Available 1 files for Kingmax KEN0100-RF

Company

Kingmax

Categories

Networks Cards

Model

Kingmax KEN0100-RF

Description

Drivers

Operating System

Windows 95-98-NT-2000

Size Driver

549KB

File Name

0100-r_v1.2.exe

Observations

1. DISKETTE CONTENTS
2. ENABLER
3. DIAGNOSTIC PROGRAM
4. NETWARE DOS ODI DRIVER
5. PACKET DRIVER
6. NDIS2 DRIVER FOR ARTISOFT LANTASTIC V6.0
7. NDIS2 DRIVER FOR WINDOWS FOR WORKGROUPS 3.11
8. NDIS2 DRIVER FOR LAN MANAGER V2.1
9. NDIS4 DRIVER FOR WINDOWS 95
10. NDIS4 DRIVER FOR WINDOWS 98
11. NDIS4 DRIVER FOR WINDOWS NT 4.0
12. NDIS5 DRIVER FOR WINDOWS 2000
13. LINUX DRIVER

[1] DISKETTE CONTENTS

Files and
Subdirectories Contents
--------------------------------------------------------------------
\README.TXT This file
\CBRSET.EXE DOS Mode Setup And Diagnostic Program
\RTPCI.EXE DOS Mode CardBus Enabler
\RTBIOS.COM DOS Mode CardBus BIOS Enhancer (for command prompt)
\RTBIOS.SYS DOS Mode CardBus BIOS Enhancer (for CONFIG.SYS)
\CARDGO.BAT PCMCIA Client Batch File
\EN0100R.INF Setup file for Windows 95 / 98
\EN0100R.SYS NDIS driver for Windows 95 / 98
\WFW311 Directory of NDIS V2.0 Enhance Mode Driver for WFW311
\MSLANMAN.DOS Directory of NDIS V2.0 Driver for Lan Manager V2.1
\NDIS2 Directory of NDIS V2.0 Driver
\NETWARE.ODI Directory of Novell Netware DOS ODI Driver
\PKTDRV Directory of FTP Compliant Packet Driver Directory
\LANTASTI.V60 Directory of NDIS V2.0 Driver for Lantastic V6.0
\WIN2000 Directory of NDIS5 Driver for Windows 20000
\WINDIAG\NT4 Directory of Diagnostic Program for Windows NT 4.0
\WINDIAG\WIN9X Directory of Diagnostic Program for Windows 9x
\WINDIAG\WIN2000 Directory of Diagnostic Program for Windows 2000
\WINNT40 Directory of NDIS V3.1 Driver for Windows NT 4.0

[2] ENABLER (For DOS and Windows 3.1 Only)

The enabler is a CardBus controller enable program. This enable
program only need for DOS and Windows 3.x system. It does not require
the Card & Socket Services driver to be loaded.
To load the enabler properly, check your system file config.sys.
Add this line
"device=c:\DOS\himem.sys"
In order to work well with emm386, remove the argument "NOEMS" as
"device=c:\dos\emm386"
or edit it as
"device=c:\dos\emm386 x=d000-d3ff"
or remark it as
"rem device=c:\dos\emm386"

To load the enabler program, type

CARDGO [/iXX][/mXXXX][/?]

in DOS command line, or

DEVICE=[PATHNAME]RTPCI.EXE [/iXX][/mXXXX]
DEVICE=[PATHNAME]RTBIOS.SYS

in config.sys file.

where:

[/iXX] This specifies the hardware interrupt (IRQ) where your
card will be indicated.
The valid IRQs are 0-15.

[/pXXXX] This specifies the IO Base address. The valid
MEMs are 1000-FF80.