Available 6 files for BTC SiS 900
Select Files
Company
BTC
Categories
Networks Cards
Model
BTC SiS 900
Description
K56I-K56IW V.90 Upgrade
Operating System
Windows 2000
Size Driver
35KB
File Name
sis900w2000.zip
Company
BTC
Categories
Networks Cards
Model
BTC SiS 900
Description
K56I-K56IW V.90 Upgrade
Operating System
Windows 95
Size Driver
27KB
File Name
sis900w95.zip
Observations
Install The Driver
------------------
1. Install the card in the PCI slot and connect the cable to the network;
turn on the computer and start Windows 95. **HAVE YOUR WINDOWS 95 CD
ROM AVAILABLE** because you will need to copy some additional system
files.
2. When Windows 95 starts, a "New Hardware Found" dialog box appears
identifying the card as a "PCI Ethernet Controller". Select
"Driver from disk provided by the hardware manufacturer" then click OK.
NOTE, if the "New Hardware Found" dialog box does not appear, please
do the followings
a. After entering Windows 95, double click "My Computer".
b. Double click "Control Panel".
c. Double click "System".
d. Click the "Device Manager" tab.
e. Open "Other Devices" (with "?" icon on it).
f. Select "PCI Ethernet Controller" then click "Remove" button.
Note, if you do not see any "PCI Ethernet Controller", Windows 95
fails to detect your adapter. There may be problem with the adapter
itself or with the system BIOS.
g. Restart Windows 95 and goto step 2.
3. Insert the "SiS PCI Fast Ethernet Aapter Drivers Disk" in your floppy
drive and specify the correct path, i.e. A:\Win95 or B:\Win95,
then click OK.
4. Follow the rest screen instructions to complete the installation.
5. You should restart your computer for the changes to take effect after
the installation is complete.
Company
BTC
Categories
Networks Cards
Model
BTC SiS 900
Description
K56I-K56IW V.90 Upgrade
Operating System
Windows 98
Size Driver
26KB
File Name
sis900w98.zip
Observations
Install The Driver
------------------
1. Install the card in the PCI slot and connect the cable to the network;
turn on the computer and start Windows 98. **HAVE YOUR WINDOWS 98 CD
ROM AVAILABLE** because you will need to copy some additional system
files.
2. When Windows 98 starts, a "Add New Hardware Wizard" dialog box appears
identifying the card as a "PCI Ethernet Controller".
NOTE, if the "Add New Hardware Wizard" dialog box does not appear,
please do the followings
a. After entering Windows 98, double click "My Computer".
b. Double click "Control Panel".
c. Double click "System".
d. Click the "Device Manager" tab.
e. Open "Other Devices" (with a yellow "?" icon).
f. Select "PCI Ethernet Controller" then click "Remove" button to
remove it.
Note, if you do not see any "PCI Ethernet Controller", Windows 98
fails to detect your adapter. There may be problem with the adapter
itself or with the system BIOS.
g. Click Refresh and a "Add New Hardware Wizard" appears identifying
the card as a "PCI Ethernet Controller";
h. goto next step.
3. Click Next then select "Search for the best driver for your device
[Recommended]".
4. Click Next then enable the "Specify a location" check box; insert the
"SiS PCI Fast Ethernet Adapter Drivers Disk" in your drive A: or B:
and specify correct path, e.g. A:\WIN98 or B:\WIN98
5. Click Next then Windows 98 identifies the card as
"SiS 900 PCI Fast Ethernet Adapter"
and the "Location of driver:" is A:(or B:)\WIN98\NETOEM.INF.
6. Click Finish to let Windows 98 finishes the driver installation.
Company
BTC
Categories
Networks Cards
Model
BTC SiS 900
Description
K56I-K56IW V.90 Upgrade
Operating System
Windows Me
Size Driver
26KB
File Name
sis900wme.zip
Observations
Install The Driver
------------------
1. Install the card in the PCI slot and connect the cable to the network;
turn on the computer and start Windows ME. **HAVE YOUR WINDOWS ME CD
ROM AVAILABLE** because you will need to copy some additional system
files.
