Available 10 files for Linksys LNE100TX
Select Files
Company
Linksys
Categories
Networks Cards
Model
Linksys LNE100TX
Description
v5 Fast EtherNet Adapter
Operating System
Windows 2000
Version
2.10.0402
Size Driver
26KB
File Name
linksys_lne100tx_v5_w2k.zip
Observations
Content:
--------
Installing the Linksys LNE100TX(v5) Fast Ethernet Adapter driver
on Windows 2000:
1. Power off your PC and install the network card.
2. Turn on power again and then boot up Windows 2000.
3. Window system will show "Ethernet Controller" in
"Install Hardware Device Drivers" dialog box.
4. Select "Search for a suitable driver for your device
(Recommended)" from "Install Hardware Device Drivers"
dialog box and then click "Next".
5. When system shows "Locate Driver Files" screen, please
select "Specify a location" option and click "Next".
6. When the "Found New Hardware Wizard" dialog box is
appeared, please insert the LNE100TX(v5) Driver Disk
in your floppy drive.
7. Enter the driver pathname, i.e. A:\Win2000, then click
"OK" icon from "Found New Hardware Wizard" dialog box.
8. When the "Driver File Search" dialog box is shown,
please click "Next".
9. When the "Insert Disk" dialog box is shown, please click
"OK".
10. When the "Files Needed" dialog box is shown, please select
"Browse" icon to find out the driver (located on a:\Win2000),
and then click "OK".
11. When the "Hardware Install" dialog box is shown, the screen
will show the following adapter name.
"Linksys LNE100TX(v5) Fast Ethernet Adapter"
Please click "Finish" to complete the installation.
Company
Linksys
Categories
Networks Cards
Model
Linksys LNE100TX
Description
Fast EtherNet Adapter LNE100TX
Operating System
Windows 2000-XP
Version
v4
Size Driver
23KB
File Name
linksys_lne100_v4_w2k.zip
Observations
Content:
--------
Installing the Linksys LNE100TX Fast Ethernet Adapter driver
on Windows 2000:
1. Power off your PC and install the network card.
2. Turn on power again and then boot up Windows 2000.
3. Window system will show "Ethernet Controller" in
"Install Hardware Device Drivers" dialog box.
4. Select "Search for a suitable driver for your device
(Recommended)" from "Install Hardware Device Drivers"
dialog box and then click "Next".
5. When system shows "Locate Driver Files" screen, please
select "Specify a location" option and click "Next".
6. When the "Found New Hardware Wizard" dialog box is
appeared, please insert the LNE100TX Driver Disk
in your floppy drive.
7. Enter the driver pathname, i.e. A:\WIN2000, then click
"OK" icon from "Found New Hardware Wizard" dialog box.
8. When the "Driver File Search" dialog box is shown,
please click "Next".
9. When the "Insert Disk" dialog box is shown, please click
"OK".
10. When the "Files Needed" dialog box is shown, please select
"Browse" icon to find out the driver (located on a:\WIN2000),
and then click "OK".
11. When the "Hardware Install" dialog box is shown, the screen
will show the following adapter name.
"Linksys LNE100TX Fast Ethernet Adapter(LNE100TX v4)"
Please click "Finish" to complete the installation.
12. Restart your computer.
Company
Linksys
Categories
Networks Cards
Model
Linksys LNE100TX
Description
Fast EtherNet Adapter LNE100TX
Operating System
Windows 95
Version
v4
Size Driver
20KB
File Name
linksys_lne100tx_v5_95.zip
Observations
Content:
--------
A.) Installing the Linksys driver on Win95, Win95-OSR2
1. Plug Linksys LNE100TX(v5) Fast Ethernet Adapter
into one of the Master PCI slots of your PCI platform.
2. Turn power on then boot from Windows 95 (or Windows
95-OSR2).
3. Window system will prompt Fast Ethernet PCI Controller in
New Hardware Found dialog box.
4. Select "Driver from disk provided by hardware manufacturer"
from New Hardware Found dialog box, then click OK button.
5. Insert the LNE100TX(v5) Driver Diskette in your floppy drive.
6. Enter the driver pathname, i.e. A:\win95 , then
click "OK" button from Install from Disk dialog box.
7. When the system has selected your installed adapter,
the screen will show the following adapter name.
"Linksys LNE100TX(v5) Fast Ethernet Adapter"
8. Follow screen instructions to complete the process.
9. Restart your computer.
Company
Linksys
Categories
Networks Cards
Model
Linksys LNE100TX
Description
Fast EtherNet Adapter LNE100TX
Operating System
Windows 95-98-98Se-Me
Version
v4
Size Driver
29KB
File Name
linksys_lne100_v4_95.zip
Observations
Content:
--------
A.) Installing the Linksys driver on Win95, Win95-OSR2
1. Plug Linksys LNE100TX Fast Ethernet Adapter(LNE100TX v4)
into one of the Master PCI slots of your PCI platform.
