Available 25 files for Chem Usa ChemBook 8400
Select Files
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 8400
Description
Audio-L8B -Aureal 8810 Audio/Modem driver
Size Driver
7.6MB
File Name
8400_audl8b_player.zip
Observations
Vortex audio player application
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 8400
Description
CD-ROM
Size Driver
1.2MB
File Name
8400_cdrom.zip
Observations
ATAPI CD-ROM driver- For TOSHIBA ,MKE,TEAC How to install the device driver under DOS environment *****
To operate TEAC CD-ROM,the device driver (TEAC_CDI.SYS) has to be installed
from INSTALLATION DISK came along with CD-ROM.
Please follow the instruction below.
1. Boot up the system and insert the INSTALLATION DISK into your floppy
disk drive.
2. At the DOS prompt,type "A:\INSTALL" then press enter. (If your floppy
disk drive is "A:")
3. Installation program will now start.Please follow the instructions on the
screen to complete the installation procedure.
4. When finish,remove the INSTALLATION DISK from the floppy disk drive then
REBOOT your system.
During system reboot,check for the following message to assure that
the driver was loaded properly.
MSCDEX Version 2.23
Copyright (C) Microsoft Corp. 1986-1993. All rights reserved.
Drive X: = Driver TEAC-CDI unit 0
* 'X:' ... Drive letter assigned to CD-ROM Drive
This message means that TEAC CD-ROM drive is now activated.
* Now the installation of TEAC CD-ROM drive is completed.
***** TEAC CD-ROM DRIVE Trouble Shooting Tips *****
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 8400
Description
Drivers File List
Size Driver
3KB
File Name
8400_filelist.txt
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 8400
Description
Battery
Operating System
MS-DOS
Size Driver
15KB
File Name
8400_battery.zip
Observations
Utility For quickly fresh battery under
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 8400
Description
Touch Pad - TouchPad drivers (support wheel function)
Operating System
Win 2000
Size Driver
14.3MB
File Name
8400_thpw2k.zip
Observations
Installing the Synaptics TouchPad Driver
-------------------------------------------
This driver requires Windows 2000.
NOTE REGARDING SAVING OF SETTINGS:
----------------------------------
Windows 2000 does not save any of the user settings for users belonging
to the "Guests" user group. This includes special TouchPad settings as
well as all other user settings. If you want your settings to be saved,
make sure your user account does not belong to the "Guests" group
using the User Manager program (you must be Administrator to change
user settings).
NOTE REGARDING MULTIPROCESSOR MACHINES:
---------------------------------------
Though we believe it should work, this driver has not been tested on
any multiprocessor machines.
Installation procedure
-------------------------------------------------------
First, if you have a new TouchPad, plug it in and reboot Windows 2000.
Windows 2000 will then detect your new TouchPad and install a standard
mouse driver to handle it. You cannot install the Synaptics TouchPad
driver until this process is complete and your TouchPad is functioning
as a normal pointing device.
Log on to your system as "Administrator", or as another user with
administrator privileges.
Run "Setup.exe". This program will automatically install the Synaptics
TouchPad driver to handle all PS/2 and Serial pointing devices
attached to your computer.
You will need to restart Windows after the installation is complete.
If the driver has been installed correctly, after you have restarted
Windows you should see the TouchPad Icon in your task bar next to the
clock. Also, a dialog box entitled "Information about your TouchPad"
will pop up. You can prevent this dialog box from coming up in the
future by checking the "Stop showing me this message" checkbox.
For help using your TouchPad, choose "Tell me more..." from the
"Information about your TouchPad" dialog box, or double-click on the
TouchPad Icon in your task bar, and click on the "Help" button.
If you wish to change one or more of your pointing devices to using
a standard Microsoft or other third party driver, you should bring
up the Mouse control panel, and select the "Hardware" tab. From there,
select the pointing device you want to change and click "Properties".
Select the "Driver" tab and Click "Update Driver...". Follow the
instructions to install a new driver.
