Available 21 files for Chem Usa ChemBook 2060
Select Files
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 2060
Description
Wireless LAN Driver and Application
Size Driver
63MB
File Name
2060_wlan.zip
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 2060
Description
CHKMIL Driver
Size Driver
538KB
File Name
2060_chkmail.zip
Observations
E-mail LED utility
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 2060
Description
Flash BIOS
Version
V2.07
Size Driver
364KB
File Name
2060_aflash2.zip
Observations
Utility to update flash BIOS
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 2060
Description
CRROM Driver
Size Driver
1.2MB
File Name
2060_cdrom.zip
Observations
MKE, Teac & Toshiba How to install the device driver under DOS environment
To operate TEAC CD-ROM,the device driver (TEAC_CDI.SYS) has to be installed
from INSTALLATION DISK came along with CD-ROM.
Please follow the instruction below.
1. Boot up the system and insert the INSTALLATION DISK into your floppy
disk drive.
2. At the DOS prompt,type "A:\INSTALL" then press enter. (If your floppy
disk drive is "A:")
3. Installation program will now start.Please follow the instructions on the
screen to complete the installation procedure.
4. When finish,remove the INSTALLATION DISK from the floppy disk drive then
REBOOT your system.
During system reboot,check for the following message to assure that
the driver was loaded properly.
MSCDEX Version 2.23
Copyright (C) Microsoft Corp. 1986-1993. All rights reserved.
Drive X: = Driver TEAC-CDI unit 0
* 'X:' ... Drive letter assigned to CD-ROM Drive
This message means that TEAC CD-ROM drive is now activated.
* Now the installation of TEAC CD-ROM drive is completed.
***** TEAC CD-ROM DRIVE Trouble Shooting Tips *****
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 2060
Description
Fast IR Driver
Operating System
Windows 2000
Size Driver
198KB
File Name
2060_fir.zip
Observations
How to set FIR device in Windows 2000/XP
========================================
1. Double click on "My Computer", double click on "Control Panel" and
double click on "System".
2. Click on "Hardware" Tab.
3. Click on "Device Manager"
4. Double click on "Infrared devices", and double click on "IrDA Fast Infrared Port".
5. Click on "Advanced" Tab after IrDA Fast Infrared Port Properties windows appeared.
6. In Value:, Choice "HP HSDL-2300/3600" for "Infrared Transceiver A".
7. Click "OK" and finished setting.
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 2060
Description
Network Drivers
Operating System
Windows 2000
Size Driver
119KB
File Name
2060_lanw2k.zip
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 2060
Description
TouchPad Drivers
Operating System
Windows 2000
Size Driver
6.3MB
File Name
2060_thpw2k.zip
Observations
Installing the Synaptics TouchPad Driver
-------------------------------------------
This driver requires Windows 2000 / WinXP.
NOTE REGARDING SAVING OF SETTINGS:
----------------------------------
Windows 2000 / WinXP does not save any of the user settings for users
belonging to the "Guests" user group. This includes special TouchPad
settings as well as all other user settings. If you want your
settings to be saved, make sure your user account does not belong to
the "Guests" group using the User Manager program (you must be
Administrator to change user settings).
NOTE REGARDING MULTIPROCESSOR MACHINES:
---------------------------------------
Though we believe it should work, this driver has not been tested on
any multiprocessor machines.
Installation procedure
-------------------------------------------------------
First, if you have a new TouchPad, plug it in and reboot Windows 2000 /
WinXP. Windows 2000 / WinXP will then detect your new TouchPad and
install a standard mouse driver to handle it. You cannot install the
Synaptics TouchPad driver until this process is complete and your
TouchPad is functioning as a normal pointing device.
Log on to your system as "Administrator", or as another user with
administrator privileges.
Run "Setup.exe". This program will automatically install the Synaptics
TouchPad driver to handle all PS/2 and Serial pointing devices
attached to your computer.
You will need to restart Windows after the installation is complete.