2. Turn power on then boot from Windows 95 (or Windows
95-OSR2).
3. Window system will prompt Fast Ethernet PCI Controller in
New Hardware Found dialog box.
4. Select "Driver from disk provided by hardware manufacturer"
from New Hardware Found dialog box, then click OK button.
5. Insert the LNE100TX Driver Diskette in your floppy drive.
6. Enter the driver pathname, i.e. A:\win95 , then
click "OK" button from Install from Disk dialog box.
7. When the system has selected your installed adapter,
the screen will show the following adapter name.
"Linksys LNE100TX Fast Ethernet Adapter(LNE100TX v4)"
8. Follow screen instructions to complete the process.
9. Restart your computer.
Company
Linksys
Categories
Networks Cards
Model
Linksys LNE100TX
Description
Fast EtherNet Adapter
Operating System
Windows 95-98-98Se-Me
Version
4.15
Size Driver
24KB
File Name
linksys_lne100.zip
Observations
CONTENTS:
Before You Begin
Setup
Enabling File & Printer Sharing
Technical Support
Before You Begin
----------------------------------------------------------------------
Thank you for purchasing your EtherFast 10/100 LAN Card from Linksys.
The instructions below explain how to set up the card's network
software drivers for use with your particular network operating system
like Windows 95, Novell, Unix, etc.
The EtherFast card is built for use in 32-bit, Plug-and-Play desktop
computers with auto-configuring PCI slots. It must be used in your
PC's bus master PCI slot. For further information, see the User Guide
that came with the card.
When a PCI card is used in a computer that has a Plug-and-Play BIOS
(Basic Input/Output System), the card is automatically configured by
the PC each time the machine is booted. The card's IRQ, memory address,
and other operating parameters are automatically assigned. There is
no way to change a Plug-and-Play card's IRQ and other settings outside
of the BIOS menu(s) that your computer providse. If the resources that
are assigned to your EtherFast card seem to conflict with other devices
in your computer, you will need to use your system's BIOS to resolve
the conflicts.
If you have problems configuring your BIOS or resolving IRQ or other
hardware conflicts, consult your computer manual or contact your PC's
manufacturer for BIOS setup & configuration directions.
Here are some general guidelines to follow when installing a PCI card
(like the EtherFast card) into your computer:
* If you need to configure your PC's BIOS in order to resolve an
IRQ or other conflict with the EtherFast card, there are a few
possibilities:
- Your PCI may not allow you to change the IRQ value(s) of
the PCI slot(s). In this case, you will ONLY be able to
use the IRQ & MEM values that have been pre-assigned to
each slot. The popular BIOS from Phoenix, for example,
does not allow you to modify BIOS-assigned IRQ settings.
- You may be able to change the IRQ & MEM values for a given
PCI slot by setting jumpers on your PC's mother board.
Please refer to your PC's motherboard user guide for
specific instructions.
- Your PC may allow you to change the IRQ & MEM values for
a given PCI slot by accessing the PC's BIOS setup menu.
Please refer to your PC's user guide for specific details.
The BIOSs from companies like AMI and Award are fully
customizable from their BIOS menus, for example.
* When loading the EMM386.EXE program in your computer's CONFIG.SYS,
you MUST use version MS-DOS 6.22 or above. If you load an older
EMM386.EXE program (below DOS 6.22), your computer will hang up while
loading the network driver.
* The EtherFast LAN adapter should be used in a 32-bit PCI slot that
supports PCI Local Bus Mastering. It cannot be plugged into a PCI
Bus Slave slot. Consult your motherboard's documentation for more
information on master & slave slots.
* When using NT, set your BIOS PCI settings, and the PCI settings
within NT itself, to MANUAL. NT is *not* a Plug-and-Play BIOS,
and will not usually recognize LAN cards if they are set to be
automatically detected & configured.