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 8400
Description
Audio--L8CK -ESS Allegro Audio/Modem Driver
Operating System
Win98
Size Driver
6.5MB
File Name
8400_audl8ck_w98.zip
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 8400
Description
Audio--L8CK -ESS Allegro Audio/Modem Driver
Operating System
Win98 Se
Size Driver
6.5MB
File Name
8400_audl8ck_wse.zip
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 8400
Description
Audio--L8CK -ESS Allegro Audio/Modem Driver
Operating System
Windows 2000
Size Driver
2.3MB
File Name
8400_audl8ck_w2k.zip
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 8400
Description
Video
Operating System
Windows 2000
Size Driver
853KB
File Name
8400_vgaw2k.zip
Observations
S3 Savage/MX VGA Driver Driver Installation Procedure for Win2K
Fresh installation:
1. When booting from VGA mode, the OS will automatically "find new hardware".
2. In the "Welcome to the Found New Hardware Wizard" page, click "next".
3. In the "Install Hardware Device Drivers" page, check" Search for
a suitable driver..." which is the default setting, then click "next".
4. In the "Locate Drivers Files" page, check the location from which you want to
install the driver, floppy, CD-ROM, or Specify a location. If you choose
"specify a location", then you should type in the path in the next page
and click "OK".
5. In the "Drivers Files Search Results" page, Windows2000 should locate
the driver you specified, and will display the path in the window. Just
click"Next".
6. In the next page which asks whether you want to install the driver,
just click "yes".
7. The driver will be installed. A final window will be displayed:"Completing
the Found New Hardware Wizard." At this window, just select "Finish".
8. The driver should now be installed. You can right click your mouse,
selecting "Properties". In the "Display Properties" window, select "settings" and
choose the display settings you prefer.
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 8400
Description
Audio-L8B -Aureal 8810 Audio/Modem driver
Operating System
Windows 2000
Size Driver
11.6MB
File Name
8400_audl8b_w2k.zip
Observations
Aureal Win2000 WDM audio and modem Install Procedure
====================================================
1) This Win2K build (any latest win2K build for that matter) comes with an installed
Aureal vortex WDM driver. For proper operation, you need to uninstall the existing
WDM driver from the O/S and install the update.
Uninstall:
2) Go to the Settings->Control panel->system.
Go to the system->Device manager. Uninstall the Multifunction adapters.
-> "Vortex Multifunction PCI Parent".
From the c:\winnt\inf directory, delete the following files.
'wdma_aur.inf'
'wdma_aur.pnf',
'Adm_mult.inf'
'Adm_mult.pnf'
'Adm_port.inf' ,
'Adm_port.pnf'.
Go to the c:\winnt\driver cache\i386. Rename the 'driver.cab' file to something like
'driver.cat' (so that your Adm88xx.sys file doesn't keep getting installed by the OS)
NOTE : If you rename this file,some system files will not be found automatic.
You can find some system files such as "I8042PRT.SYS" from "C:\WINNT\SYSTEM32\Drivers"
From the Folder options select 'show all hidden folders'. Then 'dllcache' folder
appears under C:\winnt\system32.
From the 'dllcache' delete the 'Adm88xx.sys' 'Admjoy.sys' files.
Now go to the c:\winnt\system32\drivers. Delete the respective 'Adm88xx.sys' 'Admjoy.sys' files.
While "Windows File Protection" windows appear, please click on [Cancel] button, then
click on [Yes] button to make sure remove driver.
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 8400
Description
Touch Pad - TouchPad drivers (support wheel function)
Operating System
Windows 95-98
Size Driver
19.8MB
File Name
8400_thpw9x.zip
Observations
Contents
--------
1. Installing the Synaptics TouchPad Driver.
2. Personal Computer and Windows 95 Configuration Issues.
3. Other potential conflicts with the TouchPad Driver.
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 8400
Description
Hot Key
Operating System
Windows 95-98-Me-2000
Size Driver
2.8MB
File Name
8400_hotkey.zip
Observations
Hotkey utility For L8K Series only How to install HotKey Driver in Windows 2000
=============================================
Install:
========
1. Double click [My Computer], double click [Control Panel],
double click [System].
