Available 7 files for D-Link DFL-200

Company

D-Link

Categories

Networks Cards

Model

D-Link DFL-200

Description

NETDEFEND VPN Firewall 1600 Enterprise Firmware

Operating System

Firmware

Version

2.20.02.12

Size Driver

4MB

File Name

dfl-1600_fw_2.20.02.12.rar

Observations

D-Link NetDefendOS Release Notes
Version: 2.20.02
Platform Compatibility: DFL-210/260/800/860/1600/2500
Hardware Version: A1 (for all models), A2/A3/A4 (for DFL-210/800/1600/2500)
Date: July 10, 2008

New Features and Enhancements
1. PPPoE Interfaces.
It is now possible to configure the MTU (Maximum Transmission Unit) for PPPoE Interfaces.

1. PPTP/L2TP Client Interfaces.
It is now possible to configure the MTU (Maximum Transmission Unit) for PPTP/L2TP client Interfaces.
Problems Resolved
1. ICMP Destination Unreachable packets were not sent when UDP packets hit a Reject rule.

2. Web authentication and web server connections were not closed correctly at reconfiguration.

3. The DHCP Server did just send replies back on the receiving interface without regarding routing decisions. The DHCP Server now performs a route lookup if the reply is destined for a host address (i.e. not an IP broadcast).

4. HA setups with IDP scanning enabled, packets could be lost during a failover.

5. Some services were using the private IP in HA setups for communicating. This is now changed and the shared IP is used.

6. The DNS lookup of the IP address to a remote gateway failed under certain circumstances for IPSec interfaces.

7. The CLI command for displaying updatecenter AV/IDP update status did not show enough information. It has now been improved.

8. TCP connections could sometimes fail due to an incorrect sequence number check

Company

D-Link

Categories

Networks Cards

Model

D-Link DFL-200

Description

NETDEFEND VPN Firewall 1600 Enterprise Firmware

Operating System

Firmware

Version

2.20.03.08

Size Driver

4.1MB

File Name

dfl-1600_fw_v2.20.03.08.zip

Observations

D-Link NetDefendOS Release Notes
Version: 2.20.03
Platform Compatibility: DFL-210/260/800/860/1600/2500
Hardware Version: A1 (for all models), A2/A3/A4 (for DFL-210/800/1600/2500)
Date: Oct 21, 2008
Important Note:
For DFL-210/260/800/860, both LAN and DMZ ports cannot support to manually configure
interface speed, since IXP4NPE driver only allows auto/auto configuration. If users try to configure
the interface speed manually, the configuration will revert back to auto/auto on Web GUI as a
dummy-proof mechanism in the firmware v2.20.03.
New Features and Enhancements
1. No new features were introduced in the 2.20.03 release.
Problems Resolved
1. Fixed issue with DHCP NAK reception during initial phase of reconfiguration.
2. Fixed issue in OSPF where an LSA could be incorrectly deleted after being re-originated.
3. The interface listings for Marvell Yukon interfaces showed incorrect IRQ values.
It affects in DFL-1600 and DFL-2500 only.
4. The amount of memory used by the IDP engine was too high. The memory consumption has
now been reduced.
5. E-mails from e-mail addresses in the whitelist were blocked if they were classified as spam
messages. Now all e-mails sent from whitelisted addresses will be let through, even if they are
classified as spam.
6. Fixed leap year problem where leap year day was added to January instead of February.

Company

D-Link

Categories

Networks Cards

Model

D-Link DFL-200

Description

NETDEFEND VPN Firewall 1600 Enterprise Quick Installation Guide

Information

Quick Installation Guide

Operating System

Manual

Size Driver

3.8MB

File Name

dfl-1600_a1_qig_1-00.pdf

Observations

1.Before You Begin
1.1 Check Your Package Contents....................................................................1
2.Indentifying Components
2.1 Front View................................................................................................2
2.2 LCD Panel.................................................................................................3
2.3 LED Indicators...........................................................................................5
2.4 Default interface attribute definition..........................................................5
3.Connecting the DFL-1600
3.1 Setting up Firewall to your Network........................................................6
4.Configure DFL-1600
4.1 Configure your Computer’s IP..................................................................7
4.2 Using the Setup Wizard.............................................................................8
5.Appendix
5.1 How to Configure Static IP Manually on Microsoft Windows XP..............16
5.2 How to Configure Static IP Manually on Apple MAC OS X...........................17