If the driver has been installed correctly, after you have restarted
Windows you should see the TouchPad Icon in your task bar next to the
clock. Also, a dialog box entitled "Information about your TouchPad"
will pop up. You can prevent this dialog box from coming up in the
future by checking the "Stop showing me this message" checkbox.
For help using your TouchPad, choose "Tell me more..." from the
"Information about your TouchPad" dialog box, or double-click on the
TouchPad Icon in your task bar, and click on the "Help" button.
If you wish to change one or more of your pointing devices to using
a standard Microsoft or other third party driver, you should bring
up the Mouse control panel, and select the "Hardware" tab. From there,
select the pointing device you want to change and click "Properties".
Select the "Driver" tab and Click "Update Driver...". Follow the
instructions to install a new driver.
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 2060
Description
Speedstep Utility
Operating System
Windows 2000
Size Driver
26.9MB
File Name
2060_spdstp.zip
Observations
Utility For Speedstep CPU
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 2060
Description
ATKACPI Driver
Operating System
Windows 2000
Size Driver
489KB
File Name
2060_atkw2k.zip
Observations
How to install ATK0100 ACPI Control Driver in Windows 2000
==================================================
Install:
========
1. During Win2000 OS found a "Unknown" device.
2. Click on "Search for a suitable driver for my device(recommended) and click "Next" button
3. Only choice "Specify a location" and click on "Next" button.
4. Click on "Browse..." to your driver location. (example: CDROM driver:\ATK0100\Win2000)
5. Click on "Open" button and "OK" button to start driver installation.
6. If OS request you to "Insert Disk", please "Browse..." to your driver location.
7. Click on "Finish" button.
8. You need to Restart System for driver work fine.
Uninstall:
==========
1. Double click [My Computer], double click [Control Panel],
double click [Add/Remove Programs].
2. Click on "ATK0100 ACPI UTILITY" item and click on "Change/Remove" button.
3. Click on "OK" button to restart system.
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 2060
Description
Audio Drivers
Operating System
Windows 2000-XP
Size Driver
1.7MB
File Name
2060_audio.zip
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 2060
Description
Powergear Utility
Operating System
Windows 2000-XP
Size Driver
582KB
File Name
2060_pwrger.zip
Observations
Power4 Gear Utility
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 2060
Description
Video Drivers
Operating System
Windows 2000-XP
Size Driver
26MB
File Name
2060_vga.zip
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 2060
Description
Ricoh Mediacard Driver
Operating System
Windows 2000-XP
Size Driver
1.4MB
File Name
2060_ricoh.zip
Observations
Ricoh MediaCard Controller
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 2060
Description
Flash BIOS
Operating System
Windows 2000-XP
Size Driver
909KB
File Name
2060_winflash.zip
Observations
Windows BIOS Flash utility
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 2060
Description
INF Update Utility
Operating System
Windows 2000-XP
Size Driver
5MB
File Name
2060_infupd.zip
Observations
Intel INF update utility This document contains the following sections:
1. Overview
2. System Requirements
3. Contents of the Distribution Package
4. List of Available Command Line Flag Options
5. Contents of the Extracted Files
6. Installing the Software in Interactive Mode
7. Installing the Software in Silent Mode
8. Installing the INF Files Prior to OS Installation
8A. Installing the Windows* 98SE/Windows* Me
INF Files Prior to OS Installation
8B. Installing the Windows* 2000 INF Files Prior
to OS Installation
8C. Installing the Windows* XP INF Files Prior
to OS Installation
8D. Installing the Windows Server* 2003 INF Files
Prior to OS Installation
9. Installing the INF Files After OS Installation
9A. Installing the Windows* 98SE/Windows* Me INF Files
after OS Installation
9B. Installing the Windows* 2000 INF Files after
OS Installation
9C. Installing the Windows* XP INF Files after
OS Installation
9D. Installing the Windows Server* 2003 INF Files after
OS Installation
10. Verifying Installation of the Software and
identifying the Software Version Number
11. Troubleshooting
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 2060
Description
Modem Driver
Operating System
Windows 2000-XP
Size Driver
1.3MB
File Name
2060_modem.zip
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 2060
Description
Network Drivers
Operating System
Windows XP
Size Driver
119KB
File Name
2060_lanwxp.zip
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 2060
Description
CPU_Hotfix Driver
Operating System
Windows XP
Size Driver
117.1MB
File Name
2060_hotfix.zip
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 2060
Description
TouchPad Drivers
Operating System
Windows XP
Size Driver
6.3MB
File Name
2060_thpwxp.zip
Observations
Installing the Synaptics TouchPad Driver
-------------------------------------------
This driver requires Windows 2000 / WinXP.
