Clevo M548SR Notebooks & Tablet PCs > Downloads Drivers and Manual

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo Mxxx Series

Model

Clevo M548SR

Description

Audio Drivers

Operating System

Windows Vista

Version

60011240

Size Driver

13.7MB

File Name

audio_v.zip

Observations

Driver Installation/Removal Procedure For Realtek High Definition Audio Codec:
=================================================================================

<<< For Windows 2000/XP/Vista x86/x64 (WDM driver) >>>

---------------------------------------
Setup Driver at first time:
---------------------------------------

Step 1. Before installing the Realtek HD Audio Drivers, Press the
[Cancel] button if Windows detect the Multimedia Audio device.

Step 2. Insert the "Realtek HD Audio Drivers" CD into the CD-ROM
drive and run the setup.exe program to finish the installation.

Step 3. Click on [Next/OK/Go] to continue the procedure. If the Windows popup
"Digital Signature Not Found" message, press [Yes] to continue the
installation.

Step 4. Finally, select to restart the system and press [Finish] to complete
the installation.

The system will reload the drivers and do some adjustments in the INF
file if so required.

--------------------------
Update Driver:
--------------------------

Step 1. Follow Step 2,3,4 described in [Setup at first time] above to complete
the procedure.

--------------------------
Remove Driver:
--------------------------

Step 1. Go to Start\Settings\Control Panel.

Step 2. Select [Add/Remove Programs] icon.

Step 3. Select "Realtek HD Audio Drivers" and press [Change/Remove]
button.

Step 4. Click on [Next/OK/Go] to finish the uninstallation.

Step 5. At the end of the procedure, select to restart the system and press
[Finish] to complete the uninstallation.

<< Other Informations >>

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo Mxxx Series

Model

Clevo M548SR

Description

Card reader Drivers

Operating System

Windows Vista

Version

3.00.07

Size Driver

747KB

File Name

creader_v.zip

Observations

ENE MR510 / CB-712/714 Full Package Release Note
*************************************************
Version : 3.00.07
Date : 2007-07-09

OS :
Vista64, Vista, WinXP64, WinXP, Win2000, WinME, Win9X

Product :
MR510 / CB-712/714 Setup Shield
All OS : 2.00.02
CB714 Cardbus INF Update
Vista/64 : 3.00.01
WinXP/2k : 3.00.01
WinXP64 : 2.00.08
WinME/9x : 2.00.01
MR510 / CB-712/714 SecureDigital Card Reader Driver
Vista64 : 2.00.04
Vista : 2.00.02
WinXP/2k : 2.00.02
WinXP64 : 1.07.00
WinME/9x : 1.01.00
MR510 / CB-712/714 Memory Stick Card Reader Driver
Vista64 : 2.00.03
Vista : 2.00.02
WinXP/2k : 2.00.02
WinXP64 : 1.07.00
WinME/9x : 1.01.00
MR510 / CB-712/714 SmartMedia/XD Card Reader Driver
Vista/64 : 2.00.02
WinXP/2k : 2.00.02
WinXP64 : 1.07.00
WinME/9x : 1.01.00

WHQL Vista32/64 submission ID :
Cardbus INF : 1233857
SecureDigital : 1256082
Memory Stick : 1256073
SmartMedia/XD : 1241407

WHQL WinXP submission ID :
Cardbus INF : 1241409
SecureDigital : 1241409
Memory Stick : 1241409
SmartMedia/XD : 1241409

WHQL WinXP64 submission ID :
Cardbus INF : 1048034
SecureDigital : 1048034
Memory Stick : 1048034
SmartMedia/XD : 1048034

Product : ENE MR510 / CB-712/714 Setup Shield
*******************************************
OS:
Vista64, Vista, WinXP64, WinXP, Win2000, WinME, Win9X
===== Release note =====
Version : 2.00.04 (SD), 2.00.03 (MS)
Date : 2007-07-09
1. For Vista64 ,new DMA way to support when system memory upper 4G.
===== Release note =====
Version : 2.00.02
Date : 2007-03-01
1. Fix bug --- Fix Program Compatibility Assistant (PCA) warning dialog issue when User Account Control (UAC) is enable.

