Available 92 files for Hewlett Packard HP OfficeJet k60xi All-in-One
Select Files
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
Stand by mode Driver Patch
Operating System
Windows 2000
Version
N/A
Language Driver
Chinese Hong Kong
Size Driver
142KB
File Name
hpoj_usbstandby.exe
Observations
Description:
This patch is for users running Windows 2000 with a G, V, K, or PSC 700 Series OfficeJet connected to the PC by USB cable. To apply this patch, the user must have Administrator-level access rights for the PC that exhibits the symptom described below.
Symptom:
Under Windows 2000, after a PC comes out of "Stand by" or "Hibernate" mode, the OfficeJet does not reconnect. This prevents users from accessing through software the Scan and Fax functions until a reboot is performed.
What this software accomplishes:
After the PC revives from "Stand by" or "Hibernate" mode, the OfficeJet will make the proper reconnections. Scanning and Faxing functions will work normally. Some minor are also included to make the software more robust.
NOTE: This patch should be applied to K-series software version 1.16 or earlier.
Which files are upgraded by this patch:
hpoid407.sys
hpoius07.sys
For more information about Administrator-level access rights go to Windows 2000 help "adding users" or go to www.microsoft.com/windows2000
Downloading Instructions:
For Microsoft Internet Explorer users:
Click on "Download"
Choose the option "Save this program to disk."
Click OK.
You will now be prompted for the location on your hard drive where you would like to save the program. Save the program to your hard drive, making sure to note the drive and directory where the patch gets copied.
After downloading, locate and run the patch file on your hard drive, "HpOj_USBStandby.exe"
Follow the install instructions that appear on the screen.
Restart the PC to complete the installation process.
For Netscape users:
Click on "Download"
Choose the option "Save to disk."
Click OK.
You will now be prompted for the location on your hard drive where you would like to save the program. Save the program to your hard drive, making sure to note the drive and directory where the patch gets copied.
After downloading, locate the patch file on your hard drive, "HpOj_USBStandby.exe", and run it.
Follow the install instructions that appear on the screen. Restart the PC to complete the installation process.
Operating system(s): Microsoft Windows 2000
Download file size: 141.71k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
Software and Driver
Operating System
Windows 2000-XP
Version
3.10 (A.14.05.09)
Language Driver
Chinese Hong Kong
Size Driver
67MB
File Name
a140509_cht_xp.exe
Observations
There is one major new functionality of this driver as listed below:
The Parallel Port is now supported in addition to USB. This driver replaces previous versions of the HP OfficeJet K Series drivers as defined below:
For Windows XP customers this driver replaces driver Version 3.00.
Notice: If you intend to use both a HP OfficeJet K Series and HP OfficeJet G Series All-In-One device on the same PC, there is an uncommon scenario where the OfficeJet G Series will not work. All three of the following conditions must be met in order to experience this situation:
Your OfficeJet K Series has Firmware Version 4.04.
Your OfficeJet K Series is installed on the Parallel Port.
You intend to install an OfficeJet G Series device either on this same computer using a second Parallel Port or on the same Parallel Port at a later time.
If you have not met ALL of these conditions, then you will NOT experience this problem and may proceed. If you expect to encounter all these conditions in the future then do not install this driver. If you are unsure, then contact HP support for further direction.
Follow these steps to determine your HP Officejet K Series device's firmware version:
Simultaneously press and hold the [ENTER] and [Cancel] buttons (this will take two hands for most people)
Release both buttons at the same time
Wait for the "Extended Self-Test Report" to print out.
Look at the "Firmware Version" in the lower third of the page, the left hand column, about the sixth item down. Your device has firmware 4.04 if you see the "Firmware Version: OD404R" on the printout.
Operating system(s): Microsoft Windows 2000, Microsoft Windows XP
Download file size: 67.09M
.
Installation Instructions
Download the web package driver file.
Turn off the HP OfficeJet K Series device and disconnect either the USB cable or Parallel port cable.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
Uninstall the previous version of the HP driver software if any is installed. The Windows XP mini-drivers do not need to be removed.
Run the downloaded .exe file. Follow the screen directions presented during the software installation.
When the software portion of the installation is complete, you will see a "Software Copied Successfully" dialog box with a prompt to "follow the instructions on your setup poster to set up your HP OfficeJet K Series hardware". The instructions below are contained in your setup poster.
Select [Finish] on the "Software Copied Successfully" dialog.
If a request to restart your computer dialog appears, select [yes] to reboot the computer.
Turn on your HP OfficeJet K Series device, and if using USB then reconnect the USB cable between it and the computer, or if using the parallel port then reconnect the parallel port cable between it and the computer.
During the Plug & Play phase, a "Found New Hardware Wizard" dialog will appear.
Select [Next], then [Next], then [Finish] buttons to continue. On some computer it may take a few minutes to install the software.
The desktop icon will be created, and the HP system tray icon will appear in the lower-right corner of the taskbar. The HP Fax Setup Wizard or Electronic Registration will appear depending the features of your HP OfficeJet K Series device.
Complete the HP Fax Setup Wizard, if it appears.
Complete the Electronic Registration, if you have not already done it once.
When the "Congratulations!" dialog appears, select [Skip Tour], since it is not included in the web driver package.
Upon completing the software installation, enable your antivirus software.
View the Readme file or the Onscreen User Guide for further information related to the operation of this driver software. If you chose the default installation location then the Readme.html file will be located in the path:
C:\Program Files\Hewlett-Packard\AiO\hp officejet k series\Help
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
Taiwan-SOAR-12
Operating System
Windows 95-98-Me-2000
Version
1.0
Language Driver
Chinese Hong Kong
Size Driver
234.9MB
File Name
ojk60-k80.exe
Observations
Taiwan-SOAR-12
Operating system(s): Microsoft Windows 95, Microsoft Windows 98, Microsoft Windows 2000, Microsoft Windows ME
Download file size: 234.98M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
Millennium TWAIN Software Patch
Operating System
Windows Me
Version
N/A
Language Driver
Chinese Hong Kong
Size Driver
56KB
File Name
hpodsr07k.ds
Observations
NOTE:
This patch only applies to customers that are using Windows ME as their operating system.
Symptom:
The Officejet K series "acquire" text scanning feature of the Readiris software will not run.
This software provides you:
A patch file that replaces the Twain scanning file with a newer version.
Operating system(s): Microsoft Windows ME
Download file size: 56.0k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
SOAR-TW-UST-7017
Operating System
Windows NT4
Version
1
Language Driver
Chinese Hong Kong
Size Driver
234.9MB
File Name
ojk60-k80.exe
Observations
SOAR-TW-UST-7017
Operating system(s): Microsoft Windows NT 4.0
Download file size: 234.98M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
SOAR-UST-TW-10759
Operating System
Windows XP
Version
3.0
Language Driver
Chinese Hong Kong
Size Driver
67MB
File Name
a1405_04_cht_xp.exe
Observations
SOAR-UST-TW-10759
Operating system(s): Microsoft Windows XP
Download file size: 67.01M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
USB I-O Patch
Operating System
Windows 2000
Version
1.0
Language Driver
Chinese Simplified
Size Driver
742KB
File Name
usbupdate_windows2000.exe
Observations
Note: This patch is only valid for older versions of the software including versions 1.16, 1.18, and 1.31, as detailed below:
CD Version 1.16, P/N C6748-60033, SW Build A10.03.16
CD Version 1.18, P/N C6748-10003, SW Build A10.03.16
CD Version 1.31, P/N C6748-10004, SW Build A10.02.04 (Asia)
This patch cannot be used on CD Version's 3.00 or later.
Installation Instructions:
Download the file, USBUpdate_Windows2000.exe to a local drive. Make note where (in which folder) the file gets copied.
Temporarily disable any antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
In Windows Explorer (or by some equivalent means) go to the folder where USBUpdate_Windows2000.exe was copied; run the program.
Double-click on the USBUpdate_Windows2000.exe patch file to start it.
Follow the instruction dialogs that appear to install the update.
A restart is necessary after the patch is installed.
Operating system(s): Microsoft Windows 2000
Download file size: 741.51k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
USB I-O Patch
Operating System
Windows 98-Me
Version
1.0
Language Driver
Chinese Simplified
Size Driver
778KB
File Name
usbupdate_windows9x.exe
Observations
Note: This patch is only valid for older versions of the software including versions 1.16, 1.18, and 1.31, as detailed below:
CD Version 1.16, P/N C6748-60033, SW Build A10.03.16
CD Version 1.18, P/N C6748-10003, SW Build A10.03.16
CD Version 1.31, P/N C6748-10004, SW Build A10.02.04 (Asia)
This patch cannot be used on CD Version's 3.00 or later.
Installation Instructions:
Download the file, USBUpdate_Windows9x.exe to a local drive. Make note where (in which folder) the file gets copied.
Temporarily disable any antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
In Windows Explorer (or by some equivalent means) go to the folder where USBUpdate_Windows9x.exe was copied; run the program.
Double-click on the USBUpdate_Windows9x.exe patch file to start it.
Follow the instruction dialogs that appear to install the update.
A restart is necessary after the patch is installed.
Operating system(s): Microsoft Windows 98, Microsoft Windows ME
Download file size: 777.59k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
Stand by mode Driver Patch
Operating System
Windows 2000
Version
N/A
Language Driver
Chinese Traditional
Size Driver
142KB
File Name
hpoj_usbstandby.exe
Observations
Description:
This patch is for users running Windows 2000 with a G, V, K, or PSC 700 Series OfficeJet connected to the PC by USB cable. To apply this patch, the user must have Administrator-level access rights for the PC that exhibits the symptom described below.
Symptom:
Under Windows 2000, after a PC comes out of "Stand by" or "Hibernate" mode, the OfficeJet does not reconnect. This prevents users from accessing through software the Scan and Fax functions until a reboot is performed.
What this software accomplishes:
After the PC revives from "Stand by" or "Hibernate" mode, the OfficeJet will make the proper reconnections. Scanning and Faxing functions will work normally. Some minor are also included to make the software more robust.
NOTE: This patch should be applied to K-series software version 1.16 or earlier.
Which files are upgraded by this patch:
hpoid407.sys
hpoius07.sys
For more information about Administrator-level access rights go to Windows 2000 help "adding users" or go to www.microsoft.com/windows2000
Downloading Instructions:
For Microsoft Internet Explorer users:
Click on "Download"
Choose the option "Save this program to disk."
Click OK.
You will now be prompted for the location on your hard drive where you would like to save the program. Save the program to your hard drive, making sure to note the drive and directory where the patch gets copied.
After downloading, locate and run the patch file on your hard drive, "HpOj_USBStandby.exe"
Follow the install instructions that appear on the screen.
Restart the PC to complete the installation process.
For Netscape users:
Click on "Download"
Choose the option "Save to disk."
Click OK.
You will now be prompted for the location on your hard drive where you would like to save the program. Save the program to your hard drive, making sure to note the drive and directory where the patch gets copied.
After downloading, locate the patch file on your hard drive, "HpOj_USBStandby.exe", and run it.
Follow the install instructions that appear on the screen. Restart the PC to complete the installation process.
Operating system(s): Microsoft Windows 2000
Download file size: 141.71k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
Software and Driver
Operating System
Windows 2000-XP
Version
3.10 (A.14.05.09)
Language Driver
Chinese Traditional
Size Driver
67MB
File Name
a140509_cht_xp.exe
Observations
There is one major new functionality of this driver as listed below:
The Parallel Port is now supported in addition to USB. This driver replaces previous versions of the HP OfficeJet K Series drivers as defined below:
For Windows XP customers this driver replaces driver Version 3.00.
Notice: If you intend to use both a HP OfficeJet K Series and HP OfficeJet G Series All-In-One device on the same PC, there is an uncommon scenario where the OfficeJet G Series will not work. All three of the following conditions must be met in order to experience this situation:
Your OfficeJet K Series has Firmware Version 4.04.
Your OfficeJet K Series is installed on the Parallel Port.
You intend to install an OfficeJet G Series device either on this same computer using a second Parallel Port or on the same Parallel Port at a later time.
If you have not met ALL of these conditions, then you will NOT experience this problem and may proceed. If you expect to encounter all these conditions in the future then do not install this driver. If you are unsure, then contact HP support for further direction.
Follow these steps to determine your HP Officejet K Series device's firmware version:
Simultaneously press and hold the [ENTER] and [Cancel] buttons (this will take two hands for most people)
Release both buttons at the same time
Wait for the "Extended Self-Test Report" to print out.
Look at the "Firmware Version" in the lower third of the page, the left hand column, about the sixth item down. Your device has firmware 4.04 if you see the "Firmware Version: OD404R" on the printout.
Operating system(s): Microsoft Windows 2000, Microsoft Windows XP
Download file size: 67.09M
.
Installation Instructions
Download the web package driver file.
Turn off the HP OfficeJet K Series device and disconnect either the USB cable or Parallel port cable.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
Uninstall the previous version of the HP driver software if any is installed. The Windows XP mini-drivers do not need to be removed.
Run the downloaded .exe file. Follow the screen directions presented during the software installation.
When the software portion of the installation is complete, you will see a "Software Copied Successfully" dialog box with a prompt to "follow the instructions on your setup poster to set up your HP OfficeJet K Series hardware". The instructions below are contained in your setup poster.
Select [Finish] on the "Software Copied Successfully" dialog.
If a request to restart your computer dialog appears, select [yes] to reboot the computer.
Turn on your HP OfficeJet K Series device, and if using USB then reconnect the USB cable between it and the computer, or if using the parallel port then reconnect the parallel port cable between it and the computer.
During the Plug & Play phase, a "Found New Hardware Wizard" dialog will appear.
Select [Next], then [Next], then [Finish] buttons to continue. On some computer it may take a few minutes to install the software.
The desktop icon will be created, and the HP system tray icon will appear in the lower-right corner of the taskbar. The HP Fax Setup Wizard or Electronic Registration will appear depending the features of your HP OfficeJet K Series device.
Complete the HP Fax Setup Wizard, if it appears.
Complete the Electronic Registration, if you have not already done it once.
When the "Congratulations!" dialog appears, select [Skip Tour], since it is not included in the web driver package.
Upon completing the software installation, enable your antivirus software.
View the Readme file or the Onscreen User Guide for further information related to the operation of this driver software. If you chose the default installation location then the Readme.html file will be located in the path:
C:\Program Files\Hewlett-Packard\AiO\hp officejet k series\Help
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
Taiwan-SOAR-12
Operating System
Windows 95-98-Me-2000
Version
1.0
Language Driver
Chinese Traditional
Size Driver
234.9MB
File Name
ojk60-k80.exe
Observations
Taiwan-SOAR-12
Operating system(s): Microsoft Windows 95, Microsoft Windows 98, Microsoft Windows 2000, Microsoft Windows ME
Download file size: 234.98M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
Millennium TWAIN Software Patch
Operating System
Windows Me
Version
N/A
Language Driver
Chinese Traditional
Size Driver
56KB
File Name
hpodsr07k.ds
Observations
NOTE:
This patch only applies to customers that are using Windows ME as their operating system.
Symptom:
The Officejet K series "acquire" text scanning feature of the Readiris software will not run.
This software provides you:
A patch file that replaces the Twain scanning file with a newer version.
Operating system(s): Microsoft Windows ME
Download file size: 56.0k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
SOAR-TW-UST-7017
Operating System
Windows NT4
Version
1
Language Driver
Chinese Traditional
Size Driver
234.9MB
File Name
ojk60-k80.exe
Observations
SOAR-TW-UST-7017
Operating system(s): Microsoft Windows NT 4.0
Download file size: 234.98M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
SOAR-UST-TW-10759
Operating System
Windows XP
Version
3.0
Language Driver
Chinese Traditional
Size Driver
67MB
File Name
a1405_04_cht_xp.exe
Observations
SOAR-UST-TW-10759
Operating system(s): Microsoft Windows XP
Download file size: 67.01M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
Stand by mode Driver Patch
Operating System
Windows 2000
Version
N/A
Language Driver
Dutch
Size Driver
142KB
File Name
hpoj_usbstandby.exe
Observations
Description:
This patch is for users running Windows 2000 with a G, V, K, or PSC 700 Series OfficeJet connected to the PC by USB cable. To apply this patch, the user must have Administrator-level access rights for the PC that exhibits the symptom described below.
Symptom:
Under Windows 2000, after a PC comes out of "Stand by" or "Hibernate" mode, the OfficeJet does not reconnect. This prevents users from accessing through software the Scan and Fax functions until a reboot is performed.
What this software accomplishes:
After the PC revives from "Stand by" or "Hibernate" mode, the OfficeJet will make the proper reconnections. Scanning and Faxing functions will work normally. Some minor are also included to make the software more robust.
NOTE: This patch should be applied to K-series software version 1.16 or earlier.
Which files are upgraded by this patch:
hpoid407.sys
hpoius07.sys
For more information about Administrator-level access rights go to Windows 2000 help "adding users" or go to www.microsoft.com/windows2000
Downloading Instructions:
For Microsoft Internet Explorer users:
Click on "Download"
Choose the option "Save this program to disk."
Click OK.
You will now be prompted for the location on your hard drive where you would like to save the program. Save the program to your hard drive, making sure to note the drive and directory where the patch gets copied.
After downloading, locate and run the patch file on your hard drive, "HpOj_USBStandby.exe"
Follow the install instructions that appear on the screen.
Restart the PC to complete the installation process.
For Netscape users:
Click on "Download"
Choose the option "Save to disk."
Click OK.
You will now be prompted for the location on your hard drive where you would like to save the program. Save the program to your hard drive, making sure to note the drive and directory where the patch gets copied.
After downloading, locate the patch file on your hard drive, "HpOj_USBStandby.exe", and run it.
Follow the install instructions that appear on the screen. Restart the PC to complete the installation process.
