Available 2 files for EagleTec LM560T2
Select Files
Company
EagleTec
Categories
Networks Cards
Model
EagleTec LM560T2
Description
Drivers
Operating System
Windows 95-98-98Se-NT
Version
5.1
Size Driver
281KB
File Name
lm560t2.zip
Observations
Driver Diskette Overview Ver 5.1
for PCMCIA 10Lan + 56KModem Combo Card
TOPIC
=================================================
[1]. Diskette Contents
[2]. Installation for Microsoft Windows 95/98/2000
1.Introduction
2.Getting Started
[3]. Installation for Microsoft Windows NT 4.0
1.Introduction
2.Getting Started
3.Troubleshooting
[4]. Support Options
[5]. Copyrights, Trademarks, and Disclaimers
[1] Diskette Contents
Files Contents
------------------------------------------------------------------
\README.TXT This File
\WIN95 NDIS3.1 Driver for Windows 95
\WIN98 NDIS4 Driver for Windows 98
\WIN2000 NDIS4 Driver for Windows 2000
\NT40 NDIS4 Driver for Windows NT4.0
\LINUX Installation Guide for Linux
\MANU\MANUNCT.HTML Document for CTR21
[2] Installation for Microsoft Windows 95/98/2000
1. Introduction
Windows 95/98/2000 provides a complete "Plug n' Play" System that will
automatically recognize and configure most PC Cards.
Before inserting your LanModem PC Card, the system's PCMCIA chipset
must be enabled and functioning. The PCMCIA chipset is responsible
for controlling the systems interface for PC Cards. Please consult
the system's manual or manufacture for use with Windows 95/98/2000.
Multifunction PC Cards put a heavy demand on a system's resources.
Please resolve all system conflicts, errors, and Windows 95/98/2000 issues
before installing the LanModem.
Please have the installation media for the Windows 95/98/2000 ready for
any request for files.
2. Getting Started
With the system off, remove all PC Cards
Start/Boot Windows 95/98/2000
Remove any previous Network Setup
-Press the START button on task bar
-Select SETTINGS
-Select CONTROL PANEL
-Select NETWORK SETTINGS
-Highlight each network support entry and press REMOVE
-After all network support is removed, press OK
Insert the LanModem into one of the system's PCMCIA Slots
A "New Hardware Found" dialog box should appear, see
troubleshooting if the dialog box doesn't appear.
Select "Driver from disk provided by hardware manufacturer"
Insert the LanModem driver disk in drive A:
Company
EagleTec
Categories
Networks Cards
Model
EagleTec LM560T2
Description
Drivers
Operating System
Windows Me-2000
Size Driver
281KB
File Name
lm560t2.zip
Observations
Driver Diskette Overview Ver 5.1
for PCMCIA 10Lan + 56KModem Combo Card
TOPIC
=================================================
[1]. Diskette Contents
[2]. Installation for Microsoft Windows 95/98/2000
1.Introduction
2.Getting Started
[3]. Installation for Microsoft Windows NT 4.0
1.Introduction
2.Getting Started
3.Troubleshooting
[4]. Support Options
[5]. Copyrights, Trademarks, and Disclaimers
[1] Diskette Contents
Files Contents
------------------------------------------------------------------
\README.TXT This File
\WIN95 NDIS3.1 Driver for Windows 95
\WIN98 NDIS4 Driver for Windows 98
\WIN2000 NDIS4 Driver for Windows 2000
\NT40 NDIS4 Driver for Windows NT4.0
\LINUX Installation Guide for Linux
\MANU\MANUNCT.HTML Document for CTR21
[2] Installation for Microsoft Windows 95/98/2000
1. Introduction
Windows 95/98/2000 provides a complete "Plug n' Play" System that will
automatically recognize and configure most PC Cards.
Before inserting your LanModem PC Card, the system's PCMCIA chipset
must be enabled and functioning. The PCMCIA chipset is responsible
for controlling the systems interface for PC Cards. Please consult
the system's manual or manufacture for use with Windows 95/98/2000.
Multifunction PC Cards put a heavy demand on a system's resources.
Please resolve all system conflicts, errors, and Windows 95/98/2000 issues
before installing the LanModem.
Please have the installation media for the Windows 95/98/2000 ready for
any request for files.
2. Getting Started
With the system off, remove all PC Cards
Start/Boot Windows 95/98/2000
Remove any previous Network Setup
-Press the START button on task bar
-Select SETTINGS
-Select CONTROL PANEL
-Select NETWORK SETTINGS
-Highlight each network support entry and press REMOVE
-After all network support is removed, press OK
Insert the LanModem into one of the system's PCMCIA Slots
A "New Hardware Found" dialog box should appear, see
troubleshooting if the dialog box doesn't appear.
Select "Driver from disk provided by hardware manufacturer"
Insert the LanModem driver disk in drive A:
Access to Official Website EagleTec
Welcome to the HelpDrivers, driver for printers.
Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more
You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.
Do not rename the file you're downloading, it may cause installation problems.