Available 26 files for Hewlett Packard HP OfficeJet 590 All-in-One
Select Files
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet 590 All-in-One
Description
Driver
Operating System
Windows 2000
Version
1.0
Language Driver
Dutch
Size Driver
27.5MB
File Name
oj531du.exe
Observations
ECP Mode Must be ON! (Extended Capabilities Port)
If you plan to connect your HP OfficeJet or HP Printer/Scanner/Copier to your PC via the PC's parallel port, your computer's parallel port must be set to ECP mode to operate properly under Windows 2000. ECP mode allows greater I/O (communications) capabilities through your parallel port and is enabled via the computer's BIOS. Restart your PC, and in most cases, you will be prompted to hit F1, F2, or DEL to Enter your computer's BIOS or "Setup" program. (Check your PC's documentation or vendor's web site for more info).
One you have entered SETUP, locate the configuration section for your PARALLEL PORT and modify it to read ECP. If ECP is not a choice, use a variation of ECP, such as ECP & EPP, or ECP DMA1. Save changes and reboot. Windows 2000 should recognize this and list the Item ECP Printer port in the Device Manager of the Control Panel/System applet under "Ports". If your PC does not support ECP, it will likely fall below the minimum system requirements for Windows 2000. It is also recommended that you install Microsoft Service Pack 1 for Windows 2000.
It is highly recommended that you read the installation instructions before downloading this software.
Operating system(s): Microsoft Windows 2000
Download file size: 27.57M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet 590 All-in-One
Description
Printer Driver
Operating System
Windows 3.1
Version
1.0
Language Driver
Dutch
Size Driver
5.1MB
File Name
590du31.exe
Observations
ECP Mode Must be ON! (Extended Capabilities Port)
If you plan to connect your HP OfficeJet or HP Printer/Scanner/Copier to your PC via the PC's parallel port, your computer's parallel port must be set to ECP mode to operate properly under Windows 2000. ECP mode allows greater I/O (communications) capabilities through your parallel port and is enabled via the computer's BIOS. Restart your PC, and in most cases, you will be prompted to hit F1, F2, or DEL to Enter your computer's BIOS or "Setup" program. (Check your PC's documentation or vendor's web site for more info).
Once you have entered SETUP, locate the configuration section for your PARALLEL PORT and modify it to read ECP. If ECP is not a choice, use a variation of ECP, such as ECP & EPP, or ECP DMA1. Save changes and reboot. Windows 2000 should recognize this and list the Item ECP Printer port in the Device Manager of the Control Panel/System applet under "Ports". If your PC does not support ECP, it will likely fall below the minimum system requirements for Windows 2000. It is also recommended that you install Microsoft Service Pack 1 for Windows 2000.
Download the Driver: Download the driver by clicking on it. It will download onto your PC's hard drive. You may be prompted for the location you would like to download the driver to (if so, placing it in the C:/OJ500/OJ500 Series directory is recommended). Otherwise, your internet browser will put it at the location that is set as its default.
Expand the Driver: Go to your hard drive and find the file that you downloaded. Double-click on the file and it will automatically uncompress itself into a directory.
Launch the Driver: Locate the OJ500/OJ500 Series directory, open up disk1 by double-clicking on it, then double-click on the file named setup.exe. This will begin the driver installation process. Follow the installer directions to install the driver.
Delete the Unneeded Files: After the driver has been installed you may delete the driver file that you originally downloaded, as well as the directory called OJ500/OJ500 Series. This will up space on your hard drive. It is also okay to keep the OJ500/OJ500 Series directory, and its contents, if you feel you have sufficient hard drive space available and wish to keep a backup copy of the printer driver.
You Are Ready to Print!
Operating system(s): Microsoft Windows 3.1
Download file size: 10.43M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet 590 All-in-One
Description
Printer Driver
Operating System
Windows 95
Version
1.0
Language Driver
Dutch
Size Driver
5.1MB
File Name
oj590du95.exe
Observations
ECP Mode Must be ON! (Extended Capabilities Port)
If you plan to connect your HP OfficeJet or HP Printer/Scanner/Copier to your PC via the PC's parallel port, your computer's parallel port must be set to ECP mode to operate properly under Windows 2000. ECP mode allows greater I/O (communications) capabilities through your parallel port and is enabled via the computer's BIOS. Restart your PC, and in most cases, you will be prompted to hit F1, F2, or DEL to Enter your computer's BIOS or "Setup" program. (Check your PC's documentation or vendor's web site for more info).
Once you have entered SETUP, locate the configuration section for your PARALLEL PORT and modify it to read ECP. If ECP is not a choice, use a variation of ECP, such as ECP & EPP, or ECP DMA1. Save changes and reboot. Windows 2000 should recognize this and list the Item ECP Printer port in the Device Manager of the Control Panel/System applet under "Ports". If your PC does not support ECP, it will likely fall below the minimum system requirements for Windows 2000. It is also recommended that you install Microsoft Service Pack 1 for Windows 2000.
Click the download link. A Save As dialog box will appear.
Create a new folder on your desktop (OfficeJet500 is recommended).
Save the downloaded file in the folder you created.
Exit all applications.
Find the newly downloaded file in the folder you created and double-click it to launch the OfficeJet 500 installer.
Follow the on-screen instructions.
Operating system(s): Microsoft Windows 95
Download file size: 10.36M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet 590 All-in-One
Description
Printer Driver
Operating System
Windows NT4
Version
1.0
Language Driver
Dutch
Size Driver
15.7MB
File Name
500dunt.exe
Observations
ECP Mode Must be ON! (Extended Capabilities Port)
If you plan to connect your HP OfficeJet or HP Printer/Scanner/Copier to your PC via the PC's parallel port, your computer's parallel port must be set to ECP mode to operate properly under Windows 2000. ECP mode allows greater I/O (communications) capabilities through your parallel port and is enabled via the computer's BIOS. Restart your PC, and in most cases, you will be prompted to hit F1, F2, or DEL to Enter your computer's BIOS or "Setup" program. (Check your PC's documentation or vendor's web site for more info).