Operating system(s): Microsoft Windows 2000
Download file size: 141.71k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
USB I-O Patch
Operating System
Windows 2000
Version
1.0
Language Driver
Dutch
Size Driver
742KB
File Name
usbupdate_windows2000.exe
Observations
Note: This patch is only valid for older versions of the software including versions 1.16, 1.18, and 1.31, as detailed below:
CD Version 1.16, P/N C6748-60033, SW Build A10.03.16
CD Version 1.18, P/N C6748-10003, SW Build A10.03.16
CD Version 1.31, P/N C6748-10004, SW Build A10.02.04 (Asia)
This patch cannot be used on CD Version's 3.00 or later.
Installation Instructions:
Download the file, USBUpdate_Windows2000.exe to a local drive. Make note where (in which folder) the file gets copied.
Temporarily disable any antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
In Windows Explorer (or by some equivalent means) go to the folder where USBUpdate_Windows2000.exe was copied; run the program.
Double-click on the USBUpdate_Windows2000.exe patch file to start it.
Follow the instruction dialogs that appear to install the update.
A restart is necessary after the patch is installed.
Operating system(s): Microsoft Windows 2000
Download file size: 741.51k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
Driver Web Package for both USB and Parallel Ports
Operating System
Windows 2000
Version
3.10 (A.14.05.09)
Language Driver
Dutch
Size Driver
67.4MB
File Name
a140509_nld_2k.exe
Observations
There is one major new functionality of this driver as listed below:
The Parallel Port is now supported in addition to USB.
This driver replaces previous versions of the HP OfficeJet K Series drivers as defined below:
For Windows 2000 customers this driver replaces drivers Version 1.16, 1.18, 1.31, or earlier.
Notice: If you intend to use both a HP OfficeJet K Series and HP OfficeJet G Series All-In-One device on the same PC, there is an uncommon scenario where the OfficeJet G Series will not work. All three of the following conditions must be met in order to experience this situation:
Your OfficeJet K Series has Firmware Version 4.04.
Your OfficeJet K Series is installed on the Parallel Port.
You intend to install an OfficeJet G Series device either on this same computer using a second Parallel Port or on the same Parallel Port at a later time.
If you have not met ALL of these conditions, then you will NOT experience this problem and may proceed. If you expect to encounter all these conditions in the future then do not install this driver. If you are unsure, then contact HP support for further direction.
Follow these steps to determine your HP Officejet K Series device's firmware version:
Simultaneously press and hold the [ENTER] and [Cancel] buttons (this will take two hands for most people)
Release both buttons at the same time
Wait for the "Extended Self-Test Report" to print out.
Look at the "Firmware Version" in the lower third of the page, the left hand column, about the sixth item down. Your device has firmware 4.04 if you see the "Firmware Version: OD404R" on the printout.
The specific OfficeJet K Series Driver Version 3.10 Installation Instructions follow:
Download the web package driver file.
Turn off the HP Officejet device and unplug the USB cable. If using the parallel port connector it should remain connected.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
Uninstall the previously version of the software (Click Start, click All Programs, point to HP Officejet, and then click Uninstall Software)
Run the downloaded .exe file. Follow the screen directions presented during the software installation.
When the software portion of the installation is complete, you will see a "Software Copied Successfully" dialog box with a prompt to "follow the instructions on your setup poster to set up your HP OfficeJet K Series hardware". The instructions below are contained in your setup poster.
Select [Finish] on the "Software Copied Successfully" dialog.
If a request to restart your computer dialog appears, select [yes] to reboot the computer.
Turn on your HP OfficeJet K Series device, and if using USB then connect the USB cable. If using the parallel port, and the parallel port connector was not connected as instructed in step 1 above, then connect the parallel port cable and perform a second reboot of the computer now.
After the Add New Hardware dialogs, an "Install HP software" dialog will appear.
Select [Next]. NOTE: The ReadIris application and HP instant support are not included with the Web download. Wait for the HP software to start and the HP Fax Setup Wizard to appear.
Complete the HP Fax Setup Wizard, if it appears.
Complete the Electronic Registration, if you have not already done it once.
When "Congratulations!" appears, select [Skip Tour], since it is not included in the web driver package.
Upon completing the software installation, enable your antivirus software.
View the Readme file or the Onscreen User Guide for further information related to the operation of this driver software. If you chose the default installation location then the Readme.html file will be located in the path:
C:\Program Files\Hewlett-Packard\AiO\hp officejet k series\Help
Operating system(s): Microsoft Windows 2000
Download file size: 67.47M
.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
Driver
Operating System
Windows 95
Version
1.16
Language Driver
Dutch
Size Driver
40.6MB
File Name
oj746du.exe
Observations
This driver has been updated to remove the netdirect features. Other features that have been removed to reduce the driver download file size are the bundled software and the product tour.
This driver is designed for use on computers that will be connected to the OfficeJet K series from the computer's Parallel port or USB port. When installing the OfficeJet K series via a parallel port the computers ECP mode must be turned on.
Download and installation Instructions:
The Officejet K series must be turned off and the Parallel or USB cable must be unplugged from the computer before proceeding!
Download the driver software.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, multimedia applications.
Uninstall any previous versions of the Officejet K series software.
To start the software installation locate and click on the downloaded driver file you saved to your computer's hard drive.
Follow the screen directions presented during software installation.
For a successful install you will see a "Select Cable Type" screen with options for how to connect your OfficeJet K series with a parallel or USB cable.
Select a cable choice and follow the instructions for connecting the OfficeJet K series to your computer.
Upon completing the software installation enable the antivirus software.
Operating system(s): Microsoft Windows 95
Download file size: 40.68M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
Millennium TWAIN Software Patch
Operating System
Windows Me
Version
N/A
Language Driver
Dutch
Size Driver
56KB
File Name
hpodsr07k.ds
Observations
NOTE:
This patch only applies to customers that are using Windows ME as their operating system.
Symptom:
The Officejet K series "acquire" text scanning feature of the Readiris software will not run.
This software provides you:
A patch file that replaces the Twain scanning file with a newer version.
Operating system(s): Microsoft Windows ME
Download file size: 56.0k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
Driver
Operating System
Windows NT4
Version
1.16
Language Driver
Dutch
Size Driver
40.6MB
File Name
oj742du.exe
Observations
This driver has been updated to remove the netdirect features. Other features that have been removed to reduce the driver download file size are the bundled software and the product tour.
This driver is designed for use on computers that will be connected to the OfficeJet K series from the computer's Parallel port or USB port. When installing the OfficeJet K series via a parallel port the computers ECP mode must be turned on.
Download and installation Instructions:
The Officejet K series must be turned off and the Parallel or USB cable must be unplugged from the computer before proceeding!
Download the driver software.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, multimedia applications.
Uninstall any previous versions of the Officejet K series software.
To start the software installation locate and click on the downloaded driver file you saved to your computer's hard drive.
Follow the screen directions presented during software installation.
For a successful install you will see a "Select Cable Type" screen with options for how to connect your OfficeJet K series with a parallel or USB cable.
Select a cable choice and follow the instructions for connecting the OfficeJet K series to your computer.
Upon completing the software installation enable the antivirus software.
Operating system(s): Microsoft Windows NT 4.0
Download file size: 40.64M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
Software and Driver
Operating System
Windows XP
Version
3.10 (A.14.05.09)
Language Driver
Dutch
Size Driver
67.4MB
File Name
a140509_nld_xp.exe
Observations
There is one major new functionality of this driver as listed below:
The Parallel Port is now supported in addition to USB. This driver replaces previous versions of the HP OfficeJet K Series drivers as defined below:
For Windows XP customers this driver replaces driver Version 3.00.
Notice: If you intend to use both a HP OfficeJet K Series and HP OfficeJet G Series All-In-One device on the same PC, there is an uncommon scenario where the OfficeJet G Series will not work. All three of the following conditions must be met in order to experience this situation:
Your OfficeJet K Series has Firmware Version 4.04.
Your OfficeJet K Series is installed on the Parallel Port.
You intend to install an OfficeJet G Series device either on this same computer using a second Parallel Port or on the same Parallel Port at a later time.
If you have not met ALL of these conditions, then you will NOT experience this problem and may proceed. If you expect to encounter all these conditions in the future then do not install this driver. If you are unsure, then contact HP support for further direction.
Follow these steps to determine your HP Officejet K Series device's firmware version:
Simultaneously press and hold the [ENTER] and [Cancel] buttons (this will take two hands for most people)
Release both buttons at the same time
Wait for the "Extended Self-Test Report" to print out.
Look at the "Firmware Version" in the lower third of the page, the left hand column, about the sixth item down. Your device has firmware 4.04 if you see the "Firmware Version: OD404R" on the printout.
Operating system(s): Microsoft Windows XP
Download file size: 67.4M
.
Installation Instructions
Download the web package driver file.
Turn off the HP OfficeJet K Series device and disconnect either the USB cable or Parallel port cable.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
Uninstall the previous version of the HP driver software if any is installed. The Windows XP mini-drivers do not need to be removed.
Run the downloaded .exe file. Follow the screen directions presented during the software installation.
When the software portion of the installation is complete, you will see a "Software Copied Successfully" dialog box with a prompt to "follow the instructions on your setup poster to set up your HP OfficeJet K Series hardware". The instructions below are contained in your setup poster.
Select [Finish] on the "Software Copied Successfully" dialog.
If a request to restart your computer dialog appears, select [yes] to reboot the computer.
Turn on your HP OfficeJet K Series device, and if using USB then reconnect the USB cable between it and the computer, or if using the parallel port then reconnect the parallel port cable between it and the computer.
During the Plug & Play phase, a "Found New Hardware Wizard" dialog will appear.
Select [Next], then [Next], then [Finish] buttons to continue. On some computer it may take a few minutes to install the software.
The desktop icon will be created, and the HP system tray icon will appear in the lower-right corner of the taskbar. The HP Fax Setup Wizard or Electronic Registration will appear depending the features of your HP OfficeJet K Series device.
Complete the HP Fax Setup Wizard, if it appears.
Complete the Electronic Registration, if you have not already done it once.
When the "Congratulations!" dialog appears, select [Skip Tour], since it is not included in the web driver package.
Upon completing the software installation, enable your antivirus software.
View the Readme file or the Onscreen User Guide for further information related to the operation of this driver software. If you chose the default installation location then the Readme.html file will be located in the path:
C:\Program Files\Hewlett-Packard\AiO\hp officejet k series\Help
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
Stand by mode Driver Patch
Operating System
Windows 2000
Version
N/A
Language Driver
English American
Size Driver
142KB
File Name
hpoj_usbstandby.exe
Observations
Description:
This patch is for users running Windows 2000 with a G, V, K, or PSC 700 Series OfficeJet connected to the PC by USB cable. To apply this patch, the user must have Administrator-level access rights for the PC that exhibits the symptom described below.
Symptom:
Under Windows 2000, after a PC comes out of "Stand by" or "Hibernate" mode, the OfficeJet does not reconnect. This prevents users from accessing through software the Scan and Fax functions until a reboot is performed.
What this software accomplishes:
After the PC revives from "Stand by" or "Hibernate" mode, the OfficeJet will make the proper reconnections. Scanning and Faxing functions will work normally. Some minor are also included to make the software more robust.
NOTE: This patch should be applied to K-series software version 1.16 or earlier.
Which files are upgraded by this patch:
hpoid407.sys
hpoius07.sys
For more information about Administrator-level access rights go to Windows 2000 help "adding users" or go to www.microsoft.com/windows2000
Downloading Instructions:
For Microsoft Internet Explorer users:
Click on "Download"
Choose the option "Save this program to disk."
Click OK.
You will now be prompted for the location on your hard drive where you would like to save the program. Save the program to your hard drive, making sure to note the drive and directory where the patch gets copied.
After downloading, locate and run the patch file on your hard drive, "HpOj_USBStandby.exe"
Follow the install instructions that appear on the screen.
Restart the PC to complete the installation process.
For Netscape users:
Click on "Download"
Choose the option "Save to disk."
Click OK.
You will now be prompted for the location on your hard drive where you would like to save the program. Save the program to your hard drive, making sure to note the drive and directory where the patch gets copied.
After downloading, locate the patch file on your hard drive, "HpOj_USBStandby.exe", and run it.
Follow the install instructions that appear on the screen. Restart the PC to complete the installation process.
Operating system(s): Microsoft Windows 2000
Download file size: 141.71k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
USB I-O Patch
Operating System
Windows 2000
Version
1.0
Language Driver
English American
Size Driver
742KB
File Name
usbupdate_windows2000.exe
Observations
Note: This patch is only valid for older versions of the software including versions 1.16, 1.18, and 1.31, as detailed below:
CD Version 1.16, P/N C6748-60033, SW Build A10.03.16
CD Version 1.18, P/N C6748-10003, SW Build A10.03.16
CD Version 1.31, P/N C6748-10004, SW Build A10.02.04 (Asia)
This patch cannot be used on CD Version's 3.00 or later.
Installation Instructions:
Download the file, USBUpdate_Windows2000.exe to a local drive. Make note where (in which folder) the file gets copied.
Temporarily disable any antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
In Windows Explorer (or by some equivalent means) go to the folder where USBUpdate_Windows2000.exe was copied; run the program.
Double-click on the USBUpdate_Windows2000.exe patch file to start it.
Follow the instruction dialogs that appear to install the update.
A restart is necessary after the patch is installed.
Operating system(s): Microsoft Windows 2000
Download file size: 741.51k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
Driver Web Package for both USB and Parallel Ports
Operating System
Windows 2000
Version
3.10 (A.14.05.09)
Language Driver
English American
Size Driver
37.8MB
File Name
a140509_enu_2k.exe
Observations
There is one major new functionality of this driver as listed below:
The Parallel Port is now supported in addition to USB.
This driver replaces previous versions of the HP OfficeJet K Series drivers as defined below:
For Windows 2000 customers this driver replaces drivers Version 1.16, 1.18, 1.31, or earlier.
Notice: If you intend to use both a HP OfficeJet K Series and HP OfficeJet G Series All-In-One device on the same PC, there is an uncommon scenario where the OfficeJet G Series will not work. All three of the following conditions must be met in order to experience this situation:
Your OfficeJet K Series has Firmware Version 4.04.
Your OfficeJet K Series is installed on the Parallel Port.
You intend to install an OfficeJet G Series device either on this same computer using a second Parallel Port or on the same Parallel Port at a later time.
If you have not met ALL of these conditions, then you will NOT experience this problem and may proceed. If you expect to encounter all these conditions in the future then do not install this driver. If you are unsure, then contact HP support for further direction.
Follow these steps to determine your HP Officejet K Series device's firmware version:
Simultaneously press and hold the [ENTER] and [Cancel] buttons (this will take two hands for most people)
Release both buttons at the same time
Wait for the "Extended Self-Test Report" to print out.
Look at the "Firmware Version" in the lower third of the page, the left hand column, about the sixth item down. Your device has firmware 4.04 if you see the "Firmware Version: OD404R" on the printout.
The specific OfficeJet K Series Driver Version 3.10 Installation Instructions follow:
Download the web package driver file.
Turn off the HP Officejet device and unplug the USB cable. If using the parallel port connector it should remain connected.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
Uninstall the previously version of the software (Click Start, click All Programs, point to HP Officejet, and then click Uninstall Software)
Run the downloaded .exe file. Follow the screen directions presented during the software installation.
When the software portion of the installation is complete, you will see a "Software Copied Successfully" dialog box with a prompt to "follow the instructions on your setup poster to set up your HP OfficeJet K Series hardware". The instructions below are contained in your setup poster.
Select [Finish] on the "Software Copied Successfully" dialog.
If a request to restart your computer dialog appears, select [yes] to reboot the computer.
Turn on your HP OfficeJet K Series device, and if using USB then connect the USB cable. If using the parallel port, and the parallel port connector was not connected as instructed in step 1 above, then connect the parallel port cable and perform a second reboot of the computer now.
After the Add New Hardware dialogs, an "Install HP software" dialog will appear.
Select [Next]. NOTE: The ReadIris application and HP instant support are not included with the Web download. Wait for the HP software to start and the HP Fax Setup Wizard to appear.
Complete the HP Fax Setup Wizard, if it appears.
Complete the Electronic Registration, if you have not already done it once.
When "Congratulations!" appears, select [Skip Tour], since it is not included in the web driver package.
Upon completing the software installation, enable your antivirus software.
View the Readme file or the Onscreen User Guide for further information related to the operation of this driver software. If you chose the default installation location then the Readme.html file will be located in the path:
C:\Program Files\Hewlett-Packard\AiO\hp officejet k series\Help
Operating system(s): Microsoft Windows 2000
Download file size: 37.82M
.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
Driver
Operating System
Windows 95
Version
1.16
Language Driver
English American
Size Driver
40.7MB
File Name
oj746en.exe
Observations
This driver has been updated to remove the netdirect features. Other features that have been removed to reduce the driver download file size are the bundled software and the product tour.
This driver is designed for use on computers that will be connected to the OfficeJet K series from the computer's Parallel port or USB port. When installing the OfficeJet K series via a parallel port the computers ECP mode must be turned on.
Download and installation Instructions:
The Officejet K series must be turned off and the Parallel or USB cable must be unplugged from the computer before proceeding!
Download the driver software.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, multimedia applications.
Uninstall any previous versions of the Officejet K series software.
To start the software installation locate and click on the downloaded driver file you saved to your computer's hard drive.
Follow the screen directions presented during software installation.
For a successful install you will see a "Select Cable Type" screen with options for how to connect your OfficeJet K series with a parallel or USB cable.
Select a cable choice and follow the instructions for connecting the OfficeJet K series to your computer.
Upon completing the software installation enable the antivirus software.
Operating system(s): Microsoft Windows 95
Download file size: 40.72M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
AOL Version 8 Update
Operating System
Windows 95-98-Me
Version
1.0.0.3
Language Driver
English American
Size Driver
40KB
File Name
hpoaol07.exe
Observations
HP OfficeJet K Series Software AOL 8 Fix for Windows 95, 98, 98SE, and ME:
This utility has the following additional requirements:
It will only operate correctly under Windows 95, 98, 98 SE, and ME.
It will NOT work on Windows 2000, XP Home, or XP Professional, or the Macintosh OS's.
This patch will only work with hp officejet K series drivers older then version 3.00 such as:
version 1.16 (A10.03.16) (except Korean or Traditional Chinese)
This patch will NOT work on the driver version 3.00 or newer.