Company
Linksys
Categories
Networks Cards
Model
Linksys LNE100TX
Description
21140 chip PCI Fast EtherNet Adapter
Operating System
Windows 95-98-98Se-Me
Version
v3.1
Size Driver
35KB
File Name
linksys_lne100_digital.zip
Observations
[version]
LayoutFile=layout.inf
signature="$WINDOWS 95$"
Class=Net
provider=%V_MS%
[Manufacturer]
%V_Vendor%=Linksys
[Linksys]
%21041.DeviceDesc%=21041.ndi, PCI\VEN_1011&DEV_0014
%21140.DeviceDesc%=21140.ndi, PCI\VEN_1011&DEV_0009
%21040.DeviceDesc%=21040.ndi, PCI\VEN_1011&DEV_0002
[21040.ndi]
AddReg=21040.ndi.reg,21x4.ndi.reg,21x4.pci.reg,21040.con.reg
CopyFiles=netdlk.inf.CopyFiles,21x4.ndis3.CopyFiles,21x4.ndis2.CopyFiles
RenFiles=netpci.inf.RenameFiles
[21041.ndi]
AddReg=21041.ndi.reg,21x4.ndi.reg,21x4.pci.reg,21041.con.reg
CopyFiles=netdlk.inf.CopyFiles,21x4.ndis3.CopyFiles,21x4.ndis2.CopyFiles
RenFiles=netpci.inf.RenameFiles
[21140.ndi]
AddReg=21140.ndi.reg,21x4.ndi.reg,21x4.pci.reg,21140.con.reg
CopyFiles=netdlk.inf.CopyFiles,21x4.ndis3.CopyFiles,21x4.ndis2.CopyFiles
RenFiles=netpci.inf.RenameFiles
[21040.ndi.reg]
HKR,Ndi,DeviceID,,"PCI\VEN_1011&DEV_0002"
HKR,,AdapterCFID,,00021011
[21041.ndi.reg]
HKR,Ndi,DeviceID,,"PCI\VEN_1011&DEV_0014"
HKR,,AdapterCFID,,00141011
;HKR,Ndi\params\SnoozeMode,ParamDesc,,"Snooze Mode"
;HKR,Ndi\params\SnoozeMode,default,,0
;HKR,Ndi\params\SnoozeMode,type,,enum
;HKR,Ndi\params\SnoozeMode\enum,0,,"Disabled"
;HKR,Ndi\params\SnoozeMode\enum,1,,"Enabled"
;HKR,NDI\params\SnoozeMode,flag,1,20,00,00,00
[21140.ndi.reg]
HKR,Ndi,DeviceID,,"PCI\VEN_1011&DEV_0009"
HKR,,AdapterCFID,,00091011
;StoreAndForward Driver will auto adjust
HKR,Ndi\params\StoreAndForward,ParamDesc,,"Store And Forward"
HKR,Ndi\params\StoreAndForward,default,,0
HKR,Ndi\params\StoreAndForward,type,,enum
HKR,Ndi\params\StoreAndForward\enum,0,,"Disabled"
HKR,Ndi\params\StoreAndForward\enum,1,,"Enabled"
HKR,NDI\params\StoreAndForward,flag,1,20,00,00,00
;Transmit Threshold
HKR,Ndi\params\TransmitThreshold,ParamDesc,,"Transmit Threshold"
HKR,Ndi\params\TransmitThreshold,default,,A0
HKR,Ndi\params\TransmitThreshold,type,,enum
HKR,Ndi\params\TransmitThreshold\enum,48,," 72 bytes"
HKR,Ndi\params\TransmitThreshold\enum,60,," 96 bytes"
HKR,Ndi\params\TransmitThreshold\enum,80,," 128 bytes"
HKR,Ndi\params\TransmitThreshold\enum,A0,," 160 bytes"
HKR,Ndi\params\TransmitThreshold\enum,100,," 256 bytes"
HKR,Ndi\params\TransmitThreshold\enum,200,," 512 bytes"
HKR,Ndi\params\TransmitThreshold\enum,400,,"1024 bytes"
HKR,NDI\params\TransmitThreshold,flag,1,20,00,00,00
Company
Linksys
Categories
Networks Cards
Model
Linksys LNE100TX
Description
v5 Fast EtherNet Adapter
Operating System
Windows 98-98Se
Version
2.10.0402
Size Driver
26KB
File Name
linksys_lne100tx_v5_98.zip
Observations
Content:
--------
A.) Installing the Linksys driver on Win98
1. Plug Linksys LNE100TX(v5) Fast Ethernet Adapter
into one of the Master PCI slots of your PCI platform.
2. Turn power on then boot from Windows 98.
3. Window system will prompt Fast Ethernet PCI Controller in
New Hardware Found dialog box.
4. Select "Driver from disk provided by hardware manufacturer"
from New Hardware Found dialog box, then click OK button.
5. Insert the LNE100TX Driver Diskette in your floppy drive.
6. Enter the driver pathname, i.e. A:\Win98 , then
click "OK" button from Install from Disk dialog box.
7. When the system has selected your installed adapter,
the screen will show the following adapter name.
"Linksys LNE100TX(v5) Fast Ethernet Adapter"
8. Follow screen instructions to complete the process.
9. Restart your computer.
Company
Linksys
Categories
Networks Cards
Model
Linksys LNE100TX
Description
Fast EtherNet Adapter LNE100TX
Operating System
Windows 98-98Se-Me-2000
Version
v4
Size Driver
23KB
File Name
linksys_lne100_v4_98.zip
Observations
Content:
--------
A.) Installing the Linksys driver on Win98
1. Plug Linksys LNE100TX Fast Ethernet Adapter(LNE100TX v4)
into one of the Master PCI slots of your PCI platform.
