Available 283 files for Hewlett Packard HP Mopier 240
Select Files
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Printer Status Alerts and Internet-Enabled Supplies Ordering IESO SureSupply for Direct Connect
Operating System
Windows 95-98-Me-NT4-2000-XP
Version
3.1
Language Driver
Arabic
Size Driver
6.3MB
File Name
lj1079ar.exe
Observations
Important Information
Internet enabled supplies ordering for direct connect to your PC is included in the Printer Status and Alerts software. After reviewing or being alerted to your supplies status, you can order your supplies on-line.
You will need to install the Printer Status and Alerts software once on each computer for all supported HP LaserJet printers to be connected. Not all printers are supported in each software. Please read the
Some printers may experience slower performance due to the different ways that some computers and printers handle bi-directional communication of the parallel (LPT) interface. Some larger, more complex jobs may need more time to process and print due to the increased communication traffic over the parallel interface.
Download Info
Below are easy-to-follow instructions for downloading and installing the Printer Status/Alerts and Internet Enabled Supplies Ordering software.
Before proceeding with the software installation, the printer must first be properly set up, the printer drivers must already be installed, and your computer must be ready to print.
Download the file to a folder on your hard drive.
Close any screen savers, virus protection programs, or any other software programs that are running on your computer.
Go to the folder where you downloaded the software and double click the file to extract the files.
Go to the folder where these files were extracted to, for example c:\lj1079, and double click on the setup.exe file to start the installation process. During the install process you will be asked to select options for "Display status window when." We suggest you select all of the options for Printer Status/Alerts.
You only need to install this software once on each computer for all supported HP printers connected, either on the network or direct.
Open the "Printer Status and Alerts" software. We suggest you review each of the options for status and alerts and select the ones you wish to receive for your printer.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Monochrome printing software and utility
Operating System
Mac OS 8 Mac OS 9
Version
1.31
Language Utilities
Chinese Hong Kong
Size Driver
5.1MB
File Name
ljmonotc.sit
Date
2 Apr 2003
Observations
The HP LaserJet Installer provides HP LaserJet PostScript printing support for the Mac OS 8.6, 9.0, 9.04, 9.1, and 9.2 operating systems.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
HP LaserJet monochrome printing Software and utility
Operating System
Mac OS 8-Mac OS 9
Version
1.31
Language Utilities
Chinese Hong Kong
Size Driver
5.1MB
File Name
ljmonotc.sit
Date
2 Apr 2003
Observations
The HP LaserJet Installer provides HP LaserJet PostScript printing support for the Mac OS 8.6, 9.0, 9.04, 9.1, and 9.2 operating systems.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Monochrome printing software and utility
Operating System
Mac OS 8 Mac OS 9
Version
1.31
Language Utilities
Chinese Simplified
Size Driver
5.2MB
File Name
ljmonosc.sit
Date
2 Apr 2003
Observations
The HP LaserJet Installer provides HP LaserJet PostScript printing support for the Mac OS 8.6, 9.0, 9.04, 9.1, and 9.2 operating systems.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
HP LaserJet monochrome printing Software and utility
Operating System
Mac OS 8-Mac OS 9
Version
1.31
Language Utilities
Chinese Simplified
Size Driver
5.2MB
File Name
ljmonosc.sit
Date
2 Apr 2003
Observations
The HP LaserJet Installer provides HP LaserJet PostScript printing support for the Mac OS 8.6, 9.0, 9.04, 9.1, and 9.2 operating systems.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
AutoCAD 10-11-12-13 HP-GL2 Driver
Operating System
MS-DOS
Version
4.5
Language Driver
Chinese Simplified
Size Driver
773KB
File Name
lj131sc.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Download into a temporary directory.
Run the file name to extract.
See the readme file for detailed installation instructions.
