Available 4 files for Emulex LP7000E
Select Files
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for IBM
Model
Emulex LP7000E
Description
Manual
Information
Windows 2000-2003
Operating System
Manual
Version
2.22a8 32-Bit
Size Driver
1.8MB
File Name
set_w2k.pdf
Observations
Qualification: 32-bit FC Port driver is Microsoft WHQL qualified for Windows Server 2003 and Windows 2000 Server.
For Windows 2000 drivers, Service Pack 4 is required for cluster configurations.
Windows Server 2003 SP1 Upgrade Notice
New versions are available for all Emulex drivers that include support for Windows Server 2003 SP1. We recommend that you upgrade to one of these new drivers. In most cases, older drivers can be configured to work with SP1 by running the HBA API-SP1 Migration program prior to installing SP1
SP1/R2 Boot Failure with FC Port 2.22a8
Windows Server 2003 will not boot after an installation of SP1 or R2 with FC Port 2.22a8. The only way to boot SP1 is to disconnect the Fibre Channel cables. If you are using FC Port 2.22a8, you should update to an SP1-supported Emulex driver prior to installing SP1. Confirm with your Emulex HBA service provider as to which Emulex driver versions have been qualified for use with SP1 and their products. If you have installed SP1 with FC Port driver version 2.22a8, see Solution ID: 17931 for help on how to recover your system.
Installation, Configuration and Troubleshooting
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for IBM
Model
Emulex LP7000E
Description
Manual
Information
Windows 2000-2003
Operating System
Manual
Version
2.22a8 64-Bit
Size Driver
1.9MB
File Name
set_ws3.pdf
Observations
Qualification: 64-bit FC Port driver is Microsoft WHQL qualified for Windows Server 2003.
Windows Server 2003 SP1 Upgrade Notice
New versions are available for all Emulex drivers that include support for Windows Server 2003 SP1. We recommend that you upgrade to one of these new drivers. In most cases, older drivers can be configured to work with SP1 by running the HBA API-SP1 Migration program prior to installing SP1
SP1/R2 Boot Failure with FC Port 2.22a8
Windows Server 2003 will not boot after an installation of SP1 or R2 with FC Port 2.22a8. The only way to boot SP1 is to disconnect the Fibre Channel cables. If you are using FC Port 2.22a8, you should update to an SP1-supported Emulex driver prior to installing SP1. Confirm with your Emulex HBA service provider as to which Emulex driver versions have been qualified for use with SP1 and their products. If you have installed SP1 with FC Port driver version 2.22a8, see Solution ID: 17931 for help on how to recover your system.
Installation, Configuration and Troubleshooting
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for IBM
Model
Emulex LP7000E
Description
Driver Kit 32-bit
Operating System
Windows 2000-2003
Version
2.22a8 32-Bit
Size Driver
5.4MB
File Name
port-5-2.22a8-3a.zip
Observations
Qualification: 32-bit FC Port driver is Microsoft WHQL qualified for Windows Server 2003 and Windows 2000 Server.
For Windows 2000 drivers, Service Pack 4 is required for cluster configurations.
Windows Server 2003 SP1 Upgrade Notice
New versions are available for all Emulex drivers that include support for Windows Server 2003 SP1. We recommend that you upgrade to one of these new drivers. In most cases, older drivers can be configured to work with SP1 by running the HBA API-SP1 Migration program prior to installing SP1
SP1/R2 Boot Failure with FC Port 2.22a8
Windows Server 2003 will not boot after an installation of SP1 or R2 with FC Port 2.22a8. The only way to boot SP1 is to disconnect the Fibre Channel cables. If you are using FC Port 2.22a8, you should update to an SP1-supported Emulex driver prior to installing SP1. Confirm with your Emulex HBA service provider as to which Emulex driver versions have been qualified for use with SP1 and their products. If you have installed SP1 with FC Port driver version 2.22a8, see Solution ID: 17931 for help on how to recover your system.
Base driver, HBAnyware utility 2.0a13 and elxcfg version 1.41a14
This kit contains the following components:
sli222a8win2ks.zip - Emulex Fibre Channel Multi-protocol Port Driver
EmlxApps300a7.zip - Emulex Applications kit
Readme.first.txt - this file
The detailed contents for each of these components can be found in
the readme files included in each individual kit. The specific minimum
system requirements for each of these kits can be found in the same files.
It is important that the components of this kit be installed in the
appropriate order:
1) The driver kit must be installed first, followed by the applications
kit. Instructions for installing the driver kit can be found in the
readme.txt file included in the sli222a8win2ks.zip package.
2) Once the driver has been successfully installed, then the applications
kit must be installed. Instructions for installing the applications
kit can be found in the readme.doc file contained in the
EmlxApps300a7.zip package.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for IBM
Model
Emulex LP7000E
Description
Driver Kit
Operating System
Windows 2000-2003
Version
2.22a8 64-Bit
Size Driver
6.3MB
File Name
port-6-2.22a8-3b.zip
Observations
Qualification: 64-bit FC Port driver is Microsoft WHQL qualified for Windows Server 2003.
Windows Server 2003 SP1 Upgrade Notice
New versions are available for all Emulex drivers that include support for Windows Server 2003 SP1. We recommend that you upgrade to one of these new drivers. In most cases, older drivers can be configured to work with SP1 by running the HBA API-SP1 Migration program prior to installing SP1.
SP1/R2 Boot Failure with FC Port 2.22a8
Windows Server 2003 will not boot after an installation of SP1 or R2 with FC Port 2.22a8. The only way to boot SP1 is to disconnect the Fibre Channel cables. If you are using FC Port 2.22a8, you should update to an SP1-supported Emulex driver prior to installing SP1. Confirm with your Emulex HBA service provider as to which Emulex driver versions have been qualified for use with SP1 and their products. If you have installed SP1 with FC Port driver version 2.22a8
Base driver, HBAnyware utility 2.0a13 and elxcfg version 1.41a14
This kit contains the following components:
sli222a8ia64c.zip - Emulex Fibre Channel Multi-protocol Port Driver
Emlx64Apps300a7.zip - Emulex Applications kit
Readme.first.txt - this file
The detailed contents for each of these components can be found in
the readme files included in each individual kit. The specific minimum
system requirements for each of these kits can be found in the same files.
It is important that the components of this kit be installed in the
appropriate order:
1) The driver kit must be installed first, followed by the applications
kit. Instructions for installing the driver kit can be found in the
readme.txt file included in the sli222a8ia64c.zip package.
2) Once the driver has been successfully installed, then the applications
kit must be installed. Instructions for installing the applications
kit can be found in the readme.doc file contained in the
Emlx64Apps300a7.zip package.
Access to Official Website Emulex
Welcome to the HelpDrivers, driver for printers.
Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more
You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.
Do not rename the file you're downloading, it may cause installation problems.