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo Mxxx Series

Model

Clevo M548SR

Description

FingerPrint Drivers

Operating System

Windows Vista 32/64 bits

Version

1.9.2.0093

Size Driver

40.8MB

File Name

fingerprint_v.zip

Observations

These changes were made in the current version:
________________
Build 5.6.2.3447
FIX: More compatible form auto-submitting in IE
FIX: Fixed navigation icon behaviour
CHG: Added new WHQL signed driver (Build 93)
CHG: Updated TFM library (build 48)
ADD: Possibility to hide TBX based on TBX settings in NVM
________________
Build 5.6.2.3437
CHG: Vertical speed of sensor scrolling adjusted.
CHG: Reduced timeout for sonly powersaving mode to 1 minute in Vista
ADD: New tfm library (build 47)
ADD: Winterskin added
________________
Build 5.6.2.3407
ADD: Support for new sensor only chip (TCS4C)
CHG: Navigation algorithm improvement
CHG: Minor text changes in enrollment
CHG: Enrollment window enlargement, more instructions added
CHG: Biometric performance improvement
CHG: Enrollment policy update
FIX: Password bank stability updates on Vista

*******************************
________________
Build 5.6.0.3326
FIX: Minor typo and GUI fixes
FIX: Password Bank: Upgrade of previous versions' dialog registrations
FIX: Password Bank, Vista: Correct default browser used for replay from Biomenu when more browsers is installed
FIX: File Safe: Biometric window hidden behind File Safe dialog when ATOK IME is active
FIX: Unable to add 21st finger to some versions of Power-on Security

________________
Build 5.6.0.3278
FIX: PasswordBank: Frozen apps do not hang PasswordBank
FIX: Deadlock in selfenrollment when keyboard was switched
FIX: Password Bank: Replay registration from biomenu fixed for case where File Safe is not installed
FIX: Vista: Do not display wrong swipe feedbacks on strange positions (like in the bottop left corner of the screen).
CHG: Vista: Disable Ctrl+Alt+Del option is shown on Vista in domain (checked by default). It allows the user to control the CAD message appearance. In workgroup it is not displayed and CAD is always disabled.
FIX: TPM: improved TPM error messages
FIX: File Safe: Workaround for problem with resizing of archive on Vista (when adding more big files at once - vista bug)
FIX: Few localization issues were fixed.
FIX: Correctly read user's locale for domain users. (thus set the correct language in some cases when user local is different than OS language) .
FIX: Icon image unification in start menu (in start menu one of the application icons is different in some special cases)
FIX: Fixed Windows XP preload problems with blocked OOBE
CHG: In case of sensor only on Vista the power save sensor timeout is set to 5 minutes
FIX: Fingerprint image is now displayed in infopanel even after low quality swipe
FIX: All settings from 5.4 are migrated to 5.6 during upgrade

