Clevo 888E Notebooks & Tablet PCs > Downloads Drivers, Manual and Firmware

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo 8xxx Series

Model

Clevo 888E

Description

MDC MODEM Drivers

Operating System

Windows 2000

Version

3.20.02

Size Driver

2.7MB

File Name

888e_mdc_2k.zip

Observations

To print README.TXT, open it in Windows Write, Microsoft Word,
or another word processor. Then select the entire document
and format the text in 10-point Courier before printing.

This file (README.TXT) contains:

--------
Contents
--------
1) Quick Start
2) How to verify installation
3) Uninstall procedure
4) Update procedure
5) Country selection
6) Call Progress Sounds
7) Known issues
8) Troubleshooting
9) Disclaimers

--------------
1. Quick Start
--------------

1) This driver supports HAMR5600, SmartRiser56, SmartPCI56,
SmartPCI561 and SmartLAN56 modem chipsets.

2) For HAMR5600 and SmartRiser56, this driver is compatible with
motherboards based on Intel 810, 820, 815E, 820E, 845, 850, ICH4,
440MX (Banister), VIA VT82C686, VIA KT266, VIA 8231, SiS 540/630/96x,
NVidia MCP and ALI M1535/M1535D+ core logic chipsets.

All riser card form factors are supported (AMR/MDC, CNR and ACR).

For up-to-date information about compatible motherboards, turn
to Smart Link web site (www.smlink.com).

3) This version of drivers is only compatible with Microsoft
Windows XP or Windows 2000.

4) If any type of Smart Link modem is already installed in your
system and you want to update its' device driver, first
uninstall existing drivers (See Uninstall Procedure), and only
then proceed to install the new drivers.

5) Before installing a riser card modem, check your card for proper
jumper setting of Primary or Secondary Codec Mode. PCI modems
usually won't have jumpers.

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo 8xxx Series

Model

Clevo 888E

Description

Touch Pad Drivers

Operating System

Windows 2000-XP

Version

6.7.15.0

Size Driver

8.2MB

File Name

888e_tp.zip

Observations

Synaptics Touchpad Driver for Windows 2000 / WinXP
Installation Notes
Version 6.7.13

1. Installing the Synaptics TouchPad Driver
-------------------------------------------

This driver requires Windows 2000 / WinXP.

NOTE REGARDING SAVING OF SETTINGS:
----------------------------------
Windows 2000 / WinXP does not save any of the user settings for users
belonging to the "Guests" user group. This includes special TouchPad
settings as well as all other user settings. If you want your
settings to be saved, make sure your user account does not belong to
the "Guests" group using the User Manager program (you must be
Administrator to change user settings).

NOTE REGARDING MULTIPROCESSOR MACHINES:
---------------------------------------
Though we believe it should work, this driver has not been tested on
any multiprocessor machines.

Installation procedure
-------------------------------------------------------
First, if you have a new TouchPad, plug it in and reboot Windows 2000 /
WinXP. Windows 2000 / WinXP will then detect your new TouchPad and
install a standard mouse driver to handle it. You cannot install the
Synaptics TouchPad driver until this process is complete and your
TouchPad is functioning as a normal pointing device.

Log on to your system as "Administrator", or as another user with
administrator privileges.

Run "Setup.exe". This program will automatically install the Synaptics
TouchPad driver to handle all PS/2 and Serial pointing devices
attached to your computer.

You will need to restart Windows after the installation is complete.
If the driver has been installed correctly, after you have restarted
Windows you should see the TouchPad Icon in your task bar next to the
clock. Also, a dialog box entitled "Information about your TouchPad"
will pop up. You can prevent this dialog box from coming up in the
future by checking the "Stop showing me this message" checkbox.

For help using your TouchPad, choose "Tell me more..." from the
"Information about your TouchPad" dialog box, or double-click on the
TouchPad Icon in your task bar, and click on the "Help" button.

If you wish to change one or more of your pointing devices to using
a standard Microsoft or other third party driver, you should bring
up the Mouse control panel, and select the "Hardware" tab. From there,
select the pointing device you want to change and click "Properties".
Select the "Driver" tab and Click "Update Driver...". Follow the
instructions to install a new driver.