Once you have entered SETUP, locate the configuration section for your PARALLEL PORT and modify it to read ECP. If ECP is not a choice, use a variation of ECP, such as ECP & EPP, or ECP DMA1. Save changes and reboot. Windows 2000 should recognize this and list the Item ECP Printer port in the Device Manager of the Control Panel/System applet under "Ports". If your PC does not support ECP, it will likely fall below the minimum system requirements for Windows 2000. It is also recommended that you install Microsoft Service Pack 1 for Windows 2000.
File Download and Installation Instructions:
Click on "Download". A Save As dialog box will appear.
Create a new folder on your desktop (OfficeJet500 is recommended).
Save the downloaded file in the folder you created.
Exit all applications.
Find the newly downloaded file in the folder you created and double-click it to launch the OfficeJet 500 Series installer.
Follow the on-screen instructions.
Operating system(s): Microsoft Windows NT 4.0
Download file size: 15.79M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet 590 All-in-One
Description
Software and Driver
Operating System
Windows XP
Version
1.0
Language Driver
Dutch
Size Driver
26.9MB
File Name
oj500_nld_xp2003.exe
Observations
IMPORTANT: Start with Step A, and complete the steps in order.
STEP A: UNINSTALL prior Officejet software and POWER OFF your Officejet.
Click Start, click All Programs, point to HP Officejet, and then click Uninstall Software.
POWER OFF your Officejet and leave it powered off until the installation program prompts you to power it on.
Restart your computer.
STEP B: Confirm that ECP (Extended Capabilities Port) Mode is enabled.
Your computer's parallel port must be set to ECP mode, which allows greater communications capabilities through the parallel port. Perform the following steps to confirm that ECP mode is enabled:
Click Start and then click My Computer.
Under Tasks, click View System Information to display the System Properties page.
Click the Hardware tab, and then click Device Manager.
Double-click on Ports (COM & LPT). If you see "ECP Printer Port (LPT1)" listed under Ports, ECP mode is enabled and you can proceed to Step C.
STEP C: Install the Officejet Software for Windows XP
During installation, Windows will display screens recommending that you stop installation because the Officejet software has not passed Windows Logo testing. Hewlett-Packard has tested this Officejet product with Windows XP and verified compatibility, click Continue Anyway.
Perform the following steps to install the Officejet software for Windows XP:
Download the Officejet software located below.
Double-click on the downloaded file to unpack the installation files and click Finish to accept the default Installation Folder. If you are reinstalling the Officejet software, you may get an Overwrite Protection warning. If so, click "Yes to All" to proceed with the installation.
When the HP Officejet Essentials screen appears, click Install and follow the prompts that appear on the screen.
When prompted to do so, power on the HP Officejet and make sure it is connected to your computer.
In a few moments, several Found New Hardware Wizard screens will appear. Accept the recommended action on each screen by clicking Next or Finish to continue. If the Found New Hardware Wizard screens do not appear, restart your computer.
When the HP Officejet Fax Setup Wizard appears, provide the requested information.
Click Print Test Page to verify that your installation was successful.
Click View the ReadMe File for important information about what is supported.
Operating system(s): Microsoft Windows XP
Download file size: 26.98M
.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet 590 All-in-One
Description
Driver
Operating System
Windows 2000
Version
1.0
Language Driver
English American
Size Driver
23.2MB
File Name
oj531en.exe
Observations
ECP Mode Must be ON! (Extended Capabilities Port)
If you plan to connect your HP OfficeJet or HP Printer/Scanner/Copier to your PC via the PC's parallel port, your computer's parallel port must be set to ECP mode to operate properly under Windows 2000. ECP mode allows greater I/O (communications) capabilities through your parallel port and is enabled via the computer's BIOS. Restart your PC, and in most cases, you will be prompted to hit F1, F2, or DEL to Enter your computer's BIOS or "Setup" program. (Check your PC's documentation or vendor's web site for more info).
One you have entered SETUP, locate the configuration section for your PARALLEL PORT and modify it to read ECP. If ECP is not a choice, use a variation of ECP, such as ECP & EPP, or ECP DMA1. Save changes and reboot. Windows 2000 should recognize this and list the Item ECP Printer port in the Device Manager of the Control Panel/System applet under "Ports". If your PC does not support ECP, it will likely fall below the minimum system requirements for Windows 2000. It is also recommended that you install Microsoft Service Pack 1 for Windows 2000.
It is highly recommended that you read the installation instructions before downloading this software.
Operating system(s): Microsoft Windows 2000
Download file size: 23.22M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet 590 All-in-One
Description
Printer Only Driver
Operating System
Windows 2000
Version
1.0
Language Driver
English American
Size Driver
30KB
File Name
printm1.exe
Observations
By downloading & using the Print-Only drivers below, you can print under Windows 2000. The front panel functions will allow you to Fax and Copy, which means only Scanning is unavailable until the full release of HP's All-In-One software for Win2K.
ECP Mode Must be ON! (Extended Capabilities Port)
If you plan to connect your HP OfficeJet or HP Printer/Scanner/Copier to your PC via the PC's parallel port, your computer's parallel port must be set to ECP mode to operate properly under Windows 2000. ECP mode allows greater I/O (communications) capabilities through your parallel port and is enabled via the computer's BIOS. Restart your PC, and in most cases, you will be prompted to hit F1, F2, or DEL to Enter your computer's BIOS or "Setup" program. (Check your PC's documentation or vendor's web site for more info).
Once you have entered SETUP, locate the configuration section for your PARALLEL PORT and modify it to read ECP. If ECP is not a choice, use a variation of ECP, such as ECP & EPP, or ECP DMA1. Save changes and reboot. Windows 2000 should recognize this and list the Item ECP Printer port in the Device Manager of the Control Panel/System applet under "Ports". If your PC does not support ECP, it will Likely fall below the minimum system requirements for Windows 2000. It is also Recommended that you install Microsoft Service Pack 1 for Windows 2000. Please Visit Microsoft's web site, www.windowsupdate.comfor more information.
