Available 21 files for Clevo 3400

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo 3xxx Series

Model

Clevo 3400

Description

User Manual

Information

Manual

Operating System

Manual

Version

V3.0

Size Driver

3.2MB

File Name

32user'smanualver3-102899.pdf

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo 3xxx Series

Model

Clevo 3400

Description

CD-ROM utility

Operating System

MS-DOS

Size Driver

704KB

File Name

32cdrom.zip

Observations

This manual describes how to setup the device driver of TOSHIBA ATAPI
CD/DVD-ROM Drive.
This device driver is exclusive use of following TOSHIBA ATAPI CD/DVD-ROM
drives.
XM-5602B, XM-5702B, XM-6002B, XM-6102B, XM-6202B, XM-6302B
XM-1502B, XM-1602B, XM-2402B, XM-1702B, XM-1802B
SD-M1002, SD-M1102, SD-M1202

How to setup the CD-ROM device driver.

1. Copy CD/DVD-ROM device driver to the system disk.

2. Add the following line to CONFIG.SYS of the system disk.
LASTDRIVE=Z
DEVICE=:\CDROMDRV.SYS

3. Add the following line to AUTOEXEC.BAT.
C:\DOS\MSCDEX.EXE /D:

4. Restart computer.

Note:

1. The following is the restrictive item for (/B) (/DMA) option switch.
(1) Driver supports DMA transfer only when Intel Triton and Triton2 PCI Chip
Set.
(2) When application buffer address (store CD/DVD-ROM data) is not word
align, the driver will not DMA trnasfer. (Use PIO transfer)
(3) When doing DMA transfer with Intel Triton2 PCI chip set, use EMM386.EXE
version is more than 4.49.
(EMM386.EXE Version4.49 should be in MS-DOS 6.22.)

2. Port and IRQ used by this driver often can not run successfully when
conflicting with the drives (and drivers) of other companies.

***** About the TEAC CD Player *****

Before installing the TEAC CD Player onto Windows, please carefully
read the following notes:
1. About the Install Options

When you execute the TEAC CD Player's setup program (SETUP.EXE),
a message will appear asking you to select one of the following two
options:

a) AUTOPLAY ON

With AUTOPLAY ON, the TEAC CD Player will start up and begin playing
automatically when you load a music CD. If you select this option,
you will need to take certain precautions when uninstalling the TEAC
CD Player. For details of these precautions, see "2. Precautions When
Uninstalling".

b) AUTOPLAY OFF

With AUTOPLAY OFF, the Microsoft CD Player will start up and begin
playing automatically when you load a music CD. To use the TEAC
CD Player, you will need to quit the Microsoft CD Player program and
start up the TEAC CD Player.
If you want the TEAC CD Player to start up automatically, you should
select option a) when installing the program.

2. Precautions When Uninstalling

3. How to Reinstall the Microsoft CD Player

Even if you were using the Microsoft CD Player before installing
the TEAC CD Player, uninstalling the TEAC CD Player may not necessarily
allow you to use the Microsoft CD Player on Autoplay.
If you want the Microsoft CD Player to start up and begin playing
automatically when you load a music CD, use the following procedure
to reinstall the Microsoft CD Playe

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo 3xxx Series

Model

Clevo 3400

Description

DVD ROM utility

Operating System

MS-DOS

Size Driver

87KB

File Name

32dvd.zip

Observations

This manual describes how to setup the device driver of TOSHIBA ATAPI
CD/DVD-ROM Drive.
This device driver is exclusive use of following TOSHIBA ATAPI CD/DVD-ROM
drives.
XM-5602B, XM-5702B, XM-6002B, XM-6102B, XM-6202B, XM-6302B
XM-1502B, XM-1602B, XM-2402B, XM-1702B, XM-1802B
SD-M1002, SD-M1102, SD-M1202
How to setup the CD-ROM device driver.