INSTALLATION INSTRUCTIONS:
NOTE: This is not a self-installing patch. It requires the user to manually replace the original file with this new one.
Download the file, hpoaol07.exe to a local drive. Make note where (in which folder) the file gets copied.
In Windows Explorer (or by some equivalent means) go to the folder where hpoaol07.exe was copied, right click on "hpoaol07.exe" and select "copy"
Browse to the location of the old installed hpoaol07.exe file. The default is:
C:\Program Files\Hewlett-Packard\HP OfficeJet K series\bin
Right-click on this folder and select "Paste"
When the "Confirm File Replace" dialog appears, confirm that the replacement file is newer and then select [yes].
Manual installation is complete.
Operating system(s): Microsoft Windows 95, Microsoft Windows 98, Microsoft Windows ME
Download file size: 40.0k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
USB I-O Patch
Operating System
Windows 98-Me
Version
1.0
Language Driver
English American
Size Driver
778KB
File Name
usbupdate_windows9x.exe
Observations
Note: This patch is only valid for older versions of the software including versions 1.16, 1.18, and 1.31, as detailed below:
CD Version 1.16, P/N C6748-60033, SW Build A10.03.16
CD Version 1.18, P/N C6748-10003, SW Build A10.03.16
CD Version 1.31, P/N C6748-10004, SW Build A10.02.04 (Asia)
This patch cannot be used on CD Version's 3.00 or later.
Installation Instructions:
Download the file, USBUpdate_Windows9x.exe to a local drive. Make note where (in which folder) the file gets copied.
Temporarily disable any antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
In Windows Explorer (or by some equivalent means) go to the folder where USBUpdate_Windows9x.exe was copied; run the program.
Double-click on the USBUpdate_Windows9x.exe patch file to start it.
Follow the instruction dialogs that appear to install the update.
A restart is necessary after the patch is installed.
Operating system(s): Microsoft Windows 98, Microsoft Windows ME
Download file size: 777.59k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
Millennium TWAIN Software Patch
Operating System
Windows Me
Version
N/A
Language Driver
English American
Size Driver
56KB
File Name
hpodsr07k.ds
Observations
NOTE:
This patch only applies to customers that are using Windows ME as their operating system.
Symptom:
The Officejet K series "acquire" text scanning feature of the Readiris software will not run.
This software provides you:
A patch file that replaces the Twain scanning file with a newer version.
Operating system(s): Microsoft Windows ME
Download file size: 56.0k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
Driver
Operating System
Windows NT4
Version
1.16
Language Driver
English American
Size Driver
40.6MB
File Name
oj742en.exe
Observations
This driver has been updated to remove the netdirect features. Other features that have been removed to reduce the driver download file size are the bundled software and the product tour.
This driver is designed for use on computers that will be connected to the OfficeJet K series from the computer's Parallel port or USB port. When installing the OfficeJet K series via a parallel port the computers ECP mode must be turned on.
Download and installation Instructions:
The Officejet K series must be turned off and the Parallel or USB cable must be unplugged from the computer before proceeding!
Download the driver software.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, multimedia applications.
Uninstall any previous versions of the Officejet K series software.
To start the software installation locate and click on the downloaded driver file you saved to your computer's hard drive.
Follow the screen directions presented during software installation.
For a successful install you will see a "Select Cable Type" screen with options for how to connect your OfficeJet K series with a parallel or USB cable.
Select a cable choice and follow the instructions for connecting the OfficeJet K series to your computer.
Upon completing the software installation enable the antivirus software.
Operating system(s): Microsoft Windows NT 4.0
Download file size: 40.68M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
Patch
Operating System
Windows NT4-2000
Version
n/a
Language Driver
English American
Size Driver
778KB
File Name
hpgk_nettrafficfix.exe
Observations
G and K series Print Server Network Traffic Patch
Description:
Under certain network configurations, HP OfficeJet software may generate large numbers of OpenPrinter calls to the network print server. These OpenPrinter calls, due to their large number, may eventually crash the print server.
Symptom:
The print server crashes periodically and network analysis determines a large number of open OpenPrinter calls going to the print server. At least one HP OfficeJet printer is connected either to the network or locally on a client PC.
What this software patch accomplishes:
Solves the problem by greatly reducing the number of OpenPrinter calls made over the network.
Which files are upgraded by this patch:
Hpoopm07.exe
Hpopfm07.dll
Downloading Instructions:
For Microsoft Internet Explorer users:
Click on "Download"
Choose the option "Save this program to disk."
Click OK.
You will now be prompted for the location on your hard drive where you would like to save the program. Save the program to your hard drive, making sure to note the drive and directory where the patch gets copied.
After downloading, locate the patch file on your hard drive, "HpGK_NetTrafficFix.exe", and run it.
Follow the install instructions that appear on the screen.
When installation completes, RESTART THE PC.
For Netscape users:
Click on "Download"
Choose the option "Save to disk."
Click OK.
You will now be prompted for the location on your hard drive where you would like to save the program. Save the program to your hard drive, making sure to note the drive and directory where the patch gets copied.
After downloading, locate the patch file on your hard drive, "HpGK_NetTrafficFix.exe", and run it.
Follow the install instructions that appear on the screen.
When installation completes, RESTART THE PC
Operating system(s): Microsoft Windows NT 4.0, Microsoft Windows 2000
Download file size: 778.3k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
Software and Driver
Operating System
Windows XP
Version
3.10 (A.14.05.09)
Language Driver
English American
Size Driver
37.8MB
File Name
a140509_enu_xp.exe
Observations
There is one major new functionality of this driver as listed below:
The Parallel Port is now supported in addition to USB. This driver replaces previous versions of the HP OfficeJet K Series drivers as defined below:
For Windows XP customers this driver replaces driver Version 3.00.
Notice: If you intend to use both a HP OfficeJet K Series and HP OfficeJet G Series All-In-One device on the same PC, there is an uncommon scenario where the OfficeJet G Series will not work. All three of the following conditions must be met in order to experience this situation:
Your OfficeJet K Series has Firmware Version 4.04.
Your OfficeJet K Series is installed on the Parallel Port.
You intend to install an OfficeJet G Series device either on this same computer using a second Parallel Port or on the same Parallel Port at a later time.
If you have not met ALL of these conditions, then you will NOT experience this problem and may proceed. If you expect to encounter all these conditions in the future then do not install this driver. If you are unsure, then contact HP support for further direction.
Follow these steps to determine your HP Officejet K Series device's firmware version:
Simultaneously press and hold the [ENTER] and [Cancel] buttons (this will take two hands for most people)
Release both buttons at the same time
Wait for the "Extended Self-Test Report" to print out.
Look at the "Firmware Version" in the lower third of the page, the left hand column, about the sixth item down. Your device has firmware 4.04 if you see the "Firmware Version: OD404R" on the printout.
Operating system(s): Microsoft Windows XP
Download file size: 37.8M
.
Installation Instructions
Download the web package driver file.
Turn off the HP OfficeJet K Series device and disconnect either the USB cable or Parallel port cable.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
Uninstall the previous version of the HP driver software if any is installed. The Windows XP mini-drivers do not need to be removed.
Run the downloaded .exe file. Follow the screen directions presented during the software installation.
When the software portion of the installation is complete, you will see a "Software Copied Successfully" dialog box with a prompt to "follow the instructions on your setup poster to set up your HP OfficeJet K Series hardware". The instructions below are contained in your setup poster.
Select [Finish] on the "Software Copied Successfully" dialog.
If a request to restart your computer dialog appears, select [yes] to reboot the computer.
Turn on your HP OfficeJet K Series device, and if using USB then reconnect the USB cable between it and the computer, or if using the parallel port then reconnect the parallel port cable between it and the computer.
During the Plug & Play phase, a "Found New Hardware Wizard" dialog will appear.
Select [Next], then [Next], then [Finish] buttons to continue. On some computer it may take a few minutes to install the software.
The desktop icon will be created, and the HP system tray icon will appear in the lower-right corner of the taskbar. The HP Fax Setup Wizard or Electronic Registration will appear depending the features of your HP OfficeJet K Series device.
Complete the HP Fax Setup Wizard, if it appears.
Complete the Electronic Registration, if you have not already done it once.
When the "Congratulations!" dialog appears, select [Skip Tour], since it is not included in the web driver package.
Upon completing the software installation, enable your antivirus software.
View the Readme file or the Onscreen User Guide for further information related to the operation of this driver software. If you chose the default installation location then the Readme.html file will be located in the path:
C:\Program Files\Hewlett-Packard\AiO\hp officejet k series\Help
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
Stand by mode Driver Patch
Operating System
Windows 2000
Version
N/A
Language Driver
French
Size Driver
142KB
File Name
hpoj_usbstandby.exe
Observations
Description:
This patch is for users running Windows 2000 with a G, V, K, or PSC 700 Series OfficeJet connected to the PC by USB cable. To apply this patch, the user must have Administrator-level access rights for the PC that exhibits the symptom described below.
Symptom:
Under Windows 2000, after a PC comes out of "Stand by" or "Hibernate" mode, the OfficeJet does not reconnect. This prevents users from accessing through software the Scan and Fax functions until a reboot is performed.
What this software accomplishes:
After the PC revives from "Stand by" or "Hibernate" mode, the OfficeJet will make the proper reconnections. Scanning and Faxing functions will work normally. Some minor are also included to make the software more robust.
NOTE: This patch should be applied to K-series software version 1.16 or earlier.
Which files are upgraded by this patch:
hpoid407.sys
hpoius07.sys
For more information about Administrator-level access rights go to Windows 2000 help "adding users" or go to www.microsoft.com/windows2000
Downloading Instructions:
For Microsoft Internet Explorer users:
Click on "Download"
Choose the option "Save this program to disk."
Click OK.
You will now be prompted for the location on your hard drive where you would like to save the program. Save the program to your hard drive, making sure to note the drive and directory where the patch gets copied.
After downloading, locate and run the patch file on your hard drive, "HpOj_USBStandby.exe"
Follow the install instructions that appear on the screen.
Restart the PC to complete the installation process.
For Netscape users:
Click on "Download"
Choose the option "Save to disk."
Click OK.
You will now be prompted for the location on your hard drive where you would like to save the program. Save the program to your hard drive, making sure to note the drive and directory where the patch gets copied.
After downloading, locate the patch file on your hard drive, "HpOj_USBStandby.exe", and run it.
Follow the install instructions that appear on the screen. Restart the PC to complete the installation process.
Operating system(s): Microsoft Windows 2000
Download file size: 141.71k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
USB I-O Patch
Operating System
Windows 2000
Version
1.0
Language Driver
French
Size Driver
742KB
File Name
usbupdate_windows2000.exe
Observations
Note: This patch is only valid for older versions of the software including versions 1.16, 1.18, and 1.31, as detailed below:
CD Version 1.16, P/N C6748-60033, SW Build A10.03.16
CD Version 1.18, P/N C6748-10003, SW Build A10.03.16
CD Version 1.31, P/N C6748-10004, SW Build A10.02.04 (Asia)
This patch cannot be used on CD Version's 3.00 or later.
Installation Instructions:
Download the file, USBUpdate_Windows2000.exe to a local drive. Make note where (in which folder) the file gets copied.
Temporarily disable any antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
In Windows Explorer (or by some equivalent means) go to the folder where USBUpdate_Windows2000.exe was copied; run the program.
Double-click on the USBUpdate_Windows2000.exe patch file to start it.
Follow the instruction dialogs that appear to install the update.
A restart is necessary after the patch is installed.
Operating system(s): Microsoft Windows 2000
Download file size: 741.51k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
Driver Web Package for both USB and Parallel Ports
Operating System
Windows 2000
Version
3.10 (A.14.05.09)
Language Driver
French
Size Driver
67.4MB
File Name
a140509_fra_2k.exe
Observations
There is one major new functionality of this driver as listed below:
The Parallel Port is now supported in addition to USB.
This driver replaces previous versions of the HP OfficeJet K Series drivers as defined below:
For Windows 2000 customers this driver replaces drivers Version 1.16, 1.18, 1.31, or earlier.
Notice: If you intend to use both a HP OfficeJet K Series and HP OfficeJet G Series All-In-One device on the same PC, there is an uncommon scenario where the OfficeJet G Series will not work. All three of the following conditions must be met in order to experience this situation:
Your OfficeJet K Series has Firmware Version 4.04.
Your OfficeJet K Series is installed on the Parallel Port.
You intend to install an OfficeJet G Series device either on this same computer using a second Parallel Port or on the same Parallel Port at a later time.
If you have not met ALL of these conditions, then you will NOT experience this problem and may proceed. If you expect to encounter all these conditions in the future then do not install this driver. If you are unsure, then contact HP support for further direction.
Follow these steps to determine your HP Officejet K Series device's firmware version:
Simultaneously press and hold the [ENTER] and [Cancel] buttons (this will take two hands for most people)
Release both buttons at the same time
Wait for the "Extended Self-Test Report" to print out.
Look at the "Firmware Version" in the lower third of the page, the left hand column, about the sixth item down. Your device has firmware 4.04 if you see the "Firmware Version: OD404R" on the printout.
The specific OfficeJet K Series Driver Version 3.10 Installation Instructions follow:
Download the web package driver file.
Turn off the HP Officejet device and unplug the USB cable. If using the parallel port connector it should remain connected.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
Uninstall the previously version of the software (Click Start, click All Programs, point to HP Officejet, and then click Uninstall Software)
Run the downloaded .exe file. Follow the screen directions presented during the software installation.
When the software portion of the installation is complete, you will see a "Software Copied Successfully" dialog box with a prompt to "follow the instructions on your setup poster to set up your HP OfficeJet K Series hardware". The instructions below are contained in your setup poster.
Select [Finish] on the "Software Copied Successfully" dialog.
If a request to restart your computer dialog appears, select [yes] to reboot the computer.
Turn on your HP OfficeJet K Series device, and if using USB then connect the USB cable. If using the parallel port, and the parallel port connector was not connected as instructed in step 1 above, then connect the parallel port cable and perform a second reboot of the computer now.
After the Add New Hardware dialogs, an "Install HP software" dialog will appear.
Select [Next]. NOTE: The ReadIris application and HP instant support are not included with the Web download. Wait for the HP software to start and the HP Fax Setup Wizard to appear.
Complete the HP Fax Setup Wizard, if it appears.
Complete the Electronic Registration, if you have not already done it once.
When "Congratulations!" appears, select [Skip Tour], since it is not included in the web driver package.
Upon completing the software installation, enable your antivirus software.
View the Readme file or the Onscreen User Guide for further information related to the operation of this driver software. If you chose the default installation location then the Readme.html file will be located in the path:
C:\Program Files\Hewlett-Packard\AiO\hp officejet k series\Help
Operating system(s): Microsoft Windows 2000
Download file size: 67.42M
.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
Driver
Operating System
Windows 95
Version
1.16
Language Driver
French
Size Driver
40.6MB
File Name
oj746fr.exe
Observations
This driver has been updated to remove the netdirect features. Other features that have been removed to reduce the driver download file size are the bundled software and the product tour.
This driver is designed for use on computers that will be connected to the OfficeJet K series from the computer's Parallel port or USB port. When installing the OfficeJet K series via a parallel port the computers ECP mode must be turned on.
Download and installation Instructions:
The Officejet K series must be turned off and the Parallel or USB cable must be unplugged from the computer before proceeding!
Download the driver software.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, multimedia applications.
Uninstall any previous versions of the Officejet K series software.
To start the software installation locate and click on the downloaded driver file you saved to your computer's hard drive.
Follow the screen directions presented during software installation.
For a successful install you will see a "Select Cable Type" screen with options for how to connect your OfficeJet K series with a parallel or USB cable.
Select a cable choice and follow the instructions for connecting the OfficeJet K series to your computer.
Upon completing the software installation enable the antivirus software.
Operating system(s): Microsoft Windows 95
Download file size: 40.63M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
USB I-O Patch
Operating System
Windows 98-Me
Version
1.0
Language Driver
French
Size Driver
778KB
File Name
usbupdate_windows9x.exe
Observations
Note: This patch is only valid for older versions of the software including versions 1.16, 1.18, and 1.31, as detailed below:
CD Version 1.16, P/N C6748-60033, SW Build A10.03.16
CD Version 1.18, P/N C6748-10003, SW Build A10.03.16
CD Version 1.31, P/N C6748-10004, SW Build A10.02.04 (Asia)
This patch cannot be used on CD Version's 3.00 or later.
Installation Instructions:
Download the file, USBUpdate_Windows9x.exe to a local drive. Make note where (in which folder) the file gets copied.
Temporarily disable any antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
In Windows Explorer (or by some equivalent means) go to the folder where USBUpdate_Windows9x.exe was copied; run the program.
Double-click on the USBUpdate_Windows9x.exe patch file to start it.
Follow the instruction dialogs that appear to install the update.
A restart is necessary after the patch is installed.
Operating system(s): Microsoft Windows 98, Microsoft Windows ME
Download file size: 777.59k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
Millennium TWAIN Software Patch
Operating System
Windows Me
Version
N/A
Language Driver
French
Size Driver
56KB
File Name
hpodsr07k.ds
Observations
NOTE:
This patch only applies to customers that are using Windows ME as their operating system.
Symptom:
The Officejet K series "acquire" text scanning feature of the Readiris software will not run.
This software provides you:
A patch file that replaces the Twain scanning file with a newer version.
Operating system(s): Microsoft Windows ME
Download file size: 56.0k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
Driver
Operating System
Windows NT4
Version
1.16
Language Driver
French
Size Driver
40.5MB
File Name
oj742fr.exe
Observations
This driver has been updated to remove the netdirect features. Other features that have been removed to reduce the driver download file size are the bundled software and the product tour.
This driver is designed for use on computers that will be connected to the OfficeJet K series from the computer's Parallel port or USB port. When installing the OfficeJet K series via a parallel port the computers ECP mode must be turned on.
Download and installation Instructions:
The Officejet K series must be turned off and the Parallel or USB cable must be unplugged from the computer before proceeding!
Download the driver software.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, multimedia applications.