2. Select [Hardware] Tab, then click on [Device Manager] button.
3. Double click on [Keyboards], then double click on [Standard 101/102-Key or Microsoft
Natural PS/2 Keyboard].
4. Click on [Driver] Tab,then click on [Update Driver...] button.
5. Click on [Next>] button.
6. Please click on [Display a list of the known drivers for this device so that I can
choose a specific driver], then click on [Next>] button.
7. Click on [Have Disk...] for the driver allocation (\2Khotkey) and click on [OK] button.
8. Click on [ASUS filtered keyboard with Hotkey function] and click on [Next>] button.
9. Click on [Yes] to continue installing new driver.
10. Click on [Next>] for Start Device Driver Installation.
11. Click on [Yes] for continue the installation.
12. Click on [Finish]
13. Click on [Close] and restart system to finish driver installation.
Uninstall:
==========
1. Double click [My Computer], double click [Control Panel],
double click [System].
2. Select [Hardware] Tab, then click on [Device Manager] button.
3. Double click on [Keyboards], then double click on [ASUS filtered Keyboard with Hotkey function].
4. Click on [Driver] Tab and click on [Uninstall] button.
5. Click on [Yes] button to confirm drvice removal.
6. Click on [Yes] button to restart your computer.
7. restart your system again to finish default keyboard driver installed.
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 8400
Description
Lan
Operating System
Windows 95-98-Me-2000-NT4
Size Driver
1.2MB
File Name
8400_speedstp.zip
Observations
Intel SpeedStep Utility
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 8400
Description
Lan
Operating System
Windows 95-98-Me-2000-NT4
Size Driver
538KB
File Name
8400_lan.zip
Observations
Installing LAN driver procedure on Microsoft Windows NT4.0 :
-------------------------------------------------------------
After putting the adapter in the computer, you need to configure it
under Windows NT40.
1 Double-click the Network icon in the Control Panel.
2. Click on "Yes" when Network Configuration windows appeared.
3. Click on "Next"
4. Click on "Select from list..."
5. Click on "Have Disk"
6. Please key-in "D:\LAN\NT40" (D is your CDROM drive)
7. Click "OK" when system Select OEM Option "Realtek RTL8139(A/B/C/8130)
PCI Fast Ethernet Adapter".
8. Click on "Next".
9. Click on Network protocol you need to install before you Click "Next" button.
10. Click "Next" twice.
11. System will copy some files from your source NT CDROM, please Key-in the correct path.
12. The screen will show Duplex mode windows by RTL8139.SYS driver.
The default value is "auto" so that the RTL8139 PCI Fast Ethernet adapter
and its driver RTL8139.SYS will auto-detect the line speed, 10 Mb or 100Mb,
while the RTL8139.SYS is loading. The other values, "10" or "100", are only
used when you want to forced RTL8139 PCI Fast Ethernet adapter to 10Mb or
100Mb. please click on "Continue" to contine setup.
13. Click on "Next" Twice.
14. NT will then perform the binding process. If any additional network
software options were installed, you may be prompted for specific
information for these packages.
15. Click on "Finish" and click on "Yes" to restart system and finish setting.
How to install Realtek LAN driver in Windows 98 Second Edition
==============================================================
1. Insert the "Driver and Utility" CD to CDROM/DVDROM device.
2. Double click [My Computer], double click [Control Panel],
double click [System].
3. Click on [Device Manager] tab.
4. Click on [Refresh] button.
5. System will find new hardware "Realtek RTL 8139(A/B/C/8130) PCI Fast Ether NIC" or "PCI Ethernet Controller"
It depends on does OS can reconize this hardware.