This driver supports the following HP LaserJets:
LJ240 Mopier, LJ320 Mopier
CLJ 8500, CLJ8500 N, CLJ 8500 DN
LJ8100, LJ8100 N, LJ8100 DN
LJ8000, LJ8000 N, LJ8000 DN
LJ5000, LJ5000 N, LJ5000 GN
LJ4050, LJ4050 T, LJ4050 N, LJ4050 TN
LJ4000, LJ4000 T, LJ4000 N, LJ4000 TN
LJ5, LJ5M, LJ5N, LJ5Si, LJ5SiMX, LJ5SiNX, 5Si Mopier
LJ4, LJ4M, LJ4+, LJ4M+, LJ4Si, LJ4SiMX, LJ4V, LJ4MV
LJII, LJIIID, LJIIISi
LJII,LJIID: w/GL/2cartridge
This driver does not support the following HP LaserJets
CLJ, CLJ5, CLJ5M
LJ6P, LJ6MP, LJ6L
LJ5P, LJ5MP
LJ4P, LJ4MP, LJ4L, LJ4ML
LJIIIP
LJIIP, LJIIP+
LJ2000, LJ500+, LJ, LJ+
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 6 and 5e Drivers
Operating System
OS/2
Version
30.728
Language Driver
Chinese Simplified
Size Driver
1.1MB
File Name
lj273sc.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Download into a temporary directory.
Run the file name to extract.
See the readme file for detailed installation instructions.
Supports the following LaserJets
Mopier 240, Mopier 320
LJ8000, LJ8000 N, LJ8000 DN
LJ5000, LJ5000 N, LJ5000 GN
LJ1100, LJ1100A
LJ2100, LJ2100M, LJ2100TN
LJ8100, LJ8100 N, LJ8100 DN
LJ4050, LJ4050 T, LJ4050 N, LJ4050 TN
LJ4000, LJ4000 T, LJ4000 N, LJ4000 TN
CLJ5, CLJ5M, CLJ
CLJ4500, CLJ4500 N, CLJ4500 DN
CLJ8500, CLJ8500 N, CLJ8500 DN
LJ6P, LJ6MP, LJ6L
LJ5, LJ5P, LJ5M, LJ5N, LJ5Si, LJ5SiMX, LJ5SiNX, 5Si Mopier
LJ4, LJ4+, LJ4M, LJ4M+, LJ4P, LJ4MP, LJ4L, LJ4ML, LJ4Si, LJ4SiMX, LJ4V, LJ4MV
LJIII, LJIIIP, LJIIID, LJIIISi
LJII, LJIID, LJIIP, LJIIP+
LJ, LJ+, LJ 500+, LJ2000
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PostScript Driver
Operating System
OS/2
Version
30.589
Language Driver
Chinese Simplified
Size Driver
803KB
File Name
lj275sc.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Download into a temporary directory.
Run the file name to extract.
See the readme file for detailed installation instructions.
Supports the following LaserJets
Mopier 240, Mopier 320
LJ8000, LJ8000 N, LJ8000 DN
LJ8100, LJ8100 N, LJ8100 DN
LJ5000, LJ5000 N, LJ5000 GN
LJ4050, LJ4050 T, LJ4050 N, LJ4050 TN
LJ4000, LJ4000 T, LJ4000 N, LJ4000 TN
LJ2100, LJ2100M, LJ2100TN
CLJ, CLJ5, CLJ5M
CLJ8500, CLJ8500 N, CLJ8500 DN
CLJ4500, CLJ4500 N, CLJ4500 DN
LJ6MP
LJ5M, LJ5MP, LJ5SiMX, 5Si Mopier
LJ4M, LJ4M+, LJ4MP, LJ4ML, LJ4SiMX, LJ4MV
LJIII, LJIIIP, LJIIID, LJIIISi
*LJII, LJIID, LJIIP, LJIIP+
LJ, LJ+, LJ 500+, LJ2000
*With sufficient memory and/or PostScript Cartridge
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 6 Printer Driver
Operating System
Windows 2000-XP
Version
4.3.2.138
Language Driver
Chinese Simplified
Size Driver
1.5MB
File Name
lj1143sc.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\ljm240). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\ljm240).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
AutoCAD 12-13 HP-GL2 Driver
Operating System
Windows 3.1
Version
4.1b
Language Driver
Chinese Simplified
Size Driver
1.2MB
File Name
lj132sc.exe
Observations
Download Info
To download into a temporary, default directory on your PC, download the file from the section below. Note the directory and path where the file is saved to. You will need to access this file on your PC.
To expand (unzip) this file; find the directory where the file was saved to. Double click on the file.
Please note that this file will create and extract into a default directory on your hard drive. You will have the opportunity to change the Drive and Directory.