Uninstall any previous versions of the Officejet K series software.
To start the software installation locate and click on the downloaded driver file you saved to your computer's hard drive.
Follow the screen directions presented during software installation.
For a successful install you will see a "Select Cable Type" screen with options for how to connect your OfficeJet K series with a parallel or USB cable.
Select a cable choice and follow the instructions for connecting the OfficeJet K series to your computer.
Upon completing the software installation enable the antivirus software.
Operating system(s): Microsoft Windows NT 4.0
Download file size: 40.59M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
Patch
Operating System
Windows NT4-2000
Version
n/a
Language Driver
French
Size Driver
778KB
File Name
hpgk_nettrafficfix.exe
Observations
G and K series Print Server Network Traffic Patch
Description:
Under certain network configurations, HP OfficeJet software may generate large numbers of OpenPrinter calls to the network print server. These OpenPrinter calls, due to their large number, may eventually crash the print server.
Symptom:
The print server crashes periodically and network analysis determines a large number of open OpenPrinter calls going to the print server. At least one HP OfficeJet printer is connected either to the network or locally on a client PC.
What this software patch accomplishes:
Solves the problem by greatly reducing the number of OpenPrinter calls made over the network.
Which files are upgraded by this patch:
Hpoopm07.exe
Hpopfm07.dll
Downloading Instructions:
For Microsoft Internet Explorer users:
Click on "Download"
Choose the option "Save this program to disk."
Click OK.
You will now be prompted for the location on your hard drive where you would like to save the program. Save the program to your hard drive, making sure to note the drive and directory where the patch gets copied.
After downloading, locate the patch file on your hard drive, "HpGK_NetTrafficFix.exe", and run it.
Follow the install instructions that appear on the screen.
When installation completes, RESTART THE PC.
For Netscape users:
Click on "Download"
Choose the option "Save to disk."
Click OK.
You will now be prompted for the location on your hard drive where you would like to save the program. Save the program to your hard drive, making sure to note the drive and directory where the patch gets copied.
After downloading, locate the patch file on your hard drive, "HpGK_NetTrafficFix.exe", and run it.
Follow the install instructions that appear on the screen.
When installation completes, RESTART THE PC
Operating system(s): Microsoft Windows NT 4.0, Microsoft Windows 2000
Download file size: 778.3k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
Software and Driver
Operating System
Windows XP
Version
3.10 (A.14.05.09)
Language Driver
French
Size Driver
67.3MB
File Name
a140509_fra_xp.exe
Observations
There is one major new functionality of this driver as listed below:
The Parallel Port is now supported in addition to USB. This driver replaces previous versions of the HP OfficeJet K Series drivers as defined below:
For Windows XP customers this driver replaces driver Version 3.00.
Notice: If you intend to use both a HP OfficeJet K Series and HP OfficeJet G Series All-In-One device on the same PC, there is an uncommon scenario where the OfficeJet G Series will not work. All three of the following conditions must be met in order to experience this situation:
Your OfficeJet K Series has Firmware Version 4.04.
Your OfficeJet K Series is installed on the Parallel Port.
You intend to install an OfficeJet G Series device either on this same computer using a second Parallel Port or on the same Parallel Port at a later time.
If you have not met ALL of these conditions, then you will NOT experience this problem and may proceed. If you expect to encounter all these conditions in the future then do not install this driver. If you are unsure, then contact HP support for further direction.
Follow these steps to determine your HP Officejet K Series device's firmware version:
Simultaneously press and hold the [ENTER] and [Cancel] buttons (this will take two hands for most people)
Release both buttons at the same time
Wait for the "Extended Self-Test Report" to print out.
Look at the "Firmware Version" in the lower third of the page, the left hand column, about the sixth item down. Your device has firmware 4.04 if you see the "Firmware Version: OD404R" on the printout.
Operating system(s): Microsoft Windows XP
Download file size: 67.36M
.
Installation Instructions
Download the web package driver file.
Turn off the HP OfficeJet K Series device and disconnect either the USB cable or Parallel port cable.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
Uninstall the previous version of the HP driver software if any is installed. The Windows XP mini-drivers do not need to be removed.
Run the downloaded .exe file. Follow the screen directions presented during the software installation.
When the software portion of the installation is complete, you will see a "Software Copied Successfully" dialog box with a prompt to "follow the instructions on your setup poster to set up your HP OfficeJet K Series hardware". The instructions below are contained in your setup poster.
Select [Finish] on the "Software Copied Successfully" dialog.
If a request to restart your computer dialog appears, select [yes] to reboot the computer.
Turn on your HP OfficeJet K Series device, and if using USB then reconnect the USB cable between it and the computer, or if using the parallel port then reconnect the parallel port cable between it and the computer.
During the Plug & Play phase, a "Found New Hardware Wizard" dialog will appear.
Select [Next], then [Next], then [Finish] buttons to continue. On some computer it may take a few minutes to install the software.
The desktop icon will be created, and the HP system tray icon will appear in the lower-right corner of the taskbar. The HP Fax Setup Wizard or Electronic Registration will appear depending the features of your HP OfficeJet K Series device.
Complete the HP Fax Setup Wizard, if it appears.
Complete the Electronic Registration, if you have not already done it once.
When the "Congratulations!" dialog appears, select [Skip Tour], since it is not included in the web driver package.
Upon completing the software installation, enable your antivirus software.
View the Readme file or the Onscreen User Guide for further information related to the operation of this driver software. If you chose the default installation location then the Readme.html file will be located in the path:
C:\Program Files\Hewlett-Packard\AiO\hp officejet k series\Help
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
USB I-O Patch
Operating System
Windows 2000
Version
1.0
Language Driver
German
Size Driver
742KB
File Name
usbupdate_windows2000.exe
Observations
Note: This patch is only valid for older versions of the software including versions 1.16, 1.18, and 1.31, as detailed below:
CD Version 1.16, P/N C6748-60033, SW Build A10.03.16
CD Version 1.18, P/N C6748-10003, SW Build A10.03.16
CD Version 1.31, P/N C6748-10004, SW Build A10.02.04 (Asia)
This patch cannot be used on CD Version's 3.00 or later.
Installation Instructions:
Download the file, USBUpdate_Windows2000.exe to a local drive. Make note where (in which folder) the file gets copied.
Temporarily disable any antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
In Windows Explorer (or by some equivalent means) go to the folder where USBUpdate_Windows2000.exe was copied; run the program.
Double-click on the USBUpdate_Windows2000.exe patch file to start it.
Follow the instruction dialogs that appear to install the update.
A restart is necessary after the patch is installed.
Operating system(s): Microsoft Windows 2000
Download file size: 741.51k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
Driver Web Package for both USB and Parallel Ports
Operating System
Windows 2000
Version
3.10 (A.14.05.09)
Language Driver
German
Size Driver
67.3MB
File Name
a140509_deu_2k.exe
Observations
There is one major new functionality of this driver as listed below:
The Parallel Port is now supported in addition to USB.
This driver replaces previous versions of the HP OfficeJet K Series drivers as defined below:
For Windows 2000 customers this driver replaces drivers Version 1.16, 1.18, 1.31, or earlier.
Notice: If you intend to use both a HP OfficeJet K Series and HP OfficeJet G Series All-In-One device on the same PC, there is an uncommon scenario where the OfficeJet G Series will not work. All three of the following conditions must be met in order to experience this situation:
Your OfficeJet K Series has Firmware Version 4.04.
Your OfficeJet K Series is installed on the Parallel Port.
You intend to install an OfficeJet G Series device either on this same computer using a second Parallel Port or on the same Parallel Port at a later time.
If you have not met ALL of these conditions, then you will NOT experience this problem and may proceed. If you expect to encounter all these conditions in the future then do not install this driver. If you are unsure, then contact HP support for further direction.
Follow these steps to determine your HP Officejet K Series device's firmware version:
Simultaneously press and hold the [ENTER] and [Cancel] buttons (this will take two hands for most people)
Release both buttons at the same time
Wait for the "Extended Self-Test Report" to print out.
Look at the "Firmware Version" in the lower third of the page, the left hand column, about the sixth item down. Your device has firmware 4.04 if you see the "Firmware Version: OD404R" on the printout.
The specific OfficeJet K Series Driver Version 3.10 Installation Instructions follow:
Download the web package driver file.
Turn off the HP Officejet device and unplug the USB cable. If using the parallel port connector it should remain connected.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
Uninstall the previously version of the software (Click Start, click All Programs, point to HP Officejet, and then click Uninstall Software)
Run the downloaded .exe file. Follow the screen directions presented during the software installation.
When the software portion of the installation is complete, you will see a "Software Copied Successfully" dialog box with a prompt to "follow the instructions on your setup poster to set up your HP OfficeJet K Series hardware". The instructions below are contained in your setup poster.
Select [Finish] on the "Software Copied Successfully" dialog.
If a request to restart your computer dialog appears, select [yes] to reboot the computer.
Turn on your HP OfficeJet K Series device, and if using USB then connect the USB cable. If using the parallel port, and the parallel port connector was not connected as instructed in step 1 above, then connect the parallel port cable and perform a second reboot of the computer now.
After the Add New Hardware dialogs, an "Install HP software" dialog will appear.
Select [Next]. NOTE: The ReadIris application and HP instant support are not included with the Web download. Wait for the HP software to start and the HP Fax Setup Wizard to appear.
Complete the HP Fax Setup Wizard, if it appears.
Complete the Electronic Registration, if you have not already done it once.
When "Congratulations!" appears, select [Skip Tour], since it is not included in the web driver package.
Upon completing the software installation, enable your antivirus software.
View the Readme file or the Onscreen User Guide for further information related to the operation of this driver software. If you chose the default installation location then the Readme.html file will be located in the path:
C:\Program Files\Hewlett-Packard\AiO\hp officejet k series\Help
Operating system(s): Microsoft Windows 2000
Download file size: 67.37M
.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
Stand by mode Driver Patch
Operating System
Windows 2000
Version
N/A
Language Driver
German
Size Driver
142KB
File Name
hpoj_usbstandby.exe
Observations
Description:
This patch is for users running Windows 2000 with a G, V, K, or PSC 700 Series OfficeJet connected to the PC by USB cable. To apply this patch, the user must have Administrator-level access rights for the PC that exhibits the symptom described below.
Symptom:
Under Windows 2000, after a PC comes out of "Stand by" or "Hibernate" mode, the OfficeJet does not reconnect. This prevents users from accessing through software the Scan and Fax functions until a reboot is performed.
What this software accomplishes:
After the PC revives from "Stand by" or "Hibernate" mode, the OfficeJet will make the proper reconnections. Scanning and Faxing functions will work normally. Some minor are also included to make the software more robust.
NOTE: This patch should be applied to K-series software version 1.16 or earlier.
Which files are upgraded by this patch:
hpoid407.sys
hpoius07.sys
For more information about Administrator-level access rights go to Windows 2000 help "adding users" or go to www.microsoft.com/windows2000
Downloading Instructions:
For Microsoft Internet Explorer users:
Click on "Download"
Choose the option "Save this program to disk."
Click OK.
You will now be prompted for the location on your hard drive where you would like to save the program. Save the program to your hard drive, making sure to note the drive and directory where the patch gets copied.
After downloading, locate and run the patch file on your hard drive, "HpOj_USBStandby.exe"
Follow the install instructions that appear on the screen.
Restart the PC to complete the installation process.
For Netscape users:
Click on "Download"
Choose the option "Save to disk."
Click OK.
You will now be prompted for the location on your hard drive where you would like to save the program. Save the program to your hard drive, making sure to note the drive and directory where the patch gets copied.
After downloading, locate the patch file on your hard drive, "HpOj_USBStandby.exe", and run it.
Follow the install instructions that appear on the screen. Restart the PC to complete the installation process.
Operating system(s): Microsoft Windows 2000
Download file size: 141.71k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
Driver
Operating System
Windows 95
Version
1.16
Language Driver
German
Size Driver
40.6MB
File Name
oj746ge.exe
Observations
This driver has been updated to remove the netdirect features. Other features that have been removed to reduce the driver download file size are the bundled software and the product tour.
This driver is designed for use on computers that will be connected to the OfficeJet K series from the computer's Parallel port or USB port. When installing the OfficeJet K series via a parallel port the computers ECP mode must be turned on.
Download and installation Instructions:
The Officejet K series must be turned off and the Parallel or USB cable must be unplugged from the computer before proceeding!
Download the driver software.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, multimedia applications.
Uninstall any previous versions of the Officejet K series software.
To start the software installation locate and click on the downloaded driver file you saved to your computer's hard drive.
Follow the screen directions presented during software installation.
For a successful install you will see a "Select Cable Type" screen with options for how to connect your OfficeJet K series with a parallel or USB cable.
Select a cable choice and follow the instructions for connecting the OfficeJet K series to your computer.
Upon completing the software installation enable the antivirus software.
Operating system(s): Microsoft Windows 95
Download file size: 40.64M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
USB I-O Patch
Operating System
Windows 98-Me
Version
1.0
Language Driver
German
Size Driver
778KB
File Name
usbupdate_windows9x.exe
Observations
Note: This patch is only valid for older versions of the software including versions 1.16, 1.18, and 1.31, as detailed below:
CD Version 1.16, P/N C6748-60033, SW Build A10.03.16
CD Version 1.18, P/N C6748-10003, SW Build A10.03.16
CD Version 1.31, P/N C6748-10004, SW Build A10.02.04 (Asia)
This patch cannot be used on CD Version's 3.00 or later.
Installation Instructions:
Download the file, USBUpdate_Windows9x.exe to a local drive. Make note where (in which folder) the file gets copied.
Temporarily disable any antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
In Windows Explorer (or by some equivalent means) go to the folder where USBUpdate_Windows9x.exe was copied; run the program.
Double-click on the USBUpdate_Windows9x.exe patch file to start it.
Follow the instruction dialogs that appear to install the update.
A restart is necessary after the patch is installed.
Operating system(s): Microsoft Windows 98, Microsoft Windows ME
Download file size: 777.59k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
Millennium TWAIN Software Patch
Operating System
Windows Me
Version
N/A
Language Driver
German
Size Driver
56KB
File Name
hpodsr07k.ds
Observations
NOTE:
This patch only applies to customers that are using Windows ME as their operating system.
Symptom:
The Officejet K series "acquire" text scanning feature of the Readiris software will not run.
This software provides you:
A patch file that replaces the Twain scanning file with a newer version.
Operating system(s): Microsoft Windows ME
Download file size: 56.0k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
Driver
Operating System
Windows NT4
Version
1.16
Language Driver
German
Size Driver
40.5MB
File Name
oj742ge.exe
Observations
This driver has been updated to remove the netdirect features. Other features that have been removed to reduce the driver download file size are the bundled software and the product tour.
This driver is designed for use on computers that will be connected to the OfficeJet K series from the computer's Parallel port or USB port. When installing the OfficeJet K series via a parallel port the computers ECP mode must be turned on.
Download and installation Instructions:
The Officejet K series must be turned off and the Parallel or USB cable must be unplugged from the computer before proceeding!
Download the driver software.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, multimedia applications.
Uninstall any previous versions of the Officejet K series software.
To start the software installation locate and click on the downloaded driver file you saved to your computer's hard drive.
Follow the screen directions presented during software installation.
For a successful install you will see a "Select Cable Type" screen with options for how to connect your OfficeJet K series with a parallel or USB cable.
Select a cable choice and follow the instructions for connecting the OfficeJet K series to your computer.
Upon completing the software installation enable the antivirus software.
Operating system(s): Microsoft Windows NT 4.0
Download file size: 40.6M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
Patch
Operating System
Windows NT4-2000
Version
n/a
Language Driver
German
Size Driver
778KB
File Name
hpgk_nettrafficfix.exe
Observations
G and K series Print Server Network Traffic Patch
Description:
Under certain network configurations, HP OfficeJet software may generate large numbers of OpenPrinter calls to the network print server. These OpenPrinter calls, due to their large number, may eventually crash the print server.
Symptom:
The print server crashes periodically and network analysis determines a large number of open OpenPrinter calls going to the print server. At least one HP OfficeJet printer is connected either to the network or locally on a client PC.
What this software patch accomplishes:
Solves the problem by greatly reducing the number of OpenPrinter calls made over the network.
Which files are upgraded by this patch:
Hpoopm07.exe
Hpopfm07.dll
Downloading Instructions:
For Microsoft Internet Explorer users:
Click on "Download"
Choose the option "Save this program to disk."
Click OK.
You will now be prompted for the location on your hard drive where you would like to save the program. Save the program to your hard drive, making sure to note the drive and directory where the patch gets copied.
After downloading, locate the patch file on your hard drive, "HpGK_NetTrafficFix.exe", and run it.
Follow the install instructions that appear on the screen.
When installation completes, RESTART THE PC.
For Netscape users:
Click on "Download"
Choose the option "Save to disk."
Click OK.
You will now be prompted for the location on your hard drive where you would like to save the program. Save the program to your hard drive, making sure to note the drive and directory where the patch gets copied.
After downloading, locate the patch file on your hard drive, "HpGK_NetTrafficFix.exe", and run it.
Follow the install instructions that appear on the screen.
When installation completes, RESTART THE PC
Operating system(s): Microsoft Windows NT 4.0, Microsoft Windows 2000
Download file size: 778.3k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
Software and Driver
Operating System
Windows XP
Version
3.10 (A.14.05.09)
Language Driver
German
Size Driver
67.3MB
File Name
a140509_deu_xp.exe
Observations
There is one major new functionality of this driver as listed below:
The Parallel Port is now supported in addition to USB. This driver replaces previous versions of the HP OfficeJet K Series drivers as defined below:
For Windows XP customers this driver replaces driver Version 3.00.
Notice: If you intend to use both a HP OfficeJet K Series and HP OfficeJet G Series All-In-One device on the same PC, there is an uncommon scenario where the OfficeJet G Series will not work. All three of the following conditions must be met in order to experience this situation:
Your OfficeJet K Series has Firmware Version 4.04.
Your OfficeJet K Series is installed on the Parallel Port.
You intend to install an OfficeJet G Series device either on this same computer using a second Parallel Port or on the same Parallel Port at a later time.
