Available 6 files for Emulex OCe10102

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for Emulex

Model

Emulex OCe10102

Description

Windows Drivers Release Notes

Information

Windows 2003-2008-2008 R2

Operating System

Manual

Version

Ethernet (driver version 2.101.374.0)

Size Driver

37KB

File Name

driver_release_notes.pdf

Observations

This driver supports FCoE, iSCSI and Ethernet adapters as well as FC adapters.
Qualification:
Microsoft currently does not offer an FCoE WHQL "Certified for Windows" logo program. When the Storport Miniport driver is used with a standard Fibre Channel HBA, the driver is qualified for the "Certified for Windows" logo program. When the Storport MiniPort driver is used with an FCoE CNA, the driver is considered "unclassified" by Microsoft. In both cases, the Storport Miniport drivers are digitally signed by Microsoft and will be recognized by Windows Sever 2003, Windows Server 2008 and Windows Server 2008 R2.
Note
On FC and FCoE adapters, for Windows Server 2003, SP2 and the KB932755 update to the Microsoft Storport driver are required. KB945119 is recommended. The Storport KB update must be applied before the Emulex Storport Miniport driver can be installed.
Tested Architectures:
x86
x64
IA64 (FC only)

Release Notes
Date: March 2009 Product: Driver for Linux Version: 8.2.8.14 This document describes the new features, resolved known issues and current known issues associated with this driver build release. For the latest product documentation, go to www.Emulex.com. If you have any questions or require additional information, contact an authorized Emulex Corporation technical support representative.
New Features Driver for Linux 8.2.8.14
1. Supports the LP21000 and LP21002 FCoE adapters. (10 Gb/s capable) 2. Supports the LPe1250, LPe1252, LPe12000 and LPe12002 adapters. (2, 4 and 8 Gb/s capable) 3. Supports the latest HBAnyware utility version 4.1 as part of the master kit. Refer to the HBAnyware Utility User Manual for more information. 4. Supports SuSE Linux Enterprise Server 11. (Intel x86, Intel Itanium2, Intel EM64T, AMD64, and PowerPC 64-bit architectures) 5. Adds interfaces via the sysfs file system to update speed and topology parameters without requiring link bounce. 6. Supports Power Management Suspend/Resume operations. 7.
Resolved Issues in Driver for Linux 8.2.8.14
Supports MSI-X interrupt handling.
Known Issues in Driver for Linux 8.2.8.14
There are no resolved issues in this driver version.
1. PCI Hot Plug may cause applications to malfunction Performing a PCI Hot Plug may cause the HBAnyware utilities or third party applications that use the Emulex libraries (i.e. HBAAPI) to behave unpredictably or malfunction. Workaround: 1. Stop all applications that are accessing LPFC's HBAAPI interface (HBAnyware utilities or third party applications) before performing PCI Hot Plug of an LPFC HBA. Use the following command to stop the HBAnyware application: #/usr/sbin/hbanyware/stop_hbanyware 2. Perform the PCI Hot Plug of the HBA. 3. Restart the application.
2. Deleting virtual ports or performing a PCI Hot Unplug may result in SCSI errors When you delete a virtual port via the sysfs interface or perform a PCI Hot Unplug of an Emulex HBA, the kernel may report one of the following errors: kernel: Synchronizing SCSI cache for disk kernel: FAILED or SCSI error: return code = 0x00010000. Workaround: These messages do not indicate a functional failure and can be ignored. 3. LILO is not Supported The LILO Boot Loader on i386 and x86_64 architectures is not supported for this driver stream. If the LILO boot loader is used, after the LPFC driver package is installed and upon reboot, an incorrect initial ramdisk is used. The system may not boot correctly. Workaround: Use the GRUB boot loader. This is the default boot loader for most of the Linux distributions. 4. Issue with the LPFC module order in the INITRD_MODULES list. On the SLES10 SP1 system, if another SCSI driver such as aic79xx, is loaded right after the LPFC driver through the initrd image, an interruption might occur in the SCSI mid-layer discovery process on the LUNs connected to LPFC’s Fibre Channel. This interruption can prevent the release of the SCSI discovery reference count and the LPFC driver cannot unload. Workaround: Do not add SCSI drivers right after the LPFC module in the INITRD_MODULES list. 5. The LPFC driver may not finish discovery when two initiator ports are swapped. This causes all devices accessible through one or both of these initiator ports to time out and all I/O to fail. Workaround: Do one of the following:
• When swapping cables replace each cable, one at a time, and allow for discovery to complete before replacing the next cable. To determine if discovery is complete read the "state" sysfs parameter.
• When swapping cables, allow devloss timeout to fire before replacing the cables. (This fails all outstanding I/O.)
6. Deleted virtual ports may appear to be mounted, but are inaccessible. While Emulex provides management utilities to enable you to delete virtual ports, the LPFC driver cannot detect whether devices accessed through a virtual port are in use. You can delete a virtual port even when devices accessible through the virtual port are mounted or when I/O is outstanding to the device. If file systems are mounted on a virtual port and that virtual port is deleted, the file systems still appear to be mounted but are not be accessible. Workaround: Before deleting virtual ports, prepare the system affected by unmounting all the devices accessible through the virtual ports, and verifying that there is no outstanding I/O. 7. 4 Gb/s HBAs in virtualized environments that use Direct I/O or SFPT do not Initialize. Default driver configuration fails to initialize 4 Gb/s HBAs in virtualized environments that use Direct I/O or SFPT(Storage Fixed Pass through) .This may result in a system hang or uninitialized LPFC HBA in Intel VT-d and AMD-V IOMMU systems.

