Available 84 files for Emulex LP9000
Select Files
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
Driver Kit
Operating System
Linux 2.6 Kernel
Version
8.2.0.22
Size Driver
274KB
File Name
lpfc_2.6_driver_kit-8.2.0.22-2.tar.gz
Observations
Red Hat Enterprise Linux 5.0 and later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
SUSE Linux Enterprise Server 10 SP1 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Oracle Enterprise Linux 5 or later (x86 and x64 architectures)
Base driver and install script (273 KB gz file)
1. System Requirements
1.1 Red Hat Enterprise Linux 'kernel-devel' Package Requirement
1.2 SuSE Linux Enterprise Server 'kernel-source' Package Requirement
2. Description of Install Procedure
3. Known Issues
3.1 PCI Hot Plug Support for applications
3.1.1 Observed problem
3.1.2 Workaround
3.2 Deletion of Vports/PCI Hot Unplug
3.2.1 Observed Problem
3.2.2 Background
3.3 lspci utility displays "Unknown Device" for LPe12000 HBAs
3.3.1 Observed Problem
3.3.2 Background
3.4 Speed of LPe12000 HBA (8Gb) is incorrectly displayed by HBAnyware
3.4.1 Observed Problem
3.4.2 Background
3.5 Port disabled on system boot or HBA reset with authentication enabled
3.5.1 Observed Problem
3.5.2 Workaround
3.6 LILO Boot Loader is not supported - i386 and x86_64 architectures
3.6.1 Observed Problem
3.6.2 Background
3.7 Order of lpfc module in initrd module list
3.7.1 Observed Problem
3.7.2 Workaround
3.8 Devloss timeout after swapping ports
3.8.1 Observed Problem
3.8.2 Workaround
----------------------------------------------------------------------
1. System Requirements
The following distributions of Linux are supported by the Emulex
LPFC driver:
Red Hat Enterprise Linux 5
SuSE Linux Enterprise Server 10 (SP1 or higher)
1.1 Red Hat Enterprise Linux 'kernel-devel' Package Requirement
For Red Hat Enterprise Linux installations, the -devel package
which matches the kernel package with the same version as the
currently running kernel must be installed for the LPFC driver
build to succeed. For example, a system with the 2.6.18-7 kernel
would need the kernel-devel-2.6.18-7 package.
1.2 SuSE Linux Enterprise Server 'kernel-source' Package Requirement
For SuSE Linux Enterprise Server installations, the kernel-source
package with the same version as the currently running kernel must
be installed for the LPFC driver build to succeed. For example, a
system with the 2.6.16.46-0.7-bigsmp kernel would need the
kernel-source-2.6.16.46-0.7 package.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
SMI-S Provider Kit 9 (x86)
Operating System
Linux 2.6 Kernel
Version
8.0.16.27
Size Driver
12.6MB
File Name
elxsmiprovider-sles9-i386-1.1.6-2.tar.gz
Observations
SUSE Linux Enterprise Server 9 Service Pack 2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Red Hat Enterprise Linux 4 Update 2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Oracle Enterprise Linux 4 Update 4 or later (x86 and x64 architectures)
Asianux 2.0 SP2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
SUSE Linux Enterprise Server 9 (x86)
RELEASE NOTES for Emulex SMI-S HBA Provider
Version 1.1.6
SECTION 1. Introduction
SECTION 2. System Prerequisites
SECTION 3. Supported and Tested Operating Systems
SECTION 4. Installation
SECTION 5. Directory Structure
SECTION 6. HBAnyware WebLaunch Integration (Optional)
SECTION 7. Known Limitations
SECTION 8. Frequently Asked Questions
SECTION 1. Introduction
The Emulex SMI HBA Provider is integrated/bundled with OpenPegasus Common
Information Model Object Manager (CIMOM) as a pre-packaged, ready to deploy
SMI-S agent. This package incorporates version 2.5.1 of the OpenPegasus
CIMOM ("http://www.openpegasus.org").
This release supports the FC HBA profile, Server profile and a partial
implementation of the Host Discovered Resources (HDR) profile. The Emulex
SMI-S HBA Provider is certified by SNIA Conformance Testing Program (CTP)
v1.1.0.85, and it is fully compliant with SMI-S v1.1.0.
SLP (Service Location Protocol) and OpenSSL are included with the Emulex
SMI-S HBA Provider kit on Windows and are installed by default if not
already present. See Section 2 for Linux specific details.
For security purposes, you might want to replace the sample certificates
(privkey.cert and elxhba.cert) with your own signed certificates.
NOTE: The included OpenSSL library was built to exclude support for the IDEA,
MDC2 and RC5 encryption algorithms.
License agreements for these Open Source components and the Emulex software
are found in the ancillary.txt file.
The Emulex SMI-S HBA Provider is registered under the namespace: root/emulex.
Members of the local group "Administrators" have full access to the CIM
server by default on Windows.
On Linux, the default user account is:
User Name: root
Password: pwd580
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
SMI-S Provider Kit RHEL 4
Operating System
Linux 2.6 Kernel
Version
8.0.16.17
Size Driver
10.9MB
File Name
elxsmiproviderrhel3_4-1.0.12-1.tar.gz
Observations
Support Resources for PRIMEQUEST Servers
SLES9 SP3 (2.6.5-7.244)
SMI-S HBA Provider, compliant with the SMI-S 1.0.2 specification and certified against the SNIA-CTP v1.0.2.23 suite
Pre-packaged with OpenPegasus CIMOM v2.3.2, as a turnkey SMI-S agent for ease of installation and deployment
RELEASE NOTES for Emulex SMI-S HBA Provider
Version 1.0.12
SECTION 1. Introduction
SECTION 2. System Prerequisites
SECTION 3. Supported and Tested Operating Systems
SECTION 4. Installation
SECTION 5. Directory Structure
SECTION 6. Known Limitations
SECTION 7. Frequently Asked Questions
SECTION 1. Introduction
The Emulex SMI HBA Provider is integrated/bundled with OpenPegasus Common
Information Model Object Manager (CIMOM) as a pre-packaged, ready to deploy
SMI-S agent. This package incorporates version 2.3.2 of the OpenPegasus
CIMOM ("http://www.openpegasus.org").
This release supports the FC HBA profile, Server profile and a partial
implementation of the Host Discovered Resources (HDR) profile. The Emulex
SMI-S HBA Provider is certified by SNIA Conformance Testing Program (CTP)
v1.0.2.23, and it is fully compliant with SMI-S v1.0.2.
SLPD (Service Location Protocol) is included with the Emulex SMI-S HBA Provider
kit and run by default if the system does not have one. For security purposes,
you might want to replace the sample certificates (privkey.cert and elxhba.cert)
with your own signed certificates.
Please refer to "http://www.openssl.org/docs/HOWTO/" for more details on how
to create a certificate.
NOTE: The OpenSSL library was built to exclude support for the IDEA, MDC2
and RC5 encryption algorithms.
License agreements for these Open Source components and the Emulex software
are found in the ancillary.txt file.
The Emulex SMI-S HBA Provider is registered under the namespace: root/emulex.
By default, the following account is created only on Windows:
User Name: cimadmin
Password: pwd580
On Linux, the default user account is:
User Name: root
Password: pwd580
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
SMI-S Provider Kit SLES 9.0
Operating System
Linux 2.6 Kernel
Version
8.0.16.17
Size Driver
11MB
File Name
elxsmiprovidersles9-1.0.12-1.tar.gz
Observations
SUSE Linux Enterprise Server 9 Service Pack 1 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Red Hat Enterprise Linux 4 Update 1 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
SMI-S HBA Provider, compliant with the SMI-S 1.0.2 specification and certified against the SNIA-CTP v1.0.2.23 suite
Pre-packaged with OpenPegasus CIMOM v2.3.2, as a turnkey SMI-S agent for ease of installation and deployment
RELEASE NOTES for Emulex SMI-S HBA Provider
Version 1.0.12
SECTION 1. Introduction
SECTION 2. System Prerequisites
SECTION 3. Supported and Tested Operating Systems
SECTION 4. Installation
SECTION 5. Directory Structure
SECTION 6. Known Limitations
SECTION 7. Frequently Asked Questions
SECTION 1. Introduction
The Emulex SMI HBA Provider is integrated/bundled with OpenPegasus Common
Information Model Object Manager (CIMOM) as a pre-packaged, ready to deploy
SMI-S agent. This package incorporates version 2.3.2 of the OpenPegasus
CIMOM ("http://www.openpegasus.org").
This release supports the FC HBA profile, Server profile and a partial
implementation of the Host Discovered Resources (HDR) profile. The Emulex
SMI-S HBA Provider is certified by SNIA Conformance Testing Program (CTP)
v1.0.2.23, and it is fully compliant with SMI-S v1.0.2.
SLPD (Service Location Protocol) is included with the Emulex SMI-S HBA Provider
kit and run by default if the system does not have one. For security purposes,
you might want to replace the sample certificates (privkey.cert and elxhba.cert)
with your own signed certificates.
Please refer to "http://www.openssl.org/docs/HOWTO/" for more details on how
to create a certificate.
NOTE: The OpenSSL library was built to exclude support for the IDEA, MDC2
and RC5 encryption algorithms.
License agreements for these Open Source components and the Emulex software
are found in the ancillary.txt file.
The Emulex SMI-S HBA Provider is registered under the namespace: root/emulex.
By default, the following account is created only on Windows:
User Name: cimadmin
Password: pwd580
On Linux, the default user account is:
User Name: root
Password: pwd580
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
SMI-S Provider Kit 4 (ia64)
Operating System
Linux 2.6 Kernel
Version
8.0.16.27
Size Driver
14.9MB
File Name
elxsmiprovider-rhel4-ia64-1.1.6-2.tar.gz
Observations
SUSE Linux Enterprise Server 9 Service Pack 2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Red Hat Enterprise Linux 4 Update 2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Oracle Enterprise Linux 4 Update 4 or later (x86 and x64 architectures)
Asianux 2.0 SP2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Red Hat Enterprise Linux 4 and Oracle Enterprise Linux 4 (ia64)
RELEASE NOTES for Emulex SMI-S HBA Provider
Version 1.1.6
SECTION 1. Introduction
SECTION 2. System Prerequisites
SECTION 3. Supported and Tested Operating Systems
SECTION 4. Installation
SECTION 5. Directory Structure
SECTION 6. HBAnyware WebLaunch Integration (Optional)
SECTION 7. Known Limitations
SECTION 8. Frequently Asked Questions
SECTION 1. Introduction
The Emulex SMI HBA Provider is integrated/bundled with OpenPegasus Common
Information Model Object Manager (CIMOM) as a pre-packaged, ready to deploy
SMI-S agent. This package incorporates version 2.5.1 of the OpenPegasus
CIMOM ("http://www.openpegasus.org").
This release supports the FC HBA profile, Server profile and a partial
implementation of the Host Discovered Resources (HDR) profile. The Emulex
SMI-S HBA Provider is certified by SNIA Conformance Testing Program (CTP)
v1.1.0.85, and it is fully compliant with SMI-S v1.1.0.
SLP (Service Location Protocol) and OpenSSL are included with the Emulex
SMI-S HBA Provider kit on Windows and are installed by default if not
already present. See Section 2 for Linux specific details.
For security purposes, you might want to replace the sample certificates
(privkey.cert and elxhba.cert) with your own signed certificates.
NOTE: The included OpenSSL library was built to exclude support for the IDEA,
MDC2 and RC5 encryption algorithms.
License agreements for these Open Source components and the Emulex software
are found in the ancillary.txt file.
The Emulex SMI-S HBA Provider is registered under the namespace: root/emulex.
Members of the local group "Administrators" have full access to the CIM
server by default on Windows.
On Linux, the default user account is:
User Name: root
Password: pwd580
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
SMI-S Provider Kit 4 (x86)
Operating System
Linux 2.6 Kernel
Version
8.0.16.27
Size Driver
12.4MB
File Name
elxsmiprovider-rhel4-i386-1.1.6-2.tar.gz
Observations
SUSE Linux Enterprise Server 9 Service Pack 2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Red Hat Enterprise Linux 4 Update 2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Oracle Enterprise Linux 4 Update 4 or later (x86 and x64 architectures)
Asianux 2.0 SP2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Red Hat Enterprise Linux 4 and Oracle Enterprise Linux 4 (x86)
RELEASE NOTES for Emulex SMI-S HBA Provider
Version 1.1.6
SECTION 1. Introduction
SECTION 2. System Prerequisites
SECTION 3. Supported and Tested Operating Systems
SECTION 4. Installation
SECTION 5. Directory Structure
SECTION 6. HBAnyware WebLaunch Integration (Optional)
SECTION 7. Known Limitations
SECTION 8. Frequently Asked Questions
SECTION 1. Introduction
The Emulex SMI HBA Provider is integrated/bundled with OpenPegasus Common
Information Model Object Manager (CIMOM) as a pre-packaged, ready to deploy
SMI-S agent. This package incorporates version 2.5.1 of the OpenPegasus
CIMOM ("http://www.openpegasus.org").
This release supports the FC HBA profile, Server profile and a partial
implementation of the Host Discovered Resources (HDR) profile. The Emulex
SMI-S HBA Provider is certified by SNIA Conformance Testing Program (CTP)
v1.1.0.85, and it is fully compliant with SMI-S v1.1.0.
SLP (Service Location Protocol) and OpenSSL are included with the Emulex
SMI-S HBA Provider kit on Windows and are installed by default if not
already present. See Section 2 for Linux specific details.
For security purposes, you might want to replace the sample certificates
(privkey.cert and elxhba.cert) with your own signed certificates.
NOTE: The included OpenSSL library was built to exclude support for the IDEA,
MDC2 and RC5 encryption algorithms.
License agreements for these Open Source components and the Emulex software
are found in the ancillary.txt file.
The Emulex SMI-S HBA Provider is registered under the namespace: root/emulex.
Members of the local group "Administrators" have full access to the CIM
server by default on Windows.
On Linux, the default user account is:
User Name: root
Password: pwd580
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
SMI-S Provider Kit 9 (ia64)
Operating System
Linux 2.6 Kernel
Version
8.0.16.27
Size Driver
13.9MB
File Name
elxsmiprovider-sles9-ia64-1.1.6-2.tar.gz
Observations
SUSE Linux Enterprise Server 9 Service Pack 2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Red Hat Enterprise Linux 4 Update 2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Oracle Enterprise Linux 4 Update 4 or later (x86 and x64 architectures)
Asianux 2.0 SP2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
SUSE Linux Enterprise Server 9 (ia64)
RELEASE NOTES for Emulex SMI-S HBA Provider
Version 1.1.6
SECTION 1. Introduction
SECTION 2. System Prerequisites
SECTION 3. Supported and Tested Operating Systems
SECTION 4. Installation
SECTION 5. Directory Structure
SECTION 6. HBAnyware WebLaunch Integration (Optional)
SECTION 7. Known Limitations
SECTION 8. Frequently Asked Questions
SECTION 1. Introduction
The Emulex SMI HBA Provider is integrated/bundled with OpenPegasus Common
Information Model Object Manager (CIMOM) as a pre-packaged, ready to deploy
SMI-S agent. This package incorporates version 2.5.1 of the OpenPegasus
CIMOM ("http://www.openpegasus.org").
This release supports the FC HBA profile, Server profile and a partial
implementation of the Host Discovered Resources (HDR) profile. The Emulex
SMI-S HBA Provider is certified by SNIA Conformance Testing Program (CTP)
v1.1.0.85, and it is fully compliant with SMI-S v1.1.0.
