Available 4 files for D-Link DWL-520+

Company

D-Link

Categories

Networks Cards

Model

D-Link DWL-520+

Description

2.4GHz Enhanced Performance Wireless LAN PCI Card Quick Installation Guide

Information

Quick Installation Guide

Operating System

Manual

Size Driver

957KB

File Name

dwl-520plus_qig.pdf

Observations

Insert the D-Link CD-ROM
Into Your Computer
Turn on the computer and
Insert the D-Link AirPlus DWL-520+
Driver CD in the CD-ROM drive.
The step-by-step instructions that follow are shown in
Windows XP. The steps and screens are similar for
the other Windows operating systems.
The Install Screen will appear.
If the Autorun function on
your computer does not
automatically start, proceed to
the steps below. If it does,
proceed to Section 2.

Installing the DWL-520+ Wireless PCI
Adapter Into Your Computer
A. Make sure to off your computer and unplug the power cord. Remove the
back cover of the computer.
B. Install the DWL-520+ carefully and firmly seat it into an available PCI slot
(which is usually “white” or “cream” colored).
C. Secure the DWL-520 back panel shield with a screw.
D. Replace the computer’s cover.
E. Place the computer back in its normal position.
F. Attach the DWL-520+’s antenna to the socket on the back panel shield.

Installing the DWL-520+ Wireless PCI
Adapter Into Your Computer

Plug In & Restart Your Computer
When you restart your
computer this Found New
Hardware Wizard (Windows
XP) screen will appear:
(The D-Link driver software for this device is undergoing Windows Logo testing.
Microsoft certification is pending.)
For Windows 2000, this
Digital Signature Not Found
screen may appear after your
computer restarts.
For Windows Me and 98, after
your computer restarts, this
Systems Settings Change
screen may appear.

Your Installation is Complete!
After you’ve continued in Windows XP (or after the computer restarts in
the other Windows operating systems), the D-Link AirPlus DWL-520+
Configuration Utility will automatically start and the utility icon will appear
in the bottom right hand corner of the desktop screen (systray). If this
icon appears GREEN, then you have successfully installed the DWL-
520+, are connected to a wireless network and are ready to
communicate!

Company

D-Link

Categories

Networks Cards

Model

D-Link DWL-520+

Description

2.4GHz Enhanced Performance Wireless LAN PCI Card Users Guide

Operating System

Manual

Size Driver

5.4MB

File Name

dwl-520plus_man_v051002.zip

Observations

1. Package Contents.............................................3
2. Introduction........................................................4
3. Wireless Basics.................................................6
4. Getting Started..................................................9
5. Installing the DWL-520+..................................12
6. Using the Configuration Utility.........................15
7. Troubleshooting...............................................22
8. Networking Basics...........................................26
9. Technical Specifications..................................58
10. Contacting Technical Support..........................60
11. Limited Warranty and Registration...................61

Contents of Package:
• D-Link AirPlus DWL-520+ Enhanced 2.4GHz Wireless PCI Adapter
• Manual, QIG, and Driver on CD
• Quick Installation Guide
If any of the above items are missing, please contact your reseller.
System Requirements:
• A laptop computer with an available 32-bit PCI slot
• Windows XP, Windows 2000, Windows Me, or Windows 98
• At least 32 MB of memory and a 300 MHz processor
• An 802.11b Access Point (e.g., DWL-900AP+ for Infrastructure Mode) or another 802.11b wireless adapter (e.g., DWL-650+ for Ad-Hoc mode.)

Introduction
The D-Link AirPlus DWL-520+ Wireless PCI Adapter is an enhanced 802.11b high-performance, wireless adapter that supports high-speed wireless networking at home, at work or in public places.
Unlike most 802.11b network cards, the DWL-520+ provides speeds of up to 22 Mbps (compared to the standard 11 Mbps) when used with other D-Link AirPlus products such as the DWL-520+ Wireless PCI Adapter.
The DWL-520+ is also compatible with existing 802.11b devices such as the D-Link Air family of products including the DWL-520 Wireless PCI Adapter, the DI-714 Wireless Router/Access Point and the DWL-120 Wireless USB Adapter.
It is an ideal way to connect one laptop computer to a Wireless Local Area Network (WLAN.) After completing the steps outlined in the Quick Installation Guide (included in the package) you will have the ability to share information and resources, such as files and printers, and take full advantage of a “connected” environment for work or play!
The DWL-520+ includes software drivers for the most popular Microsoft Windows operating systems (Windows XP, Windows 2000, Windows Me, Windows 98) and can be integrated into a larger network, running, in either Ad Hoc mode (without an Access Point) or Infrastructure mode (with an Access Point.) Please take a look at our Getting Started section in this manual to see examples of typical network setups using the DWL-520+ in both Infrastructure and Ad-Hoc modes.
This manual provides a quick introduction to wireless technology and its application as it relates to networking. Take a moment to read through this manual and get acquainted with wireless technology.

Company

D-Link

Categories

Networks Cards

Model

D-Link DWL-520+

Description

2.4GHz Enhanced Performance Wireless LAN PCI Card null

Operating System

Software

Version

3.07

Size Driver

2.3MB

File Name

airplus_b_plus_driver_v3.07.zip

Company

D-Link

Categories

Networks Cards

Model

D-Link DWL-520+

Description

2.4GHz Enhanced Performance Wireless LAN PCI Card Driver/Utility

Operating System

Windows 95-98-98Se-Me-2000-XP

Version

3.06

Size Driver

2.3MB

File Name

dwl-520plus_drv_v3.06_1007_inc_utility.zip