This driver supports the following HPLaserJets:
LJ240 Mopier, LJ320 Mopier
CLJ 8550, CLJ8550 N, CLJ 8550 DN, CLJ8550 GN, CLJ8550 MFP
CLJ 8500, CLJ8500 N, CLJ 8500 DN
LJ8150, LJ8150 N, LJ8150 DN, LJ8150 HN
LJ8100, LJ8100 N, LJ8100 DN
LJ8000, LJ8000 N, LJ8000 DN
LJ5000, LJ5000 N, LJ5000 GN
LJ4050, LJ4050 T, LJ4050 N, LJ4050 TN
LJ4000, LJ4000 T, LJ4000 N, LJ4000 TN
LJ5, LJ5M, LJ5N, LJ5Si, LJ5SiMX, LJ5SiNX, 5Si Mopier
LJ4, LJ4M, LJ4+, LJ4M+, LJ4Si, LJ4SiMX, LJ4V, LJ4MV
LJII, LJIIID, LJIIISi
LJII,LJIID: w/GL/2cartridge
This driver does not support the following HPLaserJets
CLJ, CLJ5, CLJ5M
LJ6P, LJ6MP, LJ6L
LJ5P, LJ5MP
LJ4P, LJ4MP, LJ4L, LJ4ML
LJIIIP
LJIIP, LJIIP+
LJ2000, LJ500+, LJ, LJ+
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Resource Manager
Operating System
Windows 95-98
Version
1.2.1.2
Language Driver
Chinese Simplified
Size Driver
8.5MB
File Name
lj191sc.exe
Observations
HPMass Storage Resource Manager, Windows 95/98.
The HPResource Manager is a Windows 95/98 application that allows you to download, delete, and manage your printer-based fonts (PCL and Postscript) and PCL5e macros (electronic forms, overlays, letterhead etc.). The Resource Manager supports the most common network protocols (TCP/IP & IPX/SPX), as well as direct parallel port connection for greater connectivity to meet your business needs. It provides ease-of-use through an intuitive user-interface and a full, on-line help facility.
The HPResource Manager is fully compatible with the HPLaserJet 5 (excl. LaserJet 5P/5MP/5L) with C3930A/C3931A Flash SIMM's, 5Si with C2965A Disk Drive, 4000, 5000, and 8000 series printers with C4286A/C4287A Flash DIMM's or C2985A Disk Drive.
Download Info
To download into a temporary, default directory on your PC, download the file from the section below. Note the directory and path where the file is saved to. You will need to access this file on your PC.
To expand (unzip) this file; find the directory where the file was saved to. Double click on the file.
Please note that this file will create and extract into a default directory on your hard drive. You will have the opportunity to change the Drive and Directory.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Printer Status Alerts and Internet-Enabled Supplies Ordering IESO SureSupply for Direct Connect
Operating System
Windows 95-98-Me-NT4-2000-XP
Version
3.1
Language Driver
Chinese Simplified
Size Driver
6.2MB
File Name
lj1079sc.exe
Observations
Important Information
Internet enabled supplies ordering for direct connect to your PC is included in the Printer Status and Alerts software. After reviewing or being alerted to your supplies status, you can order your supplies on-line.
You will need to install the Printer Status and Alerts software once on each computer for all supported HP LaserJet printers to be connected. Not all printers are supported in each software. Please read the
Some printers may experience slower performance due to the different ways that some computers and printers handle bi-directional communication of the parallel (LPT) interface. Some larger, more complex jobs may need more time to process and print due to the increased communication traffic over the parallel interface.
Download Info
Below are easy-to-follow instructions for downloading and installing the Printer Status/Alerts and Internet Enabled Supplies Ordering software.
Before proceeding with the software installation, the printer must first be properly set up, the printer drivers must already be installed, and your computer must be ready to print.
Download the file to a folder on your hard drive.
Close any screen savers, virus protection programs, or any other software programs that are running on your computer.
Go to the folder where you downloaded the software and double click the file to extract the files.
Go to the folder where these files were extracted to, for example c:\lj1079, and double click on the setup.exe file to start the installation process. During the install process you will be asked to select options for "Display status window when." We suggest you select all of the options for Printer Status/Alerts.
You only need to install this software once on each computer for all supported HP printers connected, either on the network or direct.
Open the "Printer Status and Alerts" software. We suggest you review each of the options for status and alerts and select the ones you wish to receive for your printer.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
AutoCAD 13-14 HP-GL2 Driver
Operating System
Windows NT3.5-NT4
Version
4.5
Language Driver
Chinese Simplified
Size Driver
1.2MB
File Name
lj133sc.exe
Observations
HPLaserJet AutoCAD 13/14 HP-GL/2 Driver
Download Info
To download into a temporary, default directory on your PC, download the file from the section below. Note the directory and path where the file is saved to. You will need to access this file on your PC.
