Available 2 files for Hawking UF100

Company

Hawking

Categories

Networks Cards

Model

Hawking UF100

Description

Drivers

Operating System

Windows 2000

Size Driver

372KB

File Name

ufe1000.exe

Observations

Contents:

Before You Begin
Hardware Setup
Software Setup
Enabling File & Printer Sharing Under Windows 98
Troubleshooting

----------------------------------------------------------------------------
BEFORE YOU BEGIN
----------------------------------------------------------------------------
Your computer must meet the following requirements to be compatible
with the USB Network Adapter:

1. In order to use this device, you must have a copy of Microsoft
Windows 98 operating system installed on your PC. Some versions
of Windows 95 version B (OSR2) support USB, but the device
drivers included in this package are designed specifically for
Windows 98. If you do not have Windows 98, this device will not
work.

2. Also, the device requires that a USB port is installed and
enabled on your PC. Some PCs have a USB port, but it is disabled.
Usually there is a toggle switch on the motherboard that will
enable a PC's USB port. Consult your computer's user guide. Some
motherboards have USB interfaces, but no ports. You should be
able to install your own USB port and attach it to your PC's
motherboard using hardware purchased at any computer store.
----------------------------------------------------------------------------
HARDWARE SETUP
----------------------------------------------------------------------------
The USB Network Adapter comes with a USB cable. One end of the cable
has a rectangular plug, which is called an A-type connector. The other
end of the cable has a square plug, or B-type connector.

The adapter has two ports. One is for RJ-45 UTP network cabling -- it
looks like and over-sized phone jack. The other port looks like a
square hole -- this is the USB B-type port.

1. Make sure your PC is powered on and that you are at the Windows 98
desktop.

2. Insert the cable's square B-type plug into the adapter's B-type
port.

3. Insert the other end of the USB cable (the A-type connector) into
the USB port on your PC. The adapter is now connected to your PC.

4. Connect your adapter to a 10Mbps or 10Mbps/100Mbps auto-sensing
hub using Category 5 UTP RJ-45 straight-through cabling. The RJ-45
jacks should fit into the RJ-45 port on both the adapter and the
hub.

NOTE: Do not connect the USB Network Adapter directly to another
network card or adapter.
----------------------------------------------------------------------------
SOFTWARE SETUP
----------------------------------------------------------------------------
Before you begin the installation, you should have your original
Windows 98 CD-ROM handy. Windows 98 may ask for it in order to
install special files onto your computer during the network driver
setup. When this occurs, insert your CD-ROM or other media into the
drive and tell Windows 98 to look in the \win98 directory on the
appropriate drive. For example, if your CD-ROM is drive D: on your
system, and Windows 98 is requesting a file from it, you would type in
D:\win98 and press Enter in order to inform 98 of the CD-ROM's
location. If Windows 98 came pre-installed on your computer, you
might also be able to find the files you need in the
c:\windows\options\cabs folder on your hard drive if there is one.

Company

Hawking

Categories

Networks Cards

Model

Hawking UF100

Description

Drivers

Operating System

Windows XP

Size Driver

46KB

File Name

uf100xpdriver.exe

Observations

Hawking UF-100 USB 10/100Mbase-TX Fast Ethernet Network Adapter
Windows XP Installation Instruction

1. Locate the "uf100xpa.exe" file and double-click on it to unzip or extract the files.
Delete the writing in the "unzip to folder" field.

2. Type in "C:\UF100" into the "Unzip to folder" field, then click on "Unzip".
Note: You can unzip the "uf100.exe" file to any device location you choose,
but keep in mind you will need to write down tha path where you unzipped
the files to for later reference.

3. Click OK and then click on the "Close" button. You now have successfully unzip
the UF100 driver to "C:\UF100".

4. Turn on your Windows XP laptop, once you have inseted the UF100 into your laptop.
The "Found New Hardware Wizard" window will appear. Select "Install from a list of
specific location (Advanced)". Click "Next>".

5. Click on "Search for the best driver in these locations" and check "include
this location in the search:" then in "C:\UF100". Click "Next".
Note. If you unzipped the "uf100xpa.exe" file to another location, please type in the
correct path or "browse" to the correct path where the unzipped filed are located.

6. You will see the "Hardware Installation" warning message (such as:
USB 10/100 Fast Ethernet has not passed Windows Logo Testing...). Click the
"Continue Anyway" button to continue.

7. You will see the "Completing the Found New Hardware Wizard". Click
"Finish" to complete the installation.

8. You will see the following message on your system tray afetr clicking "Finish".

Found New Hardware
Your new Hardware is installed and ready to use.