This driver contains the printer and scanning driver for the OfficeJet 500. If you need to install any bundled software or run the Scanning Tutorial or Product Tour, you will need to have the CD that came with your OfficeJet.
Operating system(s): Microsoft Windows 2000
Download file size: 30.14k
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet 590 All-in-One
Description
Printer Driver
Operating System
Windows 3.1
Version
1.0
Language Driver
English American
Size Driver
5.1MB
File Name
590en31.exe
Observations
ECP Mode Must be ON! (Extended Capabilities Port)
If you plan to connect your HP OfficeJet or HP Printer/Scanner/Copier to your PC via the PC's parallel port, your computer's parallel port must be set to ECP mode to operate properly under Windows 2000. ECP mode allows greater I/O (communications) capabilities through your parallel port and is enabled via the computer's BIOS. Restart your PC, and in most cases, you will be prompted to hit F1, F2, or DEL to Enter your computer's BIOS or "Setup" program. (Check your PC's documentation or vendor's web site for more info).
Once you have entered SETUP, locate the configuration section for your PARALLEL PORT and modify it to read ECP. If ECP is not a choice, use a variation of ECP, such as ECP & EPP, or ECP DMA1. Save changes and reboot. Windows 2000 should recognize this and list the Item ECP Printer port in the Device Manager of the Control Panel/System applet under "Ports". If your PC does not support ECP, it will likely fall below the minimum system requirements for Windows 2000. It is also recommended that you install Microsoft Service Pack 1 for Windows 2000.
Download the Driver: Download the driver by clicking on it. It will download onto your PC's hard drive. You may be prompted for the location you would like to download the driver to (if so, placing it in the C:/OJ500/OJ500 Series directory is recommended). Otherwise, your internet browser will put it at the location that is set as its default.
Expand the Driver: Go to your hard drive and find the file that you downloaded. Double-click on the file and it will automatically uncompress itself into a directory.
Launch the Driver: Locate the OJ500/OJ500 Series directory, open up disk1 by double-clicking on it, then double-click on the file named setup.exe. This will begin the driver installation process. Follow the installer directions to install the driver.
Delete the Unneeded Files: After the driver has been installed you may delete the driver file that you originally downloaded, as well as the directory called OJ500/OJ500 Series. This will up space on your hard drive. It is also okay to keep the OJ500/OJ500 Series directory, and its contents, if you feel you have sufficient hard drive space available and wish to keep a backup copy of the printer driver.
You Are Ready to Print!
Operating system(s): Microsoft Windows 3.1
Download file size: 10.33M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet 590 All-in-One
Description
Printer Driver
Operating System
Windows 95
Version
1.0
Language Driver
English American
Size Driver
5.1MB
File Name
oj590en95.exe
Observations
ECP Mode Must be ON! (Extended Capabilities Port)
If you plan to connect your HP OfficeJet or HP Printer/Scanner/Copier to your PC via the PC's parallel port, your computer's parallel port must be set to ECP mode to operate properly under Windows 2000. ECP mode allows greater I/O (communications) capabilities through your parallel port and is enabled via the computer's BIOS. Restart your PC, and in most cases, you will be prompted to hit F1, F2, or DEL to Enter your computer's BIOS or "Setup" program. (Check your PC's documentation or vendor's web site for more info).
Once you have entered SETUP, locate the configuration section for your PARALLEL PORT and modify it to read ECP. If ECP is not a choice, use a variation of ECP, such as ECP & EPP, or ECP DMA1. Save changes and reboot. Windows 2000 should recognize this and list the Item ECP Printer port in the Device Manager of the Control Panel/System applet under "Ports". If your PC does not support ECP, it will likely fall below the minimum system requirements for Windows 2000. It is also recommended that you install Microsoft Service Pack 1 for Windows 2000.
Click the download link. A Save As dialog box will appear.
Create a new folder on your desktop (OfficeJet500 is recommended).
Save the downloaded file in the folder you created.
Exit all applications.
Find the newly downloaded file in the folder you created and double-click it to launch the OfficeJet 500 installer.
Follow the on-screen instructions.
Operating system(s): Microsoft Windows 95
Download file size: 10.37M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet 590 All-in-One
Description
Printer Driver
Operating System
Windows NT4
Version
1.0
Language Driver
English American
Size Driver
19MB
File Name
500ennt.exe
Observations
ECP Mode Must be ON! (Extended Capabilities Port)
If you plan to connect your HP OfficeJet or HP Printer/Scanner/Copier to your PC via the PC's parallel port, your computer's parallel port must be set to ECP mode to operate properly under Windows 2000. ECP mode allows greater I/O (communications) capabilities through your parallel port and is enabled via the computer's BIOS. Restart your PC, and in most cases, you will be prompted to hit F1, F2, or DEL to Enter your computer's BIOS or "Setup" program. (Check your PC's documentation or vendor's web site for more info).
Once you have entered SETUP, locate the configuration section for your PARALLEL PORT and modify it to read ECP. If ECP is not a choice, use a variation of ECP, such as ECP & EPP, or ECP DMA1. Save changes and reboot. Windows 2000 should recognize this and list the Item ECP Printer port in the Device Manager of the Control Panel/System applet under "Ports". If your PC does not support ECP, it will likely fall below the minimum system requirements for Windows 2000. It is also recommended that you install Microsoft Service Pack 1 for Windows 2000.
File Download and Installation Instructions:
Click on "Download". A Save As dialog box will appear.
Create a new folder on your desktop (OfficeJet500 is recommended).
Save the downloaded file in the folder you created.
Exit all applications.
Find the newly downloaded file in the folder you created and double-click it to launch the OfficeJet 500 Series installer.
Follow the on-screen instructions.
