Chem Usa ChemBook 8200B Notebooks & Tablet PCs

Company

Chem Usa

Categories

Notebooks & Tablet PCs

Model

Chem Usa ChemBook 8200B

Description

CD ROM

Size Driver

1.2MB

File Name

8200_cdrom.zip

Observations

ATAPI CD-ROM driver How to install the device driver under DOS environment *****

To operate TEAC CD-ROM,the device driver (TEAC_CDI.SYS) has to be installed
from INSTALLATION DISK came along with CD-ROM.
Please follow the instruction below.

1. Boot up the system and insert the INSTALLATION DISK into your floppy
disk drive.

2. At the DOS prompt,type "A:\INSTALL" then press enter. (If your floppy
disk drive is "A:")

3. Installation program will now start.Please follow the instructions on the
screen to complete the installation procedure.

4. When finish,remove the INSTALLATION DISK from the floppy disk drive then
REBOOT your system.

During system reboot,check for the following message to assure that
the driver was loaded properly.

MSCDEX Version 2.23
Copyright (C) Microsoft Corp. 1986-1993. All rights reserved.

Drive X: = Driver TEAC-CDI unit 0

* 'X:' ... Drive letter assigned to CD-ROM Drive

This message means that TEAC CD-ROM drive is now activated.

* Now the installation of TEAC CD-ROM drive is completed.
***** TEAC CD-ROM DRIVE Trouble Shooting Tips *****

Company

Chem Usa

Categories

Notebooks & Tablet PCs

Model

Chem Usa ChemBook 8200B

Description

Flash

Version

V1.57.A02

Size Driver

34KB

File Name

8200_flash.zip

Observations

FLASH BIOS utility BIOS Flashing Steps
===========================================================================
1: Make a DOS boot diskette without autoexec.bat and config.sys files.
Copy the PHLASH.EXE, PLATFORM.BIN, and unzipped BIOS
image(ex.0404.ROM) files to this diskette.

2: Turn the system off, then boot the system using the boot diskette
you just created. Then type
PHLASH/MODE=3 0404.ROM(say if you wanna to update to rev. 0404)
and press [ENTER].

3: It will now update the flash BIOS. If flash memory has been
successfully programmed, it will ask you to press any key to power off
the system. If the system does not off, turn the power off then on.

4: Assuming that you have successfully flashed the BIOS. After the system
reboots, hit [F2] to enter the CMOS Setup. At this point, go to
"Load Setup Defaults" field at "Exit" sub-menu. Then save and exit Setup.
If screen resolution has shrunk after you restart, please reset your
display resolution to 1024*768 and color to 16 bit.

Company

Chem Usa

Categories

Notebooks & Tablet PCs

Model

Chem Usa ChemBook 8200B

Description

PCMCIA

Operating System

Windows 95

Version

V4.00.1111

Size Driver

558KB

File Name

8200_pcmcia.zip

Observations

This document describes the installation procedure and usage information
for the RICOH CardBus Controllers for Windows 95* OSR2.x. Also included
are release notes describing any problems or issues with the software which
were known at the time of shipment.

This document contains the following sections:

1. System Requirements
2. Contents of the Distribution Package
3. Installing the Software
4. Verifying Installation of the Software
5. Release Notes
5A. Revision History

Company

Chem Usa

Categories

Notebooks & Tablet PCs

Model

Chem Usa ChemBook 8200B

Description

TouchPad

Operating System

Windows 2000

Version

V5.0.56

Size Driver

1.3MB

File Name

8200_thpw2k.zip

Observations

Installing the Synaptics TouchPad Driver
-------------------------------------------

This driver requires Windows 2000.

NOTE REGARDING SAVING OF SETTINGS:
----------------------------------
Windows 2000 does not save any of the user settings for users belonging
to the "Guests" user group. This includes special TouchPad settings as
well as all other user settings. If you want your settings to be saved,
make sure your user account does not belong to the "Guests" group
using the User Manager program (you must be Administrator to change
user settings).