To expand (unzip) this file; find the directory where the file was saved to. Double click on the file.
Please note that this file will create and extract into a default directory on your hard drive. You will have the opportunity to change the Drive and Directory.
This driver supports the following HPLaserJets:
LJ240 Mopier, LJ320 Mopier
CLJ 8550, CLJ8550 N, CLJ 8550 DN, CLJ8550 GN, CLJ8550 MFP
CLJ 8500, CLJ8500 N, CLJ 8500 DN
LJ8150, LJ8150 N, LJ8150 DN, LJ8150 HN
LJ8100, LJ8100 N, LJ8100 DN
LJ8000, LJ8000 N, LJ8000 DN
LJ5000, LJ5000 N, LJ5000 GN
LJ4050, LJ4050 T, LJ4050 N, LJ4050 TN
LJ4000, LJ4000 T, LJ4000 N, LJ4000 TN
LJ5, LJ5M, LJ5N, LJ5Si, LJ5SiMX, LJ5SiNX, 5Si Mopier
LJ4, LJ4M, LJ4+, LJ4M+, LJ4Si, LJ4SiMX, LJ4V, LJ4MV
LJIlI, LJIIID, LJIIISi
LJII,LJIID: w/GL/2cartridge
This driver does not support the following HPLaserJets
CLJ, CLJ5, CLJ5M
LJ6P, LJ6MP, LJ6L
LJ5P, LJ5MP
LJ4P, LJ4MP, LJ4L, LJ4ML
LJIIIP
LJIIP, LJIIP+
LJ2000, LJ500+, LJ, LJ+
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Resource Manager
Operating System
Windows NT4
Version
1.2.1.2
Language Driver
Chinese Simplified
Size Driver
8.5MB
File Name
lj192sc.exe
Observations
HPMass Storage Resource Manager, Windows NT 4.0.
The HPResource Manager is a Windows NT 4.0 application that allows you to download, delete, and manage your printer-based fonts (PCL and Postscript) and PCL5e macros (electronic forms, overlays, letterhead etc.). The Resource Manager supports the most common network protocols (TCP/IP & IPX/SPX), as well as direct parallel port connection for greater connectivity to meet your business needs. It provides ease-of-use through an intuitive user-interface and a full, on-line help facility.
The HPResource Manager is fully compatible with the HPLaserJet 5 (excl. LaserJet 5P/5MP/5L) with C3930A/C3931A Flash SIMM's, 5Si with C2965A Disk Drive, 4000, 5000, and 8000 series printers with C4286A/C4287A Flash DIMM's or C2985A Disk Drive.
Download Info
To download into a temporary, default directory on your PC, download the file from the section below. Note the directory and path where the file is saved to. You will need to access this file on your PC.
To expand (unzip) this file; find the directory where the file was saved to. Double click on the file.
Please note that this file will create and extract into a default directory on your hard drive. You will have the opportunity to change the Drive and Directory.
.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 6 Driver
Operating System
Windows NT4-2000
Version
4.3.2.177
Language Driver
Chinese Simplified
Size Driver
1.4MB
File Name
lj359sc.exe
Observations
Mopier 240 PCL6 Driver Update for Windows NT and Windows 2000
UI Fixes
The previous version allowed fields with garbage or fields that were blank to be shown on "QuickSet," "WaterMark," and "PaperType" fields.
Enhancements
Enabled rotation of portrait pages. Previously, the "rotated" option was only active when the page orientation was set to Landscape. The "rotated" option is now available in portrait orientation.
Changed the label of the "Print Colors As" option to "Print All Text As Black" and moved this setting to the Print Quality Details dialog, where it made more sense.
Enhanced the Watermark functionality to allow for choosing among more shades of a selected color.
Defect Fixes
Fixed a defect that caused the spooler to crash when installing the driver under Windows 2000.
Fixed a defect that caused an operating systems crash under Windows 2000 Terminal Services environment when printing Kanji characters.
Added Passthrough functionality to support MS Word Print Field commands and other applications that require this feature.
Released drivers for 13 different languages.
Download Info
Below are easy-to-follow instructions for downloading and installing printer drivers.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then the computer.