Operating system(s): Microsoft Windows NT 4.0
Download file size: 19.02M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet 590 All-in-One
Description
Software and Driver
Operating System
Windows XP
Version
1.0
Language Driver
English American
Size Driver
22.9MB
File Name
oj500_enu_xp1605.exe
Observations
IMPORTANT: Start with Step A, and complete the steps in order.
STEP A: UNINSTALL prior Officejet software and POWER OFF your Officejet.
Click Start, click All Programs, point to HP Officejet, and then click Uninstall Software.
POWER OFF your Officejet and leave it powered off until the installation program prompts you to power it on.
Restart your computer.
STEP B: Confirm that ECP (Extended Capabilities Port) Mode is enabled.
Your computer's parallel port must be set to ECP mode, which allows greater communications capabilities through the parallel port. Perform the following steps to confirm that ECP mode is enabled:
Click Start and then click My Computer.
Under Tasks, click View System Information to display the System Properties page.
Click the Hardware tab, and then click Device Manager.
Double-click on Ports (COM & LPT). If you see "ECP Printer Port (LPT1)" listed under Ports, ECP mode is enabled and you can proceed to Step C.
STEP C: Install the Officejet Software for Windows XP
During installation, Windows will display screens recommending that you stop installation because the Officejet software has not passed Windows Logo testing. Hewlett-Packard has tested this Officejet product with Windows XP and verified compatibility, click Continue Anyway.
Perform the following steps to install the Officejet software for Windows XP:
Download the Officejet software located below.
Double-click on the downloaded file to unpack the installation files and click Finish to accept the default Installation Folder. If you are reinstalling the Officejet software, you may get an Overwrite Protection warning. If so, click "Yes to All" to proceed with the installation.
When the HP Officejet Essentials screen appears, click Install and follow the prompts that appear on the screen.
When prompted to do so, power on the HP Officejet and make sure it is connected to your computer.
In a few moments, several Found New Hardware Wizard screens will appear. Accept the recommended action on each screen by clicking Next or Finish to continue. If the Found New Hardware Wizard screens do not appear, restart your computer.
When the HP Officejet Fax Setup Wizard appears, provide the requested information.
Click Print Test Page to verify that your installation was successful.
Click View the ReadMe File for important information about what is supported.
Operating system(s): Microsoft Windows XP
Download file size: 23.0M
.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet 590 All-in-One
Description
Driver
Operating System
Windows 2000
Version
1.0
Language Driver
French
Size Driver
28MB
File Name
oj531fr.exe
Observations
ECP Mode Must be ON! (Extended Capabilities Port)
If you plan to connect your HP OfficeJet or HP Printer/Scanner/Copier to your PC via the PC's parallel port, your computer's parallel port must be set to ECP mode to operate properly under Windows 2000. ECP mode allows greater I/O (communications) capabilities through your parallel port and is enabled via the computer's BIOS. Restart your PC, and in most cases, you will be prompted to hit F1, F2, or DEL to Enter your computer's BIOS or "Setup" program. (Check your PC's documentation or vendor's web site for more info).
One you have entered SETUP, locate the configuration section for your PARALLEL PORT and modify it to read ECP. If ECP is not a choice, use a variation of ECP, such as ECP & EPP, or ECP DMA1. Save changes and reboot. Windows 2000 should recognize this and list the Item ECP Printer port in the Device Manager of the Control Panel/System applet under "Ports". If your PC does not support ECP, it will likely fall below the minimum system requirements for Windows 2000. It is also recommended that you install Microsoft Service Pack 1 for Windows 2000.
It is highly recommended that you read the installation instructions before downloading this software.
Operating system(s): Microsoft Windows 2000
Download file size: 28.01M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet 590 All-in-One
Description
Printer Driver
Operating System
Windows 3.1
Version
1.0
Language Driver
French
Size Driver
5.2MB
File Name
590fr31.exe
Observations
ECP Mode Must be ON! (Extended Capabilities Port)
If you plan to connect your HP OfficeJet or HP Printer/Scanner/Copier to your PC via the PC's parallel port, your computer's parallel port must be set to ECP mode to operate properly under Windows 2000. ECP mode allows greater I/O (communications) capabilities through your parallel port and is enabled via the computer's BIOS. Restart your PC, and in most cases, you will be prompted to hit F1, F2, or DEL to Enter your computer's BIOS or "Setup" program. (Check your PC's documentation or vendor's web site for more info).
Once you have entered SETUP, locate the configuration section for your PARALLEL PORT and modify it to read ECP. If ECP is not a choice, use a variation of ECP, such as ECP & EPP, or ECP DMA1. Save changes and reboot. Windows 2000 should recognize this and list the Item ECP Printer port in the Device Manager of the Control Panel/System applet under "Ports". If your PC does not support ECP, it will likely fall below the minimum system requirements for Windows 2000. It is also recommended that you install Microsoft Service Pack 1 for Windows 2000.
Download the Driver: Download the driver by clicking on it. It will download onto your PC's hard drive. You may be prompted for the location you would like to download the driver to (if so, placing it in the C:/OJ500/OJ500 Series directory is recommended). Otherwise, your internet browser will put it at the location that is set as its default.
Expand the Driver: Go to your hard drive and find the file that you downloaded. Double-click on the file and it will automatically uncompress itself into a directory.
Launch the Driver: Locate the OJ500/OJ500 Series directory, open up disk1 by double-clicking on it, then double-click on the file named setup.exe. This will begin the driver installation process. Follow the installer directions to install the driver.
Delete the Unneeded Files: After the driver has been installed you may delete the driver file that you originally downloaded, as well as the directory called OJ500/OJ500 Series. This will up space on your hard drive. It is also okay to keep the OJ500/OJ500 Series directory, and its contents, if you feel you have sufficient hard drive space available and wish to keep a backup copy of the printer driver.
You Are Ready to Print!