If you have not met ALL of these conditions, then you will NOT experience this problem and may proceed. If you expect to encounter all these conditions in the future then do not install this driver. If you are unsure, then contact HP support for further direction.
Follow these steps to determine your HP Officejet K Series device's firmware version:
Simultaneously press and hold the [ENTER] and [Cancel] buttons (this will take two hands for most people)
Release both buttons at the same time
Wait for the "Extended Self-Test Report" to print out.
Look at the "Firmware Version" in the lower third of the page, the left hand column, about the sixth item down. Your device has firmware 4.04 if you see the "Firmware Version: OD404R" on the printout.
Operating system(s): Microsoft Windows XP
Download file size: 67.31M
.
Installation Instructions
Download the web package driver file.
Turn off the HP OfficeJet K Series device and disconnect either the USB cable or Parallel port cable.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
Uninstall the previous version of the HP driver software if any is installed. The Windows XP mini-drivers do not need to be removed.
Run the downloaded .exe file. Follow the screen directions presented during the software installation.
When the software portion of the installation is complete, you will see a "Software Copied Successfully" dialog box with a prompt to "follow the instructions on your setup poster to set up your HP OfficeJet K Series hardware". The instructions below are contained in your setup poster.
Select [Finish] on the "Software Copied Successfully" dialog.
If a request to restart your computer dialog appears, select [yes] to reboot the computer.
Turn on your HP OfficeJet K Series device, and if using USB then reconnect the USB cable between it and the computer, or if using the parallel port then reconnect the parallel port cable between it and the computer.
During the Plug & Play phase, a "Found New Hardware Wizard" dialog will appear.
Select [Next], then [Next], then [Finish] buttons to continue. On some computer it may take a few minutes to install the software.
The desktop icon will be created, and the HP system tray icon will appear in the lower-right corner of the taskbar. The HP Fax Setup Wizard or Electronic Registration will appear depending the features of your HP OfficeJet K Series device.
Complete the HP Fax Setup Wizard, if it appears.
Complete the Electronic Registration, if you have not already done it once.
When the "Congratulations!" dialog appears, select [Skip Tour], since it is not included in the web driver package.
Upon completing the software installation, enable your antivirus software.
View the Readme file or the Onscreen User Guide for further information related to the operation of this driver software. If you chose the default installation location then the Readme.html file will be located in the path:
C:\Program Files\Hewlett-Packard\AiO\hp officejet k series\Help
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
Stand by mode Driver Patch
Operating System
Windows 2000
Version
N/A
Language Driver
Italian
Size Driver
142KB
File Name
hpoj_usbstandby.exe
Observations
Description:
This patch is for users running Windows 2000 with a G, V, K, or PSC 700 Series OfficeJet connected to the PC by USB cable. To apply this patch, the user must have Administrator-level access rights for the PC that exhibits the symptom described below.
Symptom:
Under Windows 2000, after a PC comes out of "Stand by" or "Hibernate" mode, the OfficeJet does not reconnect. This prevents users from accessing through software the Scan and Fax functions until a reboot is performed.
What this software accomplishes:
After the PC revives from "Stand by" or "Hibernate" mode, the OfficeJet will make the proper reconnections. Scanning and Faxing functions will work normally. Some minor are also included to make the software more robust.
NOTE: This patch should be applied to K-series software version 1.16 or earlier.
Which files are upgraded by this patch:
hpoid407.sys
hpoius07.sys
For more information about Administrator-level access rights go to Windows 2000 help "adding users" or go to www.microsoft.com/windows2000
Downloading Instructions:
For Microsoft Internet Explorer users:
Click on "Download"
Choose the option "Save this program to disk."
Click OK.
You will now be prompted for the location on your hard drive where you would like to save the program. Save the program to your hard drive, making sure to note the drive and directory where the patch gets copied.
After downloading, locate and run the patch file on your hard drive, "HpOj_USBStandby.exe"
Follow the install instructions that appear on the screen.
Restart the PC to complete the installation process.
For Netscape users:
Click on "Download"
Choose the option "Save to disk."
Click OK.
You will now be prompted for the location on your hard drive where you would like to save the program. Save the program to your hard drive, making sure to note the drive and directory where the patch gets copied.
After downloading, locate the patch file on your hard drive, "HpOj_USBStandby.exe", and run it.
Follow the install instructions that appear on the screen. Restart the PC to complete the installation process.
Operating system(s): Microsoft Windows 2000
Download file size: 141.71k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
USB I-O Patch
Operating System
Windows 2000
Version
1.0
Language Driver
Italian
Size Driver
742KB
File Name
usbupdate_windows2000.exe
Observations
Note: This patch is only valid for older versions of the software including versions 1.16, 1.18, and 1.31, as detailed below:
CD Version 1.16, P/N C6748-60033, SW Build A10.03.16
CD Version 1.18, P/N C6748-10003, SW Build A10.03.16
CD Version 1.31, P/N C6748-10004, SW Build A10.02.04 (Asia)
This patch cannot be used on CD Version's 3.00 or later.
Installation Instructions:
Download the file, USBUpdate_Windows2000.exe to a local drive. Make note where (in which folder) the file gets copied.
Temporarily disable any antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
In Windows Explorer (or by some equivalent means) go to the folder where USBUpdate_Windows2000.exe was copied; run the program.
Double-click on the USBUpdate_Windows2000.exe patch file to start it.
Follow the instruction dialogs that appear to install the update.
A restart is necessary after the patch is installed.
Operating system(s): Microsoft Windows 2000
Download file size: 741.51k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
Driver Web Package for both USB and Parallel Ports
Operating System
Windows 2000
Version
1.16
Language Driver
Italian
Size Driver
42.4MB
File Name
oj740it.exe
Observations
There is one major new functionality of this driver as listed below:
The Parallel Port is now supported in addition to USB.
This driver replaces previous versions of the HP OfficeJet K Series drivers as defined below:
For Windows 2000 customers this driver replaces drivers Version 1.16, 1.18, 1.31, or earlier.
Notice: If you intend to use both a HP OfficeJet K Series and HP OfficeJet G Series All-In-One device on the same PC, there is an uncommon scenario where the OfficeJet G Series will not work. All three of the following conditions must be met in order to experience this situation:
Your OfficeJet K Series has Firmware Version 4.04.
Your OfficeJet K Series is installed on the Parallel Port.
You intend to install an OfficeJet G Series device either on this same computer using a second Parallel Port or on the same Parallel Port at a later time.
If you have not met ALL of these conditions, then you will NOT experience this problem and may proceed. If you expect to encounter all these conditions in the future then do not install this driver. If you are unsure, then contact HP support for further direction.
Follow these steps to determine your HP Officejet K Series device's firmware version:
Simultaneously press and hold the [ENTER] and [Cancel] buttons (this will take two hands for most people)
Release both buttons at the same time
Wait for the "Extended Self-Test Report" to print out.
Look at the "Firmware Version" in the lower third of the page, the left hand column, about the sixth item down. Your device has firmware 4.04 if you see the "Firmware Version: OD404R" on the printout.
The specific OfficeJet K Series Driver Version 3.10 Installation Instructions follow:
Download the web package driver file.
Turn off the HP Officejet device and unplug the USB cable. If using the parallel port connector it should remain connected.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
Uninstall the previously version of the software (Click Start, click All Programs, point to HP Officejet, and then click Uninstall Software)
Run the downloaded .exe file. Follow the screen directions presented during the software installation.
When the software portion of the installation is complete, you will see a "Software Copied Successfully" dialog box with a prompt to "follow the instructions on your setup poster to set up your HP OfficeJet K Series hardware". The instructions below are contained in your setup poster.
Select [Finish] on the "Software Copied Successfully" dialog.
If a request to restart your computer dialog appears, select [yes] to reboot the computer.
Turn on your HP OfficeJet K Series device, and if using USB then connect the USB cable. If using the parallel port, and the parallel port connector was not connected as instructed in step 1 above, then connect the parallel port cable and perform a second reboot of the computer now.
After the Add New Hardware dialogs, an "Install HP software" dialog will appear.
Select [Next]. NOTE: The ReadIris application and HP instant support are not included with the Web download. Wait for the HP software to start and the HP Fax Setup Wizard to appear.
Complete the HP Fax Setup Wizard, if it appears.
Complete the Electronic Registration, if you have not already done it once.
When "Congratulations!" appears, select [Skip Tour], since it is not included in the web driver package.
Upon completing the software installation, enable your antivirus software.
View the Readme file or the Onscreen User Guide for further information related to the operation of this driver software. If you chose the default installation location then the Readme.html file will be located in the path:
C:\Program Files\Hewlett-Packard\AiO\hp officejet k series\Help
Operating system(s): Microsoft Windows 2000
Download file size: 42.5M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
Driver
Operating System
Windows 95
Version
1.16
Language Driver
Italian
Size Driver
40.4MB
File Name
oj746it.exe
Observations
This driver has been updated to remove the netdirect features. Other features that have been removed to reduce the driver download file size are the bundled software and the product tour.
This driver is designed for use on computers that will be connected to the OfficeJet K series from the computer's Parallel port or USB port. When installing the OfficeJet K series via a parallel port the computers ECP mode must be turned on.
Download and installation Instructions:
The Officejet K series must be turned off and the Parallel or USB cable must be unplugged from the computer before proceeding!
Download the driver software.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, multimedia applications.
Uninstall any previous versions of the Officejet K series software.
To start the software installation locate and click on the downloaded driver file you saved to your computer's hard drive.
Follow the screen directions presented during software installation.
For a successful install you will see a "Select Cable Type" screen with options for how to connect your OfficeJet K series with a parallel or USB cable.
Select a cable choice and follow the instructions for connecting the OfficeJet K series to your computer.
Upon completing the software installation enable the antivirus software.
Operating system(s): Microsoft Windows 95
Download file size: 40.46M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
USB I-O Patch
Operating System
Windows 98-Me
Version
1.0
Language Driver
Italian
Size Driver
778KB
File Name
usbupdate_windows9x.exe
Observations
Note: This patch is only valid for older versions of the software including versions 1.16, 1.18, and 1.31, as detailed below:
CD Version 1.16, P/N C6748-60033, SW Build A10.03.16
CD Version 1.18, P/N C6748-10003, SW Build A10.03.16
CD Version 1.31, P/N C6748-10004, SW Build A10.02.04 (Asia)
This patch cannot be used on CD Version's 3.00 or later.
Installation Instructions:
Download the file, USBUpdate_Windows9x.exe to a local drive. Make note where (in which folder) the file gets copied.
Temporarily disable any antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
In Windows Explorer (or by some equivalent means) go to the folder where USBUpdate_Windows9x.exe was copied; run the program.
Double-click on the USBUpdate_Windows9x.exe patch file to start it.
Follow the instruction dialogs that appear to install the update.
A restart is necessary after the patch is installed.
Operating system(s): Microsoft Windows 98, Microsoft Windows ME
Download file size: 777.59k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
Millennium TWAIN Software Patch
Operating System
Windows Me
Version
N/A
Language Driver
Italian
Size Driver
56KB
File Name
hpodsr07k.ds
Observations
NOTE:
This patch only applies to customers that are using Windows ME as their operating system.
Symptom:
The Officejet K series "acquire" text scanning feature of the Readiris software will not run.
This software provides you:
A patch file that replaces the Twain scanning file with a newer version.
Operating system(s): Microsoft Windows ME
Download file size: 56.0k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
Driver
Operating System
Windows NT4
Version
1.16
Language Driver
Italian
Size Driver
40.4MB
File Name
oj742it.exe
Observations
This driver has been updated to remove the netdirect features. Other features that have been removed to reduce the driver download file size are the bundled software and the product tour.
This driver is designed for use on computers that will be connected to the OfficeJet K series from the computer's Parallel port or USB port. When installing the OfficeJet K series via a parallel port the computers ECP mode must be turned on.
Download and installation Instructions:
The Officejet K series must be turned off and the Parallel or USB cable must be unplugged from the computer before proceeding!
Download the driver software.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, multimedia applications.
Uninstall any previous versions of the Officejet K series software.
To start the software installation locate and click on the downloaded driver file you saved to your computer's hard drive.
Follow the screen directions presented during software installation.
For a successful install you will see a "Select Cable Type" screen with options for how to connect your OfficeJet K series with a parallel or USB cable.
Select a cable choice and follow the instructions for connecting the OfficeJet K series to your computer.
Upon completing the software installation enable the antivirus software.
Operating system(s): Microsoft Windows NT 4.0
Download file size: 40.43M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
Patch
Operating System
Windows NT4-2000
Version
n/a
Language Driver
Italian
Size Driver
778KB
File Name
hpgk_nettrafficfix.exe
Observations
G and K series Print Server Network Traffic Patch
Description:
Under certain network configurations, HP OfficeJet software may generate large numbers of OpenPrinter calls to the network print server. These OpenPrinter calls, due to their large number, may eventually crash the print server.
Symptom:
The print server crashes periodically and network analysis determines a large number of open OpenPrinter calls going to the print server. At least one HP OfficeJet printer is connected either to the network or locally on a client PC.
What this software patch accomplishes:
Solves the problem by greatly reducing the number of OpenPrinter calls made over the network.
Which files are upgraded by this patch:
Hpoopm07.exe
Hpopfm07.dll
Downloading Instructions:
For Microsoft Internet Explorer users:
Click on "Download"
Choose the option "Save this program to disk."
Click OK.
You will now be prompted for the location on your hard drive where you would like to save the program. Save the program to your hard drive, making sure to note the drive and directory where the patch gets copied.
After downloading, locate the patch file on your hard drive, "HpGK_NetTrafficFix.exe", and run it.
Follow the install instructions that appear on the screen.
When installation completes, RESTART THE PC.
For Netscape users:
Click on "Download"
Choose the option "Save to disk."
Click OK.
You will now be prompted for the location on your hard drive where you would like to save the program. Save the program to your hard drive, making sure to note the drive and directory where the patch gets copied.
After downloading, locate the patch file on your hard drive, "HpGK_NetTrafficFix.exe", and run it.
Follow the install instructions that appear on the screen.
When installation completes, RESTART THE PC
Operating system(s): Microsoft Windows NT 4.0, Microsoft Windows 2000
Download file size: 778.3k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
Software and Driver
Operating System
Windows XP
Version
3.10 (A.14.05.09)
Language Driver
Italian
Size Driver
67.1MB
File Name
a140509_ita_xp.exe
Observations
There is one major new functionality of this driver as listed below:
The Parallel Port is now supported in addition to USB. This driver replaces previous versions of the HP OfficeJet K Series drivers as defined below:
For Windows XP customers this driver replaces driver Version 3.00.
Notice: If you intend to use both a HP OfficeJet K Series and HP OfficeJet G Series All-In-One device on the same PC, there is an uncommon scenario where the OfficeJet G Series will not work. All three of the following conditions must be met in order to experience this situation:
Your OfficeJet K Series has Firmware Version 4.04.
Your OfficeJet K Series is installed on the Parallel Port.
You intend to install an OfficeJet G Series device either on this same computer using a second Parallel Port or on the same Parallel Port at a later time.
If you have not met ALL of these conditions, then you will NOT experience this problem and may proceed. If you expect to encounter all these conditions in the future then do not install this driver. If you are unsure, then contact HP support for further direction.
Follow these steps to determine your HP Officejet K Series device's firmware version:
Simultaneously press and hold the [ENTER] and [Cancel] buttons (this will take two hands for most people)
Release both buttons at the same time
Wait for the "Extended Self-Test Report" to print out.
Look at the "Firmware Version" in the lower third of the page, the left hand column, about the sixth item down. Your device has firmware 4.04 if you see the "Firmware Version: OD404R" on the printout.
Operating system(s): Microsoft Windows XP
Download file size: 67.13M
.
Installation Instructions
Download the web package driver file.
Turn off the HP OfficeJet K Series device and disconnect either the USB cable or Parallel port cable.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
Uninstall the previous version of the HP driver software if any is installed. The Windows XP mini-drivers do not need to be removed.
Run the downloaded .exe file. Follow the screen directions presented during the software installation.
When the software portion of the installation is complete, you will see a "Software Copied Successfully" dialog box with a prompt to "follow the instructions on your setup poster to set up your HP OfficeJet K Series hardware". The instructions below are contained in your setup poster.
Select [Finish] on the "Software Copied Successfully" dialog.
If a request to restart your computer dialog appears, select [yes] to reboot the computer.
Turn on your HP OfficeJet K Series device, and if using USB then reconnect the USB cable between it and the computer, or if using the parallel port then reconnect the parallel port cable between it and the computer.
During the Plug & Play phase, a "Found New Hardware Wizard" dialog will appear.
Select [Next], then [Next], then [Finish] buttons to continue. On some computer it may take a few minutes to install the software.
The desktop icon will be created, and the HP system tray icon will appear in the lower-right corner of the taskbar. The HP Fax Setup Wizard or Electronic Registration will appear depending the features of your HP OfficeJet K Series device.
Complete the HP Fax Setup Wizard, if it appears.
Complete the Electronic Registration, if you have not already done it once.
When the "Congratulations!" dialog appears, select [Skip Tour], since it is not included in the web driver package.
Upon completing the software installation, enable your antivirus software.
View the Readme file or the Onscreen User Guide for further information related to the operation of this driver software. If you chose the default installation location then the Readme.html file will be located in the path:
C:\Program Files\Hewlett-Packard\AiO\hp officejet k series\Help
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
Stand by mode Driver Patch
Operating System
Windows 2000
Version
N/A
Language Driver
Korean
Size Driver
142KB
File Name
hpoj_usbstandby.exe
Observations
Description:
This patch is for users running Windows 2000 with a G, V, K, or PSC 700 Series OfficeJet connected to the PC by USB cable. To apply this patch, the user must have Administrator-level access rights for the PC that exhibits the symptom described below.
Symptom:
Under Windows 2000, after a PC comes out of "Stand by" or "Hibernate" mode, the OfficeJet does not reconnect. This prevents users from accessing through software the Scan and Fax functions until a reboot is performed.