SLP (Service Location Protocol) and OpenSSL are included with the Emulex
SMI-S HBA Provider kit on Windows and are installed by default if not
already present. See Section 2 for Linux specific details.
For security purposes, you might want to replace the sample certificates
(privkey.cert and elxhba.cert) with your own signed certificates.
NOTE: The included OpenSSL library was built to exclude support for the IDEA,
MDC2 and RC5 encryption algorithms.
License agreements for these Open Source components and the Emulex software
are found in the ancillary.txt file.
The Emulex SMI-S HBA Provider is registered under the namespace: root/emulex.
Members of the local group "Administrators" have full access to the CIM
server by default on Windows.
On Linux, the default user account is:
User Name: root
Password: pwd580
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
Driver Kit
Operating System
Linux 2.6 Kernel
Version
8.0.16.32
Size Driver
222KB
File Name
lpfc_2.6_driver_kit-8.0.16.32-1.tar.gz
Observations
SUSE Linux Enterprise Server 9 Service Pack 2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Red Hat Enterprise Linux 4 Update 2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Oracle Enterprise Linux 4 Update 4 or later (x86 and x64 architectures)
Asianux 2.0 SP2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Base driver and install script
1. System Requirements
1.1 Red Hat Enterprise Linux 'kernel-devel' Package Requirement
1.2 SuSE Linux Enterprise Server 'kernel-source' Package Requirement
2. Description of Install Procedure
3. Informational
3.1 Packaging Change Involving The Application Helper Module
3.1.1 Background
3.1.2 Observed Behavior
4. Known Issues
4.1 Uninstalling the Driver Kit on Boot-from-SAN Configurations
4.1.1 Observed problem
4.1.2 Resolution
4.2 Machine Check Exception
4.2.1 Observed problem
4.2.2 Workaround
4.3 Loading order of LPFC driver in initial ramdisk
4.3.1 Background
4.3.2 Observed Problem
4.3.3 Workaround
4.4 System panic while unloading the lpfc module
4.4.1 Background
4.4.2 Observed Problem
4.4.3 Resolution
4.5 PCI Hot Plug Support for applications
4.5.1 Observed problem
4.5.2 Workaround
----------------------------------------------------------------------
1. System Requirements
The following distributions of Linux are supported by the Emulex
LPFC driver:
Red Hat Enterprise Linux 4 (Update 3 or higher)
SuSE Linux Enterprise Server 9 (SP2 or higher)
1.1 Red Hat Enterprise Linux 'kernel-devel' Package Requirement
For Red Hat Enterprise Linux installations, the kernel development
package with the same version as the currently running kernel must
be installed for the LPFC 8.0 driver build to succeed. For
example, a system with the 2.6.9-22.EL kernel would need the
kernel-devel-2.6.9-22.EL package, and a system with the
2.6.9-22.ELsmp kernel would need the kernel-smp-devel-2.6.9-22.EL
package.
1.2 SuSE Linux Enterprise Server 'kernel-source' Package Requirement
For SuSE Linux Enterprise Server installations, the kernel-source
package with the same version as the currently running kernel must
be installed for the LPFC 8.0 driver build to succeed. For
example, a system with the 2.6.5-7.139-bigsmp kernel would need the
kernel-source-2.6.5-7.139 package.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
Driver Kit
Operating System
Linux 2.6 Kernel
Version
8.1.10.12
Size Driver
190KB
File Name
lpfc_2.6_driver_kit-8.1.10.12-1.tar.gz
Observations
Red Hat Enterprise Linux 5.0 and later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
SUSE Linux Enterprise Server 10 SP1 (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Base driver and install script
1. System Requirements
1.1 Red Hat Enterprise Linux 'kernel-devel' Package Requirement
2. Description of Install Procedure
3. Known Issues
3.1 PCI Hot Plug Support for applications
3.1.1 Observed problem
3.1.2 Workaround
----------------------------------------------------------------------
1. System Requirements
The following distributions of Linux are supported by the Emulex
LPFC driver:
Red Hat Enterprise Linux 5
1.1 Red Hat Enterprise Linux 'kernel-devel' Package Requirement
For Red Hat Enterprise Linux installations, the -devel package
which matches the kernel package with the same version as the
currently running kernel must be installed for the LPFC driver
build to succeed. For example, a system with the 2.6.18-7 kernel
would need the kernel-devel-2.6.18-7 package.
2. Description of Install Procedure
The lpfc-install script installs the LPFC driver RPM. This RPM
installs the driver sources to the /usr/src/lpfc directory, builds
the driver for the currently running kernel, and then installs the
driver to the proper directory for the currently running kernel.
Once the RPM is installed, the lpfc-install script creates a new
ramdisk for the currently running kernel so that the 'lpfc' driver
is loaded when the kernel is initialized during system startup.
3. Known Issues
3.1 PCI Hot Plug Support for applications
3.1.1 Observed problem
PCI Hot Plug has been found to cause applications (HBAnyware utilities or
third party applications) that use the Emulex libraries (i.e. HBAAPI), to
misbehave or malfunction.
3.1.2 Workaround
A user should stop all applications that are accessing LPFC's HBAAPI
interface (HBAnyware utilities or third party applications) before
performing PCI Hot Plug of an LPFC HBA.
Use the following command to stop the HBAnyware application:
#/usr/sbin/hbanyware/stop_hbanyware
After performing PCI Hot Plug of the HBA you can restart the applications.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
Driver Kit
Operating System
Linux 2.6 Kernel
Version
8.0.16.17
Size Driver
260KB
File Name
lpfc_2.6_driver_kit-8.0.16.17-2.tar.gz
Observations
SUSE Linux Enterprise Server 9 Service Pack 1 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Red Hat Enterprise Linux 4 Update 1 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Base driver, application helper module and install script
1. System Requirements
2. Description of Changes
3. Release Notes
3.1 Red Hat Enterprise Linux 'kernel-devel' Package Requirement
3.2 SuSE Linux Enterprise Server 'kernel-source' Package Requirement
3.3 Kernel Upgrade
3.4 Changing Target Timeout
3.4.1 Background
3.4.2 Observed Problem
3.4.3 Workaround
3.5 Machine Check Exception
3.5.1 Observed problem
3.5.2 Workaround
----------------------------------------------------------------------
1. System Requirements
The following distributions of Linux are supported by the Emulex
drivers:
Red Hat Enterprise Linux 4
SuSE Linux Enterprise Server 9
2. Description of Install Procedure
The lpfc-install script installs both the LPFC driver and the LPFC
DFC driver RPMs. These RPMs install their driver sources to the
/usr/src/lpfc directory, build their drivers for the currently
running kernel, and then install the drivers to the proper
directory for the currently running kernel.
Once the RPMs are installed, the lpfc-install script creates a new
ramdisk for the currently running kernel so that the 'lpfc' driver
is loaded when the kernel is initialized during system startup.
The 'elxlpfc' init script is also installed and configured to start
and stop the 'lpfcdfc' driver during system startup and shutdown.
3. Release Notes
3.1 Red Hat Enterprise Linux 'kernel-devel' Package Requirement
For Red Hat Enterprise Linux installations, the kernel development
package with the same version as the currently running kernel must
be installed for the LPFC 8.0 driver build to succeed. For
example, a system with the 2.6.9-5.EL kernel would need the
kernel-devel-2.6.9-5.EL package, and a system with the
2.6.9-5.ELsmp kernel would need the kernel-smp-devel-2.6.9-5.EL
package.
3.2 SuSE Linux Enterprise Server 'kernel-source' Package Requirement
For SuSE Linux Enterprise Server installations, the kernel-source
package with the same version as the currently running kernel must
be installed for the LPFC 8.0 driver build to succeed. For
example, a system with the 2.6.5-7.139-bigsmp kernel would need the
kernel-source-2.6.5-7.139 package.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
Driver Kit
Operating System
Linux 2.6 Kernel
Version
8.0.16.27
Size Driver
214KB
File Name
lpfc_2.6_driver_kit-8.0.16.27-1.tar.gz
Observations
SUSE Linux Enterprise Server 9 Service Pack 2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Red Hat Enterprise Linux 4 Update 2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Oracle Enterprise Linux 4 Update 4 or later (x86 and x64 architectures)
Asianux 2.0 SP2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Base driver and install script
1. System Requirements
1.1 Red Hat Enterprise Linux 'kernel-devel' Package Requirement
1.2 SuSE Linux Enterprise Server 'kernel-source' Package Requirement
2. Description of Install Procedure
3. Informational
3.1 Packaging Change Involving The Application Helper Module
3.1.1 Background
3.1.2 Observed Behavior
4. Known Issues
4.1 Uninstalling the Driver Kit on Boot-from-SAN Configurations
4.1.1 Observed problem
4.1.2 Resolution
4.2 Machine Check Exception
4.2.1 Observed problem
4.2.2 Workaround
4.3 Loading order of LPFC driver in initial ramdisk
4.3.1 Background
4.3.2 Observed Problem
4.3.3 Workaround
4.4 System panic while unloading the lpfc module
4.4.1 Background
4.4.2 Observed Problem
4.4.3 Workaround
----------------------------------------------------------------------
1. System Requirements
The following distributions of Linux are supported by the Emulex
LPFC driver:
Red Hat Enterprise Linux 4 (Update 3 or higher)
SuSE Linux Enterprise Server 9 (SP2 or higher)
1.1 Red Hat Enterprise Linux 'kernel-devel' Package Requirement
For Red Hat Enterprise Linux installations, the kernel development
package with the same version as the currently running kernel must
be installed for the LPFC 8.0 driver build to succeed. For
example, a system with the 2.6.9-22.EL kernel would need the
kernel-devel-2.6.9-22.EL package, and a system with the
2.6.9-22.ELsmp kernel would need the kernel-smp-devel-2.6.9-22.EL
package.
1.2 SuSE Linux Enterprise Server 'kernel-source' Package Requirement
For SuSE Linux Enterprise Server installations, the kernel-source
package with the same version as the currently running kernel must
be installed for the LPFC 8.0 driver build to succeed. For
example, a system with the 2.6.5-7.139-bigsmp kernel would need the
kernel-source-2.6.5-7.139 package.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
Applications Kit
Operating System
Linux 2.6 Kernel
Version
8.0.16.32
Size Driver
197.7MB
File Name
elxlinuxapps-3.2a7-8.0.16.32-1-1.tar
Observations
SUSE Linux Enterprise Server 9 Service Pack 2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Red Hat Enterprise Linux 4 Update 2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Oracle Enterprise Linux 4 Update 4 or later (x86 and x64 architectures)
Asianux 2.0 SP2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
HBAnyware 3.2a7 Linux Installation Instructions
This installation kit contains the following components:
HBAnyware version 3.2a7
SSC version 3.2a7
DFC Library version 80.163-11
Lputil version 2.0a14
HBAAPI version 2.1.d
DFC helper module
Dependencies:
lpfc driver version 8.0.16.32 or later
HBAnyware requires that the lpfc driver module be installed.
HBAnyware requires a minimum screen resolution of 1024 x 768.
HBAnyware requires the kernel development environment as described here:
This kit installs the Emulex Application Helper Module for the
currently running kernel. Since this installation procedure builds
the module for the currently running kernel, the kernel development
environment must be installed. For systems running Red Hat Enterprise
Linux (RHEL) 4, the appropriate kernel-devel package is required; for
example, a system with the 2.6.9-22.EL kernel would need the
kernel-devel-2.6.9-22.EL package, and a system with the 2.6.9-22.ELsmp
kernel would need the kernel-smp-devel-2.6.9-22.EL package. For
systems running SuSE Linux Enterprise Server (SLES) 9, the appropriate
kernel-source package is required; for example, a system with the
2.6.5-7.139-bigsmp kernel would need the kernel-source-2.6.5-7.139
package.
A log of each installation and uninstallation is recorded in the
following file:
/usr/src/lpfcdfc/utils-install.log
Installing HBAnyware:
1. Copy the applications kit tar file to a directory on the install machine
2. cd to the directory which you copied the tar file
3. Untar the file: tar -xvf tarfilename
4. cd (change directory) to the "ElxLinuxApps.." directory created by step 3
5. su to root
6. If earlier HBAnyware version currently installed, type : ./uninstall
7. Run the install script: ./install
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
Applications Kit
Operating System
Linux 2.6 Kernel
Version
8.0.16.34
Size Driver
187.9MB
File Name
elxlinuxapps-3.3a20-8.0.16.34-1-1.tar
Observations
SUSE Linux Enterprise Server 9 Service Pack 2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Red Hat Enterprise Linux 4 Update 2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Oracle Enterprise Linux 4 Update 4 or later (x86 and x64 architectures)
Asianux 2.0 SP2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
HBAnyware 3.3a20 Linux Installation Instructions
This installation kit contains the following components:
HBAnyware version 3.3a20
SSC version 3.3a20
DFC Library version 80.164-2
Lputil version 2.0a14
HBAAPI version 2.1.d_1
Dependencies:
lpfc driver version 8.0.16.34 or later
HBAnyware requires that the lpfc driver module be installed.
HBAnyware requires a minimum screen resolution of 1024 x 768.
Installing HBAnyware:
1. Copy the applications kit tar file to a directory on the install machine
2. cd to the directory which you copied the tar file
3. Untar the file: tar -xvf tarfilename
4. cd (change directory) to the "ElxLinuxApps.." directory created by step 3
5. su to root
6. If earlier HBAnyware version currently installed, type : ./uninstall
7. Run the install script: ./install
8. When prompted, answer the following question:
Select desired mode of operation for HBAnyware
1 Local Mode : HBA's on this Platform can be managed by HBAnyware
clients on this platform only.
2 Managed Mode : HBA's on this Platform can be managed by local or
remote HBAnyware clients
3 Remote Mode : Same as '2' plus HBAnyware clients on this Platform
can manage local and remote clients.
Enter the number '1' or '2' or '3'
9. When prompted, answer the following question:
Do you want to allow user to make subsequent management mode changes
using 'set_operating_mode' script
Enter the letter 'Y' for yes or 'N' for no
10. Installation Complete: type /usr/sbin/hbanyware/hbanyware
to start GUI or type /usr/sbin/hbanyware/hbacmd list
to run script utility
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
Applications Kit
Operating System
Linux 2.6 Kernel
Version
8.1.10.12
Size Driver
207.2MB
File Name
elxlinuxapps-3.2a16-8.1.10.12-1-2.tar
Observations
Red Hat Enterprise Linux 5.0 and later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
SUSE Linux Enterprise Server 10 SP1 (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
HBAnyware utility 3.2a16, lputil 2.0a14
HBAnyware 3.2a16 Linux Installation Instructions
This installation kit contains the following components:
HBAnyware version 3.2a16
SSC version 3.2a16
DFC Library version 2.15.1007-1-1
Lputil version 2.0a14
HBAAPI version 2.1.e
Dependencies:
lpfc driver version 8.1.10.12 or later
HBAnyware requires that the lpfc driver module be installed.
HBAnyware requires a minimum screen resolution of 1024 x 768.
Installing HBAnyware:
1. Copy the applications kit tar file to a directory on the install machine
2. cd to the directory which you copied the tar file
3. Untar the file: tar -xvf tarfilename
4. cd (change directory) to the "ElxLinuxApps.." directory created by step 3
5. su to root
6. If earlier HBAnyware version currently installed, type : ./uninstall
7. Run the install script: ./install
8. When prompted, answer the following question:
Select desired mode of operation for HBAnyware
1 Local Mode : HBA's on this Platform can be managed by HBAnyware
clients on this platform only.