Operating system(s): Microsoft Windows 3.1
Download file size: 10.49M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet 590 All-in-One
Description
Printer Driver
Operating System
Windows 95
Version
1.0
Language Driver
French
Size Driver
5.1MB
File Name
oj590fr95.exe
Observations
ECP Mode Must be ON! (Extended Capabilities Port)
If you plan to connect your HP OfficeJet or HP Printer/Scanner/Copier to your PC via the PC's parallel port, your computer's parallel port must be set to ECP mode to operate properly under Windows 2000. ECP mode allows greater I/O (communications) capabilities through your parallel port and is enabled via the computer's BIOS. Restart your PC, and in most cases, you will be prompted to hit F1, F2, or DEL to Enter your computer's BIOS or "Setup" program. (Check your PC's documentation or vendor's web site for more info).
Once you have entered SETUP, locate the configuration section for your PARALLEL PORT and modify it to read ECP. If ECP is not a choice, use a variation of ECP, such as ECP & EPP, or ECP DMA1. Save changes and reboot. Windows 2000 should recognize this and list the Item ECP Printer port in the Device Manager of the Control Panel/System applet under "Ports". If your PC does not support ECP, it will likely fall below the minimum system requirements for Windows 2000. It is also recommended that you install Microsoft Service Pack 1 for Windows 2000.
Click the download link. A Save As dialog box will appear.
Create a new folder on your desktop (OfficeJet500 is recommended).
Save the downloaded file in the folder you created.
Exit all applications.
Find the newly downloaded file in the folder you created and double-click it to launch the OfficeJet 500 installer.
Follow the on-screen instructions.
Operating system(s): Microsoft Windows 95
Download file size: 10.37M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet 590 All-in-One
Description
Printer Driver
Operating System
Windows NT4
Version
1.0
Language Driver
French
Size Driver
15.8MB
File Name
500frnt.exe
Observations
ECP Mode Must be ON! (Extended Capabilities Port)
If you plan to connect your HP OfficeJet or HP Printer/Scanner/Copier to your PC via the PC's parallel port, your computer's parallel port must be set to ECP mode to operate properly under Windows 2000. ECP mode allows greater I/O (communications) capabilities through your parallel port and is enabled via the computer's BIOS. Restart your PC, and in most cases, you will be prompted to hit F1, F2, or DEL to Enter your computer's BIOS or "Setup" program. (Check your PC's documentation or vendor's web site for more info).
Once you have entered SETUP, locate the configuration section for your PARALLEL PORT and modify it to read ECP. If ECP is not a choice, use a variation of ECP, such as ECP & EPP, or ECP DMA1. Save changes and reboot. Windows 2000 should recognize this and list the Item ECP Printer port in the Device Manager of the Control Panel/System applet under "Ports". If your PC does not support ECP, it will likely fall below the minimum system requirements for Windows 2000. It is also recommended that you install Microsoft Service Pack 1 for Windows 2000.
File Download and Installation Instructions:
Click on "Download". A Save As dialog box will appear.
Create a new folder on your desktop (OfficeJet500 is recommended).
Save the downloaded file in the folder you created.
Exit all applications.
Find the newly downloaded file in the folder you created and double-click it to launch the OfficeJet 500 Series installer.
Follow the on-screen instructions.
Operating system(s): Microsoft Windows NT 4.0
Download file size: 15.88M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet 590 All-in-One
Description
Software and Driver
Operating System
Windows XP
Version
1.0
Language Driver
French
Size Driver
27.4MB
File Name
oj500_fra_xp2003.exe
Observations
IMPORTANT: Start with Step A, and complete the steps in order.
STEP A: UNINSTALL prior Officejet software and POWER OFF your Officejet.
Click Start, click All Programs, point to HP Officejet, and then click Uninstall Software.
POWER OFF your Officejet and leave it powered off until the installation program prompts you to power it on.
Restart your computer.
STEP B: Confirm that ECP (Extended Capabilities Port) Mode is enabled.
Your computer's parallel port must be set to ECP mode, which allows greater communications capabilities through the parallel port. Perform the following steps to confirm that ECP mode is enabled:
Click Start and then click My Computer.
Under Tasks, click View System Information to display the System Properties page.
Click the Hardware tab, and then click Device Manager.
Double-click on Ports (COM & LPT). If you see "ECP Printer Port (LPT1)" listed under Ports, ECP mode is enabled and you can proceed to Step C.
STEP C: Install the Officejet Software for Windows XP
During installation, Windows will display screens recommending that you stop installation because the Officejet software has not passed Windows Logo testing. Hewlett-Packard has tested this Officejet product with Windows XP and verified compatibility, click Continue Anyway.
Perform the following steps to install the Officejet software for Windows XP:
Download the Officejet software located below.
Double-click on the downloaded file to unpack the installation files and click Finish to accept the default Installation Folder. If you are reinstalling the Officejet software, you may get an Overwrite Protection warning. If so, click "Yes to All" to proceed with the installation.
When the HP Officejet Essentials screen appears, click Install and follow the prompts that appear on the screen.
When prompted to do so, power on the HP Officejet and make sure it is connected to your computer.
In a few moments, several Found New Hardware Wizard screens will appear. Accept the recommended action on each screen by clicking Next or Finish to continue. If the Found New Hardware Wizard screens do not appear, restart your computer.
When the HP Officejet Fax Setup Wizard appears, provide the requested information.
Click Print Test Page to verify that your installation was successful.
Click View the ReadMe File for important information about what is supported.
Operating system(s): Microsoft Windows XP
Download file size: 27.42M
.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet 590 All-in-One
Description
Driver
Operating System
Windows 2000
Version
1.0
Language Driver
German
Size Driver
27.9MB
File Name
oj531ge.exe
Observations
ECP Mode Must be ON! (Extended Capabilities Port)
If you plan to connect your HP OfficeJet or HP Printer/Scanner/Copier to your PC via the PC's parallel port, your computer's parallel port must be set to ECP mode to operate properly under Windows 2000. ECP mode allows greater I/O (communications) capabilities through your parallel port and is enabled via the computer's BIOS. Restart your PC, and in most cases, you will be prompted to hit F1, F2, or DEL to Enter your computer's BIOS or "Setup" program. (Check your PC's documentation or vendor's web site for more info).