6. Click on [Next] twice.
7. Please select "Specify a location:" only, and click [Browse...] to select CDROM drive:(example D:)\LAN\WIN98
, then click [OK] to confirm driver location
8. Click [Next] three times to start LAN driver install
9. If system request LAN Driver location, it locate in CDROM drive:\LAN\WIN98
10. if system request you insert "Windows 98 Second Edition CD-ROM", click [OK] and select the Windows 98
Second Edition source to "c:\windows\options\cabs" for Reovery CD user. (or you need to insert "Windows 98
Second Edition" CD to CDROM device, and select source to CDROM drive)
11. Click [OK] to start copy driver from Windows 98 Second Edition source.
12. Click [Finish] button, and restart system to finish LAN driver install.
How to install Realtek LAN driver in Windows Millennium Edition :
=================================================================
1. Insert the "Driver and Utility" CD to CDROM/DVDROM device.
2. Double click [My Computer], double click [Control Panel],
double click [System].
3. Click on [Device Manager] tab.
4. Click on [Refresh] button.
5. System will find new hardware "Realtek RTL 8139(A) PCI Fast Ethernet NIC"
6. Click on [Next] .
7. Please locate "RTL8139.sys", and click [Browse...] to select CDROM drive:(example D:)\LAN\WINME
, then click [OK] twice to confirm driver location
8. If system request LAN Driver location, it locate in CDROM drive:\LAN\WINME
9. if system request you insert "Windows Millennium Edition CD-ROM", click [OK] and select the Windows
Millennium Edition source to "c:\windows\options\cabs" for Reovery CD user. (or you need to insert "Windows
Millennium Edition" CD to CDROM device, and select source to CDROM drive)
10. Click [OK] to start copy driver from Windows Millennium Edition source.
11. Click [Finish] button to finish LAN "Realtek RTL 8139(A/B/C/8130) PCI Fast Ethernet NIC" driver install.
12. Restart system to finish LAN driver install.
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 8400
Description
BIOS Updates
Operating System
Windows 98
Version
115
Size Driver
303KB
File Name
8400b_115a.exe
Observations
BIOS Flashing Steps
==========
1: Make a DOS boot diskette without autoexec.bat and config.sys files.
Copy the PHLASH.EXE, PLATFORM.BIN, and unzipped BIOS
image(ex.0404.ROM) files to this diskette.
2: Turn the system off, then boot the system using the boot diskette
you just created. Then type
PHLASH/MODE=3 0404.ROM(say if you wanna to update to rev. 0404)
and press [ENTER].
3: It will now update the flash BIOS. If flash memory has been
successfully programmed, it will ask you to press any key to power off
the system. If the system does not off, turn the power off then on.
4: Assuming that you have successfully flashed the BIOS. After the system
reboots, hit [F2] to enter the CMOS Setup. At this point, go to
"Load Setup Defaults" field at "Exit" sub-menu. Then save and exit Setup.
If screen resolution has shrunk after you restart, please reset your
display resolution to 1024*768 and color to 16 bit.
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 8400
Description
Audio-L8B -Aureal 8810 Audio/Modem driver
Operating System
Windows 98-98Se
Size Driver
38.6MB
File Name
8400_audl8b_w9x.zip
Observations
How to install Aureal audio driver in Windows 9X OS
===================================================
1. Insert the "Driver and Utility" CD to CDROM/DVDROM device.
2. Double click [My Computer], double click [Control Panel],
double click [System].
3. Click on [Device Manager] tab.
4. Click on [Refresh] button.
5. System will find new hardware "PCI Multimedia Audio Device", Click on [Next] twice.
6. Please select "Specify a location:" only, and click [Browse...] to select
CDROM drive:(example D:)\Audio\L8B\Win9x\Driver, then click [OK] to confirm driver location
7. Click [Next] twice times to start Audio driver install
8. Click [Finish] to finish "Vortex Au8810 Multifunction PCI Platform" installation.
9. System will continue install other multimedia function.
10. if system request you insert "Windows 9X CD-ROM", click [OK] and select the Windows 9X
source to "c:\windows\options\cabs" for Reovery CD user. (or you need to insert "Windows 9X"
CD to CDROM device, and select source to CDROM drive)
11. if system request you the file "au10*.cat", it locate in Driver CD:\Audio\L8B\Win9x\Driver.