Close any screen savers, virus protection programs or other software programs that are running on your computer.
Download the file to your hard drive and then run the Add Printer Wizard.
Running the downloaded file will extract all the driver files into a directory on your hard drive.
You will have an opportunity to change the drive and directory.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Monochrome printing software and utility
Operating System
Mac OS 8 Mac OS 9
Version
1.31
Language Utilities
Chinese Traditional
Size Driver
5.1MB
File Name
ljmonotc.sit
Date
2 Apr 2003
Observations
The HP LaserJet Installer provides HP LaserJet PostScript printing support for the Mac OS 8.6, 9.0, 9.04, 9.1, and 9.2 operating systems.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
HP LaserJet monochrome printing Software and utility
Operating System
Mac OS 8-Mac OS 9
Version
1.31
Language Utilities
Chinese Traditional
Size Driver
5.1MB
File Name
ljmonotc.sit
Date
2 Apr 2003
Observations
The HP LaserJet Installer provides HP LaserJet PostScript printing support for the Mac OS 8.6, 9.0, 9.04, 9.1, and 9.2 operating systems.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Family AutoCAD 10-11-12-13 HP-GL2 Driver
Operating System
MS-DOS
Version
4.5
Language Driver
Chinese Traditional
Size Driver
748KB
File Name
lj131tc.exe
Observations
HPLaserJet AutoCAD 10/11/12/13 HP-GL/2 Driver
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Download into a temporary directory.
Run the file name to extract.
See the readme file for detailed installation instructions.
This driver supports the following HPLaserJets:
LJ240 Mopier, LJ320 Mopier
CLJ 8550, CLJ8550 N, CLJ 8550 DN, CLJ8550 GN, CLJ8550 MFP
CLJ 8500, CLJ8500 N, CLJ 8500 DN
LJ8150, LJ8150 N, LJ8150 DN, LJ8150 HN
LJ8100, LJ8100 N, LJ8100 DN
LJ8000, LJ8000 N, LJ8000 DN
LJ5000, LJ5000 N, LJ5000 GN
LJ4050, LJ4050 T, LJ4050 N, LJ4050 TN
LJ4000, LJ4000 T, LJ4000 N, LJ4000 TN
LJ5 LJ5L, LJ5M, LJ5N, LJ5Si, LJ5SiMX, LJ5SiNX, 5Si Mopier
LJ4, LJ4M, LJ4+, LJ4M+, LJ4Si, LJ4SiMX, LJ4V, LJ4MV
LJII, LJIIID, LJIIISi
LJII,LJIID: w/GL/2cartridge
This driver does not support the following HPLaserJets
CLJ, CLJ5, CLJ5M
LJ6P, LJ6MP, LJ6L
LJ5P, LJ5MP
LJ4P, LJ4MP, LJ4L, LJ4ML
LJIIIP
LJIIP, LJIIP+
LJ2000, LJ500+, LJ, LJ+
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
AutoCAD 10-11-12-13 HP-GL2 Driver
Operating System
MS-DOS
Version
4.5
Language Driver
Chinese Traditional
Size Driver
748KB
File Name
lj131tc.exe
Observations
HPLaserJet AutoCAD 10/11/12/13 HP-GL/2 Driver
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Download into a temporary directory.
Run the file name to extract.
See the readme file for detailed installation instructions.
This driver supports the following HPLaserJets:
LJ240 Mopier, LJ320 Mopier
CLJ 8550, CLJ8550 N, CLJ 8550 DN, CLJ8550 GN, CLJ8550 MFP
CLJ 8500, CLJ8500 N, CLJ 8500 DN
LJ8150, LJ8150 N, LJ8150 DN, LJ8150 HN
LJ8100, LJ8100 N, LJ8100 DN
LJ8000, LJ8000 N, LJ8000 DN
LJ5000, LJ5000 N, LJ5000 GN
LJ4050, LJ4050 T, LJ4050 N, LJ4050 TN
LJ4000, LJ4000 T, LJ4000 N, LJ4000 TN
LJ5 LJ5L, LJ5M, LJ5N, LJ5Si, LJ5SiMX, LJ5SiNX, 5Si Mopier
LJ4, LJ4M, LJ4+, LJ4M+, LJ4Si, LJ4SiMX, LJ4V, LJ4MV
LJII, LJIIID, LJIIISi
LJII,LJIID: w/GL/2cartridge
This driver does not support the following HPLaserJets
CLJ, CLJ5, CLJ5M
LJ6P, LJ6MP, LJ6L
LJ5P, LJ5MP
LJ4P, LJ4MP, LJ4L, LJ4ML
LJIIIP
LJIIP, LJIIP+
LJ2000, LJ500+, LJ, LJ+
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PostScript Driver
Operating System
OS/2
Version
30.589
Language Driver
Chinese Traditional
Size Driver
805KB
File Name
lj275tc.exe
Observations
HP LaserJet PostScript Driver v30.589,OS/2.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 6 and 5e Drivers
Operating System
OS/2
Version
30.728
Language Driver
Chinese Traditional
Size Driver
1.1MB
File Name
lj273tc.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Download into a temporary directory.