One you have entered SETUP, locate the configuration section for your PARALLEL PORT and modify it to read ECP. If ECP is not a choice, use a variation of ECP, such as ECP & EPP, or ECP DMA1. Save changes and reboot. Windows 2000 should recognize this and list the Item ECP Printer port in the Device Manager of the Control Panel/System applet under "Ports". If your PC does not support ECP, it will likely fall below the minimum system requirements for Windows 2000. It is also recommended that you install Microsoft Service Pack 1 for Windows 2000.
It is highly recommended that you read the installation instructions before downloading this software.
Operating system(s): Microsoft Windows 2000
Download file size: 27.91M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet 590 All-in-One
Description
Printer Driver
Operating System
Windows 3.1
Version
1.0
Language Driver
German
Size Driver
5.2MB
File Name
590ge31.exe
Observations
ECP Mode Must be ON! (Extended Capabilities Port)
If you plan to connect your HP OfficeJet or HP Printer/Scanner/Copier to your PC via the PC's parallel port, your computer's parallel port must be set to ECP mode to operate properly under Windows 2000. ECP mode allows greater I/O (communications) capabilities through your parallel port and is enabled via the computer's BIOS. Restart your PC, and in most cases, you will be prompted to hit F1, F2, or DEL to Enter your computer's BIOS or "Setup" program. (Check your PC's documentation or vendor's web site for more info).
Once you have entered SETUP, locate the configuration section for your PARALLEL PORT and modify it to read ECP. If ECP is not a choice, use a variation of ECP, such as ECP & EPP, or ECP DMA1. Save changes and reboot. Windows 2000 should recognize this and list the Item ECP Printer port in the Device Manager of the Control Panel/System applet under "Ports". If your PC does not support ECP, it will likely fall below the minimum system requirements for Windows 2000. It is also recommended that you install Microsoft Service Pack 1 for Windows 2000.
Download the Driver: Download the driver by clicking on it. It will download onto your PC's hard drive. You may be prompted for the location you would like to download the driver to (if so, placing it in the C:/OJ500/OJ500 Series directory is recommended). Otherwise, your internet browser will put it at the location that is set as its default.
Expand the Driver: Go to your hard drive and find the file that you downloaded. Double-click on the file and it will automatically uncompress itself into a directory.
Launch the Driver: Locate the OJ500/OJ500 Series directory, open up disk1 by double-clicking on it, then double-click on the file named setup.exe. This will begin the driver installation process. Follow the installer directions to install the driver.
Delete the Unneeded Files: After the driver has been installed you may delete the driver file that you originally downloaded, as well as the directory called OJ500/OJ500 Series. This will up space on your hard drive. It is also okay to keep the OJ500/OJ500 Series directory, and its contents, if you feel you have sufficient hard drive space available and wish to keep a backup copy of the printer driver.
You Are Ready to Print!
Operating system(s): Microsoft Windows 3.1
Download file size: 10.49M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet 590 All-in-One
Description
Printer Driver
Operating System
Windows 95
Version
1.0
Language Driver
German
Size Driver
5.1MB
File Name
oj590ge95.exe
Observations
ECP Mode Must be ON! (Extended Capabilities Port)
If you plan to connect your HP OfficeJet or HP Printer/Scanner/Copier to your PC via the PC's parallel port, your computer's parallel port must be set to ECP mode to operate properly under Windows 2000. ECP mode allows greater I/O (communications) capabilities through your parallel port and is enabled via the computer's BIOS. Restart your PC, and in most cases, you will be prompted to hit F1, F2, or DEL to Enter your computer's BIOS or "Setup" program. (Check your PC's documentation or vendor's web site for more info).
Once you have entered SETUP, locate the configuration section for your PARALLEL PORT and modify it to read ECP. If ECP is not a choice, use a variation of ECP, such as ECP & EPP, or ECP DMA1. Save changes and reboot. Windows 2000 should recognize this and list the Item ECP Printer port in the Device Manager of the Control Panel/System applet under "Ports". If your PC does not support ECP, it will likely fall below the minimum system requirements for Windows 2000. It is also recommended that you install Microsoft Service Pack 1 for Windows 2000.
Click the download link. A Save As dialog box will appear.
Create a new folder on your desktop (OfficeJet500 is recommended).
Save the downloaded file in the folder you created.
Exit all applications.
Find the newly downloaded file in the folder you created and double-click it to launch the OfficeJet 500 installer.
Follow the on-screen instructions.
Operating system(s): Microsoft Windows 95
Download file size: 10.38M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet 590 All-in-One
Description
Printer Driver
Operating System
Windows NT4
Version
1.0
Language Driver
German
Size Driver
15.7MB
File Name
500gent.exe
Observations
ECP Mode Must be ON! (Extended Capabilities Port)
If you plan to connect your HP OfficeJet or HP Printer/Scanner/Copier to your PC via the PC's parallel port, your computer's parallel port must be set to ECP mode to operate properly under Windows 2000. ECP mode allows greater I/O (communications) capabilities through your parallel port and is enabled via the computer's BIOS. Restart your PC, and in most cases, you will be prompted to hit F1, F2, or DEL to Enter your computer's BIOS or "Setup" program. (Check your PC's documentation or vendor's web site for more info).
Once you have entered SETUP, locate the configuration section for your PARALLEL PORT and modify it to read ECP. If ECP is not a choice, use a variation of ECP, such as ECP & EPP, or ECP DMA1. Save changes and reboot. Windows 2000 should recognize this and list the Item ECP Printer port in the Device Manager of the Control Panel/System applet under "Ports". If your PC does not support ECP, it will likely fall below the minimum system requirements for Windows 2000. It is also recommended that you install Microsoft Service Pack 1 for Windows 2000.
File Download and Installation Instructions:
Click on "Download". A Save As dialog box will appear.
