Available 10 files for D-Link DWL-G122 Revision C1

Company

D-Link

Categories

Networks Cards

Model

D-Link DWL-G122 Revision C1

Description

802.11a/g Tri-Mode Dualband Wireless Cardbus Adapter How to set up wireless LAN connections under Mac OS X

Information

Manual

Operating System

Manual

Size Driver

442KB

File Name

howto_setup_wireless_on_mac_os_x.pdf

Observations

Mac OS X – Wireless setup
Connecting to an existing wireless network under Mac OS X (using built-in AirPort
wireless) once wireless networking has been setup is quite straightforward –
simply click on the icon on the menu bar along the top (see highlight in
screenshot) and select the network you wish to connect to. Mac OS will list all
networks detected within range. If the network has security (WEP/WPA) enabled,
it will pop up a dialog box to enter the necessary settings.

To set up wireless networking initially, go to the Apple Menu and select System
Preferences (highlighted in screenshot). Below is a screenshot of the security
prompt when connecting to a secured network.

If using AirPort, configuration is found under Network; if using one of our
adapters, such as a DWL-G122, an additional icon will appear near the bottom to
configure it (see screenshot).

Double-clicking on the Network icon will take you to the screen shown on the
next page.

To configure the AirPort interface, simply double-click on that entry in the list.
This will open up another screen for further configuration. All known networks
(previously configured or currently in range) will appear in this list, and can be
edited as well as sorted in order of preference.

Clicking the TCP/IP tab will allow you to configure TCP/IP settings; you can
choose between manual configuration and DHCP. If you select DHCP, there is an
option to manually enter the IP address only, but obtain all other settings
automatically.

Company

D-Link

Categories

Networks Cards

Model

D-Link DWL-G122 Revision C1

Description

802.11a/g Tri-Mode Dualband Wireless Cardbus Adapter Manual

Information

Manual

Operating System

Manual

Size Driver

3MB

File Name

dwl-g122_manual_v100.pdf

Observations

Package Contents ................................................................................3
Introduction............................................................................................4
Features and Benefits ...........................................................................6
Wireless Basics ....................................................................................7
Installation Considerations ....................................................................8
Getting Started ......................................................................................9
Using the Configuration Utility .............................................................. 11
Networking Basics ................................................................................20
Troubleshooting .................................................................................33
Technical Specifications......................................................................36
Contacting Technical Support..............................................................38
Warranty and Registration...... ............................................................39
Warranty and Registration ...................................................................43
Contents of Package:
D-Link AirPlusTM G DWL-G122
2.4 GHz Wireless USB 2.0 Adapter
Manual on CD-ROM
Quick Installation Guide
Cradle

System Requirements:
A computer or laptop with an available USB port
Windows XP/2000/Me/98SE
At least 32MB of memory and a 300MHz processor
Properly installed and working USB Controller

Introduction
The D-Link AirPlus G DWL-G122 Wireless USB Adapter is a convenient Plug
& Play USB 2.0 solution that brings wireless networking to your laptop or desktop PC.
With transfer rates up to 54Mbps you can connect to a wireless network at
home, at the office or at any wireless hotspot. Now you can stay connected
wherever you are and wherever you go.
The DWL-G122 is Wi-Fi compliant, meaning that it can connect and interoperate
with other 802.11b or 802.11g Wi-Fi-compliant wireless routers, access points
and adapters. The DWL-G122 connects to any available USB port on a laptop
or desktop Windows and and also includes a USB cradle. With the optional
USB cradle, the DWL-G122 can be positioned virtually anywhere at a
workstation to achieve the best available wireless signal reception - whether that
workstation is in your office, on your deck or patio, by the pool, at the local
coffee shop, or in an airport terminal while waiting to board your next flight.
The adapter works with Microsoft Windows XP, Windows 2000 and other
Windows operating systems to ensure that you'll be up and running on a
wireless network in just a matter of seconds.
Using its default settings, the DWL-G122 automatically connects to other
D-Link Air or AirPlus wireless products as soon as it’s active.
In addition to featuring 64- or 128-bit WEP encryption, the DWL-G122 offers
the added security of WPA (Wi-Fi Protected Access) when used with other
WPA devices in a network with a RADIUS server.
For home users that will not incorporate a RADIUS server in their network, the
security for the DWL-G122, used in conjunction with other WPA-compatible
802.11 products, will still be much stronger than ever before when you use the
Pre- Shared Key mode of WPA.

Company

D-Link

Categories

Networks Cards

Model

D-Link DWL-G122 Revision C1

Description

802.11a/g Tri-Mode Dualband Wireless Cardbus Adapter Quick Installation Guide

Information

Quick Installation Guide

Operating System

Manual

Size Driver

1.5MB

File Name

dwl-g122_qig_v100.pdf

Observations

Insert the D-Link CD-ROM Into Your
Computer
Turn on the computer and
Insert the D- Link AirPlusTM G DWL-G122
Driver CD in the CD-ROM drive.
The step-by-step instructions that follow are shown
in Windows XP. The steps and screens are similar
for the other Windows operating systems.
If the CD Autorun function does not
automatically Go to Start > Run on
your computer, then type
“D:\PC\Driver\Setup.exe.” If it does
start, proceed to the next screen.

