Available 4 files for Exp ThinLan 110

 

Select Files

Company

Exp

Categories

Networks Cards

Model

Exp ThinLan 110

Description

New version

Operating System

Windows 2000

Size Driver

41KB

File Name

lna100n2000.exe

Company

Exp

Categories

Networks Cards

Model

Exp ThinLan 110

Description

New version

Operating System

Windows 3.x-95-98-NT3.51 or higher

Version

4.0

Size Driver

447KB

File Name

lna-100n.exe

Observations

[1]. Diskette Contents
[2]. Installation for DOS ODI Driver
[3]. Installation for CLIENT32 Driver
[4]. Installation for DOS Packet Driver
[5]. Installation for Microsoft Windows 95/98
[6]. Installation for Microsoft Windows NT 3.51
[7]. Installation for Microsoft Windows NT 4.0
[8]. Installation for Linux Series
[9]. Installation for NDIS2 Driver
[10]. Copyrights, Trademarks, and Disclaimers
[1] Diskette Contents

Files Contents
------------------------------------------------------------------
\README.TXT This File
\ENABLER DOS PCMCIA Enable Program
\ODI Novell Netware DOS ODI Driver
\PKTDRV FTP Compliant Packet Driver
\WIN95 NDIS Driver for Windows 95
\WIN98 NDIS Driver for Windows 98
\WNT351 NDIS Driver for Windows NT 3.51
\WNT40 NDIS Driver for Windows NT 4.0
\Manual\Manual.HTM Manual Document
[2]. Installation for DOS ODI Driver

1. For those who installed EMM386.EXE in your config.sys, please exclude
memory address D400-D7FF from your system. PCMCIA Ethernet card enabler
program will use this space to read Ethernet ID and CIS from on-board
flash memory.
[Example]
DEVICE=EMM386.EXE NOEMS X=D400-D7FF
or
DEVICE=EMM386.EXE NOEMS X=D000-DFFF

2. User need to add "LASTDRIVE=[Device Name]" in the Config.sys file,
then reboot Notebook. Example, if you want to login to Device "N",
the string is "LASTDRIVE=M".

3. Enable the FastEthernet PC Card
The EN100.EXE is a PCMCIA controller enabling program. This enable
program only need for DOS and Windows 3.1 system. You don't need
installed the Socket and Card service in your Notebook before
executing the enabler.
In DOS command, go to "\ODI", then type "EN100 [/IRQ:x][/IOP:xxx]"
* IRQ - system interrupt number required for the FastEthernet card.
* IOP - card's I/O port address assignment in HEX format.
The default syntax is "EN100 /IRQ:5 /IOP:300".

4. Getting Started the Novell DOS ODI Driver:
This directory "\ODI" contains FastEthernet DOS ODI driver.
You need the following files to install DOS ODI DRIVER.
a. LSL.COM: supplied by Novell
b. PCM100.COM: DOS ODI driver, supplied by card manufacturer
c. IPXODI.COM: supplied by Novell
d. NETX.EXE: supplied by Novell
e. NET.CFG: optional configuration file

Type "STARTNET" at the DOS prompt will execute the files above,
then you can login to the file server.

[3]. Installation for CLIENT32 Driver
1. If you have completed installed the Netware Client 32 for DOS, all
you have to do is to modify STARTNET.BAT. Please see the sample
STARTNET.BAT above. If not, Please follow the next step 2 - step 7.

2. Run INSTALL.EXE from Netware Client 32 for DOS diskette 1 (or from
Netware 4.11 CD). When the product manual appears, mark the
"Netware Client 32 for DOS" item, then press .

3. Select "OTHER DRIVERS" item from "32-bit Network Board Drivers" menu,
then press .

Company

Exp

Categories

Networks Cards

Model

Exp ThinLan 110

Description

Drivers

Operating System

Windows 3.x-95-98-NT3.51 or higher

Version

4.0A

Size Driver

413KB

File Name

tl110.exe

Observations

32-bit CardBus 10/100 Ethernet NDIS2 Drivers
Installation for LANtastic 6.0
================================================

In this driver release, the NDIS2 drivers are provided for
the Lantastic 6.0 installation.

The NDIS2 driver CB8139.DOS, is located in subdirectory \NDIS
And it's used for Lantastic for DOS and Windows installation

DRIVER LOCATION : \NDIS\CB8139.DOS

The information covers the following two topics:

* Installing NDIS2 driver for Lantastic 6.0 for Windows 3.1x
* Installing NDIS2 driver for Lantastic 6.0 for DOS

Please also refer to the \NDIS\README.TXT file for the
optional keywords defined for CB8139.DOS and to be specified
in PROTOCOL.INI.

================================================================

32-bit CardBus 10/100 Ethernet NDIS2 Drivers
Installation for Banyan VINES v5.x
================================================

In this driver release, the NDIS2 drivers are provided for
the Banyan VINES installation.