1. Copy CD/DVD-ROM device driver to the system disk.

2. Add the following line to CONFIG.SYS of the system disk.
LASTDRIVE=Z
DEVICE=:\CDROMDRV.SYS

3. Add the following line to AUTOEXEC.BAT.
C:\DOS\MSCDEX.EXE /D:

4. Restart computer.
Note:

1. The following is the restrictive item for (/B) (/DMA) option switch.
(1) Driver supports DMA transfer only when Intel Triton and Triton2 PCI Chip
Set.
(2) When application buffer address (store CD/DVD-ROM data) is not word
align, the driver will not DMA trnasfer. (Use PIO transfer)
(3) When doing DMA transfer with Intel Triton2 PCI chip set, use EMM386.EXE
version is more than 4.49.
(EMM386.EXE Version4.49 should be in MS-DOS 6.22.)
(4) When DMA transfering, load EMM386.EXE before this device driver is
loaded into system.

2. Port and IRQ used by this driver often can not run successfully when
conflicting with the drives (and drivers) of other companies.

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo 3xxx Series

Model

Clevo 3400

Description

Suspend To Disk Utility

Operating System

MS-DOS

Size Driver

56KB

File Name

phdisk.exe

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo 3xxx Series

Model

Clevo 3400

Description

Audio Drivers

Operating System

Windows 2000

Size Driver

3.3MB

File Name

v4.10.2225.zip

Observations

Readme for YAMAHA DS-XG Driver
1. Choosing an appropriate INF file
Please choose an appropriate INF file according to your system configuration.
Description of the INF files under ¥Inf directory is as follows:
(1) For DS-1S (YMF744B) device
Nlds1s0.inf
-> For a generic system.
Nlds1s0w.inf
-> For WHQL submission of a generic system.
(2) For DS-1E (YMF754) device
Nlds1e0.inf
-> For a generic system.
Nlds1e0w.inf
-> For WHQL submission of a generic system.
If you need further customization for your system, please contact your rep or your contact at Yamaha.
2. For Docking Systems
For Docking systems that utilizes a dummy device to control the 2ndary CODEC, please copy the files
under ¥Docker directory into the directory where other driver files reside.

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo 3xxx Series

Model

Clevo 3400

Description

Touch Pad Drivers

Operating System

Windows 2000

Version

5.0.57

Size Driver

1.3MB

File Name

32tp2k.zip

Observations

Synaptics Touchpad Driver for Windows 2000
Installation Notes
Version 5.0.57

1. Installing the Synaptics TouchPad Driver
-------------------------------------------

This driver requires Windows 2000.

NOTE REGARDING SAVING OF SETTINGS:
----------------------------------
Windows 2000 does not save any of the user settings for users belonging
to the "Guests" user group. This includes special TouchPad settings as
well as all other user settings. If you want your settings to be saved,
make sure your user account does not belong to the "Guests" group
using the User Manager program (you must be Administrator to change
user settings).

NOTE REGARDING MULTIPROCESSOR MACHINES:
---------------------------------------
Though we believe it should work, this driver has not been tested on
any multiprocessor machines.

Installation procedure
-------------------------------------------------------
First, if you have a new TouchPad, plug it in and reboot Windows 2000.
Windows 2000 will then detect your new TouchPad and install a standard
mouse driver to handle it. You cannot install the Synaptics TouchPad
driver until this process is complete and your TouchPad is functioning
as a normal pointing device.

Log on to your system as "Administrator", or as another user with
administrator privileges.

Run "Setup.exe". This program will automatically install the Synaptics
TouchPad driver to handle all PS/2 and Serial pointing devices
attached to your computer.

You will need to restart Windows after the installation is complete.
If the driver has been installed correctly, after you have restarted
Windows you should see the TouchPad Icon in your task bar next to the
clock. Also, a dialog box entitled "Information about your TouchPad"
will pop up. You can prevent this dialog box from coming up in the
future by checking the "Stop showing me this message" checkbox.

For help using your TouchPad, choose "Tell me more..." from the
"Information about your TouchPad" dialog box, or double-click on the
TouchPad Icon in your task bar, and click on the "Help" button.

If you wish to change one or more of your pointing devices to using
a standard Microsoft or other third party driver, you should bring
up the Mouse control panel, and select the "Hardware" tab. From there,
select the pointing device you want to change and click "Properties".
Select the "Driver" tab and Click "Update Driver...". Follow the
instructions to install a new driver.