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for Emulex

Model

Emulex OCe10102

Description

User Manual for Windows 2003-2008-2008 R2

Information

Manual

Operating System

Manual

Version

Ethernet (driver version 2.101.374.0)

Size Driver

2.4MB

File Name

windows_drivers.pdf

Observations

This driver supports FCoE, iSCSI and Ethernet adapters as well as FC adapters.
Qualification:
Microsoft currently does not offer an FCoE WHQL "Certified for Windows" logo program. When the Storport Miniport driver is used with a standard Fibre Channel HBA, the driver is qualified for the "Certified for Windows" logo program. When the Storport MiniPort driver is used with an FCoE CNA, the driver is considered "unclassified" by Microsoft. In both cases, the Storport Miniport drivers are digitally signed by Microsoft and will be recognized by Windows Sever 2003, Windows Server 2008 and Windows Server 2008 R2.
Note
On FC and FCoE adapters, for Windows Server 2003, SP2 and the KB932755 update to the Microsoft Storport driver are required. KB945119 is recommended. The Storport KB update must be applied before the Emulex Storport Miniport driver can be installed.
Tested Architectures:
x86
x64
IA64 (FC only)
User manual for Emulex drivers for Windows Server 2003, Windows Server 2008 and Windows Server 2008 R2

Introduction.............................................................................................................. 1
Important Considerations......................................................................................... 2
New in This Release ......................................................................................... 2
Minimum Software Requirements...................................................................... 2
Changing Driver Types...................................................................................... 2
Storport Miniport Driver Information ......................................................................... 2
FC and FCoE Driver .......................................................................................... 2
iSCSI Driver ...................................................................................................... 3
NDIS Miniport Ethernet (NIC) Driver.................................................................. 3
Driver Kit Installer Overview .................................................................................... 4
Files Installed by the Driver Kit Installer............................................................. 4
AutoPilot Installer Overview..................................................................................... 5
AutoPilot Installer Features ............................................................................... 5
Text-Only Installation ......................................................................................... 5
Installing the Driver Kit............................................................................................. 6
Starting Installers from a Command Prompt or Script .............................................. 6
Running a Software Installation Interactively ........................................................... 6
Hardware-First Installation or Driver and Utility Update ..................................... 8
Software-First Installation ................................................................................ 10
Utility-Only Update .......................................................................................... 10
Diagnostics...................................................................................................... 12
Performing an Unattended Installation................................................................... 12
Driver Kit Installer Command Line Parameters ...................................................... 13
Configuring an AutoPilot Installer Kit ..................................................................... 14
AutoPilot Installer Command Line Parameters ................................................ 15
Command Line Parameter Settings .......................................................... 15
Configuration File Location ....................................................................... 16
Software Configuration Parameters .......................................................... 17
AutoPilot Configuration File ............................................................................. 20
Configuration Identification [AUTOPILOT.ID]............................................. 21
