Available 1 files for Encore ESP816-TB-PCSU

Company

Encore

Categories

Networks Cards

Model

Encore ESP816-TB-PCSU

Description

Drivers

Operating System

Windows 95-98-98Se-Me-NT4-2000-XP

Size Driver

869KB

File Name

esp816-tb-pc.zip

Observations

1. DISKETTE CONTENTS
2. CLIENT DRIVER
3. SOCKET and CARD SERVICES INSTALLATION ADVISORY
4. DIAGNOSTIC PROGRAM
5. NETWARE DOS ODI DRIVER
6. PACKET DRIVER
7. NDIS 3.1 DRIVER FOR WINDOWS 95/98/98_ME/2000/XP
8. NDIS DRIVER FOR WINDOWS NT 4.0
9. SystemSoft CardSoft V3.11

[1] DISKETTE CONTENTS
Files and
Subdirectories Contents
--------------------------------------------------------------------
\ENABLE.EXE PCMCIA Client Driver
\CARDTEST.EXE PCMCIA Card Diagnostic Program
\README.TXT This file
\ODI Novell Netware DOS ODI Driver
\PKTDRV FTP Compliant Packet Driver
\WIN95 NDIS 3 Driver for Windows 95
\WIN98 NDIS 4 Driver for Windows 98
\WIN98_ME NDIS 4 Driver for Windows 98
\WIN2000 NDIS 4 Driver for Windows 2000
\WINXP NDIS 5 Driver for Windows XP
\WINNT40 NDIS 4 Driver for Windows NT 4.0
\Manual Manual Document
[2] CLIENT DRIVER (For DOS and Windows 3.1 Only)

The CLIENT DRIVER is a PCMCIA controller enable program. This enable
program only need for DOS and Windows 3.1 system. You should installed
the Socket and Card service in your Notebook before executing the
client driver.If you do not have the Socket or card service program,
please call the Notebook vendor.The client driver will keep resident for
handle card inseration and removal events. This feature can prevent
system crash when remove the card from socket.
To load the client driver, type

ENABLE [/INT=x][/PORT=xxx][/MEM=xxxx][/U][/?]

in DOS command line, or

DEVICE=[PATHNAME]ENABLE.EXE [/INT=x][/PORT=xxx][/MEM=xxxx][/U][/?]

in config.sys file.

where:

[/INT=x] This specifies the hardware interrupt (IRQ) where your
card will be indicated.
The valid IRQs are 2,3,4,5,6,10,11,12,15.

[/PORT=xxx] This specifies the I/O address. The valid ports are 240,
280,300,320,340,360.

[/MEM=xxxx] This specifies the memory window address. The valid
MEMs are D000, D400, D800, DC00.

[/U] This specifies the client driver will free the resident
program when the card is remove from socket.

[/?] This specifies to indicate the program to display all
the possible syntax only.