Available 7 files for Aten PN0108
Select Files
Company
Aten
Categories
Networks Cards
Model
Aten PN0108
Description
PMonitor
Version
v1.1.101
Size Driver
1MB
File Name
pn0108_pmonitorsetup_v1.1.101.exe
Company
Aten
Categories
Networks Cards
Model
Aten PN0108
Description
Java Client
Version
v1.6.153
Size Driver
288KB
File Name
pn0108_java_client_v1.6.153.exe
Observations
Initial Release
Company
Aten
Categories
Networks Cards
Model
Aten PN0108
Description
Firmware
Operating System
Firmware Upgrade
Version
v1.8.172
Size Driver
477KB
File Name
pn0108_v1.8.172.exe
Observations
1. Enhanced the Power On Delay function. If the PN0108 shuts down, when it starts back up, it waits for the Power On Delay settings of the attached devices to expire before starting the devices.
2. Improved CC Management through the PN9108
Company
Aten
Categories
Networks Cards
Model
Aten PN0108
Description
Firmware
Operating System
Firmware Upgrade
Version
v1.6.153
Size Driver
521KB
File Name
pn0108_v1.6.153.exe
Observations
Initial Release
Company
Aten
Categories
Networks Cards
Model
Aten PN0108
Description
Firmware
Operating System
Firmware Upgrade
Version
v1.9.181
Size Driver
477KB
File Name
pn0108_v1.9.181.exe
Observations
Improved the error display
Company
Aten
Categories
Networks Cards
Model
Aten PN0108
Description
Firmware
Operating System
Firmware Upgrade
Version
v2.0.191
Size Driver
463KB
File Name
pn0108_v2.0.191.zip
Observations
Added CC2000 support by daisy chaining through PN9108 device.
Note You must use CC2000 Software v1.0.092 or higher with this release.
Company
Aten
Categories
Networks Cards
Model
Aten PN0108
Description
PMonitor Release Note
Information
Manual
Operating System
Manual
Version
v1.1.101
Size Driver
28KB
File Name
pn0108_pmonitor_v1.1.101.pdf
Observations
1. About Power Monitor
Power Monitor is a utility, which is used to monitoring power status (UPS signal). When UPS signals (Power Fail and Low
battery) are detected, this utility will shutdown Windows system safely.
This version of software is for ALTUSEN Power over the NET product.
2. Using Power Monitor
a). Install Power Monitor by executing self-extract setup program (PMonitorSetup -ALTUSEN-V1.1.101 .exe). Install
program will set Power Monitor to Windows startup folder to let system launch it automatically when system starts.
b). Power Monitor could be launched by system automatically, or by double-click shortcut icon on desktop manually too.
c). The polarity of UPS signals (both Power Fail and Low Battery) that is monitored are Positive only.
d). Default COM port for Power Monitor is COM1.
e). After Power Monitor was launched, it starts monitoring power status (via COM1) automatically. If COM1 port was
occupied by other utility, it could not start monitoring, and the dialog below will be displayed.
f). If you are using other COM port, please choose it from Option dialog.
g). If monitoring is started, monitoring icon will be displayed at task bar (right-bottom), if monitoring is stopped, nonmonitoring
icon will be displayed at task bar.
h). If the utility has already launched, and user try to execute utility again, the error dialog below will be displayed.
Monitoring icon:
Non-monitoring icon:
i). When monitoring was stopped, user can set option by double-click left button on non-monitoring icon at task bar, or
click right button on non-monitoring icon at task bar, then select “Option…” from menu. The dialog below will be
displayed. What user can set in option dialog is COM port only.
j). User can click right button on power monitor icon at task bar to choose starting or stopping monitoring.
k). When Power Monitor detected UPS signal (Power Fail and Low battery), a dialog box below will be displayed and the
utility will start system shutdown process in 5 seconds
l). About dialog
m). User can uninstall the utility by choose uninstall from Windows start menu (Start \ Program \ ATEN Power Monitor Uninstall Power Monitor) or form “Control Panel \ Add/Remove Program” in Windows, utility name is “ATEN Power
Monitor”.
Access to Official Website Aten
Welcome to the HelpDrivers, driver for printers.
Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more
You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.
Do not rename the file you're downloading, it may cause installation problems.