Company

D-Link

Categories

Networks Cards

Model

D-Link DFL-200

Description

Network Security Firewall for Enterprise Datasheet

Information

Manual

Operating System

Manual

Size Driver

160KB

File Name

dfl-1100.pdf

Observations

Network Security Firewall for Enterprise
D-Link's DFL-1100 is an easy-to-deploy, high-capacity firewall designed for the large enterprises that require superior
price/performance. This firewall is a powerful security solution that features fault tolerance and high availability, providing
integrated Network Address Translation (NAT), Firewall, Content Filtering, IDS protection, bandwidth management as well as
Virtual Private Network (VPN) support. The DFL-1100 includes a WAN link support, a trusted LAN port, a DMZ port to
support local e-mail and web servers, and a backup port to connect to another firewall.
Multi-Function Security Application
Full Firewall Functions
High Performance IPSec VPN Support
Access Control List (ACL)
The DFL-1100 features enterprise-grade firewall functions,
including Stateful Packet Inspection (SPI), detect/drop intruding
packets, embedded VPN, a physical DMZ port, multiple-mapped
IPs and multiple virtual servers. The DFL-1100 connects your
office to a broadband modem such as cable or DSL through an
external 10/100BASE-TX WAN port.
The DFL-1100 provides complete firewall functions, including the
NAT mode, PAT (Port Address Translation) mode, Transparent
mode, Routing mode and SPI. It also supports customized policy
and virtual server configuration. Administrators can easily manage
the network through graphical statistics in a logging/monitoring
system.
The DFL-1100 is equipped with embedded VPN support, allowing
you to create multiple IPSec tunnels to remote sites/clients. IPSec
on the DFL-1100 uses strong encryption with DES, 3DES, AES
and Automated Key Management via IKE/ISAKMP. A VPN tunnel
can be activated from the DFL-1100 to a remote site or a mobile
user for secured traffic flow using triple DES encryption. This
offers users a way to confidentially access and transfer sensitive
information. Multiple VPN tunnels may be easily created without
the need to setup IKE (Internet Key Exchange) policies.
URL blocking is part of basic features offered by DFL-1100. This
function provides the benefit of limiting access to undesirable
Internet sites. Logs of real-time Internet traffic, alarms of Internet
attacks, and notice of web-browsing activities are logged and can
be reported through e-mail notification.
DFL-1100 supports Radius authentication so you can make use of
your existing Radius Server and user information.

Advanced Features for Complete Protection
High Performance With Fault Tolerance
1 DMZ Port, 1 Trusted LAN Port, 1 Backup Port
DFL-1100 provides advanced features including Content filtering,
IDS (Intrusion Detection System), Bandwidth Management for
complete solution protection to users's network. Content Filtering lets
you filter/protect your network with customized policy. Bandwidth
management guarantees bandwidth for different services.
The DFL-1100 protects your network from attacks. It can be
configured to log all attacks, locate the source IP address generating
the attack, send the attack report notification to a specified e-mail
address and establish policies to restrict incoming traffic from
specific IP address sources. Network administrators can set e-mail
addresses to receive alert message from the DFL-1100. When
intrusion events are detected, the DFL-1100 will log them and send
alert e-mail, and the administrator can check the log file on the router
to find out what happened.
The DFL-1100 can operate with up to 200,000 concurrent sessions,
providing up to 1,000 VPN tunnels for up to 1,000 mobile
telecommuters needing secure remote connections to the company
network. In addition, this firewall also provides fault tolerance
through redundancy backup with another firewall through a backup
port, providing continuous firewall protection for mission-critical
applications.
The DFL-1100 includes a LAN port that connects to your internal
office network, a backup port that connects to another firewall, and a
physical DMZ (Demilitarized Zone) port that can connect your Web,
mail or FTP servers for access from the Internet. DMZ alleviates
congested server traffic from entering the Internal network, while
protecting your other office computers from Internet attacks by
hiding them behind the firewall.