2 Managed Mode : HBA's on this Platform can be managed by local or
remote HBAnyware clients
3 Remote Mode : Same as '2' plus HBAnyware clients on this Platform
can manage local and remote clients.
Enter the number '1' or '2' or '3'
9. When prompted, answer the following question:
Do you want to allow user to make subsequent management mode changes
using 'set_operating_mode' script
Enter the letter 'Y' for yes or 'N' for no
10. Installation Complete: type /usr/sbin/hbanyware/hbanyware
to start GUI or type /usr/sbin/hbanyware/hbacmd list
to run script utility
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
Applications Kit
Operating System
Linux 2.6 Kernel
Version
8.2.0.22
Size Driver
198.5MB
File Name
elxlinuxapps-3.4a14-8.2.0.22-2-2.tar
Observations
Red Hat Enterprise Linux 5.0 and later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
SUSE Linux Enterprise Server 10 SP1 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Oracle Enterprise Linux 5 or later (x86 and x64 architectures)
HBAnyware utility 3.4a14 (198 MB tar file)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
Application helper module
Operating System
Linux 2.6 Kernel
Version
8.0.16.17
Size Driver
202KB
File Name
lpfc_2.6_ioctl_module_kit-2.0.9-2.tar.gz
Observations
SUSE Linux Enterprise Server 9 Service Pack 1 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Red Hat Enterprise Linux 4 Update 1 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Use this file only with the RHEL 4 Update 2 or SLES9 SP3 distributions, which contain the 8.0.16.17 driver -- do not use with the driver kit above
1. System Requirements
2. Description of Changes
3. Release Notes
3.1 Red Hat Enterprise Linux 'kernel-devel' Package Requirement
3.2 SuSE Linux Enterprise Server 'kernel-source' Package Requirement
----------------------------------------------------------------------
1. System Requirements
The following distributions of Linux are supported by the Emulex
LPFC Application Helper Module:
Red Hat Enterprise Linux 4 Update 1
SuSE Linux Enterprise Server 9 SP2
2. Description of Changes
The ioctl-install script installs the LPFC Application Helper
Module RPM. This RPM installs the module sources to the
/usr/src/lpfcdfc directory, builds the module for the currently
running kernel, and then installs the module to the proper
directory for the currently running kernel.
Once the RPM is installed, the 'elxlpfc' init script is installed
and configured to start and stop the 'lpfcdfc' driver during system
startup and shutdown.
3. Release Notes
3.1 Red Hat Enterprise Linux 'kernel-devel' Package Requirement
For Red Hat Enterprise Linux installations, the kernel development
package with the same version as the currently running kernel must
be installed for the Application Helper Module build to succeed.
For example, a system with the 2.6.9-6.37.EL kernel would need the
kernel-devel-2.6.9-6.37.EL package, and a system with the
2.6.9-6.37.ELsmp kernel would need the
kernel-smp-devel-2.6.9-6.37.EL package.
3.2 SuSE Linux Enterprise Server 'kernel-source' Package Requirement
For SuSE Linux Enterprise Server installations, the kernel-source
package with the same version as the currently running kernel must
be installed for the Application Helper Module build to succeed.
For example, a system with the 2.6.5-7.166-bigsmp kernel would need
the kernel-source-2.6.5-7.166 package.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
Applications Kit
Operating System
Linux 2.6 Kernel
Version
8.0.16.17
Size Driver
165.4MB
File Name
elxlinuxapps-2.1a25-8.0.16.17-1-1.tar
Observations
SUSE Linux Enterprise Server 9 Service Pack 1 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Red Hat Enterprise Linux 4 Update 1 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
HBAnyware utility 2.1a25, lputil 2.0a9 (169 MB tar file)
HBAnyware 2.1a25 Linux Installation Instructions
This installation kit contains the following components:
HBAnyware version 2.1a25
SSC version 2.1a25
DFC Library version 80.161-5
Lputil version 2.0a9
HBAAPI version 2.1.a
Dependencies:
lpfc driver version 8.0.16.17 or later
HBAnyware is dependant on lpfc being installed, so install lpfc first if it is not already installed.
HBAnyware requires a minimum screen resolution of 1024 x 768.
Installing HBAnyware
1. Copy the applications kit tar file to a directory on the install machine
2. cd to the directory which you copied the tar file
3. Untar the file: tar -xvf tarfilename
4. su to root
5. Run the install script: ./install
Uninstalling HBAnyware
1. Complete steps 1 through 4 from "Installing HBAnyware" above.
2. Run the uninstall script: ./uninstall
Running the HBAnyware GUI
1. su to root
2. Run the script /usr/sbin/hbanyware/hbanyware
ppc64/sles8 NOTE:
If you want to use the 64bit HBAAPI libraries you must replace the following line in /etc/hba.conf:
com.emulex.emulexapilibrary /usr/lib/libemulexhbaapi.so
with this line
com.emulex.emulexapilibrary /usr/lib64/libemulexhbaapi.so
ppc64/(non-sles8) and amd64 NOTE:
If you want to use the 64bit HBAAPI libraries you must add the following line in /etc/hba.conf:
com.emulex.emulexapilibrary /usr/lib64/libemulexhbaapi.so
HBAnyware Help:
To view the HBAnyware help pages or to access the Emulex Technical support pages you must have one of the
following web browsers installed:
mozilla, konqueror
Helpful scripts
/usr/sbin/hbanyware/stop_hbanyware - This script will stop all HBAnyware daemons and GUIs.
Run this if you need to unload the driver.
/usr/sbin/hbanyware/start_rmserver - This script will re-start the rmserver daemon.
Run this if you manually load the lpfc driver.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
Applications Kit
Operating System
Linux 2.6 Kernel
Version
8.0.16.27
Size Driver
187.2MB
File Name
elxlinuxapps-3.0a14-8.0.16.27-1-3.tar
Observations
SUSE Linux Enterprise Server 9 Service Pack 2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Red Hat Enterprise Linux 4 Update 2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Oracle Enterprise Linux 4 Update 4 or later (x86 and x64 architectures)
Asianux 2.0 SP2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
HBAnyware utility 3.0a14, lputil 2.0a13, Application helper module 2.0.15 (187 MB tar file)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
Solaris 10 Update 1 behavior change must read before downloading driver Manual
Information
Solaris 8-9-10
Operating System
Manual
Version
6.20j
Size Driver
25KB
File Name
lpfc_100_rbyd.pdf
Observations
Solaris 8, 9 and 10 (32-bit and 64-bit)
Note This driver version requires patch #112438 for
Solaris 8 operation.
Starting with this Solaris driver version 6.20, the driver no longer uses the sd.conf and st.conf files to limit the storage presented to the OS. If your environment uses these files to perform LUN or target masking, refer to the driver manual for important configuration information.
Note Emulex supports current Solaris x86 systems through an SFS driver
Note For a legacy lpfc driver for Solaris 9 x86, or for Solaris 8 SPARC legacy drivers that are not listed under Previous Releases Solaris 10 Updates and the lpfc
Driver
The behavior of the Solaris operating system changes beginning with Solaris 10 Update 1 (also referred
to as Solaris 10 1/06 release). Starting with this version, a bare-metal installation of the operating system
automatically discovers all SFS-recognized HBAs (Sun-branded, Emulex, or EMC-branded) and binds
them to the “emlxs” SFS driver. A subsequent installation of lpfc will not discover and bind these HBAs;
you must use the emlxdrv utility to unbind the HBAs from the SFS driver as described in this document.
Note: You do not need to follow the procedure described in this document in the following
circumstances:
• If the server contains any Sun-branded HBAs, which are recognized
and supported only by the emlxs driver and not by the lpfc driver; you
must use the emlxs driver on all HBAs.
• If you installed an earlier version of Solaris and bound the HBAs to the
lpfc driver; updating to Solaris 10 Update 1 (or later) by applying
patches will not unbind the HBAs from the lpfc driver.
Prerequisites:
• SPARC platform
• Solaris 10 Update 1 or later installed on a local drive
• Sun released patch 120222-06 or later installed
• Emulex® FCA utility version 1.00m (which includes emlxdrv 1.00j for SPARC) or later installed
(see the Emulex FCA Utilities Reference Manual for installation instructions)
• Emulex lpfc driver not yet installed
To unbind the HBAs from the SFS driver, do the following:
1. Start the emlxdrv utility as described in the Emulex FCA Utilities Reference Manual.
2. Type the following command at the emlxdrv prompt:
clear_all
This unbinds from emlxs all HBAs that are recognized by both emlxs and lpfc drivers.
3. Exit the emlxdrv utility by typing the following:
q
Install the lpfc driver as instructed in the documentation that accompanies the driver.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
User Manual Storport Miniport Driver
Information
Windows 2003
Operating System
Manual
Version
2.00a12
Size Driver
984KB
File Name
manual.pdf
Observations
Qualification: The Storport Miniport driver is WHQL qualified for the Microsoft "Designed for Windows" logo program and digitally signed for x86, Itanium and x64 Editions versions of Windows Server 2003 and Windows Server 2003 Datacenter Edition.
Note Windows Server 2003 SP1 or SP2 and the KB932755 update to the Microsoft Storport driver are required. The KB932755 update must be applied before the Emulex Storport Miniport driver version 2.00 can be installed.
Storport Miniport Driver Version 2.00 for Windows Server 2003 and Windows Vista
Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
Manual
Information
Windows 2003
Operating System
Manual
Version
5.10a9 64-Bit
Size Driver
2.1MB
File Name
manual_ws3.pdf
Observations
Qualification: The 64-Bit SCSIport Miniport driver is qualified and digitally signed by WHQL labs.
Note New versions are available for all Emulex drivers that include support for Windows Server 2003 SP1. We recommend that you upgrade to one of these new drivers. In most cases, older drivers can be configured to work with SP1 by running the HBA API-SP1 Migration program prior to installing SP1.
Note If you are currently running the Emulex SCSIport Miniport driver version 5.10a10 or earlier, please follow these
Upgrade Instructions before upgrading from Windows 2000 Server to Windows Server 2003.
Note The installation procedure for the driver and utilities has changed from earlier versions. For installation information, see the online Installation manual.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
Manual
Information
Windows 2003
Operating System
Manual
Version
5.10a10 64-Bit
Size Driver
2.8MB
File Name
manual_ws3.pdf
Observations
Qualification: The 64-bit SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for both Windows Server 2003 and Windows Server 2003, Datacenter Edition.
Note New versions are available for all Emulex drivers that include support for Windows Server 2003 SP1. We recommend that you upgrade to one of these new drivers. In most cases, older drivers can be configured to work with SP1 by running the HBA API-SP1 Migration program prior to installing SP1.
Note If you are currently running the Emulex SCSIport Miniport driver version 5.10a10 or earlier, please follow these
Upgrade Instructions before upgrading from Windows 2000 Server to Windows Server 2003.
Note The installation procedure for the driver and utilities has changed from earlier versions. For installation information, see the online Installation manual.
Installation, Configuration and Troubleshooting (2,869 KB)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
User Manual Storport Miniport Driver
Information
Windows 2000-2003
Operating System
Manual
Version
2.01a4
Size Driver
995KB
File Name
manual.pdf
Observations
Qualification: The Storport Miniport driver is WHQL qualified for the Microsoft "Designed for Windows" logo program and digitally signed for x86, Itanium and x64 Editions versions of Windows Server 2003 and Windows Server 2008.
Note For Windows Server 2003, SP1 or SP2 and the KB932755 update to the Microsoft Storport driver are required. The KB932755 update must be applied before the Emulex Storport Miniport driver version 2.01a4 can be installed.
Storport Miniport Driver Version 2.01 for Windows Server 2003 and Windows Server 2008
Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
User Manual HBAnyware Utility
Information
Windows 2003
Operating System
Manual
Version
2.00a12
Size Driver
3.1MB
File Name
hbanyware.pdf
Observations
Qualification: The Storport Miniport driver is WHQL qualified for the Microsoft "Designed for Windows" logo program and digitally signed for x86, Itanium and x64 Editions versions of Windows Server 2003 and Windows Server 2003 Datacenter Edition.
Note Windows Server 2003 SP1 or SP2 and the KB932755 update to the Microsoft Storport driver are required. The KB932755 update must be applied before the Emulex Storport Miniport driver version 2.00 can be installed.
HBAnyware Utility Version 3.3
Introduction.............................................................................................................. 1
Known Issues .................................................................................................... 1
Installing HBAnyware Components.......................................................................... 2
Installing the HBAnyware Utility......................................................................... 2
Installing the HBAnyware Utility with Web Launch............................................. 4
Installing the HBAnyware Utility Security Configurator ...................................... 5
Uninstalling the HBAnyware Security Configurator............................................ 6
Uninstalling HBAnyware Web Launch Only ....................................................... 7
Uninstalling the Utility Package ......................................................................... 7
Using the HBAnyware Components......................................................................... 8
Starting the HBAnyware Utility........................................................................... 8
Starting HBAnyware with Web Launch .............................................................. 8
Starting the HBAnyware Security Configurator .................................................. 8
Starting HBAnyware from the Command Line ................................................... 9
Examples of Modifications .................................................................... 9
The HBAnyware Utility Window Element Definitions ....................................... 10
The Menu Bar ........................................................................................... 11
The Toolbar ............................................................................................... 11
The Toolbar Buttons .................................................................................. 11
Sort Toolbar Buttons ........................................................................... 11
The Discovery-Tree................................................................................... 12
Discovery-Tree Icons .......................................................................... 12
Property Tabs............................................................................................ 13
Status Bar ................................................................................................. 13
Changing Management Mode ......................................................................... 13
Resetting HBAs ............................................................................................... 14
Discovering HBAs ........................................................................................... 14
Automatic Fibre Channel Discovery .......................................................... 14
Remote SAN Management Using TCP/IP Access Protocol....................... 15
Adding a Single Host .......................................................................... 15
Adding a Range of Hosts .................................................................... 16
Removing Hosts.................................................................................. 17
Configuring Discovery Settings ................................................................. 18
Sorting HBA Information.................................................................................. 19
Viewing Remote and Local HBAs.............................................................. 19
Viewing HBA Information................................................................................. 20
Viewing Discovery Information .................................................................. 20
Viewing Host Information .......................................................................... 21
The Host Information Tab.................................................................... 21
The Driver Parameters Tab................................................................. 22
Viewing General HBA Attributes ............................................................... 23
Viewing Detailed HBA Information ............................................................ 24
Viewing Fabric Information........................................................................ 26
Viewing Target Information........................................................................ 27
Viewing LUN Information........................................................................... 28
Masking and Unmasking LUNs (Windows, Solaris LPFC and
Solaris SFS)........................................................................................ 29
Viewing Port Statistics............................................................................... 31
Viewing Firmware Information ................................................................... 33
Viewing Target Mapping (Windows, Solaris LPFC and Solaris SFS)......... 34
Viewing Target Mapping (Linux) ................................................................ 35
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
User Manual HBAnyware Utility
Information
Windows 2000-2003
Operating System
Manual
Version
2.01a4
Size Driver
3.5MB
File Name
hbanyware.pdf
Observations
Qualification: The Storport Miniport driver is WHQL qualified for the Microsoft "Designed for Windows" logo program and digitally signed for x86, Itanium and x64 Editions versions of Windows Server 2003 and Windows Server 2008.
Note For Windows Server 2003, SP1 or SP2 and the KB932755 update to the Microsoft Storport driver are required. The KB932755 update must be applied before the Emulex Storport Miniport driver version 2.01a4 can be installed.
