EagleTec LE100BT Networks Cards

Company

EagleTec

Categories

Networks Cards

Model

EagleTec LE100BT

Description

Drivers

Operating System

Windows 95-98-98Se-NT

Version

1.04

Size Driver

394KB

File Name

le100bt.zip

Observations

CONTENTS

1. Notes on Setup
2. Install PCMCIA Software manually
3. Drivers Supported on this Drivers Disk
4. Notes on using EMM386 or QEMM
5. Technical Support
1. Notes on Setup
==============

For Novell, Lan Manager & Packet Driver, first insert the "Drivers Disk"
into drive A, and type INSTALL at the A drive command prompt.
The Installation program will copy files to the destination directory and
modify your related files e.g. CONFIG.SYS & NET.CFG, automatically.

C:\> A:
A:\> INSTALL

For Windows for Workgroup, Windows NT & Windows 95, use the "Network Setup"
utility provided by windows system to install the PCMCIA Fast Ethernet
Adapter to the system and system will load the drivers at start up time.

After installation, simply reboot the machine to enable PCMCIA Fast Ethernet
Card.
2. Install PCMCIA Software Manually
================================

The automatical Installation Software has been carefully designed to detect
some combination of hardware and software already installed on your PC, and
setup your PC to enable the PCMCIA Fast Ethernet card. If for any reason the
Installation Software failed to complete. You can follow the few simple
steps to copy the enabler from the Drivers Disk onto your PC.

1. If you have Windows for Workgroup, Windows NT or Windows 95, follow the
instructions for installing PCMCIA Card in your system manual.

2. Determine if any third party generic enabler has been installed on your PC.
You identify this by a search through the CONFIG.SYS file for the following
lines:

Vendor Device Loaded in CONFIG.SYS
--------------- -------------------------------
Awards Software DEVICE=C:\CARDWARE\PCENABLE.EXE
System Soft DEVICE=C:\CARDSOFT\CARDID.EXE
Phoenix DEVICE=C:\PCMPLUS\PCMSCD.EXE

If one of them exist in your CONFIG.SYS, then you can use it to enable the
PCMCIA Fast Ethernet Card. Follow the PCMCIA installation instruction in
the manual that come with your PC.

3. If you decide to use accompanied Enabler, or if the generic enabler
does not support the PCMCIA Fast Ethernet Card, follow Steps 4 below.

4. Insert Driver Disk in drive A:.

5. Type C: at the command prompt.

6. Type MD ENABLER to make a new directory.

7. Type COPY A:\ENABLER\*.* C:\ENABLER to copy the enabler to your directory.

8. Modify the PATH= statement in your AUTOEXEC.BAT to include path C:\ENABLER.
Change From PATH=
To PATH=;C:\ENABLER

9. Using LANEN.EXE to enable the PCMCIA card no matter wheher your PC has
loaded Card Service or not.

Company

EagleTec

Categories

Networks Cards

Model

EagleTec LE100BT

Description

Fast EtherNet 16bits PC Card

Operating System

Windows Me-2000

Size Driver

424KB

File Name

fe1200.exe

Observations

CONTENTS

1. Notes on Setup
2. Install PCMCIA Software manually
3. Drivers Supported on this Drivers Disk
4. Notes on using EMM386 or QEMM
5. Technical Support
1. Notes on Setup
==============

For DOS mode driver Novell, Lan Manager & Packet Driver, first insert the
"Drivers Disk" into drive A, and type INSTALL at the A drive command prompt.
The Installation program will copy files to the destination directory and
modify your related files e.g. CONFIG.SYS & NET.CFG, automatically.

C:\> A:
A:\> INSTALL

For Windows for Workgroup, Windows NT & Windows 95, use the "Network Setup"
utility provided by windows system to install the PCMCIA Fast Ethernet
Adapter to the system and system will load the drivers at start up time.

After installation, simply reboot the machine to enable PCMCIA Fast Ethernet
Card.
2. Install PCMCIA Software Manually
================================

The automatical Installation Software has been carefully designed to detect
some combination of hardware and software already installed on your PC, and
setup your PC to enable the PCMCIA Fast Ethernet card. If for any reason the
Installation Software failed to complete. You can follow the few simple
steps to copy the enabler from the Drivers Disk onto your PC.

1. If you have Windows for Workgroup, Windows NT or Windows 95, follow the
instructions for installing PCMCIA Card in your system manual.

2. Determine if any third party generic enabler has been installed on your PC.
You identify this by a search through the CONFIG.SYS file for the following
lines:

Vendor Device Loaded in CONFIG.SYS
--------------- -------------------------------
Awards Software DEVICE=C:\CARDWARE\PCENABLE.EXE
System Soft DEVICE=C:\CARDSOFT\CARDID.EXE
Phoenix DEVICE=C:\PCMPLUS\PCMSCD.EXE

If one of them exist in your CONFIG.SYS, then you can use it to enable the
PCMCIA Fast Ethernet Card. Follow the PCMCIA installation instruction in
the manual that come with your PC.

3. If you decide to use accompanied Enabler, or if the generic enabler
does not support the PCMCIA Fast Ethernet Card, follow Steps 4 below.

4. Insert Driver Disk in drive A:.

5. Type C: at the command prompt.

6. Type MD ENABLER to make a new directory.

7. Type COPY A:\ENABLER\*.* C:\ENABLER to copy the enabler to your directory.

8. Modify the PATH= statement in your AUTOEXEC.BAT to include path C:\ENABLER.
Change From PATH=
To PATH=;C:\ENABLER

9. Using LANEN.EXE to enable the PCMCIA card no matter wheher your PC has
loaded Card Service or not.

Access to Official Website EagleTec

Home English Drivers English

Welcome to the HelpDrivers, driver for printers.

Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more

You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.

Do not rename the file you're downloading, it may cause installation problems.

Available 3 files for EagleTec LE100BT

Select Files