Available 17 files for Clevo 5600P
Select Files
Company
Clevo
Categories
Notebooks & Tablet PCs
Serie
Clevo 5xxx Series
Model
Clevo 5600P
Description
Video Drivers (It is necessary to upgrade system BIOS to 1.01.09 or later version)
Operating System
Windows 2000
Version
769-C3
Size Driver
34.9MB
File Name
56video_2k.zip
Company
Clevo
Categories
Notebooks & Tablet PCs
Serie
Clevo 5xxx Series
Model
Clevo 5600P
Description
First released version touch pad Drivers
Operating System
Windows 2000
Version
5.4.3
Size Driver
616KB
File Name
m22s_touchpad_w2k.zip
Observations
Alps Pointing-device Driver provides a convenient way to modify
setting for Alps Pointing-device. The Alps Pointing-device Driver
is compatible with most standard mice and similar pointing devices.
____________________________________________________________
CONTENTS:
1. Driver Installation for Windows 2000/XP
2. Using the Alps Pointing-device Property Sheets
3. Files On the Setup Disk
Company
Clevo
Categories
Notebooks & Tablet PCs
Serie
Clevo 5xxx Series
Model
Clevo 5600P
Description
TouchPad Drivers
Operating System
Windows 98Se
Version
6.0.1
Size Driver
7MB
File Name
touchpad_98se.zip
Observations
Synaptics Touchpad Driver Installation Notes
Version 6.0.1
Contents
--------
1. Installing the Synaptics TouchPad Driver.
2. Personal Computer and Windows 95 Configuration Issues.
3. Other potential conflicts with the TouchPad Driver.
1. Installing the Synaptics TouchPad Driver
-------------------------------------------
First, make sure that your Synaptics TouchPad is connected
to your system (a driver will be installed for each currently
connected TouchPad).
If you have received your driver distribution in the form of a
self-extracting archive, then you must first extract the installation
files from the archive. Execute the self-extracting archive file
by double-clicking on it from Explorer, running it from the Start/Run
dialog, or running it from a DOS box command prompt.
Next, run the Setup.exe program, which automatically installs the
driver on your computer. You can run this program either from a DOS box
by going to the directory that contains the driver files and typing "setup",
or using Start/Run and running setup (e.g. if the driver files are on a
floppy disk in the A: drive, you would type "A:\setup"), or by exploring
the directory containing the driver files and double clicking on the
Setup.exe program.
If the driver has been installed correctly, after you have restarted
Windows you should see the TouchPad Icon in your task bar next to the
clock. Also, a dialog box entitled "Information about your TouchPad"
will pop up. You can prevent this dialog box from coming up in the
future by checking the "Stop showing me this message" checkbox.
For help on using the advanced features of your Synaptics TouchPad,
choose "Tell me more..." from the "Information about your TouchPad"
dialog box, or double-click on the TouchPad Icon in your task bar,
and click on the "Help" button.
Company
Clevo
Categories
Notebooks & Tablet PCs
Serie
Clevo 5xxx Series
Model
Clevo 5600P
Description
Video Drivers (It is necessary to upgrade system BIOS to 1.01.09 or later version)
Operating System
Windows 98Se-Me
Version
769-C3
Size Driver
36MB
File Name
56video_me_98.zip
Company
Clevo
Categories
Notebooks & Tablet PCs
Serie
Clevo 5xxx Series
Model
Clevo 5600P
Description
Audio Drivers
Operating System
Windows 98Se-Me-2000-XP
Version
51003800
Size Driver
14.5MB
File Name
audio_all.zip
Observations
Avance Logic AC'97 Sound System Software ver: A2.60
Installation and Setup
Driver & Application Installation/Removal Procedure For Avance AC'97 Codec:
=================================================================================
<<< For Win98/Win2000/WinME (WDM driver) >>>
---------------------------------------
Setup Driver/Application at first time:
---------------------------------------
Step 1. Before installing the Avance AC'97 Drivers & Applications, Press the
[Cancel] button if Windows detect the PCI Multimedia Audio device.
Step 2. Insert the "Avance AC'97 Drivers & Applications" CD into the CD-ROM
drive and run the setup.exe program to finish the installation.
Step 3. Click on [Next/OK/Go] to continue the procedure. If the Windows popup
"Digital Signature Not Found" message, press [Yes] to continue the
installation.
Step 4. Finally, select to restart the system and press [Finish] to complete
the installation.
The system will reload the drivers and do some adjustments in the INF
file if so required.
--------------------------
Update Driver/Application:
--------------------------
Step 1. Follow Step 2,3,4 described in [Setup at first time] above to complete
the procedure.
--------------------------
Remove Driver/Application:
--------------------------
Step 1. Go to Start\Settings\Control Panel.
Step 2. Select [Add/Remove Programs] icon.
Step 3. Select "Avance AC'97 Drivers and Applications" and press [Change/Remove]
button.
Step 4. Click on [Next/OK/Go] to finish the uninstallation.