Installing the DWL-G122 Wireless USB
Adapter to Your Computer

Turn on Your Computer
When you restart your computer
this Found New Hardware
Wizard (Windows XP) screen
will appear:
For Windows Me and 98SE, this screen
may appear.

Your Installation is Complete!
After you’ve continued in Windows XP (or after the computer
restarts in the other Windows operating systems), the D-Link Air
PlusTM G DWL-G122 Configuration Utility will automatically start
and the utility icon will appear in the bottom right hand corner of the
desktop screen (systray). If this icon appears GREEN, then you
have successfully installed the DWL-G122, are connected to a
wireless network and are ready to communicate!
For Windows XP, if you wish to use the AirPlus USB Utility, please
perform the following steps.

Company

D-Link

Categories

Networks Cards

Model

D-Link DWL-G122 Revision C1

Description

802.11a/g Tri-Mode Dualband Wireless Cardbus Adapter Vista Installation Guide

Information

Manual

Operating System

Manual

Size Driver

317KB

File Name

dwl-g122_revcx_vista_installation.pdf

Observations

DWL-G122
(rev ‘C’ onwards)
How install in Microsoft VISTA
Note: The following steps are only a suggestion..
Step 1: Physically install the network adapter.
Step 2: Boot the computer. Wait for Vista to recognize the new hardware. Once it prompts
you to locate the driver. Click Locate And Install Driver Software (Recommended).
Step 3: If Vista fails to locate the drivers internally or online, it will prompt you to insert the
Driver Disk.
Step 4: Once the disk is inserted the Vista will locate the driver from the CD and install it.
Click Next to continue.
Step 5: After the drivers are installed, Vista will tell you the card has installed properly and is
ready to use. You should not have to reboot.
Alternate Installation Method:
Step 1: Click Start then Control Panel .
Step 2: Locate the Device Manager.
The control panel will be laid out one of two ways.
Step 3: Click the plus sign next to the Other Devices. This will display a sub-menu.
Step 4: Right click the Network Controller, and select Update Drivers.
Step 5: Select Search Automatically For Updated Driver Software. Ensure that the
driver CD is inserted in your machine as Vista will automatically check for it there.
Step 6: After the driver is installed, click Close.
Note: Vista requires that you use its utility for wireless management. You cannot use the DLink
utility.

Company

D-Link

Categories

Networks Cards

Model

D-Link DWL-G122 Revision C1

Description

802.11a/g Tri-Mode Dualband Wireless Cardbus Adapter How to configure the DWL-G122 under Mac OS X

Information

Manual

Operating System

Manual

Size Driver

286KB

File Name

howto_setup_g122_on_mac_os_x.pdf

Observations

Mac OS X – DWL-G122 Wireless setup
Please refer to Mac OS X wireless setup document for instructions on how to
access DWL-G122 setup. Note that the screenshots below were taken without a
DWL-G122 unit plugged in to the Mac; the utility will show details of the wireless
network it is currently connected to otherwise.
The main setup screen is shown below. After performing a scan, the list of
available wireless networks will be populated with all networks found in range.
The best way to configure settings for these is to select one, then click on “Add to
Profile” and open up the Profile Drawer.

The profile drawer simply lists all networks it currently has settings stored for. To
edit settings, highlight the one you want and click on EDIT; to connect, click on
ACTIVATE.

It is rarely necessary to change the settings under “System Configuration”, as
these should be detected when performing a site survey. The “Authentication &
Security” tab is more relevant, as this is where security settings for secure
networks are entered.

Company

D-Link

Categories

Networks Cards

Model

D-Link DWL-G122 Revision C1

Description

802.11a/g Tri-Mode Dualband Wireless Cardbus Adapter Driver/Utility

Operating System

Software

Version

3.30

Size Driver

13.3MB

File Name

dwl-g122_bxcx_driver_v3-30.zip

Observations

DWL-G122 (18ML) Windows Driver Release Note
------------------------------------------------------------------------------------------------------------
Setup Version: S0036
Utility: V3.30
Build: 62224
Windows 98/ME: 1.02.02.0000 (no pass WHQL)
Windows 2000/XP/XP64: 1.02.02.0000 (pass WHQL)
Windows VistaX86: 3.00.07.0000 (pass WHQL)
Hardware: DWL-G122 (rev.C) (Ralink RT2571w)