2. Turn power on then boot from Windows 98.
3. Window system will prompt Fast Ethernet PCI Controller in
New Hardware Found dialog box.
4. Select "Driver from disk provided by hardware manufacturer"
from New Hardware Found dialog box, then click OK button.
5. Insert the LNE100TX Driver Diskette in your floppy drive.
6. Enter the driver pathname, i.e. A:\win98 , then
click "OK" button from Install from Disk dialog box.
7. When the system has selected your installed adapter,
the screen will show the following adapter name.
"Linksys LNE100TX Fast Ethernet Adapter(LNE100TX v4)"
8. Follow screen instructions to complete the process.
9. Restart your computer.
Company
Linksys
Categories
Networks Cards
Model
Linksys LNE100TX
Description
v5 Fast EtherNet Adapter
Operating System
Windows Me
Version
2.10.0402
Size Driver
26KB
File Name
linksys_lne100tx_v5_me.zip
Observations
Content:
--------
A.) Installing the Linksys driver on WinME
1. Plug Linksys LNE100TX(v5) Fast Ethernet Adapter
into one of the Master PCI slots of your PCI platform.
2. Turn power on then boot from Windows ME.
3. Window system will prompt Fast Ethernet PCI Controller in
New Hardware Found dialog box.
4. Select "Driver from disk provided by hardware manufacturer"
from New Hardware Found dialog box, then click OK button.
5. Insert the LNE100TX Driver Diskette in your floppy drive.
6. Enter the driver pathname, i.e. A:\WinME , then
click "OK" button from Install from Disk dialog box.
7. When the system has selected your installed adapter,
the screen will show the following adapter name.
"Linksys LNE100TX(v5) Fast Ethernet Adapter"
8. Follow screen instructions to complete the process.
9. Restart your computer.
Company
Linksys
Categories
Networks Cards
Model
Linksys LNE100TX
Description
Fast EtherNet Adapter LNE100TX
Operating System
Windows Me
Version
v4
Size Driver
22KB
File Name
linksys_lne100_v4_me.zip
Observations
[version]
Signature = "$CHICAGO$"
Compatible = 1
Class = Net
ClassGUID = {4d36e972-e325-11ce-bfc1-08002be10318}
Provider = %Linksys%
;LayoutFile = layout.inf ;; for put-on-list
CatalogFile = netlnev4.cat ;; for WHQL certified
DriverVer = 08/01/2000, 2.10.01.02
[Manufacturer]
%Linksys% = Linksys
[ControlFlags]
ExcludeFromSelect = PCI\VEN_1317&DEV_0985
[Linksys]
%lne100v4.DeviceDesc% = lne100v4.ndi, PCI\VEN_1317&DEV_0985&SUBSYS_05741317
;;----------------------------;;
;; Windows 98 ;;
;;----------------------------;;
[lne100v4.ndi]
AddReg = lne100v4.Reg, lne100v4.pci.reg, lne100v4.con.reg
CopyFiles = lne100v4.ndis.copyfiles
;;----------------------------;;
;; Windows 2000 ;;
;;----------------------------;;
[lne100v4.ndi.NT]
Characteristics = 0x84
BusType = 5
AddReg = lne100v4.ndi.reg, lne100v4.pci.reg, lne100v4.con.reg
CopyFiles = lne100v4.ndis.copyfiles.NT
[lne100v4.ndi.NT.Services]
AddService = lne100v4, 2, lne100v4.Service, lne100v4.EventLog
[lne100v4.ndis.copyfiles]
lne100v4.sys,,,2
[lne100v4.ndis.copyfiles.NT]
lne100v4.sys,,,2
;;-------------------------------------------------------------------------
;; Windows 98 Parameters
;;-------------------------------------------------------------------------
[lne100v4.Reg]
;; key,subkey,valuname,type,value
HKR, NDI, DeviceID, , "PCI\VEN_1317&DEV_0985"
HKR, , DevLoader, , *ndis
HKR, , DeviceVxDs, , lne100v4.sys
HKR, , AdapterCFID, , 09851317
;;Parameters
HKR, , AdapterType, , 5
HKR, , BusType, , 5
;;NDIS Info
HKR, NDIS, MajorNdisVersion, 1, 04
HKR, NDIS, MinorNdisVersion, 1, 00
HKR, NDIS, LogDriverName, , "lne100v4"
;;Interfaces
HKR, Ndi\Interfaces, DefUpper, , "ndis3"
HKR, Ndi\Interfaces, DefLower, , "ethernet"
HKR, Ndi\Interfaces, UpperRange, , "ndis3"
HKR, Ndi\Interfaces, LowerRange, , "ethernet"
Access to Official Website Linksys
Welcome to the HelpDrivers, driver for printers.
Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more
You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.
Do not rename the file you're downloading, it may cause installation problems.