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo Mxxx Series

Model

Clevo M548SR

Description

TouchPad Drivers

Operating System

Windows Vista 32/64 bits

Version

10.0.12.0

Size Driver

11.4MB

File Name

touchpad_v.zip

Observations

Synaptics Pointing Device Driver Release Notes
Version 10.0.12
----------------------------------------------------------------------------
Overview
----------------------------------------------------------------------------
This document describes changes to the Synaptics TouchPad Driver
for Windows 9x & ME, Windows NT, Windows 2000, Windows XP and Vista.
Only external releases have been documented.
Other releases were for internal use, beta tests, or for specific
customer requests. These are not documented here.
----------------------------------------------------------------------------
Version 10.0.12 08/17/2007 (Win2K/WinXP/Vista)
----------------------------------------------------------------------------
Bug Fixes
-Fixed the parameter in SetCurrentDevice to be the device index, not the
device handle.
-Applied NavPoint features for OEM Pnp ID SYN0B0E.
-Check if Vista ahead of send WM_APP message.
-Changed to use WM_APP instead of WM_USER message.
-Chenged to use a different WM_APP message for mouse control.
-Removed a device (could be a real mouse) from the Pnp exclusion list.
-Added SYN0301 to an OEM customers INF file.
-Added an empty string check before we attempt to convert the path resource
ID to an integer for OSD settings. If the string is empty, we skip and
retrieve the next token.
-Changed 2 other implementations of the tokenize function to check for
empty strings.
-Fixed a bug where in Vista x64 SynTPStart could not bring up the
Enhancments application (SyntpEnh.exe).
-Added basic On Screen Button click code for OSD. At this stage we can
determine which object we have clicked on, but no action is being
performed yet.
-Added a new Pnp ID SYN1911 for an OEM customer.
-Added the "Disable internal pointing device when external USB pointing
device is attached" feature to the settings for OEM Pnp ID SYN0A0D.
-Added a new Pnp ID SYN014C for an OEM customer.
----------------------------------------------------------------------------
Version 10.0.11 08/10/2007 (Win2K/WinXP/Vista)
----------------------------------------------------------------------------
Bug Fixes
-Merged OSD branch into trunk.
-Fixed garbage characters in SynDiag LOG file in registry info.
-Fixed SynDiag log file in Japanese OS so it no longer gets garbage
chararacters for KTL log section.
-Added OEM PNP ID as per OEM request.
-Added USB touch panel devices to the exclusion list.
-Fixed a bug where we were sometimes unable to collect the daignostic
log file in Vista.
-Added OEM PNP ID as per OEM request.
-Added a new PnPID for an OEM customer.
-Add SYN1601 to an OEM customers INF file.
-Added a new USB HID to the exclusion list for an OEM customer.
-Added PNPID SYN0D05 to an OEM customers INF file.
-Fixed a bug in DoMouseActivate to get correct parameters.
-Added an OEM data file change and re-WHQL request.
-Added code to allow KBC disable feature to override API disable feature.
-Removed USB from NavPoint INF file settings.

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo Mxxx Series

Model

Clevo M548SR

Description

LAN Drivers

Operating System

Windows Vista 32/64 bits

Version

3.72.0.457

Size Driver

1.5MB

File Name

lan_v.zip

Observations

Realtek 8169/8168/8101 PCI/PCIe NDIS6 driver (for Windows Vista)
------------------------------------------------

Version 6.197.0917.2007

1. Open LargeSend Offload Version 2 options

Largesend Offload version 2 supports both Ipv4 and Ipv6

DO NOT CHANGE THOSE SETTINGS for 8111C

Large Send Offload (IPv4) = Enabled
Large Send Offload v2 (IPv4) = Disabled
Large Send Offload v2 (IPv6) = Enabled

2. Enable Receiving-Side Scaling (default setting)

3. OID_GEN_VENDOR_DESCRIPTION has more detail description for various NIC

Some ethernet packets capture tool need this OID to have detail description

4. Support BaseCpuNumber for RSS (8111C)

Thus, quad-core CPU could use RSS now.

2 cores, 4 cores, 8 cores, 16 cores and 32 cores all support RSS.

Previous version only enable RSS when running on a dual-core machine.

5. Add reset mechanism for BIOS PCI-reset (8111C, 8102E)

This is for overclock. 8102E is not supported by this verision.

6. New PHY parameter (8111C)

Advanced link down power saving
------------------------------------------------

Version 6.196.0803.2007

For 8168C users, please update to this version.

1. New powersaving feature

Lowest link speed when sleep or shutdown

This feature only valid when speed and duplex is auto-neg

If link partner support 10 Mbps : 10 half / 10 full NWAY
If link partner does not support 10 Mbps : 10 half / 10 full / 100 half / 100 full NWAY

2. Remove option - Sleep WOL Power Saving

3. Add VistaCDM diagnostic routine for register read/write test

4. Fix driver bug : performance test tool may stop to test
------------------------------------------------

Version 6.195.0625.2007

1. Improve copy file speed on the platform with very slow CPU

2. Fix PHY speed changed bug: Force to 10Mbps but S3/S4 change to 100Mbps.

This is because driver change to 10/100 auto neg mode when S3/S4.

3. Fix incorrect WOL behavior on a specific notebook (S3 enabled but S4 disabled)

4. Add VistaPE diagnostic routine to check interrupt.

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo Mxxx Series

Model

Clevo M548SR

Description

LAN Drivers

Operating System

Windows XP

Version

3.72.0.457

Size Driver

895KB

File Name

lan.zip

Observations

How to use this RTLSetup Utility
---------------------------------
For Windows ME:

1. If the Operating System's New Hardware Wizard prompts you that
"New Hardware Found" for the "PCI Ethernet Controller", you should
click "Next" until "Finish" is clicked and without specifying
location of the driver. You will see the "PCI Ethernet Controller"
in the Device Manager.

