Available 3 files for D-Link DI-704
Select Files
Company
D-Link
Categories
Networks Cards
Model
D-Link DI-704
Description
Firmware version 257b3
Operating System
Firmware
Size Driver
201KB
File Name
di-704_fw_v2.57b3.bin
Company
D-Link
Categories
Networks Cards
Model
D-Link DI-704
Description
Quick Installation Guide
Information
Quick Installation Guide
Operating System
Manual
Size Driver
925KB
File Name
di-704_qig.pdf
Observations
DI-704 Quick Installation Guide
1. Hardware Installation
A. Setup LAN connection: connect an Ethernet cable (straight-through) from your
computer’s Ethernet port to one of the LAN ports of the DI-704.
B. Setup WAN connection: connect the network cable from your cable or DSL modem
to the WAN port of the DI-704. Use the cable that came with your Cable or DSL
modem. If you don’t see a link light on the WAN LED, try the other network cable.
C. Power on: connect the power cord to power inlet and turn the power switch on. The
DI-704 will automatically enter the self-test phase. When in the self-test phase, the
indicators M1 and M2 will be lit for about 5 seconds, and then M1 and M2 will flash
three times to indicate that the self-test operation has finished. Finally, the M1 will
flash continuously once per second to indicate that the DI-704 is in normal operation.
*If you are using PPPoE, begin Step 5.
If you are not using PPPoE, proceed to Step 2 below.
2. Find and Write Down Your Computer's Internet Settings
A. Open the Control Panel
B. Find and Double Click the Network Icon
C. Click the Identification Tab
D. Write down your computer name on a sheet of paper.
E. Click the Configuration Tab. It should list your network (Ethernet) adapter and the
loaded network protocols and services. Find TCP/IP for the network adapter
connected to your Cable/DSL modem.
F. Find and double click the TCP/IP setting for your Network Adapter that connects to
your cable or DSL modem. If you have not yet installed your network card, install
your network card, and then return to this step. You should see one of the following
screens:
G. Write down whether "Obtain An IP Address Automatically" or "Specify an IP
Address" is checked.
H. If Specify is checked, write down the IP Address ____. ____. ____. ____ and Subnet
Mask ____.____.____.____ on a sheet of paper.
I. If Specify is checked, find and write down your Gateway address
____.____.____.____ by clicking on the Gateway tab.
J. Find and write down your host name ___________________. It is listed under the
DNS Configuration Tab.
K. If Specify was checked, find and write down your DNS Server addresses
_____.____.____.____ , ____.____.____.____. There are normally two, but only one
is needed. In step 4 all of this information will be required to configure the DI-704
with your provider.
3. Reconfigure your TCP/IP settings
A. Click the IP Address tab. Select Obtain an IP address automatically.
B. Click the Gateway tab. Clear all of the gateway settings. Click on the OK button.
C. Disable DNS settings
Company
D-Link
Categories
Networks Cards
Model
D-Link DI-704
Description
User Manual
Information
Manual
Operating System
Manual
Size Driver
787KB
File Name
di-704_manual.pdf
Observations
Chapter 1 Introduction................................................................................. 1
1.1 Functions and Features.................................................................... 1
1.2 Packing List ..................................................................................... 2
Chapter 2 Hardware Installation.................................................................. 3
2.1. Panel Layout................................................................................... 3
2.2. Installation Requirements............................................................... 4
2.3. Procedure for Hardware Installation.............................................. 4
Chapter 3 Network Settings and Software Installation............................... 6
3.1 Make correct network settings to the computer .............................. 6
Chapter 4 Configuring The DI-704............................................................. 8
4.1 Start-up and Log in.......................................................................... 8
4.2 Status ............................................................................................... 9
4.3 Tools .............................................................................................. 10
4.4 Setup ...............................................................................................11
4.5 DHCP Server ................................................................................. 13
4.6 Virtual Server................................................................................. 14
4.7 Special AP ..................................................................................... 15
4.8 Access Control............................................................................... 16
4.9 Misc Items ..................................................................................... 17
Appendix A Console Mode....................................................................... 18
Appendix B TCP/IP Configuration for Windows 95/98 ............................ 19
B.1 Install TCP/IP protocol into your PC............................................ 19
B.2 Set TCP/IP protocol for working with the DI-704 ....................... 20
Appendix C Technical Specifications ........................................................ 24
Access to Official Website D-Link
Welcome to the HelpDrivers, driver for printers.
Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more
You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.
Do not rename the file you're downloading, it may cause installation problems.