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo 8xxx Series

Model

Clevo 888E

Description

LAN Drivers

Operating System

Windows 2000-XP

Version

1.07.37

Size Driver

954KB

File Name

888e_lan.zip

Observations

How to use this RTLSetup Utility
---------------------------------
For Windows ME:

1. If the Operating System's New Hardware Wizard prompts you that
"New Hardware Found" for the "PCI Ethernet Controller", you should
click "Next" until "Finish" is clicked and without specifying
location of the driver. You will see the "PCI Ethernet Controller"
in the Device Manager.

2. Then you can install or update the NDIS driver with "setup" or
"setup -s" command:
a) setup: The InstallShield will prompt you the steps to install
or upgrade the driver.

b) setup -s: The InstallShield will complete the installation or
upgrade without prompting you any instruction.

You need to reboot the system immediately after the Install shield
completes the installation/upgrade.

3. Do not click "Cancel" during New Hardware Wizard searches for the
driver.

4. You can remove RTLSetup utility from Add/Remove Program Palette in
Control Panel, the InstallShield will prompt you the steps to remove
the driver. After remove the driver, please restart the system
immediately.

For Windows 2000/XP:

1. If the Operating System's Found New Hardware Wizard prompts you that
"New Hardware Found" for the "Ethernet Controller", you should click
"Next" until "Finish" is clicked and without specifying location of
the driver. You will see the "Ethernet Controller" in the Device
Manager.

2. Then you can install or upgrade the NDIS driver with "setup" or
"setup -s" command:
a) setup: The InstallShield will prompt you the steps to install
or upgrade the driver.

b) setup -s: The InstallShield will complete the installation or
upgrade without prompting you any instruction.

3. You can remove RTLSetup utility from Add/Remove Program Palette in
Control Panel, the InstallShield will prompt you the steps to remove
the driver. After remove the driver, please restart the system
immediately if you want your networking to be re-installed.

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo 8xxx Series

Model

Clevo 888E

Description

USB 2.0 Drivers

Operating System

Windows 2000-XP

Version

2.46

Size Driver

12.8MB

File Name

888e_usb20.zip

Observations

VIA USB 2.0 Host Controller Driver Package, Multilingual Edition
==============================================================

1) Driver Name: VIA USB 2.0 Host Controller Driver Package, Multilingual Edition

2) Description: There are 3 different drivers inside this package.
1. Microsoft USB 2.0 Host Controller Driver for Windows XP
2. Microsoft USB 2.0 Host Controller Driver for Windows 2000
3. VIA USB 2.0 Host Controller Driver for Windows Me and Windows 98/SE

3) Release Date: 2002/08/30

4) Revision Number:
1. VIA USB 2.0 Setup Program: 2.46
2. Microsoft Driver for Windows XP: 5.1.2600.41
3. Microsoft Driver for Windows 2000: 5.0.2195.5652
4. VIA Driver for Windows Me and Windows 98/SE: 4.90.3000.2

5) Supported VIA USB 2.0 Host Controllers:
1. VT6202 (4-Port USB 2.0 Host Controller, Discrete PCI Adapter)
2. *VT8235* (6-Port USB 2.0 Host Controller, Integrated South Bridge)

6) Directory Layout: There are 1 subdirectory inside this package.
\Win98&Me: VIA USB 2.0 Host Controller Driver and Filter Drivers for
Windows Me and Windows 98/SE are put inside.

NOTE: In order to conform to the redistribution agreement between Microsoft
and VIA, You can ONLY use SETUP.EXE to install driver in Windows XP
and Windows 2000.

7) Driver installation:

a) Windows XP

Setup will install Microsoft USB 2.0 Host Controller Driver.

*************************
** Driver Installation **
*************************

Click the SETUP.EXE program and select "Install" button then it will install
the "Microsoft USB 2.0 Host Controller Driver" automatically on your Windows XP
system. It will copy the driver to the system folder and set the related registry
tree. (Setup Program will also install the QFE [Hotfix Q312370] package FIRST.
You do NOT need to do it by yourself).

***************************
** Driver Uninstallation **
***************************

You could remove the "Microsoft USB 2.0 Host Controller Driver" by selecting
the "Uninstall" button. It will completely remove the driver from the sytsem.

b) Windows 2000

Setup will install Microsoft USB 2.0 Host Controller Driver.

