Available 24 files for Chem Usa ChemBook 8200
Select Files
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 8200
Description
Flash
Version
V1.57.A02
Size Driver
34KB
File Name
8200_flash.zip
Observations
FLASH BIOS utility BIOS Flashing Steps
===========================================================================
1: Make a DOS boot diskette without autoexec.bat and config.sys files.
Copy the PHLASH.EXE, PLATFORM.BIN, and unzipped BIOS
image(ex.0404.ROM) files to this diskette.
2: Turn the system off, then boot the system using the boot diskette
you just created. Then type
PHLASH/MODE=3 0404.ROM(say if you wanna to update to rev. 0404)
and press [ENTER].
3: It will now update the flash BIOS. If flash memory has been
successfully programmed, it will ask you to press any key to power off
the system. If the system does not off, turn the power off then on.
4: Assuming that you have successfully flashed the BIOS. After the system
reboots, hit [F2] to enter the CMOS Setup. At this point, go to
"Load Setup Defaults" field at "Exit" sub-menu. Then save and exit Setup.
If screen resolution has shrunk after you restart, please reset your
display resolution to 1024*768 and color to 16 bit.
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 8200
Description
PHDISK
Version
V4.36
Size Driver
30KB
File Name
8200_phdisk.zip
Observations
Utility to make the 'Suspend to disk' partition
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 8200
Description
TouchPad
Size Driver
744KB
File Name
8200_thpsketch.zip
Observations
Support wheel function
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 8200
Description
CD ROM
Size Driver
1.2MB
File Name
8200_cdrom.zip
Observations
ATAPI CD-ROM driver How to install the device driver under DOS environment *****
To operate TEAC CD-ROM,the device driver (TEAC_CDI.SYS) has to be installed
from INSTALLATION DISK came along with CD-ROM.
Please follow the instruction below.
1. Boot up the system and insert the INSTALLATION DISK into your floppy
disk drive.
2. At the DOS prompt,type "A:\INSTALL" then press enter. (If your floppy
disk drive is "A:")
3. Installation program will now start.Please follow the instructions on the
screen to complete the installation procedure.
4. When finish,remove the INSTALLATION DISK from the floppy disk drive then
REBOOT your system.
During system reboot,check for the following message to assure that
the driver was loaded properly.
MSCDEX Version 2.23
Copyright (C) Microsoft Corp. 1986-1993. All rights reserved.
Drive X: = Driver TEAC-CDI unit 0
* 'X:' ... Drive letter assigned to CD-ROM Drive
This message means that TEAC CD-ROM drive is now activated.
* Now the installation of TEAC CD-ROM drive is completed.
***** TEAC CD-ROM DRIVE Trouble Shooting Tips *****
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 8200
Description
BIOS Updates
Operating System
BIOS Updates
Version
108
Size Driver
267KB
File Name
82v0108.exe
Observations
Recommended Flash EPROM (BIOS) Management & Updating Procedures
===================================================
Upon first use of the computer system:
1. Create a bootable system floppy diskette by typing [FORMAT A:/S] from
the DOS prompt without creating "AUTOEXEC.BAT" and "CONFIG.SYS" files.
2. Copy the extracted files to your new diskette.
3. Set SW1-1 and SW1-2 to On under the keyboard.
4. At the "A:\" prompt, type: [1100M] or [fp /m=110m 11mr127.bin] and then the
WARNING: If the Flash Memory Writer utility was not able to successfully
download a complete BIOS file, your system may not be able to boot up.
If this happens, your system will need service from your vendor.
5. Turn off your computer after successfully flashing the new BIOS.
6. Turn on your computer and hold down the key to enter BIOS setup.
You must select "Setup Default" to affect the new BIOS, then you may
set other items from the Menu.
7. Be sure to enable Plug and Play OS support if you are running Windows 95.
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 8200
Description
Battery
Operating System
MS-DOS
Version
0.92LF
Size Driver
18KB
File Name
8200_battery.zip
Observations
Utility For quickly fresh battery under
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 8200
Description
PCMCIA
Operating System
Windows 95
Version
V4.00.1111
Size Driver
558KB
File Name
8200_pcmcia.zip
Observations
This document describes the installation procedure and usage information
for the RICOH CardBus Controllers for Windows 95* OSR2.x. Also included
are release notes describing any problems or issues with the software which
were known at the time of shipment.
This document contains the following sections:
1. System Requirements
2. Contents of the Distribution Package
3. Installing the Software
4. Verifying Installation of the Software
5. Release Notes
5A. Revision History
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 8200
Description
TouchPad
Operating System
Windows 2000
Version
V5.0.56
Size Driver
1.3MB
File Name
8200_thpw2k.zip
Observations
Installing the Synaptics TouchPad Driver
-------------------------------------------
This driver requires Windows 2000.