What this software accomplishes:
After the PC revives from "Stand by" or "Hibernate" mode, the OfficeJet will make the proper reconnections. Scanning and Faxing functions will work normally. Some minor are also included to make the software more robust.
NOTE: This patch should be applied to K-series software version 1.16 or earlier.
Which files are upgraded by this patch:
hpoid407.sys
hpoius07.sys
For more information about Administrator-level access rights go to Windows 2000 help "adding users" or go to www.microsoft.com/windows2000
Downloading Instructions:
For Microsoft Internet Explorer users:
Click on "Download"
Choose the option "Save this program to disk."
Click OK.
You will now be prompted for the location on your hard drive where you would like to save the program. Save the program to your hard drive, making sure to note the drive and directory where the patch gets copied.
After downloading, locate and run the patch file on your hard drive, "HpOj_USBStandby.exe"
Follow the install instructions that appear on the screen.
Restart the PC to complete the installation process.
For Netscape users:
Click on "Download"
Choose the option "Save to disk."
Click OK.
You will now be prompted for the location on your hard drive where you would like to save the program. Save the program to your hard drive, making sure to note the drive and directory where the patch gets copied.
After downloading, locate the patch file on your hard drive, "HpOj_USBStandby.exe", and run it.
Follow the install instructions that appear on the screen. Restart the PC to complete the installation process.
Operating system(s): Microsoft Windows 2000
Download file size: 141.71k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
USB I-O Patch
Operating System
Windows 2000
Version
1.0
Language Driver
Korean
Size Driver
742KB
File Name
usbupdate_windows2000.exe
Observations
Note: This patch is only valid for older versions of the software including versions 1.16, 1.18, and 1.31, as detailed below:
CD Version 1.16, P/N C6748-60033, SW Build A10.03.16
CD Version 1.18, P/N C6748-10003, SW Build A10.03.16
CD Version 1.31, P/N C6748-10004, SW Build A10.02.04 (Asia)
This patch cannot be used on CD Version's 3.00 or later.
Installation Instructions:
Download the file, USBUpdate_Windows2000.exe to a local drive. Make note where (in which folder) the file gets copied.
Temporarily disable any antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
In Windows Explorer (or by some equivalent means) go to the folder where USBUpdate_Windows2000.exe was copied; run the program.
Double-click on the USBUpdate_Windows2000.exe patch file to start it.
Follow the instruction dialogs that appear to install the update.
A restart is necessary after the patch is installed.
Operating system(s): Microsoft Windows 2000
Download file size: 741.51k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
Software and Driver
Operating System
Windows 2000
Version
1
Language Driver
Korean
Size Driver
42.7MB
File Name
oj740en.exe
Observations
NOTE: Components not included in this web package to reduce download time are: PrintCreator; Product Tour; ReadIris application; Network support; and Share2Web.
Operating system(s): Microsoft Windows XP
Download file size: 70.24M
.
Installation Instructions
Download the driver file.
Turn off the hp officejet d series device and disconnect either the USB cable or Parallel port cable.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
Uninstall the previous version of the HP driver software if any is installed. The Windows XP mini-drivers do not need to be removed.
Run the downloaded .exe file. Follow the screen directions presented during the software installation.
For a successful install, you will see a "Software Copied Successfully" screen with a prompt to "follow the instructions on your setup poster to set up your hp officejet d series device."
When the software portion of the installation is complete, you will see a "Software Copied Successfully" dialog box with a prompt to "follow the instructions on your setup poster to set up your hp officejet d series hardware".
Select [Finish] on the "Software Copied Successfully" dialog.
If a request to restart your computer dialog appears, select [yes] to reboot the computer.
Turn on your hp officejet d series device, and if using USB then reconnect the USB cable between it and the computer, or if using the parallel port then reconnect the parallel port cable between it and the computer.
During the Plug & Play phase, a "Found New Hardware Wizard" dialog will appear.
Select [Next], then [Next], then [Finish] buttons to continue. On some computer it may take a few minutes to install the software.
The desktop icon will be created, and the HP system tray icon will appear in the lower-right corner of the taskbar. The HP Fax Setup Wizard or Electronic Registration will appear depending the features of your hp officejet d series device.
Complete the HP Fax Setup Wizard, if it appears.
Complete the Electronic Registration, if you have not already done it once.
When the "Congratulations!" dialog appears, select [Skip Tour], since it is not included in the web driver package.
Upon completing the software installation, enable your antivirus software.
View the Readme file or the Onscreen User Guide for further information related to the operation of this driver software. If you chose the default installation location then the readme.html file will be located in the path:
C:\Program Files\Hewlett-Packard\AiO\hp officejet d series\Help
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
Software and Driver
Operating System
Windows 95
Version
1
Language Driver
Korean
Size Driver
40.7MB
File Name
oj746en.exe
Observations
OfficeJet K60 Windows 95 - Korean
Operating system(s): Microsoft Windows 95
Download file size: 40.72M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
USB I-O Patch
Operating System
Windows 98-Me
Version
1.0
Language Driver
Korean
Size Driver
778KB
File Name
usbupdate_windows9x.exe
Observations
Note: This patch is only valid for older versions of the software including versions 1.16, 1.18, and 1.31, as detailed below:
CD Version 1.16, P/N C6748-60033, SW Build A10.03.16
CD Version 1.18, P/N C6748-10003, SW Build A10.03.16
CD Version 1.31, P/N C6748-10004, SW Build A10.02.04 (Asia)
This patch cannot be used on CD Version's 3.00 or later.
Installation Instructions:
Download the file, USBUpdate_Windows9x.exe to a local drive. Make note where (in which folder) the file gets copied.
Temporarily disable any antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
In Windows Explorer (or by some equivalent means) go to the folder where USBUpdate_Windows9x.exe was copied; run the program.
Double-click on the USBUpdate_Windows9x.exe patch file to start it.
Follow the instruction dialogs that appear to install the update.
A restart is necessary after the patch is installed.
Operating system(s): Microsoft Windows 98, Microsoft Windows ME
Download file size: 777.59k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
Software and Driver
Operating System
Windows 98-Me
Version
1
Language Driver
Korean
Size Driver
41MB
File Name
oj744en.exe
Observations
OfficeJet K60 Windows 98/ME - Korean
Operating system(s): Microsoft Windows 98, Microsoft Windows ME
Download file size: 41.08M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
Millennium TWAIN Software Patch
Operating System
Windows Me
Version
N/A
Language Driver
Korean
Size Driver
56KB
File Name
hpodsr07k.ds
Observations
NOTE:
This patch only applies to customers that are using Windows ME as their operating system.
Symptom:
The Officejet K series "acquire" text scanning feature of the Readiris software will not run.
This software provides you:
A patch file that replaces the Twain scanning file with a newer version.
Operating system(s): Microsoft Windows ME
Download file size: 56.0k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
Software and Driver
Operating System
Windows NT
Version
1
Language Driver
Korean
Size Driver
40.6MB
File Name
oj742en.exe
Observations
NOTE: Components not included in this web package to reduce download time are: PrintCreator; Product Tour; ReadIris application; Network support; and Share2Web.
Operating system(s): Microsoft Windows XP
Download file size: 70.24M
.
Installation Instructions
Download the driver file.
Turn off the hp officejet d series device and disconnect either the USB cable or Parallel port cable.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
Uninstall the previous version of the HP driver software if any is installed. The Windows XP mini-drivers do not need to be removed.
Run the downloaded .exe file. Follow the screen directions presented during the software installation.
For a successful install, you will see a "Software Copied Successfully" screen with a prompt to "follow the instructions on your setup poster to set up your hp officejet d series device."
When the software portion of the installation is complete, you will see a "Software Copied Successfully" dialog box with a prompt to "follow the instructions on your setup poster to set up your hp officejet d series hardware".
Select [Finish] on the "Software Copied Successfully" dialog.
If a request to restart your computer dialog appears, select [yes] to reboot the computer.
Turn on your hp officejet d series device, and if using USB then reconnect the USB cable between it and the computer, or if using the parallel port then reconnect the parallel port cable between it and the computer.
During the Plug & Play phase, a "Found New Hardware Wizard" dialog will appear.
Select [Next], then [Next], then [Finish] buttons to continue. On some computer it may take a few minutes to install the software.
The desktop icon will be created, and the HP system tray icon will appear in the lower-right corner of the taskbar. The HP Fax Setup Wizard or Electronic Registration will appear depending the features of your hp officejet d series device.
Complete the HP Fax Setup Wizard, if it appears.
Complete the Electronic Registration, if you have not already done it once.
When the "Congratulations!" dialog appears, select [Skip Tour], since it is not included in the web driver package.
Upon completing the software installation, enable your antivirus software.
View the Readme file or the Onscreen User Guide for further information related to the operation of this driver software. If you chose the default installation location then the readme.html file will be located in the path:
C:\Program Files\Hewlett-Packard\AiO\hp officejet d series\Help
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
Software and Driver
Operating System
Windows XP
Version
3.10 (A.14.05.09)
Language Driver
Korean
Size Driver
67.4MB
File Name
a140509_kor_xp.exe
Observations
There is one major new functionality of this driver as listed below:
The Parallel Port is now supported in addition to USB. This driver replaces previous versions of the HP OfficeJet K Series drivers as defined below:
For Windows XP customers this driver replaces driver Version 3.00.
Notice: If you intend to use both a HP OfficeJet K Series and HP OfficeJet G Series All-In-One device on the same PC, there is an uncommon scenario where the OfficeJet G Series will not work. All three of the following conditions must be met in order to experience this situation:
Your OfficeJet K Series has Firmware Version 4.04.
Your OfficeJet K Series is installed on the Parallel Port.
You intend to install an OfficeJet G Series device either on this same computer using a second Parallel Port or on the same Parallel Port at a later time.
If you have not met ALL of these conditions, then you will NOT experience this problem and may proceed. If you expect to encounter all these conditions in the future then do not install this driver. If you are unsure, then contact HP support for further direction.
Follow these steps to determine your HP Officejet K Series device's firmware version:
Simultaneously press and hold the [ENTER] and [Cancel] buttons (this will take two hands for most people)
Release both buttons at the same time
Wait for the "Extended Self-Test Report" to print out.
Look at the "Firmware Version" in the lower third of the page, the left hand column, about the sixth item down. Your device has firmware 4.04 if you see the "Firmware Version: OD404R" on the printout.
Operating system(s): Microsoft Windows XP
Download file size: 67.43M
.
Installation Instructions
Download the web package driver file.
Turn off the HP OfficeJet K Series device and disconnect either the USB cable or Parallel port cable.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
Uninstall the previous version of the HP driver software if any is installed. The Windows XP mini-drivers do not need to be removed.
Run the downloaded .exe file. Follow the screen directions presented during the software installation.
When the software portion of the installation is complete, you will see a "Software Copied Successfully" dialog box with a prompt to "follow the instructions on your setup poster to set up your HP OfficeJet K Series hardware". The instructions below are contained in your setup poster.
Select [Finish] on the "Software Copied Successfully" dialog.
If a request to restart your computer dialog appears, select [yes] to reboot the computer.
Turn on your HP OfficeJet K Series device, and if using USB then reconnect the USB cable between it and the computer, or if using the parallel port then reconnect the parallel port cable between it and the computer.
During the Plug & Play phase, a "Found New Hardware Wizard" dialog will appear.
Select [Next], then [Next], then [Finish] buttons to continue. On some computer it may take a few minutes to install the software.
The desktop icon will be created, and the HP system tray icon will appear in the lower-right corner of the taskbar. The HP Fax Setup Wizard or Electronic Registration will appear depending the features of your HP OfficeJet K Series device.
Complete the HP Fax Setup Wizard, if it appears.
Complete the Electronic Registration, if you have not already done it once.
When the "Congratulations!" dialog appears, select [Skip Tour], since it is not included in the web driver package.
Upon completing the software installation, enable your antivirus software.
View the Readme file or the Onscreen User Guide for further information related to the operation of this driver software. If you chose the default installation location then the Readme.html file will be located in the path:
C:\Program Files\Hewlett-Packard\AiO\hp officejet k series\Help
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
Stand by mode Driver Patch
Operating System
Windows 2000
Version
N/A
Language Driver
Portuguese
Size Driver
142KB
File Name
hpoj_usbstandby.exe
Observations
Description:
This patch is for users running Windows 2000 with a G, V, K, or PSC 700 Series OfficeJet connected to the PC by USB cable. To apply this patch, the user must have Administrator-level access rights for the PC that exhibits the symptom described below.
Symptom:
Under Windows 2000, after a PC comes out of "Stand by" or "Hibernate" mode, the OfficeJet does not reconnect. This prevents users from accessing through software the Scan and Fax functions until a reboot is performed.
What this software accomplishes:
After the PC revives from "Stand by" or "Hibernate" mode, the OfficeJet will make the proper reconnections. Scanning and Faxing functions will work normally. Some minor are also included to make the software more robust.
NOTE: This patch should be applied to K-series software version 1.16 or earlier.
Which files are upgraded by this patch:
hpoid407.sys
hpoius07.sys
For more information about Administrator-level access rights go to Windows 2000 help "adding users" or go to www.microsoft.com/windows2000
Downloading Instructions:
For Microsoft Internet Explorer users:
Click on "Download"
Choose the option "Save this program to disk."
Click OK.
You will now be prompted for the location on your hard drive where you would like to save the program. Save the program to your hard drive, making sure to note the drive and directory where the patch gets copied.
After downloading, locate and run the patch file on your hard drive, "HpOj_USBStandby.exe"
Follow the install instructions that appear on the screen.
Restart the PC to complete the installation process.
For Netscape users:
Click on "Download"
Choose the option "Save to disk."
Click OK.
You will now be prompted for the location on your hard drive where you would like to save the program. Save the program to your hard drive, making sure to note the drive and directory where the patch gets copied.
After downloading, locate the patch file on your hard drive, "HpOj_USBStandby.exe", and run it.
Follow the install instructions that appear on the screen. Restart the PC to complete the installation process.
Operating system(s): Microsoft Windows 2000
Download file size: 141.71k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
USB I-O Patch
Operating System
Windows 2000
Version
1.0
Language Driver
Portuguese
Size Driver
742KB
File Name
usbupdate_windows2000.exe
Observations
Note: This patch is only valid for older versions of the software including versions 1.16, 1.18, and 1.31, as detailed below:
CD Version 1.16, P/N C6748-60033, SW Build A10.03.16
CD Version 1.18, P/N C6748-10003, SW Build A10.03.16
CD Version 1.31, P/N C6748-10004, SW Build A10.02.04 (Asia)
This patch cannot be used on CD Version's 3.00 or later.
Installation Instructions:
Download the file, USBUpdate_Windows2000.exe to a local drive. Make note where (in which folder) the file gets copied.
Temporarily disable any antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
In Windows Explorer (or by some equivalent means) go to the folder where USBUpdate_Windows2000.exe was copied; run the program.
Double-click on the USBUpdate_Windows2000.exe patch file to start it.
Follow the instruction dialogs that appear to install the update.
A restart is necessary after the patch is installed.
Operating system(s): Microsoft Windows 2000
Download file size: 741.51k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
Driver Web Package for both USB and Parallel Ports
Operating System
Windows 2000
Version
3.10 (A.14.05.09)
Language Driver
Portuguese
Size Driver
67.2MB
File Name
a140509_ptg_2k.exe
Observations
There is one major new functionality of this driver as listed below:
The Parallel Port is now supported in addition to USB.
This driver replaces previous versions of the HP OfficeJet K Series drivers as defined below:
For Windows 2000 customers this driver replaces drivers Version 1.16, 1.18, 1.31, or earlier.
Notice: If you intend to use both a HP OfficeJet K Series and HP OfficeJet G Series All-In-One device on the same PC, there is an uncommon scenario where the OfficeJet G Series will not work. All three of the following conditions must be met in order to experience this situation:
Your OfficeJet K Series has Firmware Version 4.04.
Your OfficeJet K Series is installed on the Parallel Port.
You intend to install an OfficeJet G Series device either on this same computer using a second Parallel Port or on the same Parallel Port at a later time.
If you have not met ALL of these conditions, then you will NOT experience this problem and may proceed. If you expect to encounter all these conditions in the future then do not install this driver. If you are unsure, then contact HP support for further direction.
Follow these steps to determine your HP Officejet K Series device's firmware version:
Simultaneously press and hold the [ENTER] and [Cancel] buttons (this will take two hands for most people)
Release both buttons at the same time
Wait for the "Extended Self-Test Report" to print out.
Look at the "Firmware Version" in the lower third of the page, the left hand column, about the sixth item down. Your device has firmware 4.04 if you see the "Firmware Version: OD404R" on the printout.
The specific OfficeJet K Series Driver Version 3.10 Installation Instructions follow:
Download the web package driver file.
Turn off the HP Officejet device and unplug the USB cable. If using the parallel port connector it should remain connected.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
Uninstall the previously version of the software (Click Start, click All Programs, point to HP Officejet, and then click Uninstall Software)
Run the downloaded .exe file. Follow the screen directions presented during the software installation.
When the software portion of the installation is complete, you will see a "Software Copied Successfully" dialog box with a prompt to "follow the instructions on your setup poster to set up your HP OfficeJet K Series hardware". The instructions below are contained in your setup poster.
Select [Finish] on the "Software Copied Successfully" dialog.
If a request to restart your computer dialog appears, select [yes] to reboot the computer.
Turn on your HP OfficeJet K Series device, and if using USB then connect the USB cable. If using the parallel port, and the parallel port connector was not connected as instructed in step 1 above, then connect the parallel port cable and perform a second reboot of the computer now.
After the Add New Hardware dialogs, an "Install HP software" dialog will appear.
Select [Next]. NOTE: The ReadIris application and HP instant support are not included with the Web download. Wait for the HP software to start and the HP Fax Setup Wizard to appear.
Complete the HP Fax Setup Wizard, if it appears.
Complete the Electronic Registration, if you have not already done it once.
When "Congratulations!" appears, select [Skip Tour], since it is not included in the web driver package.
Upon completing the software installation, enable your antivirus software.