HBAnyware Utility Version 3.4
Introduction.............................................................................................................. 1
Known Issues .................................................................................................... 1
Installing HBAnyware Components.......................................................................... 2
Installing the HBAnyware Utility......................................................................... 2
Installing the HBAnyware Utility with Web Launch............................................. 4
Installing the HBAnyware Utility Security Configurator ...................................... 5
Uninstalling the HBAnyware Security Configurator............................................ 6
Uninstalling HBAnyware Web Launch Only ....................................................... 7
Uninstalling the Utility Package ......................................................................... 7
Using the HBAnyware Components......................................................................... 8
Starting the HBAnyware Utility........................................................................... 8
Starting HBAnyware with Web Launch .............................................................. 8
Starting the HBAnyware Security Configurator .................................................. 8
Starting HBAnyware from the Command Line ................................................... 9
Examples of Modifications .................................................................... 9
The HBAnyware Utility Window Element Definitions ....................................... 10
The Menu Bar ........................................................................................... 11
The Toolbar ............................................................................................... 11
The Toolbar Buttons .................................................................................. 11
Sort Toolbar Buttons ........................................................................... 11
The Discovery-Tree................................................................................... 12
Discovery-Tree Icons .......................................................................... 12
Property Tabs............................................................................................ 13
Status Bar ................................................................................................. 13
Changing Management Mode ......................................................................... 13
Resetting HBAs ............................................................................................... 14
Discovering HBAs ........................................................................................... 14
Automatic Fibre Channel Discovery .......................................................... 14
Remote SAN Management Using TCP/IP Access Protocol....................... 15
Adding a Single Host .......................................................................... 15
Adding a Range of Hosts .................................................................... 16
Removing Hosts.................................................................................. 17
Configuring Discovery Settings ................................................................. 18
Sorting HBA Information.................................................................................. 19
Viewing Remote and Local HBAs.............................................................. 19
Viewing HBA Information................................................................................. 20
Viewing Discovery Information .................................................................. 20
Viewing Host Information .......................................................................... 21
The Host Information Tab.................................................................... 21
The Driver Parameters Tab................................................................. 22
Viewing General HBA Attributes ............................................................... 23
Viewing Detailed HBA Information ............................................................ 24
Viewing Fabric Information........................................................................ 26
Viewing Target Information........................................................................ 27
Viewing LUN Information........................................................................... 28
Masking and Unmasking LUNs (Windows, Solaris LPFC and
Solaris SFS)........................................................................................ 29
Viewing Port Statistics............................................................................... 31
Viewing Firmware Information ................................................................... 33
Viewing Target Mapping (Windows, Solaris LPFC and Solaris SFS)......... 34
Viewing Target Mapping (Linux) ................................................................ 35
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
Solaris 10 Update 1 behavior change must read before downloading driver Manual
Information
Solaris 2.6-7-8-9-10
Operating System
Manual
Version
6.02h
Size Driver
25KB
File Name
lpfc_100_rbyd.pdf
Observations
Solaris 10 Updates and the lpfc
Driver
The behavior of the Solaris operating system changes beginning with Solaris 10 Update 1 (also referred
to as Solaris 10 1/06 release). Starting with this version, a bare-metal installation of the operating system
automatically discovers all SFS-recognized HBAs (Sun-branded, Emulex, or EMC-branded) and binds
them to the “emlxs” SFS driver. A subsequent installation of lpfc will not discover and bind these HBAs;
you must use the emlxdrv utility to unbind the HBAs from the SFS driver as described in this document.
Note: You do not need to follow the procedure described in this document in the following
circumstances:
• If the server contains any Sun-branded HBAs, which are recognized
and supported only by the emlxs driver and not by the lpfc driver; you
must use the emlxs driver on all HBAs.
• If you installed an earlier version of Solaris and bound the HBAs to the
lpfc driver; updating to Solaris 10 Update 1 (or later) by applying
patches will not unbind the HBAs from the lpfc driver.
Prerequisites:
• SPARC platform
• Solaris 10 Update 1 or later installed on a local drive
• Sun released patch 120222-06 or later installed
• Emulex® FCA utility version 1.00m (which includes emlxdrv 1.00j for SPARC) or later installed
(see the Emulex FCA Utilities Reference Manual for installation instructions)
• Emulex lpfc driver not yet installed
To unbind the HBAs from the SFS driver, do the following:
1. Start the emlxdrv utility as described in the Emulex FCA Utilities Reference Manual.
2. Type the following command at the emlxdrv prompt:
clear_all
This unbinds from emlxs all HBAs that are recognized by both emlxs and lpfc drivers.
3. Exit the emlxdrv utility by typing the following:
q
Install the lpfc driver as instructed in the documentation that accompanies the driver.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
Quick Install
Information
Windows 2003
Operating System
Manual
Version
1.20a7
Size Driver
115KB
File Name
quick_installation.pdf
Observations
Qualification: The Storport Miniport driver is WHQL qualified for the Microsoft "Designed for Windows" logo program and digitally signed for x86, Itanium and x64 Editions versions of Windows Server 2003 and Windows Server 2003 Datacenter Edition.
Note Windows Server 2003 SP1 or later, and the KB932755 update to the Microsoft Storport driver, are required.
Installing the driver using AutoPilot Installer (498 KB)
Introduction
AutoPilot Installer™ for Emulex® drivers provides installation options that range from a simple
installation with a few mouse clicks to custom unattended installations using predefined script files.
AutoPilot Installer is included with Emulex drivers and utilities in Windows executable files that can be
downloaded from the Emulex Web site. Run the distribution executable file to extract all of the software
needed for an installation, then complete the installation using AutoPilot Installer.
AutoPilot Installer allows you to install a driver using any of the following methods:
Hardware-first installation. The host bus adapter (HBA) is installed before the downloaded Emulex
drivers and utilities are installed. See page 3 for this procedure.
Software-first installation. This new installation method allows drivers and utilities to be downloaded
from the Emulex Web site and installed using AutoPilot Installer prior to the installation of any HBAs. The
drivers and utilities are automatically used when HBAs are installed at a later time. See page 4 for this
procedure.
Unattended installation. This new installation method allows you to set up AutoPilot Installer to run
unattended using customized scripts. Unattended installation can be used for both hardware-first and
software-first installations. See the complete Installation section of the driver user manual for more
information.
Updating the Driver Using AutoPilot Installer
If you are currently running an older driver version, use the hardware-first installation procedure to
update your driver. Begin at step 2 to update the driver.
You can also update the Emulex drivers following the manual installation method. See the complete
Installation section of the driver user manual for this procedure.
Distribution Executable File Overview
The distribution executable file is a self-extracting file that includes the following:
• AutoPilot Installer - installs driver and utilities.
• Driver - manages communication and data transfer between applications and I/O devices, using
HBAs as agents.
• HBAnyware utility - performs installation and configuration tasks on remote and local adapters.
• Driver-specific utility (elxcfg for FC Port, lputilnt for Storport Miniport and SCSIport Miniport) -
provides a user-friendly interface that allows you to examine, manage and configure local HBAs.
4. The default installation location is displayed. Browse to a different location, if desired. Click
Install to continue the installation.
5. The Progress window is displayed. As each task is completed, the corresponding checkbox is
automatically selected.
6. After all tasks are completed, a confirmation window is displayed. The Start AutoPilot Installer
checkbox is automatically selected. To start AutoPilot Installer later, clear this checkbox.
7. Click Finish to close the distribution executable file.
AutoPilot Installer Introduction
The Emulex AutoPilot Installer is a Fibre Channel HBA installation wizard for Windows. The AutoPilot
Installer installs (or updates) Emulex drivers and utilities and configures HBAs, drivers and utilities.
Prerequisites
• One of the following operating systems:
•Windows Server 2003 running on an x86, x64 or Itanium 64-bit platform.
•For the Emulex Storport Miniport driver, a Microsoft driver update may be required. See the Emulex Web site for the latest update to the Microsoft Storport driver.
•Windows 2000 Server - Service Pack 4 or later is recommended for all installations. Storport Miniport is not compatible with Windows 2000 Server.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
Manual Installation, Configuration and Troubleshooting for Windows 2000 Server
Information
Windows 2000-2003
Operating System
Manual
Version
5.10a10 32-Bit
Size Driver
2.9MB
File Name
manual_w2k.pdf
Observations
Qualification: The 32-bit SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows Server 2003, and it is Microsoft WHQL qualified and digitally signed for Windows 2000 Server The SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows 2000 Server.
For Windows 2000 Server, Service Pack 4 is required.
Note New versions are available for all Emulex drivers that include support for Windows Server 2003 SP1. We recommend that you upgrade to one of these new drivers. In most cases, older drivers can be configured to work with SP1 by running the HBA API-SP1 Migration program prior to installing SP1.
Note If you are currently running the Emulex SCSIport Miniport driver version 5.10a10 or earlier, please follow these
Upgrade Instructions before upgrading from Windows 2000 Server to Windows Server 2003.
Note The installation procedure for the driver and utilities has changed from earlier versions. For installation information, see the online Installation manual.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
Manual Installation, Configuration and Troubleshooting for Windows 2000 Server
Information
Windows 2003
Operating System
Manual
Version
5.10a9 32-Bit
Size Driver
2.2MB
File Name
manual_w2k.pdf
Observations
Qualification: The 32-Bit SCSIport Miniport driver is qualified and digitally signed by WHQL labs for Windows Server 2003 and Windows 2000 Server and Workstation products (Service Pack 2 or above).
For Windows 2000 Server, Service Pack 4 is required for cluster configurations.
Note New versions are available for all Emulex drivers that include support for Windows Server 2003 SP1. We recommend that you upgrade to one of these new drivers. In most cases, older drivers can be configured to work with SP1 by running the HBA API-SP1 Migration program prior to installing SP1.
Note If you are currently running the Emulex SCSIport Miniport driver version 5.10a10 or earlier, please follow these
Upgrade Instructions before upgrading from Windows 2000 Server to Windows Server 2003.
Note The installation procedure for the driver and utilities has changed from earlier versions. For installation information, see the online Installation manual.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
Quick Install
Information
Windows 2000-2003
Operating System
Manual
Version
5.20a8
Size Driver
90KB
File Name
quick_installation.pdf
Observations
Qualification: The driver for Windows Server 2003 is Microsoft WHQL qualified and digitally signed for Windows Server 2003 on x86 and Itanium platforms. The driver for Windows 2000 Server is qualified and digitally signed by WHQL labs for Server The SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows 2000 Server.
For Windows 2000 Server, Service Pack 4 is required.
OS Versions: Windows Server 2003 SP1 and Windows Server 2000 SP2
Note New versions are available for all Emulex drivers that include support for Windows Server 2003 SP1. We recommend that you upgrade to one of these new drivers. In most cases, older drivers can be configured to work with SP1 by running the HBA API-SP1 Migration program prior to installing SP1.
Note If you are currently running the Emulex SCSIport Miniport driver version 5.10a10 or earlier, please follow these
Upgrade Instructions before upgrading from Windows 2000 Server to Windows Server 2003.
Note If you are upgrading from Windows 2000 Server to Windows Server 2003 and are currently running an Emulex SCSIport Miniport driver, you must uninstall the driver before upgrading the operating system. Reinstall the Emulex SCSIport Miniport driver after you upgrade the operating system.
Installing the driver using AutoPilot Installer (3,085 KB)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
Quick Install
Information
Windows 2000-2003
Operating System
Manual
Version
5.20a9
Size Driver
498KB
File Name
quick_installation.pdf
Observations
Qualification: The SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows Server 2003 on x86 and Itanium 64-bit platforms. The 64-bit Itanium SCSIport Miniport driver is also Microsoft WHQL qualified and digitally signed for Windows Server 2003, Datacenter Edition. The SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows 2000 Server.
For Windows 2000 Server, Service Pack 4 is required.
Installing the driver using AutoPilot Installer (468 KB)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
Manual
Information
Windows 2003
Operating System
Manual
Version
1.30a9
Size Driver
4.6MB
File Name
manual.pdf
Observations
Qualification: The Storport Miniport driver is WHQL qualified for the Microsoft "Designed for Windows" logo program and digitally signed for x86, Itanium and x64 Editions versions of Windows Server 2003 and Windows Server 2003 Datacenter Edition.
Note Windows Server 2003 SP1 or later, and the KB932755 update to the Microsoft Storport driver, are required.
Installation, Configuration and Troubleshooting
Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
Manual
Information
Windows 2003
Operating System
Manual
Version
1.20a7
Size Driver
3.6MB
File Name
storport120manual.pdf
Observations
Qualification: The Storport Miniport driver is WHQL qualified for the Microsoft "Designed for Windows" logo program and digitally signed for x86, Itanium and x64 Editions versions of Windows Server 2003 and Windows Server 2003 Datacenter Edition.
Note The KB916048 update to the Microsoft Storport driver is required.
Installation, Configuration and Troubleshooting (3,264 KB)
Introduction.............................................................................................................. 1
Important Considerations......................................................................................... 2
Changing Driver Types...................................................................................... 2
Microsoft Storport Driver Update ....................................................................... 2
Updating the Storport Miniport Driver Using AutoPilot Installer.......................... 2
Definitions................................................................................................................ 2
Storport Miniport Driver Information ......................................................................... 3
Prerequisites ..................................................................................................... 3
Compatibility...................................................................................................... 3
New in This Release ......................................................................................... 3
Known Issues .................................................................................................... 3
Files Included in this AutoPilot Installer ............................................................. 4
Distribution Executable File Overview ..................................................................... 5
Running the Distribution Executable File ........................................................... 5
AutoPilot Installer..................................................................................................... 6
Introduction ....................................................................................................... 6
Prerequisites ............................................................................................... 6
AutoPilot Installer Features ......................................................................... 6
Configuration Questions.............................................................................. 6
Installation Planning .......................................................................................... 6
AutoPilot Installation Procedures ............................................................................. 7
Hardware-First Installation................................................................................. 7
If the Installation Fails ................................................................................. 8
Software-First Installation .................................................................................. 8
Installing the HBAnyware Security Configurator ...................................................... 9
Unattended Installation .......................................................................................... 10
AutoPilot Configuration File Format................................................................. 10
Mandatory Configuration File Changes ........................................................... 10
Deleting Questions in the APInstall.cfg File ..................................................... 11
Optional Configuration File Changes............................................................... 11
Setting Up Driver Parameters.......................................................................... 14
Setting Up System Parameters ....................................................................... 14
Unattended Error Codes Reference Table....................................................... 14
Invoking AutoPilot Installer .............................................................................. 15
Batch File Example ......................................................................................... 15
Manually Installing or Updating the Storport Miniport Driver .................................. 17
Overview ......................................................................................................... 17
Removing the Adjunct Driver Registry Key...................................................... 17
Manually Installing the Emulex PLUS (ElxPlus) Driver .................................... 17
Manually Updating the Emulex PLUS (ElxPlus) Driver .................................... 18
Manually Installing or Updating the Storport Miniport Driver ............................ 19
Manually Installing the Driver Utilities .............................................................. 20
Uninstalling the Utility Package ....................................................................... 20
Uninstalling the Emulex Drivers....................................................................... 22
Configuration ...........................................................................................................23
Introduction............................................................................................................ 23
Starting HBAnyware from the Desktop ............................................................ 24
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
Manual
Information
Windows 2000-2003
Operating System
Manual
Version
5.20a9
Size Driver
2.9MB
File Name
manual.pdf
Observations
Qualification: The SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows Server 2003 on x86 and Itanium 64-bit platforms. The 64-bit Itanium SCSIport Miniport driver is also Microsoft WHQL qualified and digitally signed for Windows Server 2003, Datacenter Edition. The SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows 2000 Server.