Create a new folder on your desktop (OfficeJet500 is recommended).
Save the downloaded file in the folder you created.
Exit all applications.
Find the newly downloaded file in the folder you created and double-click it to launch the OfficeJet 500 Series installer.
Follow the on-screen instructions.
Operating system(s): Microsoft Windows NT 4.0
Download file size: 15.79M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet 590 All-in-One
Description
Software and Driver
Operating System
Windows XP
Version
1.0
Language Driver
German
Size Driver
27.3MB
File Name
oj500_deu_xp2003.exe
Observations
IMPORTANT: Start with Step A, and complete the steps in order.
STEP A: UNINSTALL prior Officejet software and POWER OFF your Officejet.
Click Start, click All Programs, point to HP Officejet, and then click Uninstall Software.
POWER OFF your Officejet and leave it powered off until the installation program prompts you to power it on.
Restart your computer.
STEP B: Confirm that ECP (Extended Capabilities Port) Mode is enabled.
Your computer's parallel port must be set to ECP mode, which allows greater communications capabilities through the parallel port. Perform the following steps to confirm that ECP mode is enabled:
Click Start and then click My Computer.
Under Tasks, click View System Information to display the System Properties page.
Click the Hardware tab, and then click Device Manager.
Double-click on Ports (COM & LPT). If you see "ECP Printer Port (LPT1)" listed under Ports, ECP mode is enabled and you can proceed to Step C.
STEP C: Install the Officejet Software for Windows XP
During installation, Windows will display screens recommending that you stop installation because the Officejet software has not passed Windows Logo testing. Hewlett-Packard has tested this Officejet product with Windows XP and verified compatibility, click Continue Anyway.
Perform the following steps to install the Officejet software for Windows XP:
Download the Officejet software located below.
Double-click on the downloaded file to unpack the installation files and click Finish to accept the default Installation Folder. If you are reinstalling the Officejet software, you may get an Overwrite Protection warning. If so, click "Yes to All" to proceed with the installation.
When the HP Officejet Essentials screen appears, click Install and follow the prompts that appear on the screen.
When prompted to do so, power on the HP Officejet and make sure it is connected to your computer.
In a few moments, several Found New Hardware Wizard screens will appear. Accept the recommended action on each screen by clicking Next or Finish to continue. If the Found New Hardware Wizard screens do not appear, restart your computer.
When the HP Officejet Fax Setup Wizard appears, provide the requested information.
Click Print Test Page to verify that your installation was successful.
Click View the ReadMe File for important information about what is supported.
Operating system(s): Microsoft Windows XP
Download file size: 27.33M
.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet 590 All-in-One
Description
Driver
Operating System
Windows 2000
Version
1.0
Language Driver
Spanish
Size Driver
27.8MB
File Name
oj531sp.exe
Observations
ECP Mode Must be ON! (Extended Capabilities Port)
If you plan to connect your HP OfficeJet or HP Printer/Scanner/Copier to your PC via the PC's parallel port, your computer's parallel port must be set to ECP mode to operate properly under Windows 2000. ECP mode allows greater I/O (communications) capabilities through your parallel port and is enabled via the computer's BIOS. Restart your PC, and in most cases, you will be prompted to hit F1, F2, or DEL to Enter your computer's BIOS or "Setup" program. (Check your PC's documentation or vendor's web site for more info).
One you have entered SETUP, locate the configuration section for your PARALLEL PORT and modify it to read ECP. If ECP is not a choice, use a variation of ECP, such as ECP & EPP, or ECP DMA1. Save changes and reboot. Windows 2000 should recognize this and list the Item ECP Printer port in the Device Manager of the Control Panel/System applet under "Ports". If your PC does not support ECP, it will likely fall below the minimum system requirements for Windows 2000. It is also recommended that you install Microsoft Service Pack 1 for Windows 2000.
It is highly recommended that you read the installation instructions before downloading this software.
Operating system(s): Microsoft Windows 2000
Download file size: 27.85M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet 590 All-in-One
Description
Printer Driver
Operating System
Windows 3.1
Version
1.0
Language Driver
Spanish
Size Driver
5.1MB
File Name
590sp31.exe
Observations
ECP Mode Must be ON! (Extended Capabilities Port)
If you plan to connect your HP OfficeJet or HP Printer/Scanner/Copier to your PC via the PC's parallel port, your computer's parallel port must be set to ECP mode to operate properly under Windows 2000. ECP mode allows greater I/O (communications) capabilities through your parallel port and is enabled via the computer's BIOS. Restart your PC, and in most cases, you will be prompted to hit F1, F2, or DEL to Enter your computer's BIOS or "Setup" program. (Check your PC's documentation or vendor's web site for more info).
Once you have entered SETUP, locate the configuration section for your PARALLEL PORT and modify it to read ECP. If ECP is not a choice, use a variation of ECP, such as ECP & EPP, or ECP DMA1. Save changes and reboot. Windows 2000 should recognize this and list the Item ECP Printer port in the Device Manager of the Control Panel/System applet under "Ports". If your PC does not support ECP, it will likely fall below the minimum system requirements for Windows 2000. It is also recommended that you install Microsoft Service Pack 1 for Windows 2000.
Download the Driver: Download the driver by clicking on it. It will download onto your PC's hard drive. You may be prompted for the location you would like to download the driver to (if so, placing it in the C:/OJ500/OJ500 Series directory is recommended). Otherwise, your internet browser will put it at the location that is set as its default.
Expand the Driver: Go to your hard drive and find the file that you downloaded. Double-click on the file and it will automatically uncompress itself into a directory.
Launch the Driver: Locate the OJ500/OJ500 Series directory, open up disk1 by double-clicking on it, then double-click on the file named setup.exe. This will begin the driver installation process. Follow the installer directions to install the driver.
Delete the Unneeded Files: After the driver has been installed you may delete the driver file that you originally downloaded, as well as the directory called OJ500/OJ500 Series. This will up space on your hard drive. It is also okay to keep the OJ500/OJ500 Series directory, and its contents, if you feel you have sufficient hard drive space available and wish to keep a backup copy of the printer driver.