Software Configuration [AUTOPILOT.CONFIG] ........................................ 21
Configuration Prompts/Vendor-Specific Questions
[STORPORT.CONFIGURATION] .............................................................. 21
QFE Checks [STORPORT.QFES] ............................................................. 23
Setting Up FC Driver Parameters [STORPORT.PARAMS] ........................ 23
Setting Up System Parameters [SYSTEM.PARAMS]................................ 23
AutoPilot Installer Exit Codes .......................................................................... 24
AutoPilot Installer Installation Reports....................................................... 25
Command Script Example......................................................................... 25
Manual Installation and Updating Procedures ....................................................... 27
Manually Installing or Updating the Emulex Protocol Drivers .......................... 27
Installing the Emulex PLUS (ElxPlus) Driver for the First Time ................. 27
Updating the Emulex PLUS (ElxPlus) Driver ............................................. 28
Installing or Updating the FC Storport Miniport Driver ............................... 28
Installing or Updating the iSCSI Driver ...................................................... 29
Installing or Updating the NIC Driver ......................................................... 30
Installing the Driver Utilities ............................................................................. 31
OneCommand Manager Application Web Launch Procedures .............................. 31

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for Emulex

Model

Emulex OCe10102

Description

Quick Installation Manual

Information

Windows 2003-2008-2008 R2

Operating System

Manual

Version

Ethernet (driver version 2.101.374.0)

Size Driver

465KB

File Name

driver_quick_install.pdf

Observations

This driver supports FCoE, iSCSI and Ethernet adapters as well as FC adapters.
Qualification:
Microsoft currently does not offer an FCoE WHQL "Certified for Windows" logo program. When the Storport Miniport driver is used with a standard Fibre Channel HBA, the driver is qualified for the "Certified for Windows" logo program. When the Storport MiniPort driver is used with an FCoE CNA, the driver is considered "unclassified" by Microsoft. In both cases, the Storport Miniport drivers are digitally signed by Microsoft and will be recognized by Windows Sever 2003, Windows Server 2008 and Windows Server 2008 R2.
Note
On FC and FCoE adapters, for Windows Server 2003, SP2 and the KB932755 update to the Microsoft Storport driver are required. KB945119 is recommended. The Storport KB update must be applied before the Emulex Storport Miniport driver can be installed.
Tested Architectures:
x86
x64
IA64 (FC only)
AutoPilot Installer for Windows Server 2003, Windows Server 2008 and Windows Server 2008 R2

Introduction..............................................................................................................1
Prerequisites.....................................................................................................2
Changing Driver Types......................................................................................2
Driver Kit Installer Overview..............................................................................3
AutoPilot Installer Overview...............................................................................3
Text-Only Installation Overview.........................................................................3
Installing the Driver Kit.............................................................................................3
AutoPilot Installation Procedures.............................................................................4
Running a Software Installation Interactively.....................................................4
Hardware-First Installation or Driver and Utility Update.....................................6
Software-First Installation..................................................................................8
Utility-Only Update............................................................................................9
AutoPilot Installer Diagnostics...............................................................................10
If Installation Fails...........................................................................................10