12. Restart system to finish installation.
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 8400
Description
Video
Operating System
Windows 98-98Se-Me
Size Driver
1.2MB
File Name
8400_vgaw9x.zip
Observations
S3 Savage/MX VGA Driver
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 8400
Description
FIR
Operating System
Windows 98-Me-2000
Size Driver
601KB
File Name
8400_fir.zip
Observations
Fast IR driver How to set FIR device in Windows Millennium Edition
===================================================
1. Double click on "My Computer", double click on "Control Panel" and
double click on "Network"
2. Double click on "IrDA Fast Infrared Port", click on "Advanced" Tab and choice
"IBM 31T1100" for "Infrared Transceiver A".
3. Click "OK" twice to restart your computer and finished setting.
How to set FIR device in Windows 2000
=====================================
1. Double click on "My Computer", double click on "Control Panel" and
double click on "System".
2. Click on "Hardware" Tab.
3. Click on "Device Manager"
4. Double click on "Infrared devices", and double click on "IrDA Fast Infrared Port".
5. Click on "Advanced" Tab after IrDA Fast Infrared Port Properties windows appeared.
6. In Value:, Choice "IBM 31T1100" for "Infrared Transceiver A".
7. Click "OK" and finished setting.
How to set FIR device in Windows 98
===================================
1. Double click on "My Computer", double click on "Control Panel" and
double click on "Network"
2. Double click on "IrDA v3.0 Fast Infrared Port", click on "Advanced" Tab and choice
"IBM 31T1100" for "Infrared Transceiver A".
3. Click "OK" twice to restart your computer and finished setting.
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 8400
Description
Audio-L8B -Aureal 8810 Audio/Modem driver
Operating System
Windows Me
Size Driver
38.6MB
File Name
8400_audl8b_wme.zip
Observations
How to install Aureal audio driver in Windows Millennium Edition
================================================================
1. Insert the "Driver and Utility" CD to CDROM/DVDROM device.
2. Double click [My Computer], double click [Control Panel],
double click [System].
3. Click on [Device Manager] tab.
4. Click on [Refresh] button.
5. Click on "Next" .
6. Select "Votex AU8810 Multifunction PCI Platform" location :"CDROM Drive(D):\Audio\L8B\WINME\Driver\"
7. Click on "OK" button to start driver install.
8. Click on "Finish" to finish driver installation.
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 8400
Description
Touch Pad - TouchPad drivers (support wheel function)
Operating System
Windows Me
Size Driver
19.8MB
File Name
8400_thpwme.zip
Observations
Contents
--------
1. Installing the Synaptics TouchPad Driver.
2. Personal Computer and Windows 95 Configuration Issues.
3. Other potential conflicts with the TouchPad Driver.
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 8400
Description
Audio--L8CK -ESS Allegro Audio/Modem Driver
Operating System
Windows Me
Size Driver
2.2MB
File Name
8400_audl8ck_wme.zip
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 8400
Description
Audio--L8CK -ESS Allegro Audio/Modem Driver
Operating System
Windows NT4
Size Driver
1.7MB
File Name
8400_audl8ck_nt4.zip
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 8400
Description
Audio-L8B -Aureal 8810 Audio/Modem driver
Operating System
Windows NT4
Size Driver
11.4MB
File Name
8400_audl8b_nt4.zip
Observations
This is version 3.25.05 of the Aureal AU8810 NT 4.0 driver.
I. Overview
---------------------------
A. SYSTEM REQUIREMENTS:
1. Windows NT 4.0 PC with:
* Pentium 166MHz or faster CPU
* 32MB DRAM
* Available PCI slot.
* Windows NT installed.