Company

D-Link

Categories

Networks Cards

Model

D-Link DFL-200

Description

Network Security Firewall for Enterprise Manual 1.01

Information

Manual

Operating System

Manual

Size Driver

2.1MB

File Name

dfl-1100_manual_v1.01.pdf

Observations

Introduction....................................................................................7
Features and Benefits ........................................................................... 7
Introduction to Firewalls ........................................................................ 7
Introduction to Local Area Networking .................................................. 8
LEDs & Physical Connections............................................................... 9
Package Contents............................................................................... 10
System Requirements......................................................................... 10
Managing D-Link DFL-1100 ......................................................... 11
Resetting the DFL1100 ...............................................................................11
Administration Settings...............................................................12
Administrative Access ......................................................................... 12
Add ping access to an interface..................................................................13
Add Admin access to an interface...............................................................13
Add Read-only access to an interface ........................................................14
Enable SNMP access to an interface .........................................................14
System ..........................................................................................15
Interfaces ............................................................................................ 15
Change IP of the LAN, DMZ or ETH4 interface..........................................15
WAN Interface Settings – Using Static IP ...................................................16
WAN Interface Settings – Using DHCP ......................................................16
WAN Interface Settings – Using PPPoE.....................................................17
WAN Interface Settings – Using PPTP.......................................................18
WAN Interface Settings – Using BigPond...................................................19
Traffic Shaping ............................................................................................19
MTU Configuration......................................................................................20
VLAN................................................................................................... 21
Add a new VLAN.........................................................................................21
Remove a VLAN .........................................................................................21
Routing................................................................................................ 22
Add a new Static Route...............................................................................23
Remove a Static Route ...............................................................................23
High Availability ................................................................................... 24

Company

D-Link

Categories

Networks Cards

Model

D-Link DFL-200

Description

54Mbps Wireless Range Extender Manual 1.00

Information

Manual

Operating System

Manual

Size Driver

688KB

File Name

dfl-1100.pdf

Company

D-Link

Categories

Networks Cards

Model

D-Link DFL-200

Description

NETDEFEND VPN Firewall 1600 Enterprise Revision A MIB file for firmware

Operating System

Software

Version

2.20

Size Driver

9KB

File Name

dfl-1600_mib_2[1].20.00.zip

Observations

DFL1600-TRAPS-MIB DEFINITIONS ::= BEGIN

IMPORTS
dfl1600MibModules, dfl1600MibConfs, dfl1600MibObjectGroups, dfl1600os
FROM DFL1600-MIB
MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
FROM SNMPv2-CONF
MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-TYPE
FROM SNMPv2-SMI
DisplayString
FROM SNMPv2-TC;

dfl1600TrapsMibModule MODULE-IDENTITY
LAST-UPDATED "200710310000Z"
ORGANIZATION "D-Link Corporation"
CONTACT-INFO
"Postal: D-Link Corporation
No. 289, Sinhu 3rd Road,
Neihu District, Taipei City 114,
Taiwan, R.O.C.
Tel: +886-2-66000123
Fax: +886-2-55509988"
DESCRIPTION
"The MIB module for D-Link DFL-1600 series product."
REVISION "200710310000Z"
DESCRIPTION
"Initial version."
::= { dfl1600MibModules 1 }

dfl1600osTraps OBJECT IDENTIFIER ::= { dfl1600os 1 }
dfl1600osTrap OBJECT IDENTIFIER ::= { dfl1600osTraps 0 }

dfl1600osTrapInfo OBJECT IDENTIFIER ::= { dfl1600osTraps 1 }

dfl1600osTrapVarSeverity OBJECT-TYPE
SYNTAX INTEGER { emergency(0), alert(1), critical(2), error(3),
warning(4), notice(5), info(6), debug(7) }
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Severity"
::= { dfl1600osTrapInfo 1 }

dfl1600osTrapVarCategory OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Category"
::= { dfl1600osTrapInfo 2 }

dfl1600osTrapVarID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"ID"
::= { dfl1600osTrapInfo 3 }

dfl1600osTrapVarEvent OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Event"
::= { dfl1600osTrapInfo 4 }