NOTE REGARDING MULTIPROCESSOR MACHINES:
---------------------------------------
Though we believe it should work, this driver has not been tested on
any multiprocessor machines.

Installation procedure
-------------------------------------------------------
First, if you have a new TouchPad, plug it in and reboot Windows 2000.
Windows 2000 will then detect your new TouchPad and install a standard
mouse driver to handle it. You cannot install the Synaptics TouchPad
driver until this process is complete and your TouchPad is functioning
as a normal pointing device.

Log on to your system as "Administrator", or as another user with
administrator privileges.

Run "Setup.exe". This program will automatically install the Synaptics
TouchPad driver to handle all PS/2 and Serial pointing devices
attached to your computer.

You will need to restart Windows after the installation is complete.
If the driver has been installed correctly, after you have restarted
Windows you should see the TouchPad Icon in your task bar next to the
clock. Also, a dialog box entitled "Information about your TouchPad"
will pop up. You can prevent this dialog box from coming up in the
future by checking the "Stop showing me this message" checkbox.

For help using your TouchPad, choose "Tell me more..." from the
"Information about your TouchPad" dialog box, or double-click on the
TouchPad Icon in your task bar, and click on the "Help" button.

If you wish to change one or more of your pointing devices to using
a standard Microsoft or other third party driver, you should bring
up the Mouse control panel, and select the "Hardware" tab. From there,
select the pointing device you want to change and click "Properties".
Select the "Driver" tab and Click "Update Driver...". Follow the
instructions to install a new driver.

Company

Chem Usa

Categories

Notebooks & Tablet PCs

Model

Chem Usa ChemBook 8200B

Description

Audio Drivers

Operating System

Windows 2000

Version

V5.00.2234

Size Driver

22KB

File Name

8200_audw2k.zip

Observations

How to install Audio driver in Windows 2000
===========================================

1. Insert the Notebook support CD.
2. Double click [My Computer], double click [Control Panel],
double click [System].
3. Select [Hardware] Tab, then click on [Device Manager].
4. Double click on [Multimedia Audio Controller].
5. Select [Driver] Tab, then click on [Update Driver].
6. Click on [Next>] twice.
7. Please only Choice [Specify a location] for Optional search locations:
,then click on [Next>]
8. Click on [Browse...] to locate the Audio driver from the support CD,
the path is: \Audio\Win2000, then click [Open].
9. Click on [OK] to confirm Install From Disk.
10. Click on [Next>] to confirm smwdm.inf for new driver.
11. Click on [Yes] to confirm Change driver to [SoundMAX Integrated Digital Audio].
12. Click on [Finish] to finish install.
13. Click on [Close], then click on [Yes] to restart your computer for audio driver to
take effect.

Company

Chem Usa

Categories

Notebooks & Tablet PCs

Model

Chem Usa ChemBook 8200B

Description

Patch

Operating System

Windows 95-98

Size Driver

1.3MB

File Name

8200_patch.zip

Observations

Intel 82440MX INF update utility This document contains the following sections:

1. Overview
2. Contents of the Distribution Package
3. System Requirements
4. Installing the Software
4A. Installing the Software in Interactive Mode
4B. Installing the Software in Silent Mode
5. Verifying Installation of the Software
6. Identifying the Software Version Number
7. Troubleshooting

Company

Chem Usa

Categories

Notebooks & Tablet PCs

Model

Chem Usa ChemBook 8200B

Description

Fast IR

Operating System

Windows 95-98-2000

Size Driver

556KB

File Name

8200_irda.zip

Observations

How to set FIR device in Windows 2000
=====================================

1. Double click on "My Computer", double click on "Control Panel" and
double click on "System".

2. Click on "Hardware" Tab.

3. Click on "Device Manager"

4. Double click on "Infrared devices", and double click on "IrDA Fast Infrared Port".

5. Click on "Advanced" Tab after IrDA Fast Infrared Port Properties windows appeared.

6. In Value:, Choice "IBM 31T1100" for "Infrared Transceiver A".

3. Click "OK" and finished setting.

Company

Chem Usa

Categories

Notebooks & Tablet PCs

Model

Chem Usa ChemBook 8200B

Description

PORTDOCK

Operating System

Windows 95-98-NT4

Version

parv2041

Size Driver

841KB

File Name

8200_portdock.zip

Observations

EPP TO IDE drivers Instructions on PCMCIA Hard Disk Drive Format Utility in
Windows 95 system

