instrument data to a computer.
• Copy PC data to the Instrument.
• Convert between WAVE file and user wave tone file formats.
• Convert MIDI Files into a data available for Phrase Sequencer and transfer to the Instrument.
Applicable Models
XW-G1
Operating System
•For Windows
Windows®XP Home Edition/XP Professional(32-bit),(SP2 or later)
Windows Vista®(32-bit)
Windows ®7(32-bit/64-bit)
•For Mac (Intel Mac Only)
Mac OS® X(10.5.X,10.6.X, 10.7.X)
Display Setting
Resolution:800 x 600 pixels or greater
Installation method:
1.Uncompress the downloaded "DataEditorG1.zip" file.
2.This will create a folder named "CASIO Data Editor for XW-G1" on your computer.
Company
Casio
Categories
Other Peripherals
Model
Casio XW-P1
Description
Firmware Update Software
Operating Systems
Windows
Version Firmware
1.10
Size Firmware
25.4Mb
File Name
xw-p1_updater_for_win-01_10_120405.zip
Info
Operating System
•For Windows
Windows®XP Home Edition/XP Professional(32-bit),(SP2 or later)
Windows Vista®(32-bit)
Windows ®7(32-bit/64-bit)
•For Mac (Intel Mac Only)
Mac OS® X(10.5.X,10.6.X, 10.7.X)
Downloading the Update Software
Click the download file name for your instrument model and computer operating system.
To install the update software on your instrument
• Note that installation of the update software cannot be undone. Once you install the update software, there is no way to restore you instrument to its original firmware version.
• Installation of this update software will not delete the data you made. But just to be safe, you should copy the data on the SD card.
1. Extract the folder you downloaded.
Windows Users:
Check to make sure "XW-P1-Updater.exe" are present in the folder.
Macintosh Users:
Check to make sure "XW-P1 Updater.app" are present.
2. Remove the USB cable from the instrument, and turn off your instrument.
3. Press the "POWER" button pressing with both the "EDIT" and the "WRITE" button to enter the updating mode.
4. Both "UPDATE MODE" and all level indicator are displayed. (fig.1) Insert USB cable to the instrument and your computer.
Connect the instrument to its USB cable and establish a USB connection with your computer.You can find "CASIO XW-P1" is displayed on your computer.
fig.1
5. Double-click the update program you downloaded.
Update program will be started automatically. (Approximately 6 minutes after update program will be finished.)
Don't turn off the instrument or remove the USB cable from the instrument, when the firmware is under updating.
Windows Users:
The Application accesses the mounted drives. And when the application starts, Command Prompt will be appeared.
Macintosh Users:
During this update process, the following error message has no problem, "The disk was not ejected properly."
If you find this message, please select "OK" button, the update will proceed.
6. When the firmware is finished to update, update program will quit automatically.
And the instrument will restart automatically.
7. Confirm the version on your instrument.
Press the "SETTING" button on your instrument to enter setting mode.
When you select "INFO", Press the "ENTER" button and check "Version: 1.10" is displayed.
Delete the update program when you have finished to confirm.
•For Windows
Windows®XP Home Edition/XP Professional(32-bit),(SP2 or later)
Windows Vista®(32-bit)
Windows ®7(32-bit/64-bit)
•For Mac (Intel Mac Only)
Mac OS® X(10.5.X,10.6.X, 10.7.X)
Downloading the Update Software
Click the download file name for your instrument model and computer operating system.
To install the update software on your instrument
• Note that installation of the update software cannot be undone. Once you install the update software, there is no way to restore you instrument to its original firmware version.
• Installation of this update software will not delete the data you made. But just to be safe, you should copy the data on the SD card.
1. Extract the folder you downloaded.
Windows Users:
Check to make sure "XW-P1-Updater.exe" are present in the folder.
Macintosh Users:
Check to make sure "XW-P1 Updater.app" are present.
2. Remove the USB cable from the instrument, and turn off your instrument.
3. Press the "POWER" button pressing with both the "EDIT" and the "WRITE" button to enter the updating mode.
4. Both "UPDATE MODE" and all level indicator are displayed. (fig.1) Insert USB cable to the instrument and your computer.