Date: 2008/01/02
Fix:
1. Fix bug: the tip text displays error in the D-Link icon.
2. Fix bug: If a user uses zeroconfig and click D-Link icon, the zeroconfig dialog doesn’t pop on XP64.
------------------------------------------------------------------------------------------------------------
Setup Version: S0035
Utility: V3.30
Build: 62224
Windows 98/ME: 1.02.02.0000 (no pass WHQL)
Windows 2000/XP/XP64: 1.02.02.0000 (pass WHQL)
Windows VistaX86: 3.00.07.0000 (pass WHQL)
Hardware: DWL-G122 (rev.C) (Ralink RT2571w)

Date: 2007/12/27
Fix:
1. Add XP64 drivers and support XP64.
------------------------------------------------------------------------------------------------------------
Setup Version: S0034
Utility: V3.30
Build: 62224
Windows 98/ME: 1.02.02.0000 (no pass WHQL)
Windows 2000/XP: 1.02.02.0000 (pass WHQL)
Windows VistaX86: 3.00.07.0000 (pass WHQL)
Hardware: DWL-G122 (rev.C) (Ralink RT2571w)

Date: 2007/12/26
Fix:
1. Update Vista x86 Driver versions 3.00.07.0000
2. Update Win 2000/XP Driver versions 1.02.02.0000
3. Update Win 98/ME Driver versions 1.02.02.0000
4. Update Utility to 62224

Company

D-Link

Categories

Networks Cards

Model

D-Link DWL-G122 Revision C1

Description

802.11a/g Tri-Mode Dualband Wireless Cardbus Adapter Driver/Utility

Operating System

Software

Version

3.40

Size Driver

17.5MB

File Name

dwl-g122_b1v2.04_c1.v3.40(e).zip

Observations

DWL-G122 (rev.B & rev.C) 15ML Windows Driver Release Note
Setup Version: S0045
Build: 3, 3, 3, 1218
Utility: V3.40 (E)
Windows 98/ME: 1.03.00.0000 (no pass WHQL)
Windows 2000/XP: 1.03.00.0000 (pass WHQL)
Windows XP64: 1.03.00.0000 (pass WHQL)
Windows VistaX86: 3.01.03.0000 (pass WHQL)
Windows VistaX64: 3.01.03.0000 (pass WHQL)
Hardware: DWL-G122 (rev.C) (Ralink RT2571w)
Utility: V2.04
Windows 98/ME: 2.01.00.0000 (no pass WHQL)
Windows 2000/XP: 2.00.01.0000 (pass WHQL)
Windows XP64: 2.00.03.0000 (no pass WHQL)
Hardware: DWL-G122 (rev.B) (Ralink RT2570)
Date: 2008/12/22
Fix:
1. Restore Open / 802.1x /dynamic WEP / LEAP Security.
-------------------------------------------------------------------------------------------
Setup Version: S0044
Build: 3, 3, 3, 1203
Utility: V3.40 (E)
Windows 98/ME: 1.03.00.0000 (no pass WHQL)
Windows 2000/XP: 1.03.00.0000 (pass WHQL)
Windows XP64: 1.03.00.0000 (pass WHQL)
Windows VistaX86: 3.01.03.0000 (pass WHQL)
Windows VistaX64: 3.01.03.0000 (pass WHQL)
Hardware: DWL-G122 (rev.C) (Ralink RT2571w)
Utility: V2.04
Windows 98/ME: 2.01.00.0000 (no pass WHQL)
Windows 2000/XP: 2.00.01.0000 (pass WHQL)
Windows XP64: 2.00.03.0000 (no pass WHQL)
Hardware: DWL-G122 (rev.B) (Ralink RT2570)
Date: 2008/12/12
Fix:
1. Remove security item EAP-PEAP / EAP_MD5 in WPA/WPA2.
2. Remove security item EAP-TTLS / EAP_MD5 in WPA/WPA2.
3. Remove security item EAP-TTLS / EAP_MSCHAv2 in WPA/WPA2.
4. Remove security item EAP-TTLS / EAP_GTC in WPA/WPA2.
5. Remove security item EAP-LEAP in WPA/WPA2.

Company

D-Link

Categories

Networks Cards

Model

D-Link DWL-G122 Revision C1

Description

802.11a/g Tri-Mode Dualband Wireless Cardbus Adapter Driver/Utility

Operating System

Windows 98Se-Me-2000-XP

Version

3.10

Size Driver

15.8MB

File Name

dwl-g122_revbx_v2-04_cx_v3-10.zip

Company

D-Link

Categories

Networks Cards

Model

D-Link DWL-G122 Revision C1

Description

802.11a/g Tri-Mode Dualband Wireless Cardbus Adapter Driver/Utility

Operating System

Windows Vista

Version

3.0.1

Size Driver

14.1MB

File Name

dwl-g122_revcx_vista_full_v3.01.zip

Company

D-Link

Categories

Networks Cards

Model

D-Link DWL-G122 Revision C1

Description

802.11a/g Tri-Mode Dualband Wireless Cardbus Adapter Driver

Operating System

Windows Vista

Version

3.0.1

Size Driver

219KB

File Name

dwl-g122_revcx_vista_drv_v3.0.1.zip