2. Then you can install or update the NDIS driver with "setup" or
"setup -s" command:
a) setup: The InstallShield will prompt you the steps to install
or upgrade the driver.

b) setup -s: The InstallShield will complete the installation or
upgrade without prompting you any instruction.

You need to reboot the system immediately after the Install shield
completes the installation/upgrade.

3. Do not click "Cancel" during New Hardware Wizard searches for the
driver.

4. You can remove RTLSetup utility from Add/Remove Program Palette in
Control Panel, the InstallShield will prompt you the steps to remove
the driver. After remove the driver, please restart the system
immediately.

For Windows 2000/XP:

1. If the Operating System's Found New Hardware Wizard prompts you that
"New Hardware Found" for the "Ethernet Controller", you should click
"Next" until "Finish" is clicked and without specifying location of
the driver. You will see the "Ethernet Controller" in the Device
Manager.

2. Then you can install or upgrade the NDIS driver with "setup" or
"setup -s" command:
a) setup: The InstallShield will prompt you the steps to install
or upgrade the driver.

b) setup -s: The InstallShield will complete the installation or
upgrade without prompting you any instruction.

3. You can remove RTLSetup utility from Add/Remove Program Palette in
Control Panel, the InstallShield will prompt you the steps to remove
the driver. After remove the driver, please restart the system
immediately if you want your networking to be re-installed.

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo Mxxx Series

Model

Clevo M548SR

Description

Video Drivers

Operating System

Windows XP

Version

61410124

Size Driver

9.7MB

File Name

video.zip

Observations

SiS AGP Driver ReadMe.Txt
for
Win2000/XP/ME/98

The SiS AGP driver is installed for AGP bus used by VGA Card.It offer efficient
functions for VGA driver.With installation of AGP driver,it provide high
performance and good compatibility for different hardware.
This package include four parts.
1. WinXP/Win2000 AGP filter driver: Which can support AGP 8x chipset if chipset and VGA card support.
2. WinME/Win98 AGP miniport driver:Which can support AGP 8x chipset if chipset and VGA card support.
3. Some Windows patches:
SIS_LIB.DLL,SISPORT.SYS (winxp) : they are used for reading PCI port.
SiSUSBrg.exe (winxp): Add registry for USB bug under WinXP
Mp_s3.exe (WinME):Patch old SiS 961 FERR bug
Openhci.sys (Win98):Provided by Microsoft to update Win98 USB OHCI
4. Execute ata133.exe for IDE to let IDE support UDMA 133 (XP) and 48bit Capacity of
HD.It also set IDE device to run UDMA as possible.
5. SisAGP utility setting AGP transfer rate only used in SIS AGP new driver.

CONTENTS
***********************
1) System Requirements
2) Windows 2000/Windows XP/Windows 98/Windows ME Driver
3) Package Version Identify
4) Silent Install Driver
5) Verifying Installation of the Driver

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo Mxxx Series

Model

Clevo M548SR

Description

FingerPrint Drivers

Operating System

Windows XP

Version

1.9.2.0093

Size Driver

40.8MB

File Name

fingerprint.zip

Observations

WHAT'S IN THIS FILE

- What is Protector Suite QL
- Installation
- Silent Install
- SMS Install
- Documentation
- Known Problems

___________________________________________________________________
WHAT IS PROTECTOR SUITE QL

Protector Suite QL is a desktop security and convenience product
for Windows 2000, XP and Vista. Its components provide an easy
and convenient access to your computer, web pages, and sensitive
files using a biometric device. The product is designed
to be extremely easy to install and to use.

Protector Suite QL enables
- fingerprint logon (with boot security support for strip sensor)
- fingerprint fast user switching (on Windows XP/Vista)
- accessing web pages and replaying forms using your fingerprint
- registering dialogs
- storing and accessing your sensitive files in a special "File Safe" archive using your fingerprints
- launching favorite application using your fingerprints

_____________________
INSTALLATION

Protector Suite QL installation is carried out by the Setup
wizard. It is recommended to read explaining texts in wizard
screens to avoid potential problems. The detailed description of
the installation procedure can be found in the user documentation.