NOTE REGARDING SAVING OF SETTINGS:
----------------------------------
Windows 2000 / WinXP does not save any of the user settings for users
belonging to the "Guests" user group. This includes special TouchPad
settings as well as all other user settings. If you want your
settings to be saved, make sure your user account does not belong to
the "Guests" group using the User Manager program (you must be
Administrator to change user settings).
NOTE REGARDING MULTIPROCESSOR MACHINES:
---------------------------------------
Though we believe it should work, this driver has not been tested on
any multiprocessor machines.
Installation procedure
-------------------------------------------------------
First, if you have a new TouchPad, plug it in and reboot Windows 2000 /
WinXP. Windows 2000 / WinXP will then detect your new TouchPad and
install a standard mouse driver to handle it. You cannot install the
Synaptics TouchPad driver until this process is complete and your
TouchPad is functioning as a normal pointing device.
Log on to your system as "Administrator", or as another user with
administrator privileges.
Run "Setup.exe". This program will automatically install the Synaptics
TouchPad driver to handle all PS/2 and Serial pointing devices
attached to your computer.
You will need to restart Windows after the installation is complete.
If the driver has been installed correctly, after you have restarted
Windows you should see the TouchPad Icon in your task bar next to the
clock. Also, a dialog box entitled "Information about your TouchPad"
will pop up. You can prevent this dialog box from coming up in the
future by checking the "Stop showing me this message" checkbox.
For help using your TouchPad, choose "Tell me more..." from the
"Information about your TouchPad" dialog box, or double-click on the
TouchPad Icon in your task bar, and click on the "Help" button.
If you wish to change one or more of your pointing devices to using
a standard Microsoft or other third party driver, you should bring
up the Mouse control panel, and select the "Hardware" tab. From there,
select the pointing device you want to change and click "Properties".
Select the "Driver" tab and Click "Update Driver...". Follow the
instructions to install a new driver.
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 2060
Description
BIOS Updates
Operating System
Windows XP
Version
2.09g
Size Driver
425KB
File Name
2060_2.09g.exe
Company
Chem Usa
Categories
Notebooks & Tablet PCs
Model
Chem Usa ChemBook 2060
Description
ATKACPI Driver
Operating System
Windows XP
Size Driver
488KB
File Name
2060_atkwxp.zip
Observations
How to install ATK0100 ACPI Control Driver in Windows XP
=========================================================
Install:
========
1. During WinXP OS found a "Unknown" device.
2. Click on "Search for a suitable driver for my device(recommended) and click "Next" button
3. Only choice "Specify a location" and click on "Next" button.
4. Click on "Browse..." to your driver location. (example: CDROM driver:\ATK0100\WinXP)
5. Click on "Open" button and "OK" button to start driver installation.
6. If OS request you to "Insert Disk", please "Browse..." to your driver location.
7. Click on "Finish" button.
8. You need to Restart System for driver work fine.
Uninstall:
==========
1. Double click [My Computer], double click [Control Panel],
double click [Add/Remove Programs].
2. Click on "ATK0100 ACPI UTILITY" item and click on "Change/Remove" button.
3. Click on "OK" button to restart system.
Access to Official Website Chem Usa
Welcome to the HelpDrivers, driver for printers.
Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more
You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.
Do not rename the file you're downloading, it may cause installation problems.