NOTE REGARDING SAVING OF SETTINGS:
----------------------------------
Windows 2000 does not save any of the user settings for users belonging
to the "Guests" user group. This includes special TouchPad settings as
well as all other user settings. If you want your settings to be saved,
make sure your user account does not belong to the "Guests" group
using the User Manager program (you must be Administrator to change
user settings).
NOTE REGARDING MULTIPROCESSOR MACHINES:
---------------------------------------
Though we believe it should work, this driver has not been tested on
any multiprocessor machines.
Installation procedure
-------------------------------------------------------
First, if you have a new TouchPad, plug it in and reboot Windows 2000.
Windows 2000 will then detect your new TouchPad and install a standard
mouse driver to handle it. You cannot install the Synaptics TouchPad
driver until this process is complete and your TouchPad is functioning
as a normal pointing device.
Log on to your system as "Administrator", or as another user with
administrator privileges.
Run "Setup.exe". This program will automatically install the Synaptics
TouchPad driver to handle all PS/2 and Serial pointing devices
attached to your computer.
You will need to restart Windows after the installation is complete.
If the driver has been installed correctly, after you have restarted
Windows you should see the TouchPad Icon in your task bar next to the
clock. Also, a dialog box entitled "Information about your TouchPad"
will pop up. You can prevent this dialog box from coming up in the
future by checking the "Stop showing me this message" checkbox.
For help using your TouchPad, choose "Tell me more..." from the
"Information about your TouchPad" dialog box, or double-click on the
TouchPad Icon in your task bar, and click on the "Help" button.
If you wish to change one or more of your pointing devices to using
a standard Microsoft or other third party driver, you should bring
up the Mouse control panel, and select the "Hardware" tab. From there,
select the pointing device you want to change and click "Properties".
Select the "Driver" tab and Click "Update Driver...". Follow the
instructions to install a new driver.
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 8200
Description
Audio Drivers
Operating System
Windows 2000
Version
V5.00.2234
Size Driver
22KB
File Name
8200_audw2k.zip
Observations
How to install Audio driver in Windows 2000
===========================================
1. Insert the Notebook support CD.
2. Double click [My Computer], double click [Control Panel],
double click [System].
3. Select [Hardware] Tab, then click on [Device Manager].
4. Double click on [Multimedia Audio Controller].
5. Select [Driver] Tab, then click on [Update Driver].
6. Click on [Next>] twice.
7. Please only Choice [Specify a location] for Optional search locations:
,then click on [Next>]
8. Click on [Browse...] to locate the Audio driver from the support CD,
the path is: \Audio\Win2000, then click [Open].
9. Click on [OK] to confirm Install From Disk.
10. Click on [Next>] to confirm smwdm.inf for new driver.
11. Click on [Yes] to confirm Change driver to [SoundMAX Integrated Digital Audio].
12. Click on [Finish] to finish install.
13. Click on [Close], then click on [Yes] to restart your computer for audio driver to
take effect.
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 8200
Description
Audio Drivers
Operating System
Windows 95
Version
V4.06.0538
Size Driver
5.5MB
File Name
8200_audw95.zip
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 8200
Description
TouchPad
Operating System
Windows 95-98
Version
V5.0.45
Size Driver
18.2MB
File Name
8200_thpw9x.zip
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 8200
Description
Patch
Operating System
Windows 95-98
Size Driver
1.3MB
File Name
8200_patch.zip
Observations
Intel 82440MX INF update utility This document contains the following sections:
1. Overview
2. Contents of the Distribution Package
3. System Requirements
4. Installing the Software
4A. Installing the Software in Interactive Mode
4B. Installing the Software in Silent Mode
5. Verifying Installation of the Software
6. Identifying the Software Version Number
7. Troubleshooting
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 8200
Description
VPM
Operating System
Windows 95-98
Version
V1.1
Size Driver
872KB
File Name
8200_vpm.zip
Observations
SMI VPM drivers and capture applications
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 8200
Description
Fast IR
Operating System
Windows 95-98-2000
Size Driver
556KB
File Name
8200_irda.zip
Observations
How to set FIR device in Windows 2000
=====================================
1. Double click on "My Computer", double click on "Control Panel" and
double click on "System".