Step 5. At the end of the procedure, select to restart the system and press
[Finish] to complete the uninstallation.
<<< For WinNT 4.0 (NT4 driver) >>>
Company
Clevo
Categories
Notebooks & Tablet PCs
Serie
Clevo 5xxx Series
Model
Clevo 5600P
Description
E-Mail reminder LED Drivers
Operating System
Windows 98Se-Me-2000-XP
Version
1.1
Size Driver
1.1MB
File Name
automail.zip
Company
Clevo
Categories
Notebooks & Tablet PCs
Serie
Clevo 5xxx Series
Model
Clevo 5600P
Description
Intel 845MP Drivers
Operating System
Windows 98Se-Me-2000-XP
Version
3.20.1008
Size Driver
1.6MB
File Name
chipset.zip
Observations
This document contains the following sections:
1. Overview
2. System Requirements
3. Contents of the Distribution Package
4. List of Available Command Line Flag Options
5. Contents of the Extracted Files
6. Installing the Software in Interactive Mode
7. Installing the Software in Silent Mode
8. Installing the INF Files Prior to OS Installation
8A. Installing the Windows* 2000 INF Files Prior
to OS Installation
8B. Installing the Windows* 98/Windows 98 SE/Windows* Me
INF Files Prior to OS Installation
8C. Installing the Windows* 95 INF Files Prior to OS
Installation
9. Installing the INF Files After OS Installation
9A. Installing the Windows* 2000 INF Files after
OS Installation
9B. Installing the Windows* 98/Windows* 98 SE/
Windows* Me/Windows* 95 INF Files after OS
Installation
10. Verifying Installation of the Software
11. Identifying the Software Version Number
12. Troubleshooting
Company
Clevo
Categories
Notebooks & Tablet PCs
Serie
Clevo 5xxx Series
Model
Clevo 5600P
Description
Internal modem Drivers
Operating System
Windows 98Se-Me-2000-XP
Version
2.92.04
Size Driver
9.3MB
File Name
modem_all.zip
Company
Clevo
Categories
Notebooks & Tablet PCs
Serie
Clevo 5xxx Series
Model
Clevo 5600P
Description
LAN Drivers
Operating System
Windows 98Se-Me-2000-XP
Version
53970823
Size Driver
99KB
File Name
lan_all.zip
Observations
SiS PCI Fast Ethernet Adapter Driver Setup Utility
for Windows 9X/ME/2000/XP Driver
==================================================
Note for using this Setup Utility
---------------------------------
For Windows 98/98SE/ME/2000/XP:
--------------------------------
Install the driver with "setup" or "setup -s" command:
1. setup: The Install shield will prompt you the steps to install
the driver.
2. setup -s: The Install shield will complete the installation
without prompting you any instruction.
--------------------
For Windows 95/OSR2:
--------------------
1. If the Operating System's New Hardware Wizard prompts you that
"New Hardware Found" for the PCI Ethernet Controller, you should
click "Next" until "Finish" is clicked without specifying location
of the driver. You will see the "PCI Ethernet Controller" in the
Device Manager.
2. Then you can install the driver with "setup" or "setup -s" command:
a) setup: The Install shield will prompt you the steps to install
the driver.
b) setup -s: The Install shield will complete the installation
without prompting you any instruction.
You need to reboot the system immediately after the Install shield
completes the installation.
3. Do not click "Cancel" during New Hardware Wizard searches for the
driver.
4. After remove the driver, please restart the system immediately.
-----------------------
For Windows NT 3.5x/4.0
-----------------------
Do not use this utility in Windows NT 3.5x or 4.0.
Company
Clevo
Categories
Notebooks & Tablet PCs
Serie
Clevo 5xxx Series
Model
Clevo 5600P
Description
Hot-Key application
Operating System
Windows 98Se-Me-2000-XP
Version
1.34
Size Driver
1.7MB
File Name
kbc_ap.zip
Company
Clevo
Categories
Notebooks & Tablet PCs
Serie
Clevo 5xxx Series
Model
Clevo 5600P
Description
Video Drivers (It is necessary to upgrade system BIOS to 1.01.09 or later version)
