Available 3 files for D-Link DWL-2000AP Revision Cx
Select Files
Company
D-Link
Categories
Networks Cards
Model
D-Link DWL-2000AP Revision Cx
Description
Firmware
Operating System
Firmware
Version
310
Size Driver
406KB
File Name
dwl-2000ap_fw_v3.10_nml.zip
Company
D-Link
Categories
Networks Cards
Model
D-Link DWL-2000AP Revision Cx
Description
Quick Installation Guide
Information
Quick Installation Guide
Operating System
Manual
Size Driver
2.7MB
File Name
dwl-2000ap_qig_v102.pdf
Observations
Connecting the DWL-2000AP Wireless
Access Point to Your Network
A. First, connect the power adapter to the receptor at the back panel of the
DWL-2000AP and then plug the other end of the power adapter to a wall outlet or
power strip. The Power LED will turn ON to indicate proper operation.
B. Insert one end of the cable to the Ethernet port on the back panel of the
DWL-2000AP and the other end of the cable to an Ethernet Broadband Router
(i.e., D-Link DI-604) or Switch (i.e., D-Link DSS-5+). Note: You also have the option
of connecting the DWL-2000AP directly to the computer that will be used for
configuration. The Link LED light will illuminate to indicate a proper Ethernet
connection. (Note: The Ethernet Port on the DWL-2000AP is Auto-MDI/MDIX.
Meaning you can use a straight-through or crossover-Ethernet cable to connect to
the Ethernet port on the DWL-2000AP.)
C. The DWL-G650 AirPlus Xtreme G Wireless Cardbus Adapter and the DWL-G520
AirPlus Xtreme G Wireless PCI Adapter will connect, out of the box , with the
DWL-2000AP, using their default wireless settings. Computers with 802.11b wireless
adapters can also connect to the DWL-2000AP.
Using the Setup Wizard
The logon pop-up
screen will appear.
Step 1 - Set up your new
password. You have the
option to establish a password.
Step 2 - Wireless Setup
The default wireless
settings are:
SSID = default
Channel = 6
You can change these
settings to match an
existing wireless network.
Step 3 - Encryption
The DWL-2000AP is capable of
two levels of wireless encryption
64-bit and 128-bit. By default
the encryption is disabled.
You can change the encryption
settings for more secure
wireless communication.
For additional settings or information, refer to the Advanced, Tools, or Status
tabs on the web-management interface; or to the manual located on the CD-ROM.
Company
D-Link
Categories
Networks Cards
Model
D-Link DWL-2000AP Revision Cx
Description
1.01
Information
Manual
Operating System
Manual
Size Driver
4.2MB
File Name
dwl2000ap_manual_101.pdf
Observations
Package Contents ................................................................................3
Introduction............................................................................................4
Wireless Basics ....................................................................................8
Getting Started ....................................................................................12
Using the Configuration Menu..............................................................14
Networking Basics ..............................................................................25
Troubleshooting...................................................................................40
Technical Specifications ......................................................................47
Contacting Technical Support ..............................................................50
Warranty and Registration ...................................................................51
Contents of Package:
D-Link AirPlusXTREME G DWL-2000AP
High-Speed 2.4GHz Wireless Access Point
Power Adapter-DC 5V, 2.0A
Manual and Warranty on CD
Quick Installation Guide
Ethernet Cable
If any of the above items are missing, please contact your reseller.
Note: Using a power supply with a different voltage rating than the one included with the
DWL-2000AP will cause damage and void the warranty for this product.
System Requirements for Configuration:
Computers with Windows, Macintosh, or Linux-based
operating systems with an installed Ethernet adapter
Internet Explorer Version 6.0 or Netscape Navigator
Version 6.0 and Above
Introduction
The D-Link AirPlusXtreme G DWL-2000AP High-Speed Wireless Access Point is a
draft 802.11g high-performance, wireless access point that supports high-speed wireless
networking at home, at work or in public places.
The DWL-2000AP is capable of operating in one of 4 different modes to meet your
wireless networking needs. The DWL-2000AP can operate as an Access Point; in Access
Point-to-Access Point Bridging mode; Access Point-to-Multipoint Bridging mode; or
Wireless Client mode.
The DWL-2000AP is an ideal solution for quickly creating and extending a wireless local
area network (WLAN) in offices or other workplaces, trade shows and special events.
* Available Spring 2003 as a free download
Unlike most access points, the DWL-2000AP provides data transfers at up to 54 Mbps
(compared to the standard 11 Mbps) when used with other D-Link AirPlusXtremeG
products. The 802.11g standard is backwards compatible with 802.11b products. This
means that you do not need to change your entire network to maintain connectivity. You
may sacrifice some of 802.11g?s speed when you mix 802.11b and 802.11g devices, but
you will not lose the ability to communicate when you incorporate the 802.11g standard
into your 802.11b network. You may choose to slowly change your network by gradually
replacing the 802.11b devices with 802.11g devices .
Access to Official Website D-Link
Welcome to the HelpDrivers, driver for printers.
Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more
You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.
Do not rename the file you're downloading, it may cause installation problems.