Accton EN1207F-TX Networks Cards

Company

Accton

Categories

Networks Cards

Model

Accton EN1207F-TX

Description

Drivers

Operating System

Windows 95-98-98Se-Me-NT4-2000

Version

V2.02

Size Driver

421KB

File Name

1207f-v202.zip

Observations

In the following description, we use the Accton EN1207F Fast
Ethernet Adapter as an example. For EN2242 Mini-PCI
adapter, the procedure is similar.

How to Config Your PCI adapter
==============================

1. Go to the PCI configuration item in BIOS setup.
2. Follow these steps to configure the PCI slot:
a). You should know which slot your adapter is plugged in to.
Look for the physical location of the slot in your PCI
motherboard.
b). Set the "this device" field to "Enable".
c). Set the "this item" field to "Master".
The EN5251 based adapter MUST be installed in an expansion
slot that supports "Bus Master". Refer to your system
documentation to determine which slots support Bus Mastering.
d). Some BIOS Setups allow you to select which interrupt line you
can use. In this case, select "INT A" for the "this item" field.
e). Select an IRQ of your choice; make sure it does not conflict
with existing IRQs in use.
d). Select the "Trigger method" by which the IRQ is assigned or
routed to the PCI slot. Choose the "level-trigger" option.
Multiple EN5251 based adapters can share the same PCI
interrupt, but all must use INTA with level-trigger mode.

3. Run the diagnostic program found in the driver diskette under DOS.
If any problem arises during the installation, contact your dealer or
Accton Technology Corporation for support.

Conflict with Microsoft EMM386
==============================

The PCI adapters can only function with the EMM386.EXE memory manager
program version 4.49 or later. You can verify its version number by
entering EMM386 at the DOS Prompt.

Do not specify the "highscan" option with the EMM386.exe statement
in your config.sys file or your system will hang.

If you run MEMMAKER and select Custom Setup, do not specify
"Aggressively scan upper memory", or it will automatically insert
the HIGHSCAN flag into the EMM386 command line. This parameter cannot
be manually removed once it's installed, doing so will cause the
extended memory manager to malfunction.

Access to Official Website Accton

Home English

Welcome to the HelpDrivers, driver for printers.

Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more

You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.

Do not rename the file you're downloading, it may cause installation problems.

Available 2 files for Accton EN1207F-TX

Select Files