Operating System
Windows 98Se-Me-2000-XP
Version
769-C3
Size Driver
49.1MB
File Name
56video.zip
Company
Clevo
Categories
Notebooks & Tablet PCs
Serie
Clevo 5xxx Series
Model
Clevo 5600P
Description
Wireless LAN Drivers
Operating System
Windows 98Se-Me-2000-XP
Version
1.07.29
Size Driver
2.1MB
File Name
wireless_lan.zip
Company
Clevo
Categories
Notebooks & Tablet PCs
Serie
Clevo 5xxx Series
Model
Clevo 5600P
Description
TouchPad Drivers
Operating System
Windows 98Se-Me-2000-XP
Version
6.0.1
Size Driver
25.1MB
File Name
touchpad_all.zip
Company
Clevo
Categories
Notebooks & Tablet PCs
Serie
Clevo 5xxx Series
Model
Clevo 5600P
Description
Video Drivers
Operating System
Windows 98Se-Me-2000-XP
Version
777
Size Driver
45.6MB
File Name
56video_all.zip
Company
Clevo
Categories
Notebooks & Tablet PCs
Serie
Clevo 5xxx Series
Model
Clevo 5600P
Description
TouchPad Drivers
Operating System
Windows Me
Version
6.0.1
Size Driver
7MB
File Name
touchpad_me.zip
Observations
Synaptics Touchpad Driver Installation Notes
Version 6.0.1
Contents
--------
1. Installing the Synaptics TouchPad Driver.
2. Personal Computer and Windows 95 Configuration Issues.
3. Other potential conflicts with the TouchPad Driver.
1. Installing the Synaptics TouchPad Driver
-------------------------------------------
First, make sure that your Synaptics TouchPad is connected
to your system (a driver will be installed for each currently
connected TouchPad).
If you have received your driver distribution in the form of a
self-extracting archive, then you must first extract the installation
files from the archive. Execute the self-extracting archive file
by double-clicking on it from Explorer, running it from the Start/Run
dialog, or running it from a DOS box command prompt.
Next, run the Setup.exe program, which automatically installs the
driver on your computer. You can run this program either from a DOS box
by going to the directory that contains the driver files and typing "setup",
or using Start/Run and running setup (e.g. if the driver files are on a
floppy disk in the A: drive, you would type "A:\setup"), or by exploring
the directory containing the driver files and double clicking on the
Setup.exe program.
If the driver has been installed correctly, after you have restarted
Windows you should see the TouchPad Icon in your task bar next to the
clock. Also, a dialog box entitled "Information about your TouchPad"
will pop up. You can prevent this dialog box from coming up in the
future by checking the "Stop showing me this message" checkbox.
For help on using the advanced features of your Synaptics TouchPad,
choose "Tell me more..." from the "Information about your TouchPad"
dialog box, or double-click on the TouchPad Icon in your task bar,
and click on the "Help" button.
Company
Clevo
Categories
Notebooks & Tablet PCs
Serie
Clevo 5xxx Series
Model
Clevo 5600P
Description
TouchPad Drivers
Operating System
Windows XP
Version
6.0.1
Size Driver
5.5MB
File Name
touchpad_xp.zip
Observations
Synaptics Touchpad Driver for Windows 2000
Installation Notes
Version 6.0.1
1. Installing the Synaptics TouchPad Driver
-------------------------------------------
This driver requires Windows 2000.
NOTE REGARDING SAVING OF SETTINGS:
----------------------------------
Windows 2000 does not save any of the user settings for users belonging
to the "Guests" user group. This includes special TouchPad settings as
well as all other user settings. If you want your settings to be saved,
make sure your user account does not belong to the "Guests" group
using the User Manager program (you must be Administrator to change
user settings).
NOTE REGARDING MULTIPROCESSOR MACHINES:
---------------------------------------
Though we believe it should work, this driver has not been tested on
any multiprocessor machines.
Installation procedure
-------------------------------------------------------
First, if you have a new TouchPad, plug it in and reboot Windows 2000.
Windows 2000 will then detect your new TouchPad and install a standard
mouse driver to handle it. You cannot install the Synaptics TouchPad
driver until this process is complete and your TouchPad is functioning
as a normal pointing device.
Log on to your system as "Administrator", or as another user with
administrator privileges.
Run "Setup.exe". This program will automatically install the Synaptics
TouchPad driver to handle all PS/2 and Serial pointing devices
attached to your computer.
You will need to restart Windows after the installation is complete.
If the driver has been installed correctly, after you have restarted
Windows you should see the TouchPad Icon in your task bar next to the
clock. Also, a dialog box entitled "Information about your TouchPad"
will pop up. You can prevent this dialog box from coming up in the
future by checking the "Stop showing me this message" checkbox.
For help using your TouchPad, choose "Tell me more..." from the
"Information about your TouchPad" dialog box, or double-click on the
TouchPad Icon in your task bar, and click on the "Help" button.
If you wish to change one or more of your pointing devices to using
a standard Microsoft or other third party driver, you should bring
up the Mouse control panel, and select the "Hardware" tab. From there,
select the pointing device you want to change and click "Properties".
Select the "Driver" tab and Click "Update Driver...". Follow the
instructions to install a new driver.
Company
Clevo
Categories
Notebooks & Tablet PCs
Serie
Clevo 5xxx Series
Model
Clevo 5600P
Description
Video Drivers (It is necessary to upgrade system BIOS to 1.01.09 or later version)
Operating System
Windows XP
Version
769-C3
Size Driver
34.9MB
File Name
56video_xp.zip
Access to Official Website Clevo
Welcome to the HelpDrivers, driver for printers.
Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more
You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.
Do not rename the file you're downloading, it may cause installation problems.