Introduction
AutoPilot Installer® for Emulex® Storport Miniport and NDIS Miniport drivers provides installation options
that include simple installations with a few mouse clicks to custom unattended installations that use
predefined script files and text-only installations. AutoPilot Installer is included with Emulex drivers and
utilities in Windows executable files (driver kit installers) that you can download from the Emulex Web
site.
There are two types of driver kits that can install the Emulex drivers and utilities:
• Full Installation Driver kit (full driver kit) - Includes the Emulex protocol drivers for Fibre Channel
(FC), Fibre Channel over Ethernet (FCoE), iSCSI, and Ethernet and the complete
OneCommand ManagerTM application, including a Graphical User Interface (GUI) and a
Command Line Interface (CLI). The full driver kit also provides an option to create AutoPilot
Installer kits that you can customize and distribute on your network. Although the full driver kit
will not install on the Server Core installation option of Windows Server 2008 (Server Core), it
can be used to create kits for those platforms.
• Core Installation Driver kit (core driver kit) - Includes the Emulex drivers and the OneCommand
Manager application CLI, but not the OneCommand Manager application GUI. The core driver
kit is required for use with Server Core platforms. You can only customize the core driver kit on
the system where it is installed. It cannot be used to create AutoPilot Installer kits for other
platforms.
Run one of the driver kit installers to extract all of the software needed for an installation, then complete
the installation using AutoPilot Installer.

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for Emulex

Model

Emulex OCe10102

Description

OneCommand Manager User Manual

Information

Windows 2003-2008-2008 R2

Operating System

Manual

Version

FC and FCoE (driver version 2.30.016)

Size Driver

5.4MB

File Name

onecommand.pdf

Observations

Note
This driver supports FCoE, iSCSI and Ethernet adapters as well as FC adapters.
Qualification:
Microsoft currently does not offer an FCoE WHQL "Certified for Windows" logo program. When the Storport Miniport driver is used with a standard Fibre Channel HBA, the driver is qualified for the "Certified for Windows" logo program. When the Storport MiniPort driver is used with an FCoE CNA, the driver is considered "unclassified" by Microsoft. In both cases, the Storport Miniport drivers are digitally signed by Microsoft and will be recognized by Windows Sever 2003, Windows Server 2008 and Windows Server 2008 R2.
Note
On FC and FCoE adapters, for Windows Server 2003, SP2 and the KB932755 update to the Microsoft Storport driver are required. KB945119 is recommended. The Storport KB update must be applied before the Emulex Storport Miniport driver can be installed.
Tested Architectures:
x86
x64
IA64 (FC only)
Manual for OneCommand Manager Application Version 5.0 (5.48 MB)

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for Emulex

Model

Emulex OCe10102

Description

OneCommand Manager Release Notes for Windows

Information

Windows 2003-2008-2008 R2

Operating System

Manual

Version

Ethernet (driver version 2.101.374.0)

Size Driver

62KB

File Name

windows_release_notes.pdf

Observations

This driver supports FCoE, iSCSI and Ethernet adapters as well as FC adapters.
Qualification:
Microsoft currently does not offer an FCoE WHQL "Certified for Windows" logo program. When the Storport Miniport driver is used with a standard Fibre Channel HBA, the driver is qualified for the "Certified for Windows" logo program. When the Storport MiniPort driver is used with an FCoE CNA, the driver is considered "unclassified" by Microsoft. In both cases, the Storport Miniport drivers are digitally signed by Microsoft and will be recognized by Windows Sever 2003, Windows Server 2008 and Windows Server 2008 R2.
Note
On FC and FCoE adapters, for Windows Server 2003, SP2 and the KB932755 update to the Microsoft Storport driver are required. KB945119 is recommended. The Storport KB update must be applied before the Emulex Storport Miniport driver can be installed.
Tested Architectures:
x86
x64
IA64 (FC only)
OneCommand Manager version 5.0