2. Click on "Hardware" Tab.
3. Click on "Device Manager"
4. Double click on "Infrared devices", and double click on "IrDA Fast Infrared Port".
5. Click on "Advanced" Tab after IrDA Fast Infrared Port Properties windows appeared.
6. In Value:, Choice "IBM 31T1100" for "Infrared Transceiver A".
3. Click "OK" and finished setting.
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 8200
Description
PORTDOCK
Operating System
Windows 95-98-NT4
Version
parv2041
Size Driver
841KB
File Name
8200_portdock.zip
Observations
EPP TO IDE drivers Instructions on PCMCIA Hard Disk Drive Format Utility in
Windows 95 system
Features:
. Support Hard Disk drive up to 8GB
. Multiple partition capable
. LBA support, standard 16,32,64,128,256 heads translation
Two Step Installation:
1. Hook your disk drive to INT 13H and reboot system
2. Run CDISK utility
Step 1:
Click on
then
Click on
Check on
system
Step 2:
After system boots up again, run CDISK in DOS window. Then follow the
instructions in the user's manual to continue the format/partition
procedure.
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 8200
Description
Lan
Operating System
Windows 95-98-NT4
Version
V3.03
Size Driver
1.1MB
File Name
8200_lan.zip
Observations
Intel 82559 PRO/100+ Client Adapter Driver Readme Files for Windows* NT*, NetWare*, Unix, and Other Operating
Systems.
===================================================================
For more information on installing drivers for Windows NT 4.0, NetWare,
and Unix, see the following files:
Microsoft Windows MS.TXT
Novell NetWare NETWARE.TXT
Unix UNIX.TXT
Other Operating Systems OTHER.TXT
Use any standard text editor or word processor to read, search, or print
the files. These files are also viewable with the DOS Text Viewer in
Setup. To use the viewer, type: SETUP /README at the DOS prompt.
Server Adapter Teaming Features
===============================
The PRO/100+ Server adapters support advanced teaming features:
Adapter Fault Tolerance (AFT)
Adaptive Load Balancing (ALB)
Fast EtherChannel* (FEC)
For more information on these teaming features and how to set up
teaming on specific adapters, see the file TEAMING.TXT in the
\INFO\GENERAL directory.
Making Floppy Disks for NetWare and Windows Installation
========================================================
If you need to use a floppy disk to install the PRO/100+ adapter
drivers, use the MAKENW.BAT or MAKEMS.BAT utilities located in the
\MAKEDISK directory on this CD-ROM.
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 8200
Description
Modem
Operating System
Windows 95-98-NT4
Version
V5.61a
Size Driver
1.8MB
File Name
8200_modem.zip
Observations
Lucent modem driver
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 8200
Description
Panel
Operating System
Windows 95-98-NT4-2000
Size Driver
8.6MB
File Name
8200_panel.zip
Observations
SMI Control Panel program To install the control panel for the first time, insert floppy named disk1 and run the
the SETUP.EXE.
To upgrate the control panel to a newer version, please close the existing SMI control
panel before proceed. Error will occur during the installation if fail to do so. For
best result, remove the old version of the control panel first before installing the new
control panel.
for SM910, rotation mode is not supported.
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 8200
Description
SpeedStep
Operating System
Windows 95-98-NT4-2000
Version
V1.1
Size Driver
1.2MB
File Name
8200_speedstp.zip
Observations
SpeedStep only supports MP8000B series Notebooks.
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 8200
Description
Video Drivers
Operating System
Windows 95-98-NT4-2000
Size Driver
1.1MB
File Name
8200_vga.zip
Observations
1. Insert the Notebook support CD.
2. Double click [My Computer], double click [Control Panel],
double click [Display].
3. Select [Settings], then click [Display Type].
4. Click [Change], then click [Have Disk].
5. Click [Browse] to locate the VGA driver from the support CD,
the path is: \VGA\M8AC\NT40, then click [Open].
6. Click [OK] to confirm Install From Disk.
7. Click [OK] to confirm Change Display.
8. Click [Yes] to confirm Third-party Drivers.
9. Click [OK] to exit the display property.
10. Click [Close] twice, then click [Yes] to reboot.
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 8200
Description
Audio Drivers
Operating System
Windows 98
Version
V4.06.0538
Size Driver
5.5MB
File Name
8200_audw98.zip
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 8200
Description
Audio Drivers
Operating System
Windows 98Se
Version
V5.00.2234
Size Driver
3.3MB
File Name
8200_audw98se.zip
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 8200
Description
TouchPad
Operating System
Windows NT4
Version
V5.0.45
Size Driver
18.7MB
File Name
8200_thpwnt.zip
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 8200
Description
Audio Drivers
Operating System
Windows NT4
Version
V4.02.0019
Size Driver
5.6MB
File Name
8200_audwnt.zip
Access to Official Website Chem Usa
Welcome to the HelpDrivers, driver for printers.
Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more
You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.
Do not rename the file you're downloading, it may cause installation problems.