Connect the instrument to its USB cable and establish a USB connection with your computer.You can find "CASIO XW-P1" is displayed on your computer.
fig.1
5. Double-click the update program you downloaded.
Update program will be started automatically. (Approximately 6 minutes after update program will be finished.)
Don't turn off the instrument or remove the USB cable from the instrument, when the firmware is under updating.
Windows Users:
The Application accesses the mounted drives. And when the application starts, Command Prompt will be appeared.
Macintosh Users:
During this update process, the following error message has no problem, "The disk was not ejected properly."
If you find this message, please select "OK" button, the update will proceed.
6. When the firmware is finished to update, update program will quit automatically.
And the instrument will restart automatically.
7. Confirm the version on your instrument.
Press the "SETTING" button on your instrument to enter setting mode.
When you select "INFO", Press the "ENTER" button and check "Version: 1.10" is displayed.
Delete the update program when you have finished to confirm.
Company
Casio
Categories
Other Peripherals
Model
Casio XW-P1
Description
Music Data Management Software
Operating Systems
User's Guide
Language Driver
English
Version Driver
Ver1.0.0-Ver1.1.0
Size Driver
746Kb
File Name
dataeditors1-e1b.pdf
Info
Data Editor for XW-G1 is a music data management software that you can run on your computer to perform the following tasks.
• Edit parameters of Instrument data on your computer.
• Edit Instrument data files created by the Instrument or this software.
• Save Instrument data to a computer.
• Copy PC data to the Instrument.
• Convert between WAVE file and user wave tone file formats.
• Convert MIDI Files into a data available for Phrase Sequencer and transfer to the Instrument.
Applicable Models
XW-G1
Operating System
•For Windows
Windows®XP Home Edition/XP Professional(32-bit),(SP2 or later)
Windows Vista®(32-bit)
Windows ®7(32-bit/64-bit)
•For Mac (Intel Mac Only)
Mac OS® X(10.5.X,10.6.X, 10.7.X)
Display Setting
Resolution:800 x 600 pixels or greater
User's Guide Download (English):
This file is pdf format. (common to Windows and Mac)
Version 1.0.0 >> Version 1.1.0
• Adds the undoing and the redoing function. (For more information, see the User's Guide.)
• Adds User Wave Convert Mode. (For more information, see the User's Guide.)
• Adds the following parameters, in the parameter edit mode to edit PCM Melody tone.
Display Description Settings
Rise Specifies the time it takes from the start of application of the Vibrato until the effect reaches the level specified by Depth. 0 to 127
Mod Depth Modulation Depth. Specifies how modulation is applied to the Vibrato. 0 to 63
After Depth After Depth .Specifies Vibrato change when MIDI channel after touch is receieved. 0 to 63
• Improved certain operation.
• Edit parameters of Instrument data on your computer.
• Edit Instrument data files created by the Instrument or this software.
• Save Instrument data to a computer.
• Copy PC data to the Instrument.
• Convert between WAVE file and user wave tone file formats.
• Convert MIDI Files into a data available for Phrase Sequencer and transfer to the Instrument.
Applicable Models
XW-G1
Operating System
•For Windows
Windows®XP Home Edition/XP Professional(32-bit),(SP2 or later)
Windows Vista®(32-bit)
Windows ®7(32-bit/64-bit)
•For Mac (Intel Mac Only)
Mac OS® X(10.5.X,10.6.X, 10.7.X)
Display Setting
Resolution:800 x 600 pixels or greater
User's Guide Download (English):
This file is pdf format. (common to Windows and Mac)
Version 1.0.0 >> Version 1.1.0
• Adds the undoing and the redoing function. (For more information, see the User's Guide.)
• Adds User Wave Convert Mode. (For more information, see the User's Guide.)
• Adds the following parameters, in the parameter edit mode to edit PCM Melody tone.
Display Description Settings
Rise Specifies the time it takes from the start of application of the Vibrato until the effect reaches the level specified by Depth. 0 to 127
Mod Depth Modulation Depth. Specifies how modulation is applied to the Vibrato. 0 to 63
After Depth After Depth .Specifies Vibrato change when MIDI channel after touch is receieved. 0 to 63
• Improved certain operation.