2. When Windows ME starts, a "Add New Hardware Wizard" dialog box appears
identifying the card as a "PCI Ethernet Controller".
NOTE, if the "Add New Hardware Wizard" dialog box does not appear,
please do the followings
a. After entering Windows ME, double click "My Computer".
b. Double click "Control Panel".
c. Double click "System".
d. Click the "Device Manager" tab.
e. Open "Other Devices" (with a yellow "?" icon).
f. Select "PCI Ethernet Controller" then click "Remove" button to
remove it.
Note, if you do not see any "PCI Ethernet Controller", Windows ME
fails to detect your adapter. There may be problem with the adapter
itself or with the system BIOS.
g. Click Refresh and a "Add New Hardware Wizard" appears identifying
the card as a "PCI Ethernet Controller";
h. goto next step.
3. Click Next then select "Search for the best driver for your device
[Recommended]".
4. Click Next then enable the "Specify a location" check box; insert the
"SiS PCI Fast Ethernet Adapter Drivers Disk" in your drive A: or B:
and specify correct path, e.g. A:\WINME or B:\WINME
5. Click Next then Windows ME identifies the card as
"SiS 900 PCI Fast Ethernet Adapter"
and the "Location of driver:" is A:(or B:)\WINME\NETOEM.INF.
6. Click Finish to let Windows ME finishes the driver installation.
Company
BTC
Categories
Networks Cards
Model
BTC SiS 900
Description
K56I-K56IW V.90 Upgrade
Operating System
Windows NT3.5x
Size Driver
28KB
File Name
sis900nt35.zip
Observations
To install the SiS PCI Fast Ethernet adapter and driver for use with
Windows NT 3.51, please do the following:
1. Power off your PC and install the adapter in a PCI slot in your PC.
2. Reboot the computer using the Windows NT operating system.
3. Open the Control Panel, which is found in the Main program group of the
Program Manager.
4. Start the Network control panel item.
5. Select the "Add Adapter..." option. In the list that appears, scroll to
the bottom and select the option "
Click on "Continue".
6. Insert the "SiS PCI Fast Ethernet Adapter Drivers Disk" in your floppy
drive and specify the correct path, e.g. A:\NT35 or B:\NT35, then click OK.
7. In the list that appears, double-click on one of the following:
"SiS 0900 PCI Fast Ethernet Adapter"
8. In the dialog box that appears, select the Media Type and enter the
Network address for the adapter if necessary(You can click Help for more
detailed information about these settings).
Click OK to complete this dialog box (or Cancel to terminate the
configuration without completing it).
9. Exit the Network control panel window. Windows NT asks if you wish to
reboot. You must reboot before the adapter will function properly.
Company
BTC
Categories
Networks Cards
Model
BTC SiS 900
Description
K56I-K56IW V.90 Upgrade
Operating System
Windows NT4
Size Driver
27KB
File Name
sis900nt4.zip
Observations
To install the SiS PCI Fast Ethernet adapter and driver for use with
Windows NT 4.0, please do the following:
1. Power off your PC and install the adapter in a PCI slot in your PC.
2. Reboot the computer using the Windows NT operating system.
3. Double click the Network icon in the Control Panel.
4. Select the "Adapter" tab and click "Add..."
5. Select Have Disk. Insert the "SiS PCI Fast Ethernet Adapter Drivers Disk"
in your floppy drive and specify the correct path, e.g. A:\NT40
or B:\NT40, then click OK.
6. Select one of the following models:
"SiS 0900 PCI Fast Ethernet Adapter"
then click OK.
7. In the dialog box that appears, select the Media Type and enter the
Network address for the adapter if necessary(You can click Help for more
detailed information about these settings).
Click OK to complete this dialog box (or Cancel to terminate the
configuration without completing it).
8. Exit the Network control panel window. Windows NT asks if you wish to
reboot. You must reboot before the adapter will function properly.
Access to Official Website BTC
Welcome to the HelpDrivers, driver for printers.
Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more
You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.
Do not rename the file you're downloading, it may cause installation problems.