Available 3 files for D-Link DFE-551FX
Select Files
Company
D-Link
Categories
Networks Cards
Model
D-Link DFE-551FX
Description
100BaseFX (SC) Fibre PCI Ethernet Adapter Manual
Information
Manual
Operating System
Manual
Version
v1.00
Size Driver
554KB
File Name
dfe-551fx_manual_v1.00.pdf
Observations
INTRODUCTION............................................................................................................................................ 1
System Requirements.................................................................................................................................... 1
Features ......................................................................................................................................................... 1
INSTALLATION............................................................................................................................................. 3
Unpack and Inspect........................................................................................................................................ 3
Software Installation....................................................................................................................................... 3
Installing the Adapter...................................................................................................................................... 4
Connecting the Network Cable ....................................................................................................................... 4
TROUBLESHOOTING................................................................................................................................... 5
SPECIFICATIONS ......................................................................................................................................... 6
Introduction
The DFE-551FX is an IEEE 802.3u-compliant 100Mbps Fiber Ethernet PCI-Bus adapter which
implements advanced network features that include ACPI, IEEE 802.3x Flow-control, IEEE
802.1p/1Q prioritization, and VLANs.
Utilizing the plug-and-play features, the DFE-551FX adapter is fully auto-configurable for easy
installation. With one built-in SC connector operating at 1300nm-wavelength, the DFE-551FX is
able to double the network speed to 200Mbps, with distances up to 2000m in full-duplex mode.
With a PCI 32-bit data bus, the DFE-551FX can deliver high throughput without the need of the
on-board memory because its MAC controller has sufficient built-in FIFO memory for
receive/transmit packet buffering. PCI bus master architecture lowers the PCI bus overhead and
frees the CPU for other bus-intensive applications.
Company
D-Link
Categories
Networks Cards
Model
D-Link DFE-551FX
Description
100BaseFX (SC) Fibre PCI Ethernet Adapter Quick Installation Guide
Information
Quick Installation Guide
Operating System
Manual
Size Driver
932KB
File Name
dfe-551fx_qig_1.00.pdf
Observations
Installing the DFE-551FX Drivers
A. Insert the driver CD, which is included with the DFE-551FX, into the CD-ROM of your
computer.
B. Click “Install Drivers”. When prompted “Installation Complete”, click OK. If prompted to
restart (for Microsoft Windows 98/ME only), click “Yes”.
Installing the DFE-551FX into the computer’s PCI slot
A. Power off your computer and disconnect the power cord.
B. Remove the back cover of your computer. (Refer to your computer’s manual if needed.)
C. Locate an available PCI slot. PCI slots are usually white or cream coloured.
D. Remove the back plate (the small piece of metal that covers the opening for the PCI card
on the back cover that you just removed.)
E. Insert the DFE-551FX carefully and firmly into the PCI slot.
F. Secure the DFE-551FX with the screw from the back plate.
G. Replace your computer’s cover.
Finishing the Installation
A. Reconnect the power cord and power on the computer
B. If prompted to restart (for Microsoft Windows 98/ME only), click “Yes”.
Troubleshooting
1. If I’ve lost my CD, what can I do?
The CD contains software drivers and manual which can be obtained from D-Link (see
Technical Support pages). Windows 2000 or XP in most cases will automatically install the
correct drivers.
2. What do I do if the installed card does not
seem to function properly?
• Check that the card appears under
START>CONTROLPANEL>SYSTEM>HARDW
ARE>DEVICE MANAGER>NETWORK
ADAPTERS.
• If it does not appear, make sure you have
inserted the PCI card correctly or try inserting the
card into an alternative PCI slot.
• If it appears with an error “!” or “?”, remove or
uninstall the device by right clicking on the
device. Restart the computer, upon restart
Windows will redetect it. If error persists, try
removing the card and uninstalling the driver.
Repeat the installation process.
Company
D-Link
Categories
Networks Cards
Model
D-Link DFE-551FX
Description
100BaseFX (SC) Fibre PCI Ethernet Adapter Driver
Operating System
Software
Version
1.00
Size Driver
35.5MB
File Name
dfe-551fx_a1_driver_v1.00.zip
Observations
D-Link DFE-550FX PCI-Bus Fiber-optics Adapter
Contents
--------
- Introduction
- Getting Started
- Revision History
- Support Options
- Copyrights and Trademarks
Introduction
------------
Thank you for purchasing the D-Link DFE-550FX PCI-Bus Fiber-optics Adapter.
This CD-R driver support for the D-Link DFE-550FX PCI-Bus Fiber-optics Adapter
(support 100 Based-FX 32Bit PCI-Bus).
This driver contains many kinds of Network Operating System
installation . Please refer to the readme file or user's guide
if any problems for installation, or please freely contact
our technical support.
You can get latest releases of drivers from D-Link's Web site
(http://www.dlink.com). We hope our new readmes and installations
will minimize the users effort to make our products work. Should there
be further recommendations please contact the support manager at the
local D-Link Office listed bellow.
Getting Started
---------------
Auto-run program assist your ease of setup. It will configure
driver, install appropriate network drivers for popular network
operating systems on the DFE-550FX adapter.
You can operate some function through the friendly button:
1.Install Driver: It will configure driver, install appropriate
network drivers for popular network operating systems on the
DFE-530Tx+ adapter
2.View Quick Installation Guide: It will show Quick Installation Guide
for your reference.
3.View manual: It will show detail manual for your reference.
4.Install Adobe Acrobat Reader: The QIG and Manual are in Adobe .PDF format.
If you do not have a .PDF viewer install on your system, install Adobe Acrobat
Reader to view these file.
5.View Your Local D-Link Support: Please see the detail of our local branch office and
contact our customer service window.
6.Exit: You can exit Window by this button.
If the NOS (Network Operating System) you are using is not covered
by the auto-run program, please refer to the individual documentation
provided in INFO directory.
Access to Official Website D-Link
Welcome to the HelpDrivers, driver for printers.
Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more
You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.
Do not rename the file you're downloading, it may cause installation problems.