For Windows 2000 Server, Service Pack 4 is required.
Installation, Configuration and Troubleshooting
Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
Manual
Information
Windows 2000-2003
Operating System
Manual
Version
5.20a8
Size Driver
2.9MB
File Name
manual.pdf
Observations
Qualification: The driver for Windows Server 2003 is Microsoft WHQL qualified and digitally signed for Windows Server 2003 on x86 and Itanium platforms. The driver for Windows 2000 Server is qualified and digitally signed by WHQL labs for Server The SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows 2000 Server.
For Windows 2000 Server, Service Pack 4 is required.
OS Versions: Windows Server 2003 SP1 and Windows Server 2000 SP2
Note New versions are available for all Emulex drivers that include support for Windows Server 2003 SP1. We recommend that you upgrade to one of these new drivers. In most cases, older drivers can be configured to work with SP1 by running the HBA API-SP1 Migration program prior to installing SP1.
Note If you are currently running the Emulex SCSIport Miniport driver version 5.10a10 or earlier, please follow these
Upgrade Instructions before upgrading from Windows 2000 Server to Windows Server 2003.
Note If you are upgrading from Windows 2000 Server to Windows Server 2003 and are currently running an Emulex SCSIport Miniport driver, you must uninstall the driver before upgrading the operating system. Reinstall the Emulex SCSIport Miniport driver after you upgrade the operating system.
Installation, Configuration and Troubleshooting
Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
Manual
Information
Solaris 8-9-10
Operating System
Manual
Version
6.11cx2
Size Driver
4.6MB
File Name
manual.pdf
Observations
Solaris 8, 9 and 10 (32-bit and 64-bit)
Note: Emulex recommends installing driver version 6.11cx2, which adds a critical fix to the previously posted 6.11c driver. Driver functionality and behavior are otherwise identical.
Note Emulex supports current Solaris x86 systems through an SFS driver
For a legacy lpfc driver for Solaris 9 x86, or for Solaris 8 SPARC legacy drivers that are not listed under Previous Releases
Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
Manual
Information
Solaris 8-9-10
Operating System
Manual
Version
6.10gx2
Size Driver
3.7MB
File Name
manual.pdf
Observations
Solaris 8, 9 and 10 (32-bit and 64-bit)
Note Emulex recommends installing driver version 6.10gx2, which adds a critical fix to the previously posted 6.10g driver. Driver functionality and behavior are otherwise identical.
Note Emulex supports current Solaris x86 systems through an SFS driver
For a legacy lpfc driver for Solaris 9 x86, or for Solaris 8 SPARC legacy drivers that are not listed under Previous Releases
Installation, Configuration and Troubleshooting
Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
Manual
Information
Solaris 2.6-7-8-9-10
Operating System
Manual
Version
6.02h
Size Driver
2.7MB
File Name
manual.pdf
Observations
Solaris 2.6, 7, 8, 9 and 10 (32-bit and 64-bit)
Installation, Configuration and Troubleshooting
Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
Manual
Information
Solaris 2.6-7-8-9-10
Operating System
Manual
Version
6.02g
Size Driver
2.7MB
File Name
manual.pdf
Observations
Solaris 2.6, 7, 8, 9 and 10 (32-bit and 64-bit)
Installation, Configuration and Troubleshooting
Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
Manual
Information
Linux 2.6 Kernel
Operating System
Manual
Version
8.2.0.22
Size Driver
1.5MB
File Name
manual.pdf
Observations
Red Hat Enterprise Linux 5.0 and later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
SUSE Linux Enterprise Server 10 SP1 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Oracle Enterprise Linux 5 or later (x86 and x64 architectures)
Driver for Linux User Manual
Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
Manual
Information
Solaris 2.6-7-8-9-10
Operating System
Manual
Version
6.02f
Size Driver
2.7MB
File Name
set.pdf
Observations
Solaris 2.6, 7, 8, 9 and 10 (32-bit and 64-bit)
Installation, Configuration and Troubleshooting (2,727 KB)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
Manual
Information
Linux 2.6 Kernel
Operating System
Manual
Version
8.1.10.12
Size Driver
3.5MB
File Name
manual.pdf
Observations
Red Hat Enterprise Linux 5.0 and later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
SUSE Linux Enterprise Server 10 SP1 (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Installation, Configuration and Troubleshooting
Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
Manual Installation, Configuration and Troubleshooting for Windows Server 2003
Information
Windows 2003
Operating System
Manual
Version
5.10a10 32-Bit
Size Driver
2.8MB
File Name
manual_ws3.pdf
Observations
Qualification: The 32-bit SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows Server 2003, and it is Microsoft WHQL qualified and digitally signed for Windows 2000 Server The SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows 2000 Server.
For Windows 2000 Server, Service Pack 4 is required.
Note New versions are available for all Emulex drivers that include support for Windows Server 2003 SP1. We recommend that you upgrade to one of these new drivers. In most cases, older drivers can be configured to work with SP1 by running the HBA API-SP1 Migration program prior to installing SP1.
Note If you are currently running the Emulex SCSIport Miniport driver version 5.10a10 or earlier, please follow these
Upgrade Instructions before upgrading from Windows 2000 Server to Windows Server 2003.
Note The installation procedure for the driver and utilities has changed from earlier versions. For installation information, see the online Installation manual.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
Manual Installation, Configuration and Troubleshooting for Windows Server 2003
Information
Windows 2003
Operating System
Manual
Version
5.10a9 32-Bit
Size Driver
2.1MB
File Name
manual_ws3.pdf
Observations
Qualification: The 32-Bit SCSIport Miniport driver is qualified and digitally signed by WHQL labs for Windows Server 2003 and Windows 2000 Server and Workstation products (Service Pack 2 or above).
For Windows 2000 Server, Service Pack 4 is required for cluster configurations.
Note New versions are available for all Emulex drivers that include support for Windows Server 2003 SP1. We recommend that you upgrade to one of these new drivers. In most cases, older drivers can be configured to work with SP1 by running the HBA API-SP1 Migration program prior to installing SP1.
Note If you are currently running the Emulex SCSIport Miniport driver version 5.10a10 or earlier, please follow these
Upgrade Instructions before upgrading from Windows 2000 Server to Windows Server 2003.
Note The installation procedure for the driver and utilities has changed from earlier versions. For installation information, see the online Installation manual.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
Manual
Information
Linux 2.6 Kernel
Operating System
Manual
Version
8.0.16.32
Size Driver
3.6MB
File Name
manual.pdf
Observations
SUSE Linux Enterprise Server 9 Service Pack 2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Red Hat Enterprise Linux 4 Update 2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Oracle Enterprise Linux 4 Update 4 or later (x86 and x64 architectures)
Asianux 2.0 SP2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
Manual
Information
Linux 2.6 Kernel
Operating System
Manual
Version
8.0.16.27
Size Driver
3MB
File Name
manual.pdf
Observations
SUSE Linux Enterprise Server 9 Service Pack 2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Red Hat Enterprise Linux 4 Update 2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Oracle Enterprise Linux 4 Update 4 or later (x86 and x64 architectures)
Asianux 2.0 SP2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Installation, Configuration and Troubleshooting
Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
Manual
Information
Linux 2.6 Kernel
Operating System
Manual
Version
8.0.16.17
Size Driver
2.3MB
File Name
manual.pdf
Observations
SUSE Linux Enterprise Server 9 Service Pack 1 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Red Hat Enterprise Linux 4 Update 1 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Installation, Configuration and Troubleshooting
Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
lputil Manual
Information
Linux 2.6 Kernel
Operating System
Manual
Version
8.0.16.34
Size Driver
329KB
File Name
lputil.pdf
Observations
SUSE Linux Enterprise Server 9 Service Pack 2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Red Hat Enterprise Linux 4 Update 2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Oracle Enterprise Linux 4 Update 4 or later (x86 and x64 architectures)
Asianux 2.0 SP2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Introduction.............................................................................................................. 1
Installing lputil .......................................................................................................... 1
Starting lputil............................................................................................................ 2
Discovering HBAs.................................................................................................... 4
Viewing HBA Information......................................................................................... 4
Resetting an HBA .................................................................................................... 5
Updating an HBA’s Firmware or Boot Code ............................................................. 5
Enabling or Disabling Boot Code ............................................................................. 6
Downloading PCI Configuration............................................................................... 7
Setting Up Persistent Binding (Solaris Only)............................................................ 7
Using the Command Line Interface ......................................................................... 9
Examples of lputil Commands................................................................... 11
Introduction
The LightPulse® diagnostic utility (lputil) for Linux and Solaris is a console application that enables you
to manage local Emulex® host bus adapters (HBAs).
Use lputil to do any of the following:
• Discover HBAs
• View HBA information
• Reset HBAs
• Update firmware or boot code on the local HBA
• Enable or disable the boot code on the HBA
• Download PCI Configuration
• Set Up Persistent Binding (Solaris only)
• Use the Command Line Interface (CLI)
Prerequisites
Before using lputil, ensure the following prerequisites are met:
• The Emulex driver is installed.
• The lputil utility is installed.
• If you are updating firmware, the firmware file is downloaded to a local drive. Firmware versions
differ between HBA versions. Make sure you have downloaded the appropriate firmware for your
HBA.
• I/O activity on the bus is quieted.
• Any software that relies on the HBA to be available is stopped or paused.
Installing lputil
To install lputil:
1. Download the lputil.tar file from the Emulex Web site to a directory on a local drive on the server.
2. Untar the contents of the lputil.tar file.
3. Run the lputil installation script.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
lputil Manual
Information
Solaris 8-9-10
Operating System
Manual
Version
6.20j
Size Driver
329KB
File Name
lputil.pdf
Observations
Solaris 8, 9 and 10 (32-bit and 64-bit)
Note This driver version requires patch #112438 for
Solaris 8 operation.
Starting with this Solaris driver version 6.20, the driver no longer uses the sd.conf and st.conf files to limit the storage presented to the OS. If your environment uses these files to perform LUN or target masking, refer to the driver manual for important configuration information.
Note Emulex supports current Solaris x86 systems through an SFS driver
Note For a legacy lpfc driver for Solaris 9 x86, or for Solaris 8 SPARC legacy drivers that are not listed under Previous Releases
lputil Utility User Manual
Introduction.............................................................................................................. 1
Installing lputil .......................................................................................................... 1
Starting lputil............................................................................................................ 2
Discovering HBAs.................................................................................................... 4
Viewing HBA Information......................................................................................... 4
Resetting an HBA .................................................................................................... 5
Updating an HBA’s Firmware or Boot Code ............................................................. 5
Enabling or Disabling Boot Code ............................................................................. 6
Downloading PCI Configuration............................................................................... 7
Setting Up Persistent Binding (Solaris Only)............................................................ 7
Using the Command Line Interface ......................................................................... 9
Examples of lputil Commands................................................................... 11
Introduction
The LightPulse® diagnostic utility (lputil) for Linux and Solaris is a console application that enables you
to manage local Emulex® host bus adapters (HBAs).
Use lputil to do any of the following:
• Discover HBAs
• View HBA information
• Reset HBAs
• Update firmware or boot code on the local HBA
• Enable or disable the boot code on the HBA
• Download PCI Configuration
• Set Up Persistent Binding (Solaris only)
• Use the Command Line Interface (CLI)
Prerequisites
Before using lputil, ensure the following prerequisites are met:
• The Emulex driver is installed.
• The lputil utility is installed.
• If you are updating firmware, the firmware file is downloaded to a local drive. Firmware versions
differ between HBA versions. Make sure you have downloaded the appropriate firmware for your
HBA.
• I/O activity on the bus is quieted.
• Any software that relies on the HBA to be available is stopped or paused.
Installing lputil
To install lputil:
1. Download the lputil.tar file from the Emulex Web site to a directory on a local drive on the server.
2. Untar the contents of the lputil.tar file.
3. Run the lputil installation script.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
HBAnyware Manual
Information
Solaris 8-9-10
Operating System
Manual
Version
6.21f
Size Driver
3.5MB
File Name
hbanyware.pdf
Observations
Solaris 8, 9 and 10 (32-bit and 64-bit)
Note This driver version requires patch #112438 for
Solaris 8 operation.
Starting with Solaris driver version 6.20, the driver no longer uses the sd.conf and st.conf files to limit the storage presented to the OS. If your environment uses these files to perform LUN or target masking, refer to the driver manual for important configuration information.
Note - Emulex supports current Solaris x86 systems through an SFS driver
Note - For legacy lpfc drivers that are not listed under Previous Releases
HBAnyware Utility User Manual
Introduction.............................................................................................................. 1
Known Issues .................................................................................................... 1
Installing HBAnyware Components.......................................................................... 2
Installing the HBAnyware Utility......................................................................... 2
Installing the HBAnyware Utility with Web Launch............................................. 4
Installing the HBAnyware Utility Security Configurator ...................................... 5
Uninstalling the HBAnyware Security Configurator............................................ 6
Uninstalling HBAnyware Web Launch Only ....................................................... 7
Uninstalling the Utility Package ......................................................................... 7
Using the HBAnyware Components......................................................................... 8
Starting the HBAnyware Utility........................................................................... 8
Starting HBAnyware with Web Launch .............................................................. 8
Starting the HBAnyware Security Configurator .................................................. 8
Starting HBAnyware from the Command Line ................................................... 9
Examples of Modifications .................................................................... 9
The HBAnyware Utility Window Element Definitions ....................................... 10
The Menu Bar ........................................................................................... 11
The Toolbar ............................................................................................... 11
The Toolbar Buttons .................................................................................. 11
Sort Toolbar Buttons ........................................................................... 11
The Discovery-Tree................................................................................... 12
Discovery-Tree Icons .......................................................................... 12
Property Tabs............................................................................................ 13
Status Bar ................................................................................................. 13
Changing Management Mode ......................................................................... 13
Resetting HBAs ............................................................................................... 14
Discovering HBAs ........................................................................................... 14
Automatic Fibre Channel Discovery .......................................................... 14
Remote SAN Management Using TCP/IP Access Protocol....................... 15
Adding a Single Host .......................................................................... 15
Adding a Range of Hosts .................................................................... 16
Removing Hosts.................................................................................. 17
Configuring Discovery Settings ................................................................. 18
Sorting HBA Information.................................................................................. 19
Viewing Remote and Local HBAs.............................................................. 19
Viewing HBA Information................................................................................. 20
Viewing Discovery Information .................................................................. 20
Viewing Host Information .......................................................................... 21
The Host Information Tab.................................................................... 21
The Driver Parameters Tab................................................................. 22
Viewing General HBA Attributes ............................................................... 23
Viewing Detailed HBA Information ............................................................ 24
Viewing Fabric Information........................................................................ 26
Viewing Target Information........................................................................ 27
Viewing LUN Information........................................................................... 28
Masking and Unmasking LUNs (Windows, Solaris LPFC and
Solaris SFS)........................................................................................ 29
Viewing Port Statistics............................................................................... 31
Viewing Firmware Information ................................................................... 33
Viewing Target Mapping (Windows, Solaris LPFC and Solaris SFS)......... 34
Viewing Target Mapping (Linux) ................................................................ 35
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
Quick Installation Manual
Information
Windows 2000-2003
Operating System
Manual
Version
2.01a4
Size Driver
114KB
File Name
quick_installation.pdf
Observations
Qualification: The Storport Miniport driver is WHQL qualified for the Microsoft "Designed for Windows" logo program and digitally signed for x86, Itanium and x64 Editions versions of Windows Server 2003 and Windows Server 2008.