Release Notes
Date: September 2009
Product: HBAnyware® Utility and the Windows Drivers
Version: 4.1
This document describes the known issues associated with this utility build release. For the latest product
documentation, go to www.emulex.com. If you have any questions or require additional information, contact an
authorized Emulex Corporation technical representative.
New Features in HBAnyware Utility Version 4.1
1. Designed for adapter FCoE Initialization Protocol (FIP), subject to subsequent industry testing.
2. Supports CIM interface (operational name, target node WWN and flash contents program ID) for
VMware ESX 4i and VMware ESX 4.0 COS.
3. Virtual port and virtual machine mapping information is displayed.
New Resolved Issues in HBAnyware Utility Version 4.1
1. New - HBAnyware GUI is now available on the IA64 architecture.
It is no longer required to use the HbaCmd command line utility on an IA64 system.
2. All virtual port information did not appear if you manually resized the window.
3. Target information for a virtual port erroneously showed a LUN Masking tab.
4. Using HbaCmd, the change World Wide Name function did not check for physical targets for all inband
ports.
5. Using HbaCmd, the help message for the setauthconfig function erroneously stated that accepted values
were between 0 and 5. The accepted values are between 1 and 5.
6. Using HTTPS, a port number was not used for some functions if the restricthttptoloopback parameter
was set to false.
7. The internal and external loopback diagnostic tests were not available for LP21000 and LP21002
adapters.
Known Issues in HBAnyware Utility Version 4.1
1. The HBAnyware utility GUI application only launches from IBM Director version 5.1.
Workaround: There is no workaround at this time.
2. On LPe1105 adapters, diagnostic beaconing is available only if the adapter does not have VPD.
Workaround: There is no workaround at this time.
3. On LPe12000 adapters, volatile WWN changes may not be supported.
Workaround: Update firmware; see the Emulex Web site for more information.
Caution: Verify the version of OEM firmware to use based on OEM qualifications and support.
4. On LP21000 and LP21002 adapters, FIP mode may need to be disabled to bring a link up.
If you have upgraded to the new CEE firmware that supports FIP and connect the port to a switch with
firmware that does not support FIP, the port’s link will be down. If you plug a loopback plug into an
adapter port with FIP disabled, the link will be down.
Workaround: Disable FIP mode on the adapter port.
5. On Windows Vista platforms, the Add Range of Hosts feature in the HBAnyware utility is not
available.
Workaround: There is no workaround at this time.
6. If the HBAnyware CIM Client is used to access a VMware ESX server, up to 127 LUNs can be
displayed in the discovery-tree (numbered 0 to 126).
Workaround: There is no workaround at this time.
7. Not all adapters may appear in the discovery-tree.
Although the HBAnyware utility provides support for LightPulse adapters that are reprogrammed with
WWPNs outside the typical Emulex range (such as HP’s Virtual Connect for Fibre Channel on the
BladeSystem c-Class platform) not all adapters appear in the discovery-tree.
Workaround: The HBAnyware utility must be deployed across all servers on the SAN, as well as any
other management console used for out-of-band management, so that all adapters appear in the
discovery-tree.
8. Multiport adapter models are represented in the HBAnyware utility discovery-tree as
multiple adapters with a single port icon.
For older mulitport HBA models, the HBAnyware utility displays each port under individual adapter icons
in the discovery-tree. Newer multiport HBA models (LP9802 or later) are represented by a single adapter
icon that branches out to multiple port icons.
Workaround: There is no workaround at this time.

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for Emulex

Model

Emulex OCe10102

Description

Driver Kit

Operating System

Windows 2003-2008-2008 R2

Version

Ethernet (driver version 2.101.374.0)

Size Driver

39.3MB

File Name

elxocm-windows-5.00.17.06-2.exe

Observations

Note
This driver supports FCoE, iSCSI and Ethernet adapters as well as FC adapters.
Qualification:
Microsoft currently does not offer an FCoE WHQL "Certified for Windows" logo program. When the Storport Miniport driver is used with a standard Fibre Channel HBA, the driver is qualified for the "Certified for Windows" logo program. When the Storport MiniPort driver is used with an FCoE CNA, the driver is considered "unclassified" by Microsoft. In both cases, the Storport Miniport drivers are digitally signed by Microsoft and will be recognized by Windows Sever 2003, Windows Server 2008 and Windows Server 2008 R2.
Note
On FC and FCoE adapters, for Windows Server 2003, SP2 and the KB932755 update to the Microsoft Storport driver are required. KB945119 is recommended. The Storport KB update must be applied before the Emulex Storport Miniport driver can be installed.
Tested Architectures:
x86
x64
IA64 (FC only)
FC/FCoE, iSCSI and Ethernet drivers and OneCommand Manager 5.0 enterprise application (39.3 MB exe file)