You Are Ready to Print!
Operating system(s): Microsoft Windows 3.1
Download file size: 10.3M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet 590 All-in-One
Description
Printer Driver
Operating System
Windows 95
Version
1.0
Language Driver
Spanish
Size Driver
5.1MB
File Name
oj590sp95.exe
Observations
ECP Mode Must be ON! (Extended Capabilities Port)
If you plan to connect your HP OfficeJet or HP Printer/Scanner/Copier to your PC via the PC's parallel port, your computer's parallel port must be set to ECP mode to operate properly under Windows 2000. ECP mode allows greater I/O (communications) capabilities through your parallel port and is enabled via the computer's BIOS. Restart your PC, and in most cases, you will be prompted to hit F1, F2, or DEL to Enter your computer's BIOS or "Setup" program. (Check your PC's documentation or vendor's web site for more info).
Once you have entered SETUP, locate the configuration section for your PARALLEL PORT and modify it to read ECP. If ECP is not a choice, use a variation of ECP, such as ECP & EPP, or ECP DMA1. Save changes and reboot. Windows 2000 should recognize this and list the Item ECP Printer port in the Device Manager of the Control Panel/System applet under "Ports". If your PC does not support ECP, it will likely fall below the minimum system requirements for Windows 2000. It is also recommended that you install Microsoft Service Pack 1 for Windows 2000.
Click the download link. A Save As dialog box will appear.
Create a new folder on your desktop (OfficeJet500 is recommended).
Save the downloaded file in the folder you created.
Exit all applications.
Find the newly downloaded file in the folder you created and double-click it to launch the OfficeJet 500 installer.
Follow the on-screen instructions.
Operating system(s): Microsoft Windows 95
Download file size: 10.34M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet 590 All-in-One
Description
Printer Driver
Operating System
Windows NT4
Version
1.0
Language Driver
Spanish
Size Driver
15.7MB
File Name
500spnt.exe
Observations
ECP Mode Must be ON! (Extended Capabilities Port)
If you plan to connect your HP OfficeJet or HP Printer/Scanner/Copier to your PC via the PC's parallel port, your computer's parallel port must be set to ECP mode to operate properly under Windows 2000. ECP mode allows greater I/O (communications) capabilities through your parallel port and is enabled via the computer's BIOS. Restart your PC, and in most cases, you will be prompted to hit F1, F2, or DEL to Enter your computer's BIOS or "Setup" program. (Check your PC's documentation or vendor's web site for more info).
Once you have entered SETUP, locate the configuration section for your PARALLEL PORT and modify it to read ECP. If ECP is not a choice, use a variation of ECP, such as ECP & EPP, or ECP DMA1. Save changes and reboot. Windows 2000 should recognize this and list the Item ECP Printer port in the Device Manager of the Control Panel/System applet under "Ports". If your PC does not support ECP, it will likely fall below the minimum system requirements for Windows 2000. It is also recommended that you install Microsoft Service Pack 1 for Windows 2000.
File Download and Installation Instructions:
Click on "Download". A Save As dialog box will appear.
Create a new folder on your desktop (OfficeJet500 is recommended).
Save the downloaded file in the folder you created.
Exit all applications.
Find the newly downloaded file in the folder you created and double-click it to launch the OfficeJet 500 Series installer.
Follow the on-screen instructions.
Operating system(s): Microsoft Windows NT 4.0
Download file size: 15.74M
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP OfficeJet 590 All-in-One
Description
Software and Driver
Operating System
Windows XP
Version
1.0
Language Driver
Spanish
Size Driver
27.2MB
File Name
oj500_esn_xp2003.exe
Observations
IMPORTANT: Start with Step A, and complete the steps in order.
STEP A: UNINSTALL prior Officejet software and POWER OFF your Officejet.
Click Start, click All Programs, point to HP Officejet, and then click Uninstall Software.
POWER OFF your Officejet and leave it powered off until the installation program prompts you to power it on.
Restart your computer.
STEP B: Confirm that ECP (Extended Capabilities Port) Mode is enabled.
Your computer's parallel port must be set to ECP mode, which allows greater communications capabilities through the parallel port. Perform the following steps to confirm that ECP mode is enabled:
Click Start and then click My Computer.
Under Tasks, click View System Information to display the System Properties page.
Click the Hardware tab, and then click Device Manager.
Double-click on Ports (COM & LPT). If you see "ECP Printer Port (LPT1)" listed under Ports, ECP mode is enabled and you can proceed to Step C.
STEP C: Install the Officejet Software for Windows XP
During installation, Windows will display screens recommending that you stop installation because the Officejet software has not passed Windows Logo testing. Hewlett-Packard has tested this Officejet product with Windows XP and verified compatibility, click Continue Anyway.
Perform the following steps to install the Officejet software for Windows XP:
Download the Officejet software located below.
Double-click on the downloaded file to unpack the installation files and click Finish to accept the default Installation Folder. If you are reinstalling the Officejet software, you may get an Overwrite Protection warning. If so, click "Yes to All" to proceed with the installation.
When the HP Officejet Essentials screen appears, click Install and follow the prompts that appear on the screen.
When prompted to do so, power on the HP Officejet and make sure it is connected to your computer.
In a few moments, several Found New Hardware Wizard screens will appear. Accept the recommended action on each screen by clicking Next or Finish to continue. If the Found New Hardware Wizard screens do not appear, restart your computer.
When the HP Officejet Fax Setup Wizard appears, provide the requested information.
Click Print Test Page to verify that your installation was successful.
Click View the ReadMe File for important information about what is supported.
Operating system(s): Microsoft Windows XP
Download file size: 27.26M
.
Access to Official Website Hewlett Packard
Welcome to the HelpDrivers, driver for printers.
Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more
You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.
Do not rename the file you're downloading, it may cause installation problems.