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo 3xxx Series

Model

Clevo 3400

Description

Video Drivers

Operating System

Windows 2000

Size Driver

2.6MB

File Name

w2kb61.zip

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo 3xxx Series

Model

Clevo 3400

Description

Internal modem

Operating System

Windows 2000

Version

2.12.10A.5

Size Driver

1.1MB

File Name

32mdm2k.zip

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo 3xxx Series

Model

Clevo 3400

Description

FIR Drivers

Operating System

Windows 95

Version

1.2

Size Driver

41KB

File Name

32ir.zip

Observations

This diskette contains two files that implement the SMC driver
for Infrared communication as described by IrDA, two INF scripts for
installing the drivers in the Windows 95 system and a Microsoft Word
document that describes this software.

SmcSer.Vxd -- port driver for SMC IrCC
SmcSer.Inf -- installer for the port driver
SmcIrlap.Vxd -- Infrared Framer for fast speed SMC IrCC
SmcIrlap.Inf -- installer for the framer
SmcIrlap.Reg -- registry file used from SmcIrlap.Inf
Relnotes.Doc -- Release note

Readme.Txt -- this file

Refer to Relnotes.Doc for the information about the driver installation and
configuration of the resources.

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo 3xxx Series

Model

Clevo 3400

Description

82371XB update .inf utility

Operating System

Windows 95

Size Driver

570KB

File Name

32intel.zip

Observations

Windows* 95 INF Update Utility for Intel(r) Chipsets
Installation, Usage, and Release Note Information

Revision: 3.3.0.2 Production Release
Date: June 19, 1998

NOTE:
This document refers to desktop systems with
the following Intel chipsets:
430HX, 430VX, 430TX, 440FX, 440LX,
440EX, 440BX and 440GX.

Also, the term "processor" refers to the Intel(r) Pentium(r)
processor, Pentium(r) processor with MMX(tm) Technology,
Pentium(r) Pro processor, Pentium(r) II processor,
Celeron(tm) processor, and Pentium(r) II Xeon(tm) processor
devices ONLY.

This document contains the following sections:

1. System Requirements
2. Contents of the Distribution Package
3. INF Files updated by the Software
4. Running the Software
5. Verifying INF Update by the Software
6. Troubleshooting
7. Release Notes

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo 3xxx Series

Model

Clevo 3400

Description

PCMCIA Drivers Ricoh 5C475A

Operating System

Windows 95

Size Driver

558KB

File Name

32pcm.zip

Observations

RICOH CardBus Controllers for Windows95* OSR2.x
Installation, Usage, and Release Note Information

NOTE:
This document refers to desktop/notebook systems with
the following RICOH CardBus Controller devices:

RL5C476 (Dual Slot)
RC/RL/RT5C475 (Single Slot)
RL/RB5C478 (Dual Slot)
RL5C466 (Dual Slot)
RL5C465 (Single Slot)
This document contains the following sections:

1. System Requirements
2. Contents of the Distribution Package
3. Installing the Software
4. Verifying Installation of the Software
5. Release Notes
5A. Revision History

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo 3xxx Series

Model

Clevo 3400

Description

Touch Pad Drivers (new! Solve KB typing issue.)

Operating System

Windows 95-98

Version

5.0.28

Size Driver

1.3MB

File Name

32tp98.zip

Observations

Synaptics Touchpad Driver Installation Notes
Version 5.0.28

Contents
--------
1. Installing the Synaptics TouchPad Driver.
2. Personal Computer and Windows 95 Configuration Issues.
3. Other potential conflicts with the TouchPad Driver.

1. Installing the Synaptics TouchPad Driver
-------------------------------------------

First, make sure that your Synaptics TouchPad is connected
to your system (a driver will be installed for each currently
connected TouchPad).

If you have received your driver distribution in the form of a
self-extracting archive, then you must first extract the installation
files from the archive. Execute the self-extracting archive file
by double-clicking on it from Explorer, running it from the Start/Run
dialog, or running it from a DOS box command prompt.

Next, run the Setup.exe program, which automatically installs the
driver on your computer. You can run this program either from a DOS box
by going to the directory that contains the driver files and typing "setup",
or using Start/Run and running setup (e.g. if the driver files are on a
floppy disk in the A: drive, you would type "A:\setup"), or by exploring
the directory containing the driver files and double clicking on the
Setup.exe program.