Run the file name to extract.
See the readme file for detailed installation instructions.
Supports the following LaserJets
Mopier 240, Mopier 320
LJ8000, LJ8000 N, LJ8000 DN
LJ5000, LJ5000 N, LJ5000 GN
LJ1100, LJ1100A
LJ2100, LJ2100M, LJ2100TN
LJ3200, LJ3200se - English only for now
LJ8100, LJ8100 N, LJ8100 DN
LJ4050, LJ4050 T, LJ4050 N, LJ4050 TN
LJ4000, LJ4000 T, LJ4000 N, LJ4000 TN
CLJ5, CLJ5M, CLJ
CLJ4500, CLJ4500 N, CLJ4500 DN
CLJ8500, CLJ8500 N, CLJ8500 DN
LJ6P, LJ6MP, LJ6L
LJ5, LJ5P, LJ5M, LJ5N, LJ5Si, LJ5SiMX, LJ5SiNX, 5Si Mopier
LJ4, LJ4+, LJ4M, LJ4M+, LJ4P, LJ4MP, LJ4L, LJ4ML, LJ4Si, LJ4SiMX, LJ4V, LJ4MV
LJIII, LJIIIP, LJIIID, LJIIISi
LJII, LJIID, LJIIP, LJIIP+
LJ, LJ+, LJ 500+, LJ2000
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 6 Printer Driver
Operating System
Windows 2000-XP
Version
4.3.2.138
Language Driver
Chinese Traditional
Size Driver
1.5MB
File Name
lj1143tc.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\ljm240). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\ljm240).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
AutoCAD 12-13 HP-GL2 Driver
Operating System
Windows 3.1
Version
4.1b
Language Driver
Chinese Traditional
Size Driver
1.2MB
File Name
lj132tc.exe
Observations
Download Info
To download into a temporary, default directory on your PC, download the file from the section below. Note the directory and path where the file is saved to. You will need to access this file on your PC.
To expand (unzip) this file; find the directory where the file was saved to. Double click on the file.
Please note that this file will create and extract into a default directory on your hard drive. You will have the opportunity to change the Drive and Directory.
This driver supports the following HPLaserJets:
LJ240 Mopier, LJ320 Mopier
CLJ 8550, CLJ8550 N, CLJ 8550 DN, CLJ8550 GN, CLJ8550 MFP
CLJ 8500, CLJ8500 N, CLJ 8500 DN
LJ8150, LJ8150 N, LJ8150 DN, LJ8150 HN
LJ8100, LJ8100 N, LJ8100 DN
LJ8000, LJ8000 N, LJ8000 DN
LJ5000, LJ5000 N, LJ5000 GN
LJ4050, LJ4050 T, LJ4050 N, LJ4050 TN
LJ4000, LJ4000 T, LJ4000 N, LJ4000 TN
LJ5, LJ5M, LJ5N, LJ5Si, LJ5SiMX, LJ5SiNX, 5Si Mopier
LJ4, LJ4M, LJ4+, LJ4M+, LJ4Si, LJ4SiMX, LJ4V, LJ4MV
LJII, LJIIID, LJIIISi
LJII,LJIID: w/GL/2cartridge
This driver does not support the following HPLaserJets
CLJ, CLJ5, CLJ5M
LJ6P, LJ6MP, LJ6L
LJ5P, LJ5MP
LJ4P, LJ4MP, LJ4L, LJ4ML
LJIIIP
LJIIP, LJIIP+
LJ2000, LJ500+, LJ, LJ+
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Resource Manager
Operating System
Windows 95-98
Version
1.2.1.2
Language Driver
Chinese Traditional
Size Driver
8.5MB
File Name
lj191tc.exe
Observations
HPMass Storage Resource Manager, Windows 95/98.