* 15MB hard disk space in the Windows NT partition.
* CD-ROM drive.
2. Good-quality speakers or headphones and connecting cables.
3. Joystick and MIDI keyboard (optional).
B. WINDOWS NT 4.0 DRIVER ISSUES:
1. BIOS Settings - For proper operation, any BIOS support for
"Plug and Play OS" or "Windows 95 OS" must be disabled. The NT
drivers attempt to configure the audio card if the BIOS setting
is set correctly, but are not successful on all machine types.
2. Matrox Display Adapters - The Matrox drivers shipping with NT
4.0 are poorly behaved in the system and hog the PCI bus during
heavy graphics usage, which can cause noticable audio dropouts.
If using Matrox Millennium II driver v3.20, (4.0.55), try
upgrading to the latest Matrox drivers. Upgrading to the latest
driver will not guarantee any improvement. In this case, you
may want to contact Matrox directly to address this problem.
3. Number Nine Display Adapters - The Number Nine Imagine128
drivers shipping with NT4.0 are poorly behaved in the system
and hog the PCI bus during heavy graphics usage, which can
cause noticable audio dropouts.
4. Riva 128 Display Adapters - The Riva 128 drivers shipping
with NT4.0 are poorly behaved in the system and hog the PCI bus
during heavy graphics usage, which can cause noticable audio
dropouts. A new set of drivers for Riva128 display adapters
fixes the problem and is available from:
http://www.stb.com/drivers/velocity/vl128.html
5. 3COM network card drivers - Version 1.0 of the XL 3COM network
card driver found on the NT distribution CD can cause blue
screens during installations. Be sure to use 1.1 or above.
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 8400
Description
Touch Pad - TouchPad drivers (support wheel function)
Operating System
Windows NT4
Size Driver
16MB
File Name
8400_thpnt4.zip
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 8400
Description
Video
Operating System
Windows NT4
Size Driver
737KB
File Name
8400_vgant4.zip
Observations
S3 Savage/MX VGA Driver Installing your new S3 Video Driver for Windows NT 4.0.****
1. Start system with Windows NT 4.0 installed.
2. IMPORTANT: When the "Please select the operating system to start..." message
is displayed, select "Windows NT Workstation Version 4.00 [VGA mode]".
3. From "Start", select the "Settings group", then click on the
"Control Panel" icon.
4. In the "Control Panel", double click on the "Display" icon.
5. In the "Settings" screen, click on the "Display Type..." button.
6. From the "Display Type" screen, and in the "Adapter Type" section, click
on the "Change..." button.
7. In the "Change Display" screen, click on the "Have Disk..." button.
8. Insert the new display driver diskette into the CD:\VGA\NT40 drive, then click on
the "OK" button.
9. From the list of displayed S3 devices, select your S3 device.
10. From "Third-party Drivers", click on the "Yes" button to proceed.
11. If a message appears stating the driver is already installed on the
system, and asks if you want to use the current or new drivers, be sure
to select the "New" button.
12. If prompted for the driver diskette a second time, click on the
"Continue" button.
13. When the message "The drivers were successfully installed" is displayed,
remove the display driver diskette, then click on the "OK" button.
14. Back at the "Display Type" window, click on the "Close" button.
15. Back at the "Display Properties" window, click on the "Close" button.
16. When you see the "System Settings Change" window, asking if you wish to
restart your computer, click on the "Yes" window to reboot now.
NOTE: If installing Windows NT 4.00 with the S3 device currently installed
in the system:
Proceed through the Windows NT installation as normal. The installation
program will prompt the user to choose a display mode. Choose the
"Cancel" button from the "Display Settings" screen to ignore this step
for now. The installation will now finish. Once Windows NT has started
for the first time, proceed to follow the steps outlined above to install
the driver for your S3 device.
Access to Official Website Chem Usa
Welcome to the HelpDrivers, driver for printers.
Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more
You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.
Do not rename the file you're downloading, it may cause installation problems.