Note For Windows Server 2003, SP1 or SP2 and the KB932755 update to the Microsoft Storport driver are required. The KB932755 update must be applied before the Emulex Storport Miniport driver version 2.01a4 can be installed.
AutoPilot Installer for Windows Server 2003 and Windows Server 2008
Introduction
AutoPilot Installer® for Emulex® drivers provides installation options that range from a simple installation
with a few mouse clicks to custom unattended installations using predefined script files.
AutoPilot Installer is included with Emulex drivers and utilities in Windows executable files that can be
downloaded from the Emulex Web site. Run the distribution executable file to extract all of the software
needed for an installation, then complete the installation using AutoPilot Installer.
AutoPilot Installer allows you to install a driver using any of the following methods:
Hardware-first installation. The host bus adapter (HBA) is installed before the downloaded Emulex
drivers and utilities are installed. See page 3 for this procedure.
Software-first installation. This new installation method allows drivers and utilities to be downloaded
from the Emulex Web site and installed using AutoPilot Installer prior to the installation of any HBAs. The
drivers and utilities are automatically used when HBAs are installed at a later time. See page 4 for this
procedure.
Unattended installation. This new installation method allows you to set up AutoPilot Installer to run
unattended using customized scripts. Unattended installation can be used for both hardware-first and
software-first installations. See the complete Installation section of the driver user manual for more
information.
Note: Complete driver and utilities documentation may be downloaded from the Emulex Web site
(www.emulex.com). Click Support at the top of the Web page and navigate by clicking the appropriate
links.
Updating the Driver Using AutoPilot Installer
If you are currently running an older driver version, use the hardware-first installation procedure to
update your driver. Begin at step 2 to update the driver.
You can also update the Emulex drivers following the manual installation method. See the complete
Installation section of the driver user manual for this procedure.
Distribution Executable File Overview
The distribution executable file is a self-extracting file that includes the following:
• AutoPilot Installer - installs driver and utilities.
• Driver - manages communication and data transfer between applications and I/O devices, using
HBAs as agents.
• HBAnyware utility - performs installation and configuration tasks on remote and local adapters.
Distribution Executable File Procedure
To run the distribution executable file:
1. Download the distribution executable file from the Emulex Web site to your system.
2. Double-click the distribution executable file. A window is displayed with driver version
information and Emulex contact information
3. Click Next to access the Location window or click Cancel to close the window.
4. The default installation location is displayed. Browse to a different location, if desired. Click
Install to continue the installation.
5. The Progress window is displayed. As each task is completed, the corresponding checkbox is
automatically selected.
6. After all tasks are completed, a confirmation window is displayed. The Start AutoPilot Installer
checkbox is automatically selected. To start AutoPilot Installer later, clear this checkbox.
7. Click Finish to close the distribution executable file.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
Driver Manual
Information
Solaris 8-9-10
Operating System
Manual
Version
6.21f
Size Driver
1.5MB
File Name
manual.pdf
Observations
Solaris 8, 9 and 10 (32-bit and 64-bit)
Note This driver version requires patch #112438 for
Solaris 8 operation.
Starting with Solaris driver version 6.20, the driver no longer uses the sd.conf and st.conf files to limit the storage presented to the OS. If your environment uses these files to perform LUN or target masking, refer to the driver manual for important configuration information.
Note - Emulex supports current Solaris x86 systems through an SFS driver
Note - For legacy lpfc drivers that are not listed under Previous Releases
LPFC Driver for Solaris User Manual
Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
HBAnyware Manual
Information
Solaris 8-9-10
Operating System
Manual
Version
6.20j
Size Driver
3.1MB
File Name
hbanyware.pdf
Observations
Solaris 8, 9 and 10 (32-bit and 64-bit)
Note This driver version requires patch #112438 for
Solaris 8 operation.
Starting with this Solaris driver version 6.20, the driver no longer uses the sd.conf and st.conf files to limit the storage presented to the OS. If your environment uses these files to perform LUN or target masking, refer to the driver manual for important configuration information.
Note Emulex supports current Solaris x86 systems through an SFS driver
Note For a legacy lpfc driver for Solaris 9 x86, or for Solaris 8 SPARC legacy drivers that are not listed under Previous Releases
HBAnyware Utility User Manual
Introduction.............................................................................................................. 1
Known Issues .................................................................................................... 1
Installing HBAnyware Components.......................................................................... 2
Installing the HBAnyware Utility......................................................................... 2
Installing the HBAnyware Utility with Web Launch............................................. 4
Installing the HBAnyware Utility Security Configurator ...................................... 5
Uninstalling the HBAnyware Security Configurator............................................ 6
Uninstalling HBAnyware Web Launch Only ....................................................... 7
Uninstalling the Utility Package ......................................................................... 7
Using the HBAnyware Components......................................................................... 8
Starting the HBAnyware Utility........................................................................... 8
Starting HBAnyware with Web Launch .............................................................. 8
Starting the HBAnyware Security Configurator .................................................. 8
Starting HBAnyware from the Command Line ................................................... 9
Examples of Modifications .................................................................... 9
The HBAnyware Utility Window Element Definitions ....................................... 10
The Menu Bar ........................................................................................... 11
The Toolbar ............................................................................................... 11
The Toolbar Buttons .................................................................................. 11
Sort Toolbar Buttons ........................................................................... 11
The Discovery-Tree................................................................................... 12
Discovery-Tree Icons .......................................................................... 12
Property Tabs............................................................................................ 13
Status Bar ................................................................................................. 13
Changing Management Mode ......................................................................... 13
Resetting HBAs ............................................................................................... 14
Discovering HBAs ........................................................................................... 14
Automatic Fibre Channel Discovery .......................................................... 14
Remote SAN Management Using TCP/IP Access Protocol....................... 15
Adding a Single Host .......................................................................... 15
Adding a Range of Hosts .................................................................... 16
Removing Hosts.................................................................................. 17
Configuring Discovery Settings ................................................................. 18
Sorting HBA Information.................................................................................. 19
Viewing Remote and Local HBAs.............................................................. 19
Viewing HBA Information................................................................................. 20
Viewing Discovery Information .................................................................. 20
Viewing Host Information .......................................................................... 21
The Host Information Tab.................................................................... 21
The Driver Parameters Tab................................................................. 22
Viewing General HBA Attributes ............................................................... 23
Viewing Detailed HBA Information ............................................................ 24
Viewing Fabric Information........................................................................ 26
Viewing Target Information........................................................................ 27
Viewing LUN Information........................................................................... 28
Masking and Unmasking LUNs (Windows, Solaris LPFC and
Solaris SFS)........................................................................................ 29
Viewing Port Statistics............................................................................... 31
Viewing Firmware Information ................................................................... 33
Viewing Target Mapping (Windows, Solaris LPFC and Solaris SFS)......... 34
Viewing Target Mapping (Linux) ................................................................ 35
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
HBAnyware Manual
Information
Linux 2.6 Kernel
Operating System
Manual
Version
8.2.0.22
Size Driver
3.5MB
File Name
hbanyware.pdf
Observations
Red Hat Enterprise Linux 5.0 and later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
SUSE Linux Enterprise Server 10 SP1 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Oracle Enterprise Linux 5 or later (x86 and x64 architectures)
HBAnyware Utility User Manual
Introduction.............................................................................................................. 1
Known Issues .................................................................................................... 1
Installing HBAnyware Components.......................................................................... 2
Installing the HBAnyware Utility......................................................................... 2
Installing the HBAnyware Utility with Web Launch............................................. 4
Installing the HBAnyware Utility Security Configurator ...................................... 5
Uninstalling the HBAnyware Security Configurator............................................ 6
Uninstalling HBAnyware Web Launch Only ....................................................... 7
Uninstalling the Utility Package ......................................................................... 7
Using the HBAnyware Components......................................................................... 8
Starting the HBAnyware Utility........................................................................... 8
Starting HBAnyware with Web Launch .............................................................. 8
Starting the HBAnyware Security Configurator .................................................. 8
Starting HBAnyware from the Command Line ................................................... 9
Examples of Modifications .................................................................... 9
The HBAnyware Utility Window Element Definitions ....................................... 10
The Menu Bar ........................................................................................... 11
The Toolbar ............................................................................................... 11
The Toolbar Buttons .................................................................................. 11
Sort Toolbar Buttons ........................................................................... 11
The Discovery-Tree................................................................................... 12
Discovery-Tree Icons .......................................................................... 12
Property Tabs............................................................................................ 13
Status Bar ................................................................................................. 13
Changing Management Mode ......................................................................... 13
Resetting HBAs ............................................................................................... 14
Discovering HBAs ........................................................................................... 14
Automatic Fibre Channel Discovery .......................................................... 14
Remote SAN Management Using TCP/IP Access Protocol....................... 15
Adding a Single Host .......................................................................... 15
Adding a Range of Hosts .................................................................... 16
Removing Hosts.................................................................................. 17
Configuring Discovery Settings ................................................................. 18
Sorting HBA Information.................................................................................. 19
Viewing Remote and Local HBAs.............................................................. 19
Viewing HBA Information................................................................................. 20
Viewing Discovery Information .................................................................. 20
Viewing Host Information .......................................................................... 21
The Host Information Tab.................................................................... 21
The Driver Parameters Tab................................................................. 22
Viewing General HBA Attributes ............................................................... 23
Viewing Detailed HBA Information ............................................................ 24
Viewing Fabric Information........................................................................ 26
Viewing Target Information........................................................................ 27
Viewing LUN Information........................................................................... 28
Masking and Unmasking LUNs (Windows, Solaris LPFC and
Solaris SFS)........................................................................................ 29
Viewing Port Statistics............................................................................... 31
Viewing Firmware Information ................................................................... 33
Viewing Target Mapping (Windows, Solaris LPFC and Solaris SFS)......... 34
Viewing Target Mapping (Linux) ................................................................ 35
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
HBAnyware Manual
Information
Linux 2.6 Kernel
Operating System
Manual
Version
8.0.16.34
Size Driver
3.1MB
File Name
hbanyware.pdf
Observations
SUSE Linux Enterprise Server 9 Service Pack 2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Red Hat Enterprise Linux 4 Update 2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Oracle Enterprise Linux 4 Update 4 or later (x86 and x64 architectures)
Asianux 2.0 SP2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Introduction.............................................................................................................. 1
Known Issues .................................................................................................... 1
Installing HBAnyware Components.......................................................................... 2
Installing the HBAnyware Utility......................................................................... 2
Installing the HBAnyware Utility with Web Launch............................................. 4
Installing the HBAnyware Utility Security Configurator ...................................... 5
Uninstalling the HBAnyware Security Configurator............................................ 6
Uninstalling HBAnyware Web Launch Only ....................................................... 7
Uninstalling the Utility Package ......................................................................... 7
Using the HBAnyware Components......................................................................... 8
Starting the HBAnyware Utility........................................................................... 8
Starting HBAnyware with Web Launch .............................................................. 8
Starting the HBAnyware Security Configurator .................................................. 8
Starting HBAnyware from the Command Line ................................................... 9
Examples of Modifications .................................................................... 9
The HBAnyware Utility Window Element Definitions ....................................... 10
The Menu Bar ........................................................................................... 11
The Toolbar ............................................................................................... 11
The Toolbar Buttons .................................................................................. 11
Sort Toolbar Buttons ........................................................................... 11
The Discovery-Tree................................................................................... 12
Discovery-Tree Icons .......................................................................... 12
Property Tabs............................................................................................ 13
Status Bar ................................................................................................. 13
Changing Management Mode ......................................................................... 13
Resetting HBAs ............................................................................................... 14
Discovering HBAs ........................................................................................... 14
Automatic Fibre Channel Discovery .......................................................... 14
Remote SAN Management Using TCP/IP Access Protocol....................... 15
Adding a Single Host .......................................................................... 15
Adding a Range of Hosts .................................................................... 16
Removing Hosts.................................................................................. 17
Configuring Discovery Settings ................................................................. 18
Sorting HBA Information.................................................................................. 19
Viewing Remote and Local HBAs.............................................................. 19
Viewing HBA Information................................................................................. 20
Viewing Discovery Information .................................................................. 20
Viewing Host Information .......................................................................... 21
The Host Information Tab.................................................................... 21
The Driver Parameters Tab................................................................. 22
Viewing General HBA Attributes ............................................................... 23
Viewing Detailed HBA Information ............................................................ 24
Viewing Fabric Information........................................................................ 26
Viewing Target Information........................................................................ 27
Viewing LUN Information........................................................................... 28
Masking and Unmasking LUNs (Windows, Solaris LPFC and
Solaris SFS)........................................................................................ 29
Viewing Port Statistics............................................................................... 31
Viewing Firmware Information ................................................................... 33
Viewing Target Mapping (Windows, Solaris LPFC and Solaris SFS)......... 34
Viewing Target Mapping (Linux) ................................................................ 35
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
FCA Utilities Manual
Information
Solaris 8-9-10
Operating System
Manual
Version
6.21f
Size Driver
863KB
File Name
sfs_utilities.pdf
Observations
Solaris 8, 9 and 10 (32-bit and 64-bit)
Note This driver version requires patch #112438 for
Solaris 8 operation.
Starting with Solaris driver version 6.20, the driver no longer uses the sd.conf and st.conf files to limit the storage presented to the OS. If your environment uses these files to perform LUN or target masking, refer to the driver manual for important configuration information.
Note - Emulex supports current Solaris x86 systems through an SFS driver
Note - For legacy lpfc drivers that are not listed under Previous Releases
Instructions for using emlxdrv
Introduction.............................................................................................................. 1
Fibre Channel Overview .................................................................................... 1
The Solaris Fibre Channel Stack ....................................................................... 1
Installing the Utilities................................................................................................ 3
Compatibility...................................................................................................... 3
Installing or Updating the Utilities Using the emlxu_install Script....................... 4
Removing the Utilities Using the emlxu_remove Script ..................................... 5
Installing the Utilities Package Manually............................................................ 6
Removing the Utilities Package Manually.......................................................... 7
Updating the Utilities Package Manually ........................................................... 7
Using the emlxadm Utility ........................................................................................ 8
Modes of Operation (emlxadm) ......................................................................... 8
Interactive Mode (emlxadm)........................................................................ 8
CLI Mode (emlxadm)................................................................................... 9
Command Descriptions (emlxadm) ................................................................. 11
Using the emlxdrv Utility ........................................................................................ 31
Modes of Operation (emlxdrv) ......................................................................... 31
Interactive Mode (emlxdrv)........................................................................ 31
CLI Mode (emlxdrv)................................................................................... 33
Command Descriptions (emlxdrv) ................................................................... 33
This document provides the information needed to use the Emulex® emlxadm and elmxdrv utility
programs. For system administrators, this document includes information about the installation and
removal of these utilities.
At the very least, system administrators should be familiar with Solaris and the Sun StorEdge SAN
Foundation Software (SFS) and should have access to standard system documentation. Anyone
working with this product should have some familiarity with the nature and use of Fibre Channel.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
Driver Manual
Information
Solaris 8-9-10
Operating System
Manual
Version
6.20j
Size Driver
1.6MB
File Name
manual.pdf
Observations
This driver version requires patch #112438 for
Solaris 8 operation.
Starting with this Solaris driver version 6.20, the driver no longer uses the sd.conf and st.conf files to limit the storage presented to the OS. If your environment uses these files to perform LUN or target masking, refer to the driver manual for important configuration information.
Base driver, HBAnyware utility 3.3a22 and lputil 2.0a13
HBAnyware 3.3a19 Solaris Installation Instructions
Dependencies:
lpfcdriver 6.20g, emlxsdriver 2.20a, or later
hbaapi 2.0.f
Java Runtime Environment
Version 1.5 or later of the Java Runtime Environment (JRE) must
be installed. HBAnyware will not run under earlier versions of
the JRE.
