Available 1 files for Cnet CN-650Eplus

Company

Cnet

Categories

Networks Cards

Model

Cnet CN-650Eplus

Description

ISA-Bus Full-Duplex Ethernet Adapter Card

Operating System

Windows 95-98-98Se-2000-XP

Size Driver

522KB

File Name

cn650ep.zip

Observations

LAN Server 2.0 or 3.0

Introduction:
-------------
This document describes the procedure to install NDIS driver on DOS
LAN Requester and OS/2 LAN server 2.0 (or 3.0) for Realtek RTL8019
Plug&Play ethernet adapter.
Location of Driver: \NDIS\DOS\LAN_23\PNPND.DOS (for DOS LAN Services)
\NDIS\OS2\PNPND.OS2 (for OS/2 LAN Server)
Installing driver procedure on DOS LAN Requester :
--------------------------------------------------

1. Insert the IBM LAN Support Program (LSP) Version 1.30 (or 1.31)
Diskette into your floppy drive A: .

2. Type A:\dxmaid and press .

3. The screen will display the IBM logo. Press twice until
the "Environment Information" appears on screen.

4. Responds to the screen prompts, specifying the following values
for each field,use the to toggle between choices:

Configuration for this computer? Yes
Use existing configuration information? Yes
Do you have adapter option diskettes? Yes
Are you configuring for two adapters? No
Do you need 802.2 interface support? Yes

Source for LSP A: Target for new configuration C:\lsp

Make sure that the values given above are correct, then press
to store your choices.

5. Insert the Realtek RTL8019 driver diskette in floppy A,and specify
your pathname A:\NDIS\DOS\LAN_23,then press ENTER.

6. Follow screen instructions to complete the process. Simply
pressing for each screen display will select the default
options. Press until you reach the display prompting you
to insert the LSP diskette.

7. Insert the LSP diskette as prompted. Press to acknowledge
completion of the action.

8. A screen showing the current configuration detected will be
displayed. It should show the Realtek RTL8019 adapter and the
protocols already selected (i.e., "IBM IEEE 802.2" and
"IBM OS/2 NETBIOS").

9. Press . to save the new configuration. This completes the LSP
installation.

10. Save the configuration and reboot your computer.

11. Insert the DOS LAN Requester Install Diskette 1 into your floppy
drive.

12. Type A:\INSTALL

13. The IBM logo will again appear on the screen. Press to
move on to the next screen.

14. Follow screen instructions, pressing to move from
screen-to-screen until you are prompted to indicate the pathname
of the DOS LAN Requester directory (C:\DOSLAN ).

15. Specify the pathname (C:\DOSLAN is the default) for the DOS LAN
Requester directory . Then press to continue.