Available 2 files for EagleTec LE100BTX2
Select Files
Company
EagleTec
Categories
Networks Cards
Model
EagleTec LE100BTX2
Description
Drivers
Operating System
Windows 95-98-98Se-NT
Version
1.10
Size Driver
517KB
File Name
100btx2.zip
Observations
Contents
--------
. What's New
. Notes on Setup
. Drivers Supported on this Drivers Disk
. Notes on using EMM386 or QEMM
. Technical Support
. Machine Specific Notes
What's New
----------
The CardBus is 32-Bit PC Card which runs with better performance than
16-Bit PC Card.
The adapter supports the AutoSense, 100BaseTX Full Duplex, 100BaseTx Half
Duplex mode, 10BaseT Full Duplex mode, and 10BaseT Half Duplex mode.
Notes on Setup
--------------
For Netware, related drivers are in driver disk's \NETWARE directory.
For Packet Driver, related drivers are in \PKTDRV directory.
For Windows NT & Windows 95, 98 & 2000, use the "Network Setup" utility
provided by windows system to install the Adapter to the system and system
will load the drivers at start up time.
After installation, simply reboot the machine to enable the CardBus
PC Card.
Drivers Supported on this release of the Drivers Disk
-----------------------------------------------------
CB102EN.EXE Enabler Driver
CB102.COM DOS/ODI Driver working with direct enabler or card service
CB102PD.COM Packet Driver working with direct enabler or card service
CB102.SYS Enhance Mode NDIS Driver for Windows 95/98/2000 and
Windows NT.
Notes on using EMM386 or QEMM
-----------------------------
If your computer's CONFIG.SYS file has the EMM386.EXE command line,
please make sure the memory range D000-D7FF is excluded.
Because the Card Services need this range to allocate resources for
the adapter.
*** Example command line ***
-------------------------------------------
DEVICE=C:\DOS\EMM386.EXE NOEMS X=D000-D7FF
Technical Support
-----------------
If you still cannot get the PCMCIA Card working properly, our
technical experts are always ready to help. Please be at your
computer, have the PCMCIA Card, Drivers Disk, and the following
information available:
* The exact text of any error message displayed on your screen
* The type of computer
* The type of network
* The detail content of the CONFIG.SYS and AUTOEXEC.BAT files for DOS
Company
EagleTec
Categories
Networks Cards
Model
EagleTec LE100BTX2
Description
Drivers
Operating System
Windows Me-2000
Size Driver
518KB
File Name
le100btx2.zip
Observations
Contents
--------
. What's New
. Notes on Setup
. Drivers Supported on this Drivers Disk
. Notes on using EMM386 or QEMM
. Technical Support
. Machine Specific Notes
What's New
----------
The CardBus is 32-Bit PC Card which runs with better performance than
16-Bit PC Card.
The adapter supports the AutoSense, 100BaseTX Full Duplex, 100BaseTx Half
Duplex mode, 10BaseT Full Duplex mode, and 10BaseT Half Duplex mode.
Notes on Setup
--------------
For Netware, related drivers are in driver disk's \NETWARE directory.
For Packet Driver, related drivers are in \PKTDRV directory.
For Windows NT & Windows 95, 98 & 2000, use the "Network Setup" utility
provided by windows system to install the Adapter to the system and system
will load the drivers at start up time.
After installation, simply reboot the machine to enable the CardBus
PC Card.
Drivers Supported on this release of the Drivers Disk
-----------------------------------------------------
CB102EN.EXE Enabler Driver
CB102.COM DOS/ODI Driver working with direct enabler or card service
CB102PD.COM Packet Driver working with direct enabler or card service
CB102.SYS Enhance Mode NDIS Driver for Windows 95/98/2000 and
Windows NT.
Notes on using EMM386 or QEMM
-----------------------------
If your computer's CONFIG.SYS file has the EMM386.EXE command line,
please make sure the memory range D000-D7FF is excluded.
Because the Card Services need this range to allocate resources for
the adapter.
*** Example command line ***
-------------------------------------------
DEVICE=C:\DOS\EMM386.EXE NOEMS X=D000-D7FF
Technical Support
-----------------
If you still cannot get the PCMCIA Card working properly, our
technical experts are always ready to help. Please be at your
computer, have the PCMCIA Card, Drivers Disk, and the following
information available:
* The exact text of any error message displayed on your screen
* The type of computer
* The type of network
* The detail content of the CONFIG.SYS and AUTOEXEC.BAT files for DOS
Access to Official Website EagleTec
Welcome to the HelpDrivers, driver for printers.
Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more
You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.
Do not rename the file you're downloading, it may cause installation problems.