Authentication hardware is installed together with the whole product.
If you use an external type of hardware, connect it after you install
the software part. You will be asked to do so after you reboot
the computer after installation and log on your computer. If any problems,
drivers and instructions can be found in tc-driver folder.

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo Mxxx Series

Model

Clevo M548SR

Description

RTL8187 WLAN Drivers

Operating System

Windows XP

Version

5.1234.719

Size Driver

1.4MB

File Name

wlan.zip

Observations

Table of Contents
Regulatory Information________________________________________________2
1. Welcome __________________________________________________________4
1.1 Main Features of WLAN USB Module______________________________5
1.2 Wireless Networking Scenarios ____________________________________6
1.3 Advantages for Using Wireless Network ____________________________8
2. Quick Start to Wireless Networking ____________________________________9
2.1 Installation_____________________________________________________9
2.2 Connecting to an Exiting Network ________________________________10
2.3 Additional Note for Windows XP _________________________________ 11
3. Step-by-Step Installation Guide_______________________________________12
3.1 Install the IEEE802.11b WLAN Driver / Utility _____________________13
3.1.1 Additional Setup Processes________________________________16
3.2 Verifying the Driver/Utility ______________________________________17
3.3 IEEE802.11b USB WLAN Utility _________________________________17
3.3.1 Disable Windows XP Zero-Configuration __________________19
3.4 Basic Setting for Infrastructure Mode _____________________________20
3.5 Basic Setting for 802.11Ad Hoc Mode/Ad Hoc Mode _________________21
3.6 Advanced Settings______________________________________________23
3.7 Encryption Function____________________________________________24
3.8 Uninstall the IEEE802.11b USB WLAN Utility / Driver_______________26
4. Using the Utility ___________________________________________________27
4.1 LAN Status Tab________________________________________________27
4.2 Link Information Tab___________________________________________28
4.3 Site Survey Tab ________________________________________________28
4.4 Diagnostic Tab_________________________________________________29
4.5 About Tab ____________________________________________________29
5. Network Application _______________________________________________30
5.1 Surveying the Network Neighborhood _____________________________30

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo Mxxx Series

Model

Clevo M548SR

Description

Card reader Drivers

Operating System

Windows XP

Version

3.00.07

Size Driver

747KB

File Name

creader.zip

Observations

ENE MR510 / CB-712/714 Full Package Release Note
*************************************************
Version : 3.00.07
Date : 2007-07-09

OS :
Vista64, Vista, WinXP64, WinXP, Win2000, WinME, Win9X

Product :
MR510 / CB-712/714 Setup Shield
All OS : 2.00.02
CB714 Cardbus INF Update
Vista/64 : 3.00.01
WinXP/2k : 3.00.01
WinXP64 : 2.00.08
WinME/9x : 2.00.01
MR510 / CB-712/714 SecureDigital Card Reader Driver
Vista64 : 2.00.04
Vista : 2.00.02
WinXP/2k : 2.00.02
WinXP64 : 1.07.00
WinME/9x : 1.01.00
MR510 / CB-712/714 Memory Stick Card Reader Driver
Vista64 : 2.00.03
Vista : 2.00.02
WinXP/2k : 2.00.02
WinXP64 : 1.07.00
WinME/9x : 1.01.00
MR510 / CB-712/714 SmartMedia/XD Card Reader Driver
Vista/64 : 2.00.02
WinXP/2k : 2.00.02
WinXP64 : 1.07.00
WinME/9x : 1.01.00

WHQL Vista32/64 submission ID :
Cardbus INF : 1233857
SecureDigital : 1256082
Memory Stick : 1256073
SmartMedia/XD : 1241407

WHQL WinXP submission ID :
Cardbus INF : 1241409
SecureDigital : 1241409
Memory Stick : 1241409
SmartMedia/XD : 1241409

WHQL WinXP64 submission ID :
Cardbus INF : 1048034
SecureDigital : 1048034
Memory Stick : 1048034
SmartMedia/XD : 1048034
Product : ENE MR510 / CB-712/714 Setup Shield
*******************************************
OS:
Vista64, Vista, WinXP64, WinXP, Win2000, WinME, Win9X
===== Release note =====
Version : 2.00.04 (SD), 2.00.03 (MS)
Date : 2007-07-09
1. For Vista64 ,new DMA way to support when system memory upper 4G.
===== Release note =====
Version : 2.00.02
Date : 2007-03-01
1. Fix bug --- Fix Program Compatibility Assistant (PCA) warning dialog issue when User Account Control (UAC) is enable.