HBAnyware and hbacmd currently will not run under Solaris 6. HBAnyware and hbacmd target OS versions
include Solaris 5.8, 5.9, 5.10, and 5.11.
The JRE and instructions for installation can be found at http://java.sun.com/downloads/index.html
JAVA NOTE:
HBAnyware needs the java runtime binaries and libraries, so their path needs to be included in the PATH
environment variable. For example, if your java runtime binaries are in /usr/java/bin, then include this path
in your PATH environment variable. (bash> export PATH="$PATH:/usr/java/bin")
HBAnyware is dependant on a driver being installed, so install lpfcdriver or emlxsdriver first if it is not already installed.
1. Run the pkgrm routine to remove any previous version of HBAnyware: pkgrm HBAnyware
2. Run the unpack script : ./unpack_apps
to obtain correct package version
3. Unzip the file: gunzip HBAnyware-3.3a19-sparc.tar.gz
4. Untar the file: tar -xvf HBAnyware-3.3a19-sparc.tar
5. Run the pkgadd utility: pkgadd -d .
6. When prompted by pkgadd, choose to install HBAnyware
7. When prompted by pkgadd, answer the HBAnyware installation option questions
Running the HBAnyware GUI
1. su to root
2. Run the script /usr/sbin/hbanyware/hbanyware
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
FCA Utilities Manual
Information
Solaris 8-9-10
Operating System
Manual
Version
6.10gx2
Size Driver
1MB
File Name
manual.pdf
Observations
Solaris 8, 9 and 10 (32-bit and 64-bit)
Note Emulex recommends installing driver version 6.10gx2, which adds a critical fix to the previously posted 6.10g driver. Driver functionality and behavior are otherwise identical.
Note Emulex supports current Solaris x86 systems through an SFS driver
For a legacy lpfc driver for Solaris 9 x86, or for Solaris 8 SPARC legacy drivers that are not listed under Previous Releases
Installing and using the FCA utilities
Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
FCA Utilities Manual
Information
Solaris 2.6-7-8-9-10
Operating System
Manual
Version
6.02h
Size Driver
1MB
File Name
manual.pdf
Observations
Solaris 2.6, 7, 8, 9 and 10 (32-bit and 64-bit)
Installing and using the FCA utilities
Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
FCA Utilities Manual
Information
Solaris 2.6-7-8-9-10
Operating System
Manual
Version
6.02f
Size Driver
609KB
File Name
manual.pdf
Observations
Solaris 2.6, 7, 8, 9 and 10 (32-bit and 64-bit)
Installing and using the FCA utilities
Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
Driver Manual
Information
Linux 2.6 Kernel
Operating System
Manual
Version
8.0.16.34
Size Driver
1.1MB
File Name
manual.pdf
Observations
SUSE Linux Enterprise Server 9 Service Pack 2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Red Hat Enterprise Linux 4 Update 2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Oracle Enterprise Linux 4 Update 4 or later (x86 and x64 architectures)
Asianux 2.0 SP2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
FCA Utilities
Operating System
Solaris 2.6-7-8-9-10
Version
6.02g
Size Driver
76KB
File Name
emlxu_kit-1.00m-sparc.tar
Observations
Solaris 2.6, 7, 8, 9 and 10 (32-bit and 64-bit)
emlxadm version 1.00q and emlxdrv version 1.00j for SPARC; emlxdrv is needed for a fresh installation of Solaris 10 Update 1 (77 KB tar file)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
FCA Utilities
Operating System
Solaris 2.6-7-8-9-10
Version
6.02h
Size Driver
76KB
File Name
emlxu_kit-1.00n-sparc.tar
Observations
Solaris 2.6, 7, 8, 9 and 10 (32-bit and 64-bit)
emlxadm version 1.00r and emlxdrv version 1.00k for SPARC; emlxdrv is needed for a fresh installation of Solaris 10 Update 1 (75.5 KB tar file)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
Driver Kit
Operating System
Solaris 2.6-7-8-9-10
Version
6.02h
Size Driver
12MB
File Name
solaris-2.1a18-6.02h-1a.tar
Observations
Solaris 2.6, 7, 8, 9 and 10 (32-bit and 64-bit)
Base driver, HBAnyware utility 2.1a18, HBAnyware Security Configurator 2.1a18 and lputil 2.0a9
HBAnyware 2.1a18 Solaris Installation Instructions
Dependencies:
lpfcdriver 6.02c, or later
hbaapi 2.0e
Java Runtime Environment
Version 1.4 or later of the Java Runtime Environment (JRE) must
be installed. HBAnyware will not run under earlier versions of
the JRE.
HBAnyware and hbacmd currently will not run under Solaris 6.
The JRE and instructions for installation can be found at http://java.sun.com/downloads/index.html
JAVA NOTE:
HBAnyware needs the java runtime binaries and libraries, so their path needs to be included in the PATH
environment variable. For example, if your java runtime binaries are in /usr/java/bin, then include this path
in your PATH environment variable. (bash> export PATH="$PATH:/usr/java/bin")
HBAnyware is dependant on lpfcdriver being installed, so install lpfcdriver first if it is not already installed.
1. Run the pkgrm routine to remove any previous version of HBAnyware: pkgrm HBAnyware
2. Copy the HBAnyware-2.1a18-sparc.tar.gz file to a directory on the install machine
3. cd to the directory which you copied the tar file
4. Unzip the file: gunzip HBAnyware-2.1a18-sparc.tar.gz
5. Untar the file: tar -xvf HBAnyware-2.1a18-sparc.tar
6. Run the pkgadd routine: pkgadd -d .
7. When prompted by pkadd, choose to install HBAnyware
Running the HBAnyware GUI
1. su to root
2. Run the script /usr/sbin/hbanyware/hbanyware
Helpful scripts
/usr/sbin/hbanyware/stop_hbanyware - This script will stop all HBAnyware daemons and GUIs.
Run this if you need to unload the driver.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
Driver Kit
Operating System
Solaris 2.6-7-8-9-10
Version
6.02f
Size Driver
12MB
File Name
solaris-2.1a18-6.02f-1a.tar
Observations
Solaris 2.6, 7, 8, 9 and 10 (32-bit and 64-bit)
Base driver, HBAnyware utility 2.1a18, HBAnyware Security Configurator 2.1a18 and lputil 2.0a9
This kit contains the following components:
lpfc-6.02f-sparc.tar - Emulex Fibre Channel Solaris Driver
EmlxApps300a39-Solaris.tar - Emulex Applications kit
readme.first.txt - this file
It is important that the components of this kit be installed in the
appropriate order:
1) The driver kit must be installed first, followed by the applications
kit. Instructions for installing the driver kit can be found on the
Emulex website - www.emulex.com, under /ts/docfc/solframe.htm.
2) Once the driver has been successfully installed, then the applications
kit must be installed. Instructions for installing the applications kit
can be found in the README.txt file contained in the EmlxApps300a39-Solaris.tar package.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
Driver Kit
Operating System
Solaris 2.6-7-8-9-10
Version
6.02g
Size Driver
12MB
File Name
solaris-2.1a18-6.02g-1a.tar
Observations
Solaris 2.6, 7, 8, 9 and 10 (32-bit and 64-bit)
Base driver, HBAnyware utility 2.1a18, HBAnyware Security Configurator 2.1a18 and lputil 2.0a9
HBAnyware 2.1a18 Solaris Installation Instructions
Dependencies:
lpfcdriver 6.02c, or later
hbaapi 2.0e
Java Runtime Environment
Version 1.4 or later of the Java Runtime Environment (JRE) must
be installed. HBAnyware will not run under earlier versions of
the JRE.
HBAnyware and hbacmd currently will not run under Solaris 6.
The JRE and instructions for installation can be found at http://java.sun.com/downloads/index.html
JAVA NOTE:
HBAnyware needs the java runtime binaries and libraries, so their path needs to be included in the PATH
environment variable. For example, if your java runtime binaries are in /usr/java/bin, then include this path
in your PATH environment variable. (bash> export PATH="$PATH:/usr/java/bin")
HBAnyware is dependant on lpfcdriver being installed, so install lpfcdriver first if it is not already installed.
1. Run the pkgrm routine to remove any previous version of HBAnyware: pkgrm HBAnyware
2. Copy the HBAnyware-2.1a18-sparc.tar.gz file to a directory on the install machine
3. cd to the directory which you copied the tar file
4. Unzip the file: gunzip HBAnyware-2.1a18-sparc.tar.gz
5. Untar the file: tar -xvf HBAnyware-2.1a18-sparc.tar
6. Run the pkgadd routine: pkgadd -d .
7. When prompted by pkadd, choose to install HBAnyware
Running the HBAnyware GUI
1. su to root
2. Run the script /usr/sbin/hbanyware/hbanyware
Helpful scripts
/usr/sbin/hbanyware/stop_hbanyware - This script will stop all HBAnyware daemons and GUIs.
Run this if you need to unload the driver.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
Driver Kit
Operating System
Solaris 8-9-10
Version
6.10gx2
Size Driver
20MB
File Name
solaris-3.0a17-6.10gx2-1a.tar
Observations
Solaris 8, 9 and 10 (32-bit and 64-bit)
Note Emulex recommends installing driver version 6.10gx2, which adds a critical fix to the previously posted 6.10g driver. Driver functionality and behavior are otherwise identical.
Note Emulex supports current Solaris x86 systems through an SFS driver
For a legacy lpfc driver for Solaris 9 x86, or for Solaris 8 SPARC legacy drivers that are not listed under Previous Releases
Base driver, HBAnyware utility 3.0a17 and lputil 2.0a13
HBAnyware 3.0a17 Solaris Installation Instructions
Dependencies:
lpfcdriver 6.10b, or later
hbaapi 2.0f
Java Runtime Environment
Version 1.4 or later of the Java Runtime Environment (JRE) must
be installed. HBAnyware will not run under earlier versions of
the JRE.
HBAnyware and hbacmd currently will not run under Solaris 6. HBAnyware and hbacmd target OS versions
include Solaris 5.8, 5.9, and 5.10.
The JRE and instructions for installation can be found at http://java.sun.com/downloads/index.html
JAVA NOTE:
HBAnyware needs the java runtime binaries and libraries, so their path needs to be included in the PATH
environment variable. For example, if your java runtime binaries are in /usr/java/bin, then include this path
in your PATH environment variable. (bash> export PATH="$PATH:/usr/java/bin")
HBAnyware is dependant on lpfcdriver being installed, so install lpfcdriver first if it is not already installed.
1. Run the pkgrm routine to remove any previous version of HBAnyware: pkgrm HBAnyware
2. Run the unpack script : ./unpack_apps
to obtain correct package version
3. Unzip the file: gunzip HBAnyware-3.0a17-sparc.tar.gz
4. Untar the file: tar -xvf HBAnyware-3.0a17-sparc.tar
5. Run the pkgadd utility: pkgadd -d .
6. When prompted by pkadd, choose to install HBAnyware
7. When prompted by pkadd, answer the HBAnyware installation option questions
Running the HBAnyware GUI
1. su to root
2. Run the script /usr/sbin/hbanyware/hbanyware
Helpful scripts
/usr/sbin/hbanyware/stop_hbanyware - This script will stop all HBAnyware daemons and GUIs.
Run this if you need to unload the driver.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
Driver Kit
Operating System
Solaris 8-9-10
Version
6.11cx2
Size Driver
24.1MB
File Name
solaris-3.1a12-6.11cx2-1a.tar
Observations
Solaris 8, 9 and 10 (32-bit and 64-bit)
Note: Emulex recommends installing driver version 6.11cx2, which adds a critical fix to the previously posted 6.11c driver. Driver functionality and behavior are otherwise identical.
Note Emulex supports current Solaris x86 systems through an SFS driver
For a legacy lpfc driver for Solaris 9 x86, or for Solaris 8 SPARC legacy drivers that are not listed under Previous Releases
Base driver, HBAnyware utility 3.1a12 and lputil 2.0a13
HBAnyware 3.1a12 Solaris Installation Instructions
Dependencies:
lpfcdriver 6.11c, emlxsdriver 2.20a, or later
hbaapi 2.0f
Java Runtime Environment
Version 1.5 or later of the Java Runtime Environment (JRE) must
be installed. HBAnyware will not run under earlier versions of
the JRE.
HBAnyware and hbacmd currently will not run under Solaris 6. HBAnyware and hbacmd target OS versions
include Solaris 5.8, 5.9, and 5.10.
The JRE and instructions for installation can be found at http://java.sun.com/downloads/index.html
JAVA NOTE:
HBAnyware needs the java runtime binaries and libraries, so their path needs to be included in the PATH
environment variable. For example, if your java runtime binaries are in /usr/java/bin, then include this path
in your PATH environment variable. (bash> export PATH="$PATH:/usr/java/bin")
HBAnyware is dependant on a driver being installed, so install lpfcdriver or emlxsdriver first if it is not already installed.
1. Run the pkgrm routine to remove any previous version of HBAnyware: pkgrm HBAnyware
2. Run the unpack script : ./unpack_apps
to obtain correct package version
3. Unzip the file: gunzip HBAnyware-3.1a12-sparc.tar.gz
4. Untar the file: tar -xvf HBAnyware-3.1a12-sparc.tar
5. Run the pkgadd utility: pkgadd -d .
6. When prompted by pkadd, choose to install HBAnyware
7. When prompted by pkadd, answer the HBAnyware installation option questions
Running the HBAnyware GUI
1. su to root
2. Run the script /usr/sbin/hbanyware/hbanyware
Helpful scripts
/usr/sbin/hbanyware/stop_hbanyware - This script will stop all HBAnyware daemons and GUIs.
Run this if you need to unload the driver.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
FCA Utilities
Operating System
Solaris 8-9-10
Version
6.10gx2
Size Driver
76KB
File Name
emlxu_kit-1.00n-sparc.tar
Observations
Solaris 8, 9 and 10 (32-bit and 64-bit)
Note Emulex recommends installing driver version 6.10gx2, which adds a critical fix to the previously posted 6.10g driver. Driver functionality and behavior are otherwise identical.
Note Emulex supports current Solaris x86 systems through an SFS driver
For a legacy lpfc driver for Solaris 9 x86, or for Solaris 8 SPARC legacy drivers that are not listed under Previous Releases
emlxadm version 1.00r and emlxdrv version 1.00k for SPARC; emlxdrv is needed for a fresh installation of Solaris 10 Update 1 (75.5 KB tar file)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
FCA Utilities
Operating System
Solaris 8-9-10
Version
6.21f
Size Driver
212KB
File Name
emlxu_kit-1.01a-sparc.tar
Observations
Solaris 8, 9 and 10 (32-bit and 64-bit)
Note This driver version requires patch #112438 for
Solaris 8 operation.
Starting with Solaris driver version 6.20, the driver no longer uses the sd.conf and st.conf files to limit the storage presented to the OS. If your environment uses these files to perform LUN or target masking, refer to the driver manual for important configuration information.
Note - Emulex supports current Solaris x86 systems through an SFS driver
Note - For legacy lpfc drivers that are not listed under Previous Releases
emlxadm version 1.01a and emlxdrv version 1.00k for SPARC; emlxdrv is needed for a fresh installation of Solaris 10 Update 1 (75.5 KB tar file)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
Driver Kit
Operating System
Solaris 8-9-10
Version
6.20j
Size Driver
21.5MB
File Name
solaris-3.3a19-6.20j-1b.tar
Observations
Solaris 8, 9 and 10 (32-bit and 64-bit)
Note This driver version requires patch #112438 for
Solaris 8 operation.
