Available 3 files for Keydata Keynote 8320 - Green 732

Company

Keydata

Categories

Networks Cards

Model

Keydata Keynote 8320 - Green 732

Description

User Manual 15 Inch LCD

Information

User Manual

Operating System

Manual

Size Driver

3.2MB

File Name

8320-15.pdf

Observations

The best kind of AC power source to connect your Notebook to is a UPS (Uninterruptible Power Supply). Lacking this, use a power strip with a built-in surge protector. Do not use inferior extension cords as this may result in damage to your Notebook. The Notebook comes with its own AC adapter. Do not use a different adapter to power the computer and other electrical devices.
Whenever possible, keep the AC adapter plugged into the Notebook and an electrical outlet to recharge the battery.
Never turn off or reset your Notebook while the hard disk is in use and the HDD status icon is lit; doing so can result in loss or destruction of your data. Always wait at least 5 seconds after turning off your Notebook before turning it back on; turning the power on and off in rapid succession can damage the Notebook’s electrical circuitry.
Turning On Your Notebook Computer
Turn on your Notebook by pressing the power button. Hold the button down for a second or two and release. The Power-On Self Test (POST) runs automatically.
After the POST is completed, the computer reads the operating system from the hard disk drive into computer memory (this is commonly referred to as “booting” a computer). If your OS (Operating System such as Windows ME, Windows 2000…. etc) is installed, it should start automatically.
To turn the Notebook off, save your work and close all open applications, click on Start, then Shut Down and select Shut down the computer and click "Yes" or press the power button for 4-6 seconds.
Operating on Battery Power
Your computer comes with a rechargeable battery pack that lets you operate the computer without an external power source. When the battery pack is fully charged, you can operate the computer for approximately 2 hours under the following conditions:

Company

Keydata

Categories

Networks Cards

Model

Keydata Keynote 8320 - Green 732

Description

User Manual 16 Inch LCD

Information

User Manual

Operating System

Manual

Size Driver

3.2MB

File Name

8320-16.pdf

Observations

Please read these safety instructions carefully.
Please keep this User's Manual for later reference.
Please disconnect this equipment from AC outlet before cleaning. Don't use liquid or sprayed detergent for cleaning. Use moisture sheet or cloth for cleaning.
For pluggable equipment, that the socket-outlet shall be installed near the equipment and shall be easily accessible.
Please keep this equipment from humidity.
Lay this equipment on a reliable surface when installed. A drop or fall could cause injury.
Make sure to use the right voltage for the power source when connecting the
equipment to the power outlet.
Place the power cord in such a way that people can not step on it. Do not place anything on top of the power cord.
All cautions and warnings on the equipment should be noted.
If the equipment is not use for a long time, disconnect the equipment from the main power outlet to avoid being damaged by transient overvoltage.
Never pour any liquid into the opening, this could cause fire or electrical shock.
Never open the equipment. For safety reason, the equipment should only be opened by a qualified service personnel.
If on the following situations arises, get the equipment checked by a service personnel:
The Power cord or plug is damaged.
Liquid has penetrated into the equipment.
The equipment has been exposed to moisture.
The equipment has not worked well or you cannot get it work according to the user's manual.
The equipment has dropped and damaged.
If the equipment has obvious sign of breakage.
Do not leave this equipment in an environment unconditioned, storage temperature above 60°C (140°f), it may damage the equipment.
The unit can be operated at an ambient temperature of max. 35°C.
The sound pressure level at the operators position according to IEC 704-1: 1982 is equal or less than 70 dB(A).
Power Cord Requirements The power cord set used with the AC adaptor must meet the requirements of the country where you use the AC adaptor, whether it is 100-120 or 200-240 Vac. The following information explains the requirements for power cord set selection.
• The cord set must be approved for the country in which it is used.
• The appliance coupler must have a configuration for mating with a CEE22/EN6032/IEC 320 appliance inlet.

Company

Keydata

Categories

Networks Cards

Model

Keydata Keynote 8320 - Green 732

Description

Lan Port Driver

Operating System

Windows 95-98-Me-NT-2000

Size Driver

6MB

File Name

8320-lan-win3_252b_novell.exe

Observations

SiS PCI Fast Ethernet Adapter Diagnostic Program 1.10.02
===============
This Diagnostic program contains the following functions:

1. Adapter Information
2. Diagnostic Tests

(1). Adapter Information

1.1 Display Adapter Information, including
Chip ID 0900
Node ID 00 E0 06 XX XX XX
Bus Mode PCI 32-bit
Media type 100 Half Duplex
I/O Base Address 6000
Interrupt Number 0B
PHY Address 0X
MII ID XXXX XXXX

1.2 Set Media Type -- User can select one of the following
media type here. Once the media type is selected, the
latter Diagnostic Tests will be run with this media type.

Auto Config
10 Mbps Half
10 Mbps Full
100 Mbps Half
100 Mbps Full


(2). Diagnostic Tests

Basic Tests : Include following 3 basic tests.
PCI registers I/O test
MAC registers I/O test
MII registers I/O test
Controller Loopbacks : Test MAC internal loopback mode.


Send Magic Packet : Specify Destination Address and Send a
magic packet to wake-up other PC.

Send Wake-up Frame : Specify wake-up frame to wake-up other
PC.

Set Wake-up Event : Set wake-up event to SIS LAN adapter.

(Note) After the wake-up event being set, the system will automatically
become S5 mode either by press any key or wait for 5 seconds.

2 Station Test : To run this test, you need two station, Sender and
Reponder, connected with an ethernet cable.

Sender : Send packet and wait for response
Responder: Listen packet from sender and send response to sender