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo 3xxx Series

Model

Clevo 3400

Description

BaySwap Drivers

Operating System

Windows 95-98

Version

1.1.2.6

Size Driver

1.3MB

File Name

32bay.zip

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo 3xxx Series

Model

Clevo 3400

Description

Modem Drivers

Operating System

Windows 98

Size Driver

1.5MB

File Name

32mod98.zip

Observations

SoftK56-PCI Modem
Product Release Notes
(Modem Driver v2.07)
Table of Contents
1 OVERVIEW 3
1.1 Generic Documents 3
1.2 Current Software 3
1.3 SoftK56 Chipsets 3
1.3.1 New Chipsets 3
1.3.2 Previous Version Chipsets 4
1.4 EEProm Image and Device IDs 4
1.5 Reference Designs 5
1.5.1 New Reference Designs 5
1.5.2 Earlier Reference Designs 6
2 DETAILS OF PRODUCT RELEASE 6
2.1 Driver Installation 6
2.2 Software Features and Modes of Operation 7
2.2.1 Minimum System Requirements and CPU Utilization 7
2.2.2 Current Features 7
2.2.3 Features Not Supported 7
2.2.4 Deviations Fixed in Release 2.05 7
2.2.5 Current Deviations of Release 2.05 8
2.2.6 Notes 8
2.2.7 Country Support 8

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo 3xxx Series

Model

Clevo 3400

Description

Video Drivers

Operating System

Windows 98

Size Driver

6.5MB

File Name

32vga98.zip

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo 3xxx Series

Model

Clevo 3400

Description

Audio Drivers

Operating System

Windows 98

Size Driver

3.7MB

File Name

32au98.zip

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo 3xxx Series

Model

Clevo 3400

Description

Audio Drivers (replicator)

Operating System

Windows 98

Version

4.06.2012

Size Driver

4.3MB

File Name

32aw98.zip

Observations

Readme for YAMAHA DS-XG Driver
1. Choosing an appropriate INF file
Please choose an appropriate INF file according to your system configuration.
Description of the INF files under ¥Inf directory is as follows:
(1) For DS-1S (YMF744B) device
¥Ds-1s¥Generic 4ch¥Ydsxg10.inf
-> For Generic 4ch system using two AC97 CODECs.
¥Ds-1s¥STAC9708_1¥Ydsxg10.inf
-> For STAC9708 4ch system which has separate Jack for Rear
output.
¥Ds-1s¥STAC9708_2¥Ydsxg10.inf
-> For STAC9708 4ch system which uses GPIO2 to switch between
Line in/Rear output.
¥Ds-1s¥WM704Q¥Ydsxg10.inf
-> For WM9704Q 4ch system which uses GPIO2 to switch between
Line in/Rear output.
¥Ds-1s¥Generic Dock¥Ydsxg10.inf
-> For Generic Docking system which utilizes a dummy device to control the 2ndary CODEC.
¥Ds-1s¥Docken¥Ydsxg10.inf
-> For Generic Docking system which utilizes DOCKEN# signal to control the 2ndary CODEC.

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo 3xxx Series

Model

Clevo 3400

Description

Modem Drivers

Operating System

Windows NT4

Size Driver

1.8MB

File Name

32modnt4.zip

Observations

SoftK56-PCI Modem
Product Release Notes
(Modem Driver v2.07)
Table of Contents
1 OVERVIEW 3
1.1 Generic Documents 3
1.2 Current Software 3
1.3 SoftK56 Chipsets 3
1.3.1 New Chipsets 3
1.3.2 Previous Version Chipsets 4
1.4 EEProm Image and Device IDs 4
1.5 Reference Designs 5
1.5.1 New Reference Designs 5
1.5.2 Earlier Reference Designs 6
2 DETAILS OF PRODUCT RELEASE 6
2.1 Driver Installation 6
2.2 Software Features and Modes of Operation 7
2.2.1 Minimum System Requirements and CPU Utilization 7
2.2.2 Current Features 7
2.2.3 Features Not Supported 7
2.2.4 Deviations Fixed in Release 2.05 7
2.2.5 Current Deviations of Release 2.05 8
2.2.6 Notes 8
2.2.7 Country Support 8