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo Mxxx Series

Model

Clevo M548SR

Description

Chipset Drivers

Operating System

Windows XP

Version

2.90A

Size Driver

5MB

File Name

chipset.zip

Observations

This document contains the following sections:

1. Overview
2. System Requirements
3. Contents of the Distribution Package
4. List of Available Command Line Flag Options
5. Contents of the Extracted Files
6. Installing the Software in Interactive Mode
7. Installing the Software in Silent Mode
8. Installing the INF Files Prior to OS Installation
8A. Installing the Windows* 2000 INF Files Prior
to OS Installation
8B. Installing the Windows* 98/Windows 98 SE/Windows* Me
INF Files Prior to OS Installation
8C. Installing the Windows* 95 INF Files Prior to OS
Installation
9. Installing the INF Files After OS Installation
9A. Installing the Windows* 2000 INF Files after
OS Installation
9B. Installing the Windows* 98/Windows* 98 SE/
Windows* Me/Windows* 95 INF Files after OS
Installation
10. Verifying Installation of the Software
11. Identifying the Software Version Number
12. Troubleshooting

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo Mxxx Series

Model

Clevo M548SR

Description

Modem Drivers

Operating System

Windows XP

Version

6.12.06

Size Driver

2.3MB

File Name

modem.zip

Observations

To print README.TXT, open it in Windows Write, Microsoft Word,
or another word processor. Then select the entire document
and format the text in 10-point Courier before printing.

This file (README.TXT) contains:

--------
Contents
--------
1) Quick Start
2) How to verify installation
3) Uninstall procedure
4) Update procedure
5) Country selection
6) Call Progress Sounds
7) Known issues
8) Troubleshooting
9) Disclaimers

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo Mxxx Series

Model

Clevo M548SR

Description

Audio Drivers

Operating System

Windows XP

Version

660011260

Size Driver

13.8MB

File Name

audio.zip

Observations

Realtek Semiconductor Corp. AC'97 Sound System Software ver:A3.43
Installation and Setup

Driver & Application Installation/Removal Procedure For Realtek AC'97 Codec:
=================================================================================

<<< For Win2000/WinME/WinXP (WDM driver)/Win98 Gold(First Edition)/Win98SE >>>

---------------------------------------
Setup Driver/Application at first time:
---------------------------------------

Step 1. Before installing the Realtek AC'97 Drivers & Applications, Press the
[Cancel] button if Windows detect the PCI Multimedia Audio device.

Step 2. Insert the "Realtek AC'97 Drivers & Applications" CD into the CD-ROM
drive and run the setup.exe program to finish the installation.

Step 3. Click on [Next/OK/Go] to continue the procedure. If the Windows popup
"Digital Signature Not Found" message, press [Yes] to continue the
installation.

Step 4. Finally, select to restart the system and press [Finish] to complete
the installation.

The system will reload the drivers and do some adjustments in the INF
file if so required.

--------------------------
Update Driver/Application:
--------------------------

Step 1. Follow Step 2,3,4 described in [Setup at first time] above to complete
the procedure.

--------------------------
Remove Driver/Application:
--------------------------

Step 1. Go to Start\Settings\Control Panel.

Step 2. Select [Add/Remove Programs] icon.

Step 3. Select "Realtek AC'97 Drivers and Applications" and press [Change/Remove]
button.

Step 4. Click on [Next/OK/Go] to finish the uninstallation.

Step 5. At the end of the procedure, select to restart the system and press
[Finish] to complete the uninstallation.

<<< For WinNT 4.0 (NT4 driver) >>>

Access to Official Website Clevo

Home English Drivers English

Welcome to the HelpDrivers, driver for printers.

Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more

You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.

Do not rename the file you're downloading, it may cause installation problems.

Available 26 files for Clevo M548SR

Select Files