Starting with this Solaris driver version 6.20, the driver no longer uses the sd.conf and st.conf files to limit the storage presented to the OS. If your environment uses these files to perform LUN or target masking, refer to the driver manual for important configuration information.
Note Emulex supports current Solaris x86 systems through an SFS driver
Note For a legacy lpfc driver for Solaris 9 x86, or for Solaris 8 SPARC legacy drivers that are not listed under Previous Releases
Base driver, HBAnyware utility 3.3a22 and lputil 2.0a13 (21.5 MB tar file)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
Driver Kit
Operating System
Solaris 8-9-10
Version
6.21f
Size Driver
21.5MB
File Name
solaris-3.4a15-6.21f-1a.tar
Observations
Solaris 8, 9 and 10 (32-bit and 64-bit)
Note This driver version requires patch #112438 for
Solaris 8 operation.
Starting with Solaris driver version 6.20, the driver no longer uses the sd.conf and st.conf files to limit the storage presented to the OS. If your environment uses these files to perform LUN or target masking, refer to the driver manual for important configuration information.
Note - Emulex supports current Solaris x86 systems through an SFS driver
Note - For legacy lpfc drivers that are not listed under Previous Releases
Base driver, HBAnyware utility 3.4a15, emlxdrv utility 1.00l; emlxdrv is needed for a fresh installation of Solaris 10 Update 1
HBAnyware 3.4a15 Solaris Installation Instructions
Dependencies:
lpfcdriver 6.21a, emlxsdriver 2.20a, or later
hbaapi 2.0.f
Java Runtime Environment
Version 1.5 or later of the Java Runtime Environment (JRE) must
be installed. HBAnyware will not run under earlier versions of
the JRE.
HBAnyware and hbacmd currently will not run under Solaris 6. HBAnyware and hbacmd target OS versions
include Solaris 5.8, 5.9, 5.10, and 5.11.
The JRE and instructions for installation can be found at http://java.sun.com/downloads/index.html
JAVA NOTE:
HBAnyware needs the java runtime binaries and libraries, so their path needs to be included in the PATH
environment variable. For example, if your java runtime binaries are in /usr/java/bin, then include this path
in your PATH environment variable. (bash> export PATH="$PATH:/usr/java/bin")
HBAnyware is dependant on a driver being installed, so install lpfcdriver or emlxsdriver first if it is not already installed.
1. Run the pkgrm routine to remove any previous version of HBAnyware: pkgrm HBAnyware
2. Run the unpack script : ./unpack_apps
to obtain correct package version
3. Unzip the file: gunzip HBAnyware-3.4a15-sparc.tar.gz
4. Untar the file: tar -xvf HBAnyware-3.4a15-sparc.tar
5. Run the pkgadd utility: pkgadd -d .
6. When prompted by pkgadd, choose to install HBAnyware
7. When prompted by pkgadd, answer the HBAnyware installation option questions
Running the HBAnyware GUI
1. su to root
2. Run the script /opt/emulex/hbanyware/hbanyware
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
Driver Kit
Operating System
Windows 2000-2003
Version
2.01a4
Size Driver
8.8MB
File Name
storportminiportkit_2-01a4-1h.exe
Observations
Qualification: The Storport Miniport driver is WHQL qualified for the Microsoft "Designed for Windows" logo program and digitally signed for x86, Itanium and x64 Editions versions of Windows Server 2003 and Windows Server 2008.
Note For Windows Server 2003, SP1 or SP2 and the KB932755 update to the Microsoft Storport driver are required. The KB932755 update must be applied before the Emulex Storport Miniport driver version 2.01a4 can be installed.
Base driver, HBAnyware utility 3.4a9 (8.83 MB exe file)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
Driver Kit
Operating System
Windows 2000-2003
Version
5.20a8
Size Driver
14MB
File Name
scsiportminiportkit_5-20a8c-2g.exe
Observations
Qualification: The driver for Windows Server 2003 is Microsoft WHQL qualified and digitally signed for Windows Server 2003 on x86 and Itanium platforms. The driver for Windows 2000 Server is qualified and digitally signed by WHQL labs for Server The SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows 2000 Server.
For Windows 2000 Server, Service Pack 4 is required.
OS Versions: Windows Server 2003 SP1 and Windows Server 2000 SP2
Note New versions are available for all Emulex drivers that include support for Windows Server 2003 SP1. We recommend that you upgrade to one of these new drivers. In most cases, older drivers can be configured to work with SP1 by running the HBA API-SP1 Migration program prior to installing SP1.
Note If you are currently running the Emulex SCSIport Miniport driver version 5.10a10 or earlier, please follow these
Upgrade Instructions before upgrading from Windows 2000 Server to Windows Server 2003.
Note If you are upgrading from Windows 2000 Server to Windows Server 2003 and are currently running an Emulex SCSIport Miniport driver, you must uninstall the driver before upgrading the operating system. Reinstall the Emulex SCSIport Miniport driver after you upgrade the operating system.
Base driver, HBAnyware utility 2.1a16 and lputilnt 1.8a13
(14.4 MB exe file)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
Driver Kit
Operating System
Windows 2000-2003
Version
5.20a9
Size Driver
14.3MB
File Name
scsiportminiportkit_5-20a9-1d.exe
Observations
Qualification: The SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows Server 2003 on x86 and Itanium 64-bit platforms. The 64-bit Itanium SCSIport Miniport driver is also Microsoft WHQL qualified and digitally signed for Windows Server 2003, Datacenter Edition. The SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows 2000 Server.
For Windows 2000 Server, Service Pack 4 is required.
Base driver, HBAnyware utility 2.1a17 and lputilnt 1.8a15 (15 MB exe file)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
SMI-S Provider Kit
Operating System
Windows 2000-2003
Version
5.20a9
Size Driver
6.9MB
File Name
elxsmiprovider1.0.12-1.exe
Observations
Qualification: The SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows Server 2003 on x86 and Itanium 64-bit platforms. The 64-bit Itanium SCSIport Miniport driver is also Microsoft WHQL qualified and digitally signed for Windows Server 2003, Datacenter Edition. The SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows 2000 Server.
For Windows 2000 Server, Service Pack 4 is required.
SMI-S HBA Provider, compliant with the SMI-S 1.0.2 specification and certified against the SNIA-CTP v1.0.2.23 suite
Pre-packaged with OpenPegasus CIMOM v2.3.2, as a turnkey SMI-S agent for ease of installation and deployment
(6.97 MB exe file)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
Driver Kit 64-bit
Operating System
Windows 2003
Version
5.10a9 64-Bit
Size Driver
6.1MB
File Name
scsiport-6-5.10a9-sp1.zip
Observations
Qualification: The 64-Bit SCSIport Miniport driver is qualified and digitally signed by WHQL labs.
Note New versions are available for all Emulex drivers that include support for Windows Server 2003 SP1. We recommend that you upgrade to one of these new drivers. In most cases, older drivers can be configured to work with SP1 by running the HBA API-SP1 Migration program prior to installing SP1.
Note If you are currently running the Emulex SCSIport Miniport driver version 5.10a10 or earlier, please follow these
Upgrade Instructions before upgrading from Windows 2000 Server to Windows Server 2003.
Note The installation procedure for the driver and utilities has changed from earlier versions. For installation information, see the online Installation manual.
This kit contains the following components:
ns6510a9dc.zip - Emulex Fibre Channel SCSIport Miniport Driver
Emlx64Apps20a21-SP1.zip - Emulex Applications kit
readme.first.txt - this file
The detailed contents for each of these components can be found in
the readme files included in each individual kit. The specific minimum
system requirements for each of these kits can be found in the same files.
The installation for the Emulex Applications Kit has been updated
to install the hbaapi.dll file in the Emulex utilities directory
to be compatible with Windows Server 2003 Service Pack 1.
It is important that the components of this kit be installed in the
appropriate order:
1) The driver kit must be installed first, followed by the applications
kit. Instructions for installing the driver kit can be found in the
readme.txt file included in the ns6510a9dc.zip package.
2) Once the driver has been successfully installed, then the applications
kit must be installed. Instructions for installing the applications
kit can be found in the readme.pdf file contained in the Emulex
Applications Kit listed above.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
SMI-S Provider Kit
Operating System
Windows 2003
Version
1.30a9
Size Driver
7.1MB
File Name
elxsmiprovider1.1.6-2.exe
Observations
Qualification: The Storport Miniport driver is WHQL qualified for the Microsoft "Designed for Windows" logo program and digitally signed for x86, Itanium and x64 Editions versions of Windows Server 2003 and Windows Server 2003 Datacenter Edition.
Note Windows Server 2003 SP1 or later, and the KB932755 update to the Microsoft Storport driver, are required.
SMI-S HBA Provider, compliant with the SMI-S 1.1.0 specification and certified against the SNIA-CTP v1.1.0.85 suite
Pre-packaged with OpenPegasus CIMOM v2.5.1, as a turnkey SMI-S agent for ease of installation and deployment
(7.18 MB exe file)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
Driver Kit
Operating System
Windows 2003
Version
1.20a7
Size Driver
17.9MB
File Name
storportminiportkit_1-20a7-1d.exe
Observations
Qualification: The Storport Miniport driver is WHQL qualified for the Microsoft "Designed for Windows" logo program and digitally signed for x86, Itanium and x64 Editions versions of Windows Server 2003 and Windows Server 2003 Datacenter Edition.
Note The KB916048 update to the Microsoft Storport driver is required.
Base driver, HBAnyware utility 3.0a16 and lputilnt version 1.8a19 (17.9 MB exe file)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
Driver Kit
Operating System
Windows 2003
Version
1.30a9
Size Driver
24.2MB
File Name
storportminiportkit_1-30a9-1e.exe
Observations
Qualification: The Storport Miniport driver is WHQL qualified for the Microsoft "Designed for Windows" logo program and digitally signed for x86, Itanium and x64 Editions versions of Windows Server 2003 and Windows Server 2003 Datacenter Edition.
Note Windows Server 2003 SP1 or later, and the KB932755 update to the Microsoft Storport driver, are required.
Base driver, HBAnyware utility 3.1a8 and lputilnt version 1.8a19 (24 MB exe file)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
Driver Kit
Operating System
Windows 2003
Version
2.00a12
Size Driver
21.4MB
File Name
storportminiportkit_2-00a12-1d.exe
Observations
Qualification: The Storport Miniport driver is WHQL qualified for the Microsoft "Designed for Windows" logo program and digitally signed for x86, Itanium and x64 Editions versions of Windows Server 2003 and Windows Server 2003 Datacenter Edition.
Note Windows Server 2003 SP1 or SP2 and the KB932755 update to the Microsoft Storport driver are required. The KB932755 update must be applied before the Emulex Storport Miniport driver version 2.00 can be installed.
Base driver, HBAnyware utility 3.3a14 (21.4 MB exe file)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
Driver Kit 32-bit
Operating System
Windows 2003
Version
5.10a10 32-Bit
Size Driver
5.2MB
File Name
scsiport-5-5.10a10-sp1.zip
Observations
Qualification: The 32-bit SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows Server 2003, and it is Microsoft WHQL qualified and digitally signed for Windows 2000 Server The SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows 2000 Server.
For Windows 2000 Server, Service Pack 4 is required.
This kit contains the following components:
ns5510a10sc.zip - Emulex Fibre Channel SCSIport Miniport Driver
EmlxApps20a21-SP1.zip - Emulex Applications kit
readme.first.txt - this file
The detailed contents for each of these components can be found in
the readme files included in each individual kit. The specific minimum
system requirements for each of these kits can be found in the same files.
The installation for the Emulex Applications Kit has been updated
to install the hbaapi.dll file in the Emulex utilities directory
to be compatible with Windows Server 2003 Service Pack 1.
It is important that the components of this kit be installed in the
appropriate order:
1) The driver kit must be installed first, followed by the applications
kit. Instructions for installing the driver kit can be found in the
readme.txt file included in the Emulex Driver Kit listed above.
2) Once the driver has been successfully installed, then the applications
kit must be installed. Instructions for installing the applications
kit can be found in the readme.pdf file contained in the Emulex
Applications Kit listed above.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
Driver Kit 32-bit
Operating System
Windows 2003
Version
5.10a9 32-Bit
Size Driver
5.2MB
File Name
scsiport-5-5.10a9-sp1.zip
Observations
Qualification: The 32-Bit SCSIport Miniport driver is qualified and digitally signed by WHQL labs for Windows Server 2003 and Windows 2000 Server and Workstation products (Service Pack 2 or above).
For Windows 2000 Server, Service Pack 4 is required for cluster configurations.
Note New versions are available for all Emulex drivers that include support for Windows Server 2003 SP1. We recommend that you upgrade to one of these new drivers. In most cases, older drivers can be configured to work with SP1 by running the HBA API-SP1 Migration program prior to installing SP1.
Note If you are currently running the Emulex SCSIport Miniport driver version 5.10a10 or earlier, please follow these
Upgrade Instructions before upgrading from Windows 2000 Server to Windows Server 2003.
Note The installation procedure for the driver and utilities has changed from earlier versions. For installation information, see the online Installation manual.
Base driver, HBAnyware utility 2.0a21 and lputilnt 1.7a21
This kit contains the following components:
ns5510a9sc.zip - Emulex Fibre Channel SCSIport Miniport Driver
EmlxApps20a21-SP1.zip - Emulex Applications kit
readme.first.txt - this file
The detailed contents for each of these components can be found in
the readme files included in each individual kit. The specific minimum
system requirements for each of these kits can be found in the same files.
The installation for the Emulex Applications Kit has been updated to install
the hbaapi.dll file in the Emulex utilities directory to be compatible with
Windows Server 2003 Service Pack 1.
It is important that the components of this kit be installed in the
appropriate order:
1) The driver kit must be installed first, followed by the applications
kit. Instructions for installing the driver kit can be found in the
readme.txt file included in the ns5510a9sc.zip package.
2) Once the driver has been successfully installed, then the applications
kit must be installed. Instructions for installing the applications
kit can be found in the readme.pdf file contained in the Emulex
applications kit listed above.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9000
Description
Driver Kit 64-bit
Operating System
Windows 2003
Version
5.10a10 64-Bit
Size Driver
6.1MB
File Name
scsiport-6-5.10a10-sp1.zip
Observations
Qualification: The 64-bit SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for both Windows Server 2003 and Windows Server 2003, Datacenter Edition.
This kit contains the following components:
ns6510a10dc.zip - Emulex Fibre Channel SCSIport Miniport Driver
Emlx64Apps20a21-SP1.zip - Emulex Applications kit
readme.first.txt - this file
The detailed contents for each of these components can be found in
the readme files included in each individual kit. The specific minimum
system requirements for each of these kits can be found in the same files.
The installation for the Emulex Applications Kit has been updated
to install the hbaapi.dll file in the Emulex utilities directory
to be compatible with Windows Server 2003 Service Pack 1.
It is important that the components of this kit be installed in the
appropriate order:
1) The driver kit must be installed first, followed by the applications
kit. Instructions for installing the driver kit can be found in the
readme.txt file included in the Emulex Driver Kit listed above.
2) Once the driver has been successfully installed, then the applications
kit must be installed. Instructions for installing the applications
kit can be found in the readme.pdf file contained in the Emulex
Applications Kit listed above.
Access to Official Website Emulex
Welcome to the HelpDrivers, driver for printers.
Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more
You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.
Do not rename the file you're downloading, it may cause installation problems.