View the Readme file or the Onscreen User Guide for further information related to the operation of this driver software. If you chose the default installation location then the Readme.html file will be located in the path:
C:\Program Files\Hewlett-Packard\AiO\hp officejet k series\Help
Operating system(s): Microsoft Windows 2000
Download file size: 67.27M
.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
Driver
Operating System
Windows 95
Version
1.16
Language Driver
Portuguese
Size Driver
40.5MB
File Name
oj746pr.exe
Observations
This driver has been updated to remove the netdirect features. Other features that have been removed to reduce the driver download file size are the bundled software and the product tour.
This driver is designed for use on computers that will be connected to the OfficeJet K series from the computer's Parallel port or USB port. When installing the OfficeJet K series via a parallel port the computers ECP mode must be turned on.
Download and installation Instructions:
The Officejet K series must be turned off and the Parallel or USB cable must be unplugged from the computer before proceeding!
Download the driver software.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, multimedia applications.
Uninstall any previous versions of the Officejet K series software.
To start the software installation locate and click on the downloaded driver file you saved to your computer's hard drive.
Follow the screen directions presented during software installation.
For a successful install you will see a "Select Cable Type" screen with options for how to connect your OfficeJet K series with a parallel or USB cable.
Select a cable choice and follow the instructions for connecting the OfficeJet K series to your computer.
Upon completing the software installation enable the antivirus software.
Operating system(s): Microsoft Windows 95
Download file size: 40.51M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
USB I-O Patch
Operating System
Windows 98-Me
Version
1.0
Language Driver
Portuguese
Size Driver
778KB
File Name
usbupdate_windows9x.exe
Observations
Note: This patch is only valid for older versions of the software including versions 1.16, 1.18, and 1.31, as detailed below:
CD Version 1.16, P/N C6748-60033, SW Build A10.03.16
CD Version 1.18, P/N C6748-10003, SW Build A10.03.16
CD Version 1.31, P/N C6748-10004, SW Build A10.02.04 (Asia)
This patch cannot be used on CD Version's 3.00 or later.
Installation Instructions:
Download the file, USBUpdate_Windows9x.exe to a local drive. Make note where (in which folder) the file gets copied.
Temporarily disable any antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
In Windows Explorer (or by some equivalent means) go to the folder where USBUpdate_Windows9x.exe was copied; run the program.
Double-click on the USBUpdate_Windows9x.exe patch file to start it.
Follow the instruction dialogs that appear to install the update.
A restart is necessary after the patch is installed.
Operating system(s): Microsoft Windows 98, Microsoft Windows ME
Download file size: 777.59k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
Millennium TWAIN Software Patch
Operating System
Windows Me
Version
N/A
Language Driver
Portuguese
Size Driver
56KB
File Name
hpodsr07k.ds
Observations
NOTE:
This patch only applies to customers that are using Windows ME as their operating system.
Symptom:
The Officejet K series "acquire" text scanning feature of the Readiris software will not run.
This software provides you:
A patch file that replaces the Twain scanning file with a newer version.
Operating system(s): Microsoft Windows ME
Download file size: 56.0k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
Driver
Operating System
Windows NT4
Version
1.16
Language Driver
Portuguese
Size Driver
40.4MB
File Name
oj742pr.exe
Observations
This driver has been updated to remove the netdirect features. Other features that have been removed to reduce the driver download file size are the bundled software and the product tour.
This driver is designed for use on computers that will be connected to the OfficeJet K series from the computer's Parallel port or USB port. When installing the OfficeJet K series via a parallel port the computers ECP mode must be turned on.
Download and installation Instructions:
The Officejet K series must be turned off and the Parallel or USB cable must be unplugged from the computer before proceeding!
Download the driver software.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, multimedia applications.
Uninstall any previous versions of the Officejet K series software.
To start the software installation locate and click on the downloaded driver file you saved to your computer's hard drive.
Follow the screen directions presented during software installation.
For a successful install you will see a "Select Cable Type" screen with options for how to connect your OfficeJet K series with a parallel or USB cable.
Select a cable choice and follow the instructions for connecting the OfficeJet K series to your computer.
Upon completing the software installation enable the antivirus software.
Operating system(s): Microsoft Windows NT 4.0
Download file size: 40.47M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
Software and Driver
Operating System
Windows XP
Version
3.10 (A.14.05.09)
Language Driver
Portuguese
Size Driver
67.2MB
File Name
a140509_ptg_xp.exe
Observations
There is one major new functionality of this driver as listed below:
The Parallel Port is now supported in addition to USB. This driver replaces previous versions of the HP OfficeJet K Series drivers as defined below:
For Windows XP customers this driver replaces driver Version 3.00.
Notice: If you intend to use both a HP OfficeJet K Series and HP OfficeJet G Series All-In-One device on the same PC, there is an uncommon scenario where the OfficeJet G Series will not work. All three of the following conditions must be met in order to experience this situation:
Your OfficeJet K Series has Firmware Version 4.04.
Your OfficeJet K Series is installed on the Parallel Port.
You intend to install an OfficeJet G Series device either on this same computer using a second Parallel Port or on the same Parallel Port at a later time.
If you have not met ALL of these conditions, then you will NOT experience this problem and may proceed. If you expect to encounter all these conditions in the future then do not install this driver. If you are unsure, then contact HP support for further direction.
Follow these steps to determine your HP Officejet K Series device's firmware version:
Simultaneously press and hold the [ENTER] and [Cancel] buttons (this will take two hands for most people)
Release both buttons at the same time
Wait for the "Extended Self-Test Report" to print out.
Look at the "Firmware Version" in the lower third of the page, the left hand column, about the sixth item down. Your device has firmware 4.04 if you see the "Firmware Version: OD404R" on the printout.
Operating system(s): Microsoft Windows XP
Download file size: 67.21M
.
Installation Instructions
Download the web package driver file.
Turn off the HP OfficeJet K Series device and disconnect either the USB cable or Parallel port cable.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
Uninstall the previous version of the HP driver software if any is installed. The Windows XP mini-drivers do not need to be removed.
Run the downloaded .exe file. Follow the screen directions presented during the software installation.
When the software portion of the installation is complete, you will see a "Software Copied Successfully" dialog box with a prompt to "follow the instructions on your setup poster to set up your HP OfficeJet K Series hardware". The instructions below are contained in your setup poster.
Select [Finish] on the "Software Copied Successfully" dialog.
If a request to restart your computer dialog appears, select [yes] to reboot the computer.
Turn on your HP OfficeJet K Series device, and if using USB then reconnect the USB cable between it and the computer, or if using the parallel port then reconnect the parallel port cable between it and the computer.
During the Plug & Play phase, a "Found New Hardware Wizard" dialog will appear.
Select [Next], then [Next], then [Finish] buttons to continue. On some computer it may take a few minutes to install the software.
The desktop icon will be created, and the HP system tray icon will appear in the lower-right corner of the taskbar. The HP Fax Setup Wizard or Electronic Registration will appear depending the features of your HP OfficeJet K Series device.
Complete the HP Fax Setup Wizard, if it appears.
Complete the Electronic Registration, if you have not already done it once.
When the "Congratulations!" dialog appears, select [Skip Tour], since it is not included in the web driver package.
Upon completing the software installation, enable your antivirus software.
View the Readme file or the Onscreen User Guide for further information related to the operation of this driver software. If you chose the default installation location then the Readme.html file will be located in the path:
C:\Program Files\Hewlett-Packard\AiO\hp officejet k series\Help
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
Stand by mode Driver Patch
Operating System
Windows 2000
Version
N/A
Language Driver
Portuguese Brazilian
Size Driver
142KB
File Name
hpoj_usbstandby.exe
Observations
Description:
This patch is for users running Windows 2000 with a G, V, K, or PSC 700 Series OfficeJet connected to the PC by USB cable. To apply this patch, the user must have Administrator-level access rights for the PC that exhibits the symptom described below.
Symptom:
Under Windows 2000, after a PC comes out of "Stand by" or "Hibernate" mode, the OfficeJet does not reconnect. This prevents users from accessing through software the Scan and Fax functions until a reboot is performed.
What this software accomplishes:
After the PC revives from "Stand by" or "Hibernate" mode, the OfficeJet will make the proper reconnections. Scanning and Faxing functions will work normally. Some minor are also included to make the software more robust.
NOTE: This patch should be applied to K-series software version 1.16 or earlier.
Which files are upgraded by this patch:
hpoid407.sys
hpoius07.sys
For more information about Administrator-level access rights go to Windows 2000 help "adding users" or go to www.microsoft.com/windows2000
Downloading Instructions:
For Microsoft Internet Explorer users:
Click on "Download"
Choose the option "Save this program to disk."
Click OK.
You will now be prompted for the location on your hard drive where you would like to save the program. Save the program to your hard drive, making sure to note the drive and directory where the patch gets copied.
After downloading, locate and run the patch file on your hard drive, "HpOj_USBStandby.exe"
Follow the install instructions that appear on the screen.
Restart the PC to complete the installation process.
For Netscape users:
Click on "Download"
Choose the option "Save to disk."
Click OK.
You will now be prompted for the location on your hard drive where you would like to save the program. Save the program to your hard drive, making sure to note the drive and directory where the patch gets copied.
After downloading, locate the patch file on your hard drive, "HpOj_USBStandby.exe", and run it.
Follow the install instructions that appear on the screen. Restart the PC to complete the installation process.
Operating system(s): Microsoft Windows 2000
Download file size: 141.71k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
USB I-O Patch
Operating System
Windows 2000
Version
1.0
Language Driver
Portuguese Brazilian
Size Driver
742KB
File Name
usbupdate_windows2000.exe
Observations
Note: This patch is only valid for older versions of the software including versions 1.16, 1.18, and 1.31, as detailed below:
CD Version 1.16, P/N C6748-60033, SW Build A10.03.16
CD Version 1.18, P/N C6748-10003, SW Build A10.03.16
CD Version 1.31, P/N C6748-10004, SW Build A10.02.04 (Asia)
This patch cannot be used on CD Version's 3.00 or later.
Installation Instructions:
Download the file, USBUpdate_Windows2000.exe to a local drive. Make note where (in which folder) the file gets copied.
Temporarily disable any antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
In Windows Explorer (or by some equivalent means) go to the folder where USBUpdate_Windows2000.exe was copied; run the program.
Double-click on the USBUpdate_Windows2000.exe patch file to start it.
Follow the instruction dialogs that appear to install the update.
A restart is necessary after the patch is installed.
Operating system(s): Microsoft Windows 2000
Download file size: 741.51k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
Driver Web Package for both USB and Parallel Ports
Operating System
Windows 2000
Version
3.10 (A.14.05.09)
Language Driver
Portuguese Brazilian
Size Driver
67.2MB
File Name
a140509_ptg_2k.exe
Observations
There is one major new functionality of this driver as listed below:
The Parallel Port is now supported in addition to USB.
This driver replaces previous versions of the HP OfficeJet K Series drivers as defined below:
For Windows 2000 customers this driver replaces drivers Version 1.16, 1.18, 1.31, or earlier.
Notice: If you intend to use both a HP OfficeJet K Series and HP OfficeJet G Series All-In-One device on the same PC, there is an uncommon scenario where the OfficeJet G Series will not work. All three of the following conditions must be met in order to experience this situation:
Your OfficeJet K Series has Firmware Version 4.04.
Your OfficeJet K Series is installed on the Parallel Port.
You intend to install an OfficeJet G Series device either on this same computer using a second Parallel Port or on the same Parallel Port at a later time.
If you have not met ALL of these conditions, then you will NOT experience this problem and may proceed. If you expect to encounter all these conditions in the future then do not install this driver. If you are unsure, then contact HP support for further direction.
Follow these steps to determine your HP Officejet K Series device's firmware version:
Simultaneously press and hold the [ENTER] and [Cancel] buttons (this will take two hands for most people)
Release both buttons at the same time
Wait for the "Extended Self-Test Report" to print out.
Look at the "Firmware Version" in the lower third of the page, the left hand column, about the sixth item down. Your device has firmware 4.04 if you see the "Firmware Version: OD404R" on the printout.
The specific OfficeJet K Series Driver Version 3.10 Installation Instructions follow:
Download the web package driver file.
Turn off the HP Officejet device and unplug the USB cable. If using the parallel port connector it should remain connected.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
Uninstall the previously version of the software (Click Start, click All Programs, point to HP Officejet, and then click Uninstall Software)
Run the downloaded .exe file. Follow the screen directions presented during the software installation.
When the software portion of the installation is complete, you will see a "Software Copied Successfully" dialog box with a prompt to "follow the instructions on your setup poster to set up your HP OfficeJet K Series hardware". The instructions below are contained in your setup poster.
Select [Finish] on the "Software Copied Successfully" dialog.
If a request to restart your computer dialog appears, select [yes] to reboot the computer.
Turn on your HP OfficeJet K Series device, and if using USB then connect the USB cable. If using the parallel port, and the parallel port connector was not connected as instructed in step 1 above, then connect the parallel port cable and perform a second reboot of the computer now.
After the Add New Hardware dialogs, an "Install HP software" dialog will appear.
Select [Next]. NOTE: The ReadIris application and HP instant support are not included with the Web download. Wait for the HP software to start and the HP Fax Setup Wizard to appear.
Complete the HP Fax Setup Wizard, if it appears.
Complete the Electronic Registration, if you have not already done it once.
When "Congratulations!" appears, select [Skip Tour], since it is not included in the web driver package.
Upon completing the software installation, enable your antivirus software.
View the Readme file or the Onscreen User Guide for further information related to the operation of this driver software. If you chose the default installation location then the Readme.html file will be located in the path:
C:\Program Files\Hewlett-Packard\AiO\hp officejet k series\Help
Operating system(s): Microsoft Windows 2000
Download file size: 67.27M
.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
Driver
Operating System
Windows 95
Version
1.16
Language Driver
Portuguese Brazilian
Size Driver
40.5MB
File Name
oj746pr.exe
Observations
This driver has been updated to remove the netdirect features. Other features that have been removed to reduce the driver download file size are the bundled software and the product tour.
This driver is designed for use on computers that will be connected to the OfficeJet K series from the computer's Parallel port or USB port. When installing the OfficeJet K series via a parallel port the computers ECP mode must be turned on.
Download and installation Instructions:
The Officejet K series must be turned off and the Parallel or USB cable must be unplugged from the computer before proceeding!
Download the driver software.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, multimedia applications.
Uninstall any previous versions of the Officejet K series software.
To start the software installation locate and click on the downloaded driver file you saved to your computer's hard drive.
Follow the screen directions presented during software installation.
For a successful install you will see a "Select Cable Type" screen with options for how to connect your OfficeJet K series with a parallel or USB cable.
Select a cable choice and follow the instructions for connecting the OfficeJet K series to your computer.
Upon completing the software installation enable the antivirus software.
Operating system(s): Microsoft Windows 95
Download file size: 40.51M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
USB I-O Patch
Operating System
Windows 98-Me
Version
1.0
Language Driver
Portuguese Brazilian
Size Driver
778KB
File Name
usbupdate_windows9x.exe
Observations
Note: This patch is only valid for older versions of the software including versions 1.16, 1.18, and 1.31, as detailed below:
CD Version 1.16, P/N C6748-60033, SW Build A10.03.16
CD Version 1.18, P/N C6748-10003, SW Build A10.03.16
CD Version 1.31, P/N C6748-10004, SW Build A10.02.04 (Asia)
This patch cannot be used on CD Version's 3.00 or later.
Installation Instructions:
Download the file, USBUpdate_Windows9x.exe to a local drive. Make note where (in which folder) the file gets copied.
Temporarily disable any antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
In Windows Explorer (or by some equivalent means) go to the folder where USBUpdate_Windows9x.exe was copied; run the program.
Double-click on the USBUpdate_Windows9x.exe patch file to start it.
Follow the instruction dialogs that appear to install the update.
A restart is necessary after the patch is installed.
Operating system(s): Microsoft Windows 98, Microsoft Windows ME
Download file size: 777.59k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
Millennium TWAIN Software Patch
Operating System
Windows Me
Version
N/A
Language Driver
Portuguese Brazilian
Size Driver
56KB
File Name
hpodsr07k.ds
Observations
NOTE:
This patch only applies to customers that are using Windows ME as their operating system.
Symptom:
The Officejet K series "acquire" text scanning feature of the Readiris software will not run.
This software provides you:
A patch file that replaces the Twain scanning file with a newer version.
Operating system(s): Microsoft Windows ME
Download file size: 56.0k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
Driver
Operating System
Windows NT4
Version
1.16
Language Driver
Portuguese Brazilian
Size Driver
40.4MB
File Name
oj742pr.exe
Observations
This driver has been updated to remove the netdirect features. Other features that have been removed to reduce the driver download file size are the bundled software and the product tour.
This driver is designed for use on computers that will be connected to the OfficeJet K series from the computer's Parallel port or USB port. When installing the OfficeJet K series via a parallel port the computers ECP mode must be turned on.
Download and installation Instructions:
The Officejet K series must be turned off and the Parallel or USB cable must be unplugged from the computer before proceeding!
Download the driver software.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, multimedia applications.
Uninstall any previous versions of the Officejet K series software.
To start the software installation locate and click on the downloaded driver file you saved to your computer's hard drive.
Follow the screen directions presented during software installation.
For a successful install you will see a "Select Cable Type" screen with options for how to connect your OfficeJet K series with a parallel or USB cable.
Select a cable choice and follow the instructions for connecting the OfficeJet K series to your computer.
Upon completing the software installation enable the antivirus software.
Operating system(s): Microsoft Windows NT 4.0
Download file size: 40.47M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
Software and Driver
Operating System
Windows XP
Version
3.10 (A.14.05.09)
Language Driver
Portuguese Brazilian
Size Driver
67.2MB
File Name
a140509_ptg_xp.exe
Observations
There is one major new functionality of this driver as listed below:
The Parallel Port is now supported in addition to USB. This driver replaces previous versions of the HP OfficeJet K Series drivers as defined below:
For Windows XP customers this driver replaces driver Version 3.00.