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo 3xxx Series

Model

Clevo 3400

Description

Audio Drivers

Operating System

Windows NT4

Size Driver

2.9MB

File Name

32aunt4.zip

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo 3xxx Series

Model

Clevo 3400

Description

Touch Pad Drivers

Operating System

Windows NT4

Size Driver

1.4MB

File Name

32tpnt4.zip

Observations

Synaptics Touchpad Driver for Windows NT
Installation Notes
Version 5.0.28

1. Installing the Synaptics TouchPad Driver
-------------------------------------------

NOTE REGARDING NT SERVICE PACKS:
--------------------------------
This driver requires Windows NT 4.0 with Service Pack 2 or greater
installed. At the time this document was written, the latest
Service Pack was available from Microsoft at:

http://www.microsoft.com/windows/NTW/info/ntupdates.htm

NOTE REGARDING SAVING OF SETTINGS:
----------------------------------
Windows NT does not save any of the user settings for users belonging
to the "Guests" user group. This includes special TouchPad settings as
well as all other user settings. If you want your settings to be saved,
make sure your user account does not belong to the "Guests" group
using the User Manager program (you must be Administrator to change
user settings).
NOTE REGARDING KEYBOARD DRIVERS:
--------------------------------
This installation procedure will install a keyboard driver that is
compatible with the Synaptics TouchPad driver. This keyboard driver
is nearly identical to the standard Microsoft Driver, and should
work interchangably with it. However, if you use a third party
non-standard keyboard driver, the installation procedure may disable
it. Reinstalling the non-standard driver will likely fix this
problem and not cause any serious problems unless you are running on
a multi-processor machine.

NOTE REGARDING THE MICROSOFT INTELLIMOUSE:
------------------------------------------
The Synaptics TouchPad driver is not currently compatible with the
Microsoft Intellimouse. If you have an Intellimouse, you can get it
to work again by following the instructions below for changing
back to the standard Microsoft driver.

NOTE REGARDING MULTIPROCESSOR MACHINES:
---------------------------------------
Though we believe it should work, this driver has not been tested on
any multiprocessor machines.

Installation procedure (with Service Pack 2 installed):
-------------------------------------------------------
First, if you have a new TouchPad, plug it in and reboot Windows NT.
Windows NT will then detect your new TouchPad and install a standard
mouse driver to handle it. You cannot install the Synaptics TouchPad
driver until this process is complete and your TouchPad is functioning
as a normal pointing device.

Log on to your NT system as "Administrator", or as another user with
administrator privileges.

Run "Setup.exe". This program will automatically install the Synaptics
TouchPad driver to handle all PS/2 and Serial pointing devices
attached to your computer.

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo 3xxx Series

Model

Clevo 3400

Description

Audio Drivers (replicator)

Operating System

Windows NT4

Version

4.00.1234

Size Driver

5.4MB

File Name

32ant4.zip

Observations

Readme for YAMAHA DS-XG NT4.0 Driver Installer
1. Choosing an appropriate CST file
Because this driver has various functions depending on the device you use,
you may need a customization on the driver.
Depending on your system configuration, please replace ydsxg.cst with the
one in an appropriate directory under ¥Custtool.
(1) For DS-1S (YMF744B) device
¥Ds-1s¥2ch
-> For Generic 2ch system
¥Ds-1s¥Generic 4ch
-> For Generic 4ch system using two AC97 CODECs.
¥Ds-1s¥STAC9708_1
-> For STAC9708 4ch system which has separate Jack for Rear
output.
¥Ds-1s¥STAC9708_2
-> For STAC9708 4ch system which uses GPIO2 to switch between
Line in/Rear output.
¥Ds-1s¥WM9704Q
-> For WM9704Q 4ch system which uses GPIO2 to switch between
Line in/Rear output.
¥Ds-1s¥Generic Dock
-> For Generic Docking system which utilizes a dummy device to control the 2ndary CODEC.
¥Ds-1s¥Docken
-> For Generic Docking system which utilizes DOCKEN# signal to control the 2ndary CODEC.