*************************
** Driver Installation **
*************************

Click the SETUP.EXE program and select "Install" button then it will install
the "Microsoft USB 2.0 Host Controller Driver" automatically on your Windows 2000
system. It will copy the driver to the system folder and set the related registry
tree.

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo 8xxx Series

Model

Clevo 888E

Description

IP Share Drivers

Operating System

Windows 2000-XP

Version

6.12.22

Size Driver

13.1MB

File Name

888e_ipshare.zip

Observations

Table of Content
INTRODUCTION.................................................................................................................. 1
SAMPLE APPLICATION........................................................................................................... 2
FEATURES............................................................................................................................. 2
PARTS NAMES AND FUNCTIONS............................................................................................. 3
SYSTEM REQUIREMENTS ....................................................................................................... 5
MANAGEMENT TOOL ....................................................................................................... 5
SYSTEM REQUIREMENTS................................................................................................ 5
FACTORY DEFAULT SETTINGS ..................................................................................... 6
PASSWORD ............................................................................................................................ 6
LOCAL AND GLOBAL PORT ADDRESSES ................................................................................ 6
INFORMATION FROM ISP ....................................................................................................... 6
CONFIGURATION VIA WEB............................................................................................. 8
GLOBAL PORT ....................................................................................................................... 9
CATV dynamic Mode........................................................................................................ 9
PPPoE (DSL dynamic Mode)......................................................................................... 10
Static Mode..................................................................................................................... 11
LOCAL PORT........................................................................................................................ 13
ADVANCED SETUP............................................................................................................... 15
Management ................................................................................................................... 15
Virtual Server ................................................................................................................. 17
Packet Filters.................................................................................................................. 19
Static Router ................................................................................................................... 22
Check E-Mail.................................................................................................................. 23
Dynamic DNS ................................................................................................................. 24
NETWORK STATUS .............................................................................................................. 26
WAN IP Status ................................................................................................................ 26
Sessions List.................................................................................................................... 26
Users List........................................................................................................................ 27

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo 8xxx Series

Model

Clevo 888E

Description

Audio Drivers

Operating System

Windows 2000-XP

Version

3800

Size Driver

8.1MB

File Name

888e_audio.zip

Observations

Avance Logic AC'97 Sound System Software ver: A2.61
Installation and Setup
Driver & Application Installation/Removal Procedure For Avance AC'97 Codec:
=================================================================================

<<< For Win98/Win2000/WinME (WDM driver) >>>

---------------------------------------
Setup Driver/Application at first time:
---------------------------------------

Step 1. Before installing the Avance AC'97 Drivers & Applications, Press the
[Cancel] button if Windows detect the PCI Multimedia Audio device.

Step 2. Insert the "Avance AC'97 Drivers & Applications" CD into the CD-ROM
drive and run the setup.exe program to finish the installation.

Step 3. Click on [Next/OK/Go] to continue the procedure. If the Windows popup
"Digital Signature Not Found" message, press [Yes] to continue the
installation.

Step 4. Finally, select to restart the system and press [Finish] to complete
the installation.

The system will reload the drivers and do some adjustments in the INF
file if so required.

--------------------------
Update Driver/Application:
--------------------------

Step 1. Follow Step 2,3,4 described in [Setup at first time] above to complete
the procedure.

--------------------------
Remove Driver/Application:
--------------------------

Step 1. Go to Start\Settings\Control Panel.

Step 2. Select [Add/Remove Programs] icon.

Step 3. Select "Avance AC'97 Drivers and Applications" and press [Change/Remove]
button.

Step 4. Click on [Next/OK/Go] to finish the uninstallation.

Step 5. At the end of the procedure, select to restart the system and press
[Finish] to complete the uninstallation.
<<< For WinNT 4.0 (NT4 driver) >>>

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo 8xxx Series

Model

Clevo 888E

Description

MDC MODEM Drivers

Operating System

Windows XP

Version

3.20.02

Size Driver

2.7MB

File Name

888e_mdc_xp.zip

Observations

Access to Official Website Clevo

Home English Drivers English

Welcome to the HelpDrivers, driver for printers.

Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more

You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.

Do not rename the file you're downloading, it may cause installation problems.

Available 17 files for Clevo 888E

Select Files