Notice: If you intend to use both a HP OfficeJet K Series and HP OfficeJet G Series All-In-One device on the same PC, there is an uncommon scenario where the OfficeJet G Series will not work. All three of the following conditions must be met in order to experience this situation:
Your OfficeJet K Series has Firmware Version 4.04.
Your OfficeJet K Series is installed on the Parallel Port.
You intend to install an OfficeJet G Series device either on this same computer using a second Parallel Port or on the same Parallel Port at a later time.
If you have not met ALL of these conditions, then you will NOT experience this problem and may proceed. If you expect to encounter all these conditions in the future then do not install this driver. If you are unsure, then contact HP support for further direction.
Follow these steps to determine your HP Officejet K Series device's firmware version:
Simultaneously press and hold the [ENTER] and [Cancel] buttons (this will take two hands for most people)
Release both buttons at the same time
Wait for the "Extended Self-Test Report" to print out.
Look at the "Firmware Version" in the lower third of the page, the left hand column, about the sixth item down. Your device has firmware 4.04 if you see the "Firmware Version: OD404R" on the printout.
Operating system(s): Microsoft Windows XP
Download file size: 67.21M
.
Installation Instructions
Download the web package driver file.
Turn off the HP OfficeJet K Series device and disconnect either the USB cable or Parallel port cable.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
Uninstall the previous version of the HP driver software if any is installed. The Windows XP mini-drivers do not need to be removed.
Run the downloaded .exe file. Follow the screen directions presented during the software installation.
When the software portion of the installation is complete, you will see a "Software Copied Successfully" dialog box with a prompt to "follow the instructions on your setup poster to set up your HP OfficeJet K Series hardware". The instructions below are contained in your setup poster.
Select [Finish] on the "Software Copied Successfully" dialog.
If a request to restart your computer dialog appears, select [yes] to reboot the computer.
Turn on your HP OfficeJet K Series device, and if using USB then reconnect the USB cable between it and the computer, or if using the parallel port then reconnect the parallel port cable between it and the computer.
During the Plug & Play phase, a "Found New Hardware Wizard" dialog will appear.
Select [Next], then [Next], then [Finish] buttons to continue. On some computer it may take a few minutes to install the software.
The desktop icon will be created, and the HP system tray icon will appear in the lower-right corner of the taskbar. The HP Fax Setup Wizard or Electronic Registration will appear depending the features of your HP OfficeJet K Series device.
Complete the HP Fax Setup Wizard, if it appears.
Complete the Electronic Registration, if you have not already done it once.
When the "Congratulations!" dialog appears, select [Skip Tour], since it is not included in the web driver package.
Upon completing the software installation, enable your antivirus software.
View the Readme file or the Onscreen User Guide for further information related to the operation of this driver software. If you chose the default installation location then the Readme.html file will be located in the path:
C:\Program Files\Hewlett-Packard\AiO\hp officejet k series\Help
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
USB I-O Patch
Operating System
Windows 2000
Version
1.0
Language Driver
Spanish
Size Driver
742KB
File Name
usbupdate_windows2000.exe
Observations
Note: This patch is only valid for older versions of the software including versions 1.16, 1.18, and 1.31, as detailed below:
CD Version 1.16, P/N C6748-60033, SW Build A10.03.16
CD Version 1.18, P/N C6748-10003, SW Build A10.03.16
CD Version 1.31, P/N C6748-10004, SW Build A10.02.04 (Asia)
This patch cannot be used on CD Version's 3.00 or later.
Installation Instructions:
Download the file, USBUpdate_Windows2000.exe to a local drive. Make note where (in which folder) the file gets copied.
Temporarily disable any antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
In Windows Explorer (or by some equivalent means) go to the folder where USBUpdate_Windows2000.exe was copied; run the program.
Double-click on the USBUpdate_Windows2000.exe patch file to start it.
Follow the instruction dialogs that appear to install the update.
A restart is necessary after the patch is installed.
Operating system(s): Microsoft Windows 2000
Download file size: 741.51k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
Driver Web Package for both USB and Parallel Ports
Operating System
Windows 2000
Version
3.10 (A.14.05.09)
Language Driver
Spanish
Size Driver
67.2MB
File Name
a140509_esn_2k.exe
Observations
There is one major new functionality of this driver as listed below:
The Parallel Port is now supported in addition to USB.
This driver replaces previous versions of the HP OfficeJet K Series drivers as defined below:
For Windows 2000 customers this driver replaces drivers Version 1.16, 1.18, 1.31, or earlier.
Notice: If you intend to use both a HP OfficeJet K Series and HP OfficeJet G Series All-In-One device on the same PC, there is an uncommon scenario where the OfficeJet G Series will not work. All three of the following conditions must be met in order to experience this situation:
Your OfficeJet K Series has Firmware Version 4.04.
Your OfficeJet K Series is installed on the Parallel Port.
You intend to install an OfficeJet G Series device either on this same computer using a second Parallel Port or on the same Parallel Port at a later time.
If you have not met ALL of these conditions, then you will NOT experience this problem and may proceed. If you expect to encounter all these conditions in the future then do not install this driver. If you are unsure, then contact HP support for further direction.
Follow these steps to determine your HP Officejet K Series device's firmware version:
Simultaneously press and hold the [ENTER] and [Cancel] buttons (this will take two hands for most people)
Release both buttons at the same time
Wait for the "Extended Self-Test Report" to print out.
Look at the "Firmware Version" in the lower third of the page, the left hand column, about the sixth item down. Your device has firmware 4.04 if you see the "Firmware Version: OD404R" on the printout.
The specific OfficeJet K Series Driver Version 3.10 Installation Instructions follow:
Download the web package driver file.
Turn off the HP Officejet device and unplug the USB cable. If using the parallel port connector it should remain connected.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
Uninstall the previously version of the software (Click Start, click All Programs, point to HP Officejet, and then click Uninstall Software)
Run the downloaded .exe file. Follow the screen directions presented during the software installation.
When the software portion of the installation is complete, you will see a "Software Copied Successfully" dialog box with a prompt to "follow the instructions on your setup poster to set up your HP OfficeJet K Series hardware". The instructions below are contained in your setup poster.
Select [Finish] on the "Software Copied Successfully" dialog.
If a request to restart your computer dialog appears, select [yes] to reboot the computer.
Turn on your HP OfficeJet K Series device, and if using USB then connect the USB cable. If using the parallel port, and the parallel port connector was not connected as instructed in step 1 above, then connect the parallel port cable and perform a second reboot of the computer now.
After the Add New Hardware dialogs, an "Install HP software" dialog will appear.
Select [Next]. NOTE: The ReadIris application and HP instant support are not included with the Web download. Wait for the HP software to start and the HP Fax Setup Wizard to appear.
Complete the HP Fax Setup Wizard, if it appears.
Complete the Electronic Registration, if you have not already done it once.
When "Congratulations!" appears, select [Skip Tour], since it is not included in the web driver package.
Upon completing the software installation, enable your antivirus software.
View the Readme file or the Onscreen User Guide for further information related to the operation of this driver software. If you chose the default installation location then the Readme.html file will be located in the path:
C:\Program Files\Hewlett-Packard\AiO\hp officejet k series\Help
Operating system(s): Microsoft Windows 2000
Download file size: 67.27M
.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
Stand by mode Driver Patch
Operating System
Windows 2000
Version
N/A
Language Driver
Spanish
Size Driver
142KB
File Name
hpoj_usbstandby.exe
Observations
Description:
This patch is for users running Windows 2000 with a G, V, K, or PSC 700 Series OfficeJet connected to the PC by USB cable. To apply this patch, the user must have Administrator-level access rights for the PC that exhibits the symptom described below.
Symptom:
Under Windows 2000, after a PC comes out of "Stand by" or "Hibernate" mode, the OfficeJet does not reconnect. This prevents users from accessing through software the Scan and Fax functions until a reboot is performed.
What this software accomplishes:
After the PC revives from "Stand by" or "Hibernate" mode, the OfficeJet will make the proper reconnections. Scanning and Faxing functions will work normally. Some minor are also included to make the software more robust.
NOTE: This patch should be applied to K-series software version 1.16 or earlier.
Which files are upgraded by this patch:
hpoid407.sys
hpoius07.sys
For more information about Administrator-level access rights go to Windows 2000 help "adding users" or go to www.microsoft.com/windows2000
Downloading Instructions:
For Microsoft Internet Explorer users:
Click on "Download"
Choose the option "Save this program to disk."
Click OK.
You will now be prompted for the location on your hard drive where you would like to save the program. Save the program to your hard drive, making sure to note the drive and directory where the patch gets copied.
After downloading, locate and run the patch file on your hard drive, "HpOj_USBStandby.exe"
Follow the install instructions that appear on the screen.
Restart the PC to complete the installation process.
For Netscape users:
Click on "Download"
Choose the option "Save to disk."
Click OK.
You will now be prompted for the location on your hard drive where you would like to save the program. Save the program to your hard drive, making sure to note the drive and directory where the patch gets copied.
After downloading, locate the patch file on your hard drive, "HpOj_USBStandby.exe", and run it.
Follow the install instructions that appear on the screen. Restart the PC to complete the installation process.
Operating system(s): Microsoft Windows 2000
Download file size: 141.71k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
Driver
Operating System
Windows 95
Version
1.16
Language Driver
Spanish
Size Driver
40.5MB
File Name
oj746sp.exe
Observations
This driver has been updated to remove the netdirect features. Other features that have been removed to reduce the driver download file size are the bundled software and the product tour.
This driver is designed for use on computers that will be connected to the OfficeJet K series from the computer's Parallel port or USB port. When installing the OfficeJet K series via a parallel port the computers ECP mode must be turned on.
Download and installation Instructions:
The Officejet K series must be turned off and the Parallel or USB cable must be unplugged from the computer before proceeding!
Download the driver software.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, multimedia applications.
Uninstall any previous versions of the Officejet K series software.
To start the software installation locate and click on the downloaded driver file you saved to your computer's hard drive.
Follow the screen directions presented during software installation.
For a successful install you will see a "Select Cable Type" screen with options for how to connect your OfficeJet K series with a parallel or USB cable.
Select a cable choice and follow the instructions for connecting the OfficeJet K series to your computer.
Upon completing the software installation enable the antivirus software.
Operating system(s): Microsoft Windows 95
Download file size: 40.55M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
USB I-O Patch
Operating System
Windows 98-Me
Version
1.0
Language Driver
Spanish
Size Driver
778KB
File Name
usbupdate_windows9x.exe
Observations
Note: This patch is only valid for older versions of the software including versions 1.16, 1.18, and 1.31, as detailed below:
CD Version 1.16, P/N C6748-60033, SW Build A10.03.16
CD Version 1.18, P/N C6748-10003, SW Build A10.03.16
CD Version 1.31, P/N C6748-10004, SW Build A10.02.04 (Asia)
This patch cannot be used on CD Version's 3.00 or later.
Installation Instructions:
Download the file, USBUpdate_Windows9x.exe to a local drive. Make note where (in which folder) the file gets copied.
Temporarily disable any antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
In Windows Explorer (or by some equivalent means) go to the folder where USBUpdate_Windows9x.exe was copied; run the program.
Double-click on the USBUpdate_Windows9x.exe patch file to start it.
Follow the instruction dialogs that appear to install the update.
A restart is necessary after the patch is installed.
Operating system(s): Microsoft Windows 98, Microsoft Windows ME
Download file size: 777.59k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
Millennium TWAIN Software Patch
Operating System
Windows Me
Version
N/A
Language Driver
Spanish
Size Driver
56KB
File Name
hpodsr07k.ds
Observations
NOTE:
This patch only applies to customers that are using Windows ME as their operating system.
Symptom:
The Officejet K series "acquire" text scanning feature of the Readiris software will not run.
This software provides you:
A patch file that replaces the Twain scanning file with a newer version.
Operating system(s): Microsoft Windows ME
Download file size: 56.0k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
Driver
Operating System
Windows NT4
Version
1.16
Language Driver
Spanish
Size Driver
40.5MB
File Name
oj742sp.exe
Observations
This driver has been updated to remove the netdirect features. Other features that have been removed to reduce the driver download file size are the bundled software and the product tour.
This driver is designed for use on computers that will be connected to the OfficeJet K series from the computer's Parallel port or USB port. When installing the OfficeJet K series via a parallel port the computers ECP mode must be turned on.
Download and installation Instructions:
The Officejet K series must be turned off and the Parallel or USB cable must be unplugged from the computer before proceeding!
Download the driver software.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, multimedia applications.
Uninstall any previous versions of the Officejet K series software.
To start the software installation locate and click on the downloaded driver file you saved to your computer's hard drive.
Follow the screen directions presented during software installation.
For a successful install you will see a "Select Cable Type" screen with options for how to connect your OfficeJet K series with a parallel or USB cable.
Select a cable choice and follow the instructions for connecting the OfficeJet K series to your computer.
Upon completing the software installation enable the antivirus software.
Operating system(s): Microsoft Windows NT 4.0
Download file size: 40.52M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
Patch
Operating System
Windows NT4-2000
Version
n/a
Language Driver
Spanish
Size Driver
778KB
File Name
hpgk_nettrafficfix.exe
Observations
G and K series Print Server Network Traffic Patch
Description:
Under certain network configurations, HP OfficeJet software may generate large numbers of OpenPrinter calls to the network print server. These OpenPrinter calls, due to their large number, may eventually crash the print server.
Symptom:
The print server crashes periodically and network analysis determines a large number of open OpenPrinter calls going to the print server. At least one HP OfficeJet printer is connected either to the network or locally on a client PC.
What this software patch accomplishes:
Solves the problem by greatly reducing the number of OpenPrinter calls made over the network.
Which files are upgraded by this patch:
Hpoopm07.exe
Hpopfm07.dll
Downloading Instructions:
For Microsoft Internet Explorer users:
Click on "Download"
Choose the option "Save this program to disk."
Click OK.
You will now be prompted for the location on your hard drive where you would like to save the program. Save the program to your hard drive, making sure to note the drive and directory where the patch gets copied.
After downloading, locate the patch file on your hard drive, "HpGK_NetTrafficFix.exe", and run it.
Follow the install instructions that appear on the screen.
When installation completes, RESTART THE PC.
For Netscape users:
Click on "Download"
Choose the option "Save to disk."
Click OK.
You will now be prompted for the location on your hard drive where you would like to save the program. Save the program to your hard drive, making sure to note the drive and directory where the patch gets copied.
After downloading, locate the patch file on your hard drive, "HpGK_NetTrafficFix.exe", and run it.
Follow the install instructions that appear on the screen.
When installation completes, RESTART THE PC
Operating system(s): Microsoft Windows NT 4.0, Microsoft Windows 2000
Download file size: 778.3k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet k60xi All-in-One
Description
Software and Driver
Operating System
Windows XP
Version
3.10 (A.14.05.09)
Language Driver
Spanish
Size Driver
67.2MB
File Name
a140509_esn_xp.exe
Observations
There is one major new functionality of this driver as listed below:
The Parallel Port is now supported in addition to USB. This driver replaces previous versions of the HP OfficeJet K Series drivers as defined below:
For Windows XP customers this driver replaces driver Version 3.00.
Notice: If you intend to use both a HP OfficeJet K Series and HP OfficeJet G Series All-In-One device on the same PC, there is an uncommon scenario where the OfficeJet G Series will not work. All three of the following conditions must be met in order to experience this situation:
Your OfficeJet K Series has Firmware Version 4.04.
Your OfficeJet K Series is installed on the Parallel Port.
You intend to install an OfficeJet G Series device either on this same computer using a second Parallel Port or on the same Parallel Port at a later time.
If you have not met ALL of these conditions, then you will NOT experience this problem and may proceed. If you expect to encounter all these conditions in the future then do not install this driver. If you are unsure, then contact HP support for further direction.
Follow these steps to determine your HP Officejet K Series device's firmware version:
Simultaneously press and hold the [ENTER] and [Cancel] buttons (this will take two hands for most people)
Release both buttons at the same time
Wait for the "Extended Self-Test Report" to print out.
Look at the "Firmware Version" in the lower third of the page, the left hand column, about the sixth item down. Your device has firmware 4.04 if you see the "Firmware Version: OD404R" on the printout.
Operating system(s): Microsoft Windows XP
Download file size: 67.21M
.
Installation Instructions
Download the web package driver file.
Turn off the HP OfficeJet K Series device and disconnect either the USB cable or Parallel port cable.
Temporarily disable antivirus software.
Exit any running applications, games, utilities, and multimedia applications.
Uninstall the previous version of the HP driver software if any is installed. The Windows XP mini-drivers do not need to be removed.
Run the downloaded .exe file. Follow the screen directions presented during the software installation.
When the software portion of the installation is complete, you will see a "Software Copied Successfully" dialog box with a prompt to "follow the instructions on your setup poster to set up your HP OfficeJet K Series hardware". The instructions below are contained in your setup poster.
Select [Finish] on the "Software Copied Successfully" dialog.
If a request to restart your computer dialog appears, select [yes] to reboot the computer.
Turn on your HP OfficeJet K Series device, and if using USB then reconnect the USB cable between it and the computer, or if using the parallel port then reconnect the parallel port cable between it and the computer.
During the Plug & Play phase, a "Found New Hardware Wizard" dialog will appear.
Select [Next], then [Next], then [Finish] buttons to continue. On some computer it may take a few minutes to install the software.
The desktop icon will be created, and the HP system tray icon will appear in the lower-right corner of the taskbar. The HP Fax Setup Wizard or Electronic Registration will appear depending the features of your HP OfficeJet K Series device.
Complete the HP Fax Setup Wizard, if it appears.
Complete the Electronic Registration, if you have not already done it once.
When the "Congratulations!" dialog appears, select [Skip Tour], since it is not included in the web driver package.
Upon completing the software installation, enable your antivirus software.
View the Readme file or the Onscreen User Guide for further information related to the operation of this driver software. If you chose the default installation location then the Readme.html file will be located in the path:
C:\Program Files\Hewlett-Packard\AiO\hp officejet k series\Help
Access to Official Website Hewlett Packard
Welcome to the HelpDrivers, driver for printers.
Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more
You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.
Do not rename the file you're downloading, it may cause installation problems.