Available 7 files for D-Link DI-304

Company

D-Link

Categories

Networks Cards

Model

D-Link DI-304

Description

ISDN Remote Access Router w/ 4-port Switch Firmware

Operating System

Firmware

Version

2.22

Size Driver

1.4MB

File Name

di-304_fw_v2-22.zip

Observations

DI-304 Patched Issue: - This version correct an ISDN connection drop issue when DI-304 is connecting to some ISDN PBX Add

Company

D-Link

Categories

Networks Cards

Model

D-Link DI-304

Description

ISDN Remote Access Router w/ 4-port Switch How to configure DI-304 for Internet access

Operating System

Manual

Size Driver

494KB

File Name

di-304_internet_setup_guide.doc

Observations

DI-304 Installation Guide for LAN – Internet

1. Introduction

This document explains how to connect to the Internet using a single user account from an Internet Service Provider. The IP network is a private network and is chosen by the installer. In the example below the private IP network is 192.168.0.xxx. The service provider may either provide you with a static IP address or more often a dynamic IP address, that is to say the IP address is assigned to the router at connection time. A local network IP address still needs to be assigned to the router.

It is assumed the network is already configured and working in terms of network adapters and drivers installed and configured.
Example Setup Configuration

DI-304 IP 192.168.0.1
PC1 IP DHCP
PC2 IP DHCP
PC3 IP DHCP
PC4 IP DHCP
Subnet for all DHCP
devices
Default Gateway 192.168.0.1
(All PC's)

The DI-304 does not have a console port for configuration purposes, you must use your windows browser to configure the DI-304. The router has a default IP address of 192.168.0.1

Ensure you PC’s are setup to receive there IP address from a DHCP server. (DI-304 in this case). You will also need to check and ensure your not running any other DHCP server in network see below.

2. Information required from the ISP.

A certain amount of information is required from your ISP. See list below.

• IP address (only for static IP address connections)
• Username
• Password
• ISDN Telephone number to dial
• DNS (consists of primary domain name controller IP, and name)


3. Router Configuration

After you have setup your PC to receive an IP address from DHCP server, it should have 192.168.0.100 as its IP address. The router will be 192.168.0.1. Use your browser and connect to the DI-304.

Company

D-Link

Categories

Networks Cards

Model

D-Link DI-304

Description

ISDN Remote Access Router w/ 4-port Switch How to configure DI-304 for LAN-toLAN connectivity

Operating System

Manual

Size Driver

213KB

File Name

di-304_lan_-_lan_setup_guide.doc

Observations

DI-304 Installation Guide for LAN – LAN Setup
To configure the router for LAN – LAN, follow the screens setting below.

The router has a default IP address of 192.168.0.1, and is setup as a DHCP server. The PC you will use to configure the DI-304 will need to be setup to receive its IP address from a DHCP server.

In the TCPIP properties of your Ethernet adapter, configure it so that the IP address is obtained automatically.

To configure the router, in your WEB browser type the IP address of the router, this will be 192.168.0.1
Select LAN-LAN Dialer Profile Setup
You can setup 16 LAN-LAN profiles, that is to say you can connect to 16 remote networks. Select an available index.
Give an appropriate name for the profile, and enable it.

Enter the dial out username and password.
If the other router dial this site, then complete the din-in settings.

For unnumbered link leave my WAN IP as 0.0.0.0. The remote gateway in the IP address of the remote router. Enter the remote network and mask.

Select call direction and idle timeout.

Select 64, 128 or BOD for this connection, and authentication for the dial out settings

Setup the parameters for dial in.
These setting may be left as default.

Company

D-Link

Categories

Networks Cards

Model

D-Link DI-304

Description

ISDN Remote Access Router w/ 4-port Switch How to configure DI-304 for remote access

Operating System

Manual

Size Driver

376KB

File Name

di-304_remote_access_setup_guide.doc

Observations

DI-304 Installation Guide for Remote Access

To configure the router for remote access, follow the screens setting below.
Select Remote Dial in Access Setup

Enable Dial In Service

Select Configuring Dial in User Account
Up to 10 Remote logins can be configured. Select the first available index.

Check the enable box. Complete the username and password details. Then click okay.

Check the status of the profile. A ‘v’ indicates that its active. Select the ‘main menu’ and return to the main menu.

Windows 2000 Workstation Dial Up Setup

Company

D-Link

Categories

Networks Cards

Model

D-Link DI-304

Description

ISDN Remote Access Router w/ 4-port Switch Datasheet

Information

Manual

Operating System

Manual

Size Driver

209KB

File Name

di-304.pdf

Observations

ISDN Router With Built-in LAN Switch for SOHO
With D-Link's SOHO router, gaining the power and speed of ISDN for the network has never been simpler and more costefficient.
This router is the complete solution for ISDN. Applications such as Internet/Intranet access, Wide Area Networking,
Electronic Commerce and Remote Network Access are just some of the benefits this device can add to the network.
High-Speed Remote Access
Remote User Support
Network Address Translator (NAT)
The router provides 1 BRI with 2 channels, each
transmitting at 64Kbps. With data compression,
transmission speed can be increased significantly, giving
the SOHO or branch office the ideal high-speed Internet
access.
The router provides remote network access through ISDN.
This allows for 2 users to login simultaneously from 2
different locations.
The router comes with Network Address Translator (NAT)
which allows the network to support a large number of
users from a single shared IP address for cost savings and
enhanced security.
Robust Security Features
4 Built-in 10/100Mbps Switched Ports
Many security features are added to provide a secured
network environment. Features such as passwords for the
system management terminal, PAP, CHAP protocols for
remote access users, and firewall filtering for access control
are provided. ( Up to 8 passwords protect accounts for remote
administrators. RADIUS provides a solution to centralizing
authentication for remote access.)
The router has 4 auto-sensing Ethernet/Fast Ethernet switched
ports built into it to provide SOHO users with an all-in-one
solution for Internet connection. The built-in LAN switch
saves users the time and trouble of purchasing and installing a
separate switch. 4 hubs, workstations and servers can directly
connect to the router.

Company

D-Link

Categories

Networks Cards

Model

D-Link DI-304

Description

ISDN Remote Access Router w/ 4-port Switch EZ Configuration Utility For firmware version 222

Operating System

Software

Version

1.0.1

Size Driver

124KB

File Name

di-304_sw_ezcfg_v1-0-1.zip

Company

D-Link

Categories

Networks Cards

Model

D-Link DI-304

Description

ISDN Remote Access Router w/ 4-port Switch Router Tools software Includes firmware upgrade utility

Operating System

Software

Version

2.01

Size Driver

355KB

File Name

di-304_sw_router_tools_v2-01.zip