The NDIS2 driver, CB8139.DOS, is located in subdirectory
\NDIS and it follows Microsoft's NDIS specification version
2.0.1.

DRIVER LOCATION : \NDIS\CB8139.DOS

Please also refer to the \NDIS\README.TXT file for the
optional keywords defined for CB8139.DOS and to be specified
in PROTOCOL.INI.

For more information about setting up the networking system
driver, please see your Banyan VINES for DOS workstation
documentation.

================================================================

32-bit CardBus 10/100 Ethernet NDIS2 Drivers
Installation for Microsoft LAN Manager 2.x for DOS
====================================================

The 32-bit CradBus 10/100 Ethernet driver files for MS LAN
Manager contained in this directory are as follows:

DRIVER LOCATION : DRIVERS\ETHERNET\CB8139\CB8139.DOS
DRIVERS\ETHERNET\CB8139\PROTOCOL.INI
DRIVERS\NIF\CB8139.NIF

For more information about setting up the networking system
and the driver, please see you MS LAN Manager Installation
and Configuration Guide.

Please also refer to the \NDIS\README.TXT file for the
optional keywords defined for CB8139.DOS and to be specified
in PROTOCOL.INI.

Company

Exp

Categories

Networks Cards

Model

Exp ThinLan 110

Description

New version

Operating System

Windows 3.x-95-98-NT3.51 or higher-NT4-2000

Version

4.1

Size Driver

531KB

File Name

lanv41.exe

Observations

[1]. Diskette Contents
[2]. Installation for DOS ODI Driver
[3]. Installation for CLIENT32 Driver
[4]. Installation for DOS Packet Driver
[5]. Installation for Microsoft Windows 95/98
[6]. Installation for Microsoft Windows NT 3.51
[7]. Installation for Microsoft Windows NT 4.0
[8]. Installation for Linux Series
[9]. Installation for NDIS2 Driver
[10]. Copyrights, Trademarks, and Disclaimers
[1] Diskette Contents

Files Contents
------------------------------------------------------------------
\README.TXT This File
\ENABLER DOS PCMCIA Enable Program
\ODI Novell Netware DOS ODI Driver
\PKTDRV FTP Compliant Packet Driver
\WIN95 NDIS Driver for Windows 95
\WIN98 NDIS Driver for Windows 98
\WNT351 NDIS Driver for Windows NT 3.51
\WNT40 NDIS Driver for Windows NT 4.0
\Manual\Manual.HTM Manual Document
[2]. Installation for DOS ODI Driver

1. For those who installed EMM386.EXE in your config.sys, please exclude
memory address D400-D7FF from your system. PCMCIA Ethernet card enabler
program will use this space to read Ethernet ID and CIS from on-board
flash memory.
[Example]
DEVICE=EMM386.EXE NOEMS X=D400-D7FF
or
DEVICE=EMM386.EXE NOEMS X=D000-DFFF

2. User need to add "LASTDRIVE=[Device Name]" in the Config.sys file,
then reboot Notebook. Example, if you want to login to Device "N",
the string is "LASTDRIVE=M".

3. Enable the FastEthernet PC Card
The EN100.EXE is a PCMCIA controller enabling program. This enable
program only need for DOS and Windows 3.1 system. You don't need
installed the Socket and Card service in your Notebook before
executing the enabler.
In DOS command, go to "\ODI", then type "EN100 [/IRQ:x][/IOP:xxx]"
* IRQ - system interrupt number required for the FastEthernet card.
* IOP - card's I/O port address assignment in HEX format.
The default syntax is "EN100 /IRQ:5 /IOP:300".

4. Getting Started the Novell DOS ODI Driver:
This directory "\ODI" contains FastEthernet DOS ODI driver.
You need the following files to install DOS ODI DRIVER.
a. LSL.COM: supplied by Novell
b. PCM100.COM: DOS ODI driver, supplied by card manufacturer
c. IPXODI.COM: supplied by Novell
d. NETX.EXE: supplied by Novell
e. NET.CFG: optional configuration file

Type "STARTNET" at the DOS prompt will execute the files above,
then you can login to the file server.

[3]. Installation for CLIENT32 Driver
1. If you have completed installed the Netware Client 32 for DOS, all
you have to do is to modify STARTNET.BAT. Please see the sample
STARTNET.BAT above. If not, Please follow the next step 2 - step 7.

2. Run INSTALL.EXE from Netware Client 32 for DOS diskette 1 (or from
Netware 4.11 CD). When the product manual appears, mark the
"Netware Client 32 for DOS" item, then press .

Access to Official Website Exp

Sorry, Exp Official Website has disappeared!

Welcome to the HelpDrivers, driver for printers.

Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more

You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.

Do not rename the file you're downloading, it may cause installation problems.