Features:

. Support Hard Disk drive up to 8GB
. Multiple partition capable
. LBA support, standard 16,32,64,128,256 heads translation

Two Step Installation:

1. Hook your disk drive to INT 13H and reboot system
2. Run CDISK utility

Step 1:

Click on , , ,
then .

Click on then .
Check on and click on OK, you will be asked to reboot the
system

Step 2:

After system boots up again, run CDISK in DOS window. Then follow the
instructions in the user's manual to continue the format/partition
procedure.

Company

Chem Usa

Categories

Notebooks & Tablet PCs

Model

Chem Usa ChemBook 8200B

Description

Lan

Operating System

Windows 95-98-NT4

Version

V3.03

Size Driver

1.1MB

File Name

8200_lan.zip

Observations

Intel 82559 PRO/100+ Client Adapter Driver Readme Files for Windows* NT*, NetWare*, Unix, and Other Operating
Systems.
===================================================================

For more information on installing drivers for Windows NT 4.0, NetWare,
and Unix, see the following files:

Microsoft Windows MS.TXT
Novell NetWare NETWARE.TXT
Unix UNIX.TXT
Other Operating Systems OTHER.TXT

Use any standard text editor or word processor to read, search, or print
the files. These files are also viewable with the DOS Text Viewer in
Setup. To use the viewer, type: SETUP /README at the DOS prompt.

Server Adapter Teaming Features
===============================

The PRO/100+ Server adapters support advanced teaming features:

Adapter Fault Tolerance (AFT)
Adaptive Load Balancing (ALB)
Fast EtherChannel* (FEC)

For more information on these teaming features and how to set up
teaming on specific adapters, see the file TEAMING.TXT in the
\INFO\GENERAL directory.

Making Floppy Disks for NetWare and Windows Installation
========================================================

If you need to use a floppy disk to install the PRO/100+ adapter
drivers, use the MAKENW.BAT or MAKEMS.BAT utilities located in the
\MAKEDISK directory on this CD-ROM.

Company

Chem Usa

Categories

Notebooks & Tablet PCs

Model

Chem Usa ChemBook 8200B

Description

Panel

Operating System

Windows 95-98-NT4-2000

Size Driver

8.6MB

File Name

8200_panel.zip

Observations

SMI Control Panel program To install the control panel for the first time, insert floppy named disk1 and run the
the SETUP.EXE.

To upgrate the control panel to a newer version, please close the existing SMI control
panel before proceed. Error will occur during the installation if fail to do so. For
best result, remove the old version of the control panel first before installing the new
control panel.

for SM910, rotation mode is not supported.

Company

Chem Usa

Categories

Notebooks & Tablet PCs

Model

Chem Usa ChemBook 8200B

Description

Video Drivers

Operating System

Windows 95-98-NT4-2000

Size Driver

1.1MB

File Name

8200_vga.zip

Observations

1. Insert the Notebook support CD.
2. Double click [My Computer], double click [Control Panel],
double click [Display].
3. Select [Settings], then click [Display Type].
4. Click [Change], then click [Have Disk].
5. Click [Browse] to locate the VGA driver from the support CD,
the path is: \VGA\M8AC\NT40, then click [Open].
6. Click [OK] to confirm Install From Disk.
7. Click [OK] to confirm Change Display.
8. Click [Yes] to confirm Third-party Drivers.
9. Click [OK] to exit the display property.
10. Click [Close] twice, then click [Yes] to reboot.

Access to Official Website Chem Usa

Sorry, Chem Usa Official Website has disappeared!

Welcome to the HelpDrivers, driver for printers.

Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more

You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.

Do not rename the file you're downloading, it may cause installation problems.

Available 24 files for Chem Usa ChemBook 8200B

Select Files