The HPResource Manager is a Windows 95/98 application that allows you to download, delete, and manage your printer-based fonts (PCL and Postscript) and PCL5e macros (electronic forms, overlays, letterhead etc.). The Resource Manager supports the most common network protocols (TCP/IP & IPX/SPX), as well as direct parallel port connection for greater connectivity to meet your business needs. It provides ease-of-use through an intuitive user-interface and a full, on-line help facility.
The HPResource Manager is fully compatible with the HPLaserJet 5 (excl. LaserJet 5P/5MP/5L) with C3930A/C3931A Flash SIMM's, 5Si with C2965A Disk Drive, 4000, 5000, and 8000 series printers with C4286A/C4287A Flash DIMM's or C2985A Disk Drive.
Download Info
To download into a temporary, default directory on your PC, download the file from the section below. Note the directory and path where the file is saved to. You will need to access this file on your PC.
To expand (unzip) this file; find the directory where the file was saved to. Double click on the file.
Please note that this file will create and extract into a default directory on your hard drive. You will have the opportunity to change the Drive and Directory.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Printer Status Alerts and Internet-Enabled Supplies Ordering IESO SureSupply for Direct Connect
Operating System
Windows 95-98-Me-NT4-2000-XP
Version
3.1
Language Driver
Chinese Traditional
Size Driver
6.2MB
File Name
lj1079tc.exe
Observations
Important Information
Internet enabled supplies ordering for direct connect to your PC is included in the Printer Status and Alerts software. After reviewing or being alerted to your supplies status, you can order your supplies on-line.
You will need to install the Printer Status and Alerts software once on each computer for all supported HP LaserJet printers to be connected. Not all printers are supported in each software. Please read the
Some printers may experience slower performance due to the different ways that some computers and printers handle bi-directional communication of the parallel (LPT) interface. Some larger, more complex jobs may need more time to process and print due to the increased communication traffic over the parallel interface.
Download Info
Below are easy-to-follow instructions for downloading and installing the Printer Status/Alerts and Internet Enabled Supplies Ordering software.
Before proceeding with the software installation, the printer must first be properly set up, the printer drivers must already be installed, and your computer must be ready to print.
Download the file to a folder on your hard drive.
Close any screen savers, virus protection programs, or any other software programs that are running on your computer.
Go to the folder where you downloaded the software and double click the file to extract the files.
Go to the folder where these files were extracted to, for example c:\lj1079, and double click on the setup.exe file to start the installation process. During the install process you will be asked to select options for "Display status window when." We suggest you select all of the options for Printer Status/Alerts.
You only need to install this software once on each computer for all supported HP printers connected, either on the network or direct.
Open the "Printer Status and Alerts" software. We suggest you review each of the options for status and alerts and select the ones you wish to receive for your printer.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
AutoCAD 13-14 HP-GL2 Driver
Operating System
Windows NT3.5-NT4
Version
4.5
Language Driver
Chinese Traditional
Size Driver
1.3MB
File Name
lj133tc.exe
Observations
HPLaserJet AutoCAD 13/14 HP-GL/2 Driver
Download Info
To download into a temporary, default directory on your PC, download the file from the section below. Note the directory and path where the file is saved to. You will need to access this file on your PC.
To expand (unzip) this file; find the directory where the file was saved to. Double click on the file.
Please note that this file will create and extract into a default directory on your hard drive. You will have the opportunity to change the Drive and Directory.
This driver supports the following HPLaserJets:
LJ240 Mopier, LJ320 Mopier
CLJ 8550, CLJ8550 N, CLJ 8550 DN, CLJ8550 GN, CLJ8550 MFP
CLJ 8500, CLJ8500 N, CLJ 8500 DN
LJ8150, LJ8150 N, LJ8150 DN, LJ8150 HN
LJ8100, LJ8100 N, LJ8100 DN
LJ8000, LJ8000 N, LJ8000 DN
LJ5000, LJ5000 N, LJ5000 GN
LJ4050, LJ4050 T, LJ4050 N, LJ4050 TN
LJ4000, LJ4000 T, LJ4000 N, LJ4000 TN
LJ5, LJ5M, LJ5N, LJ5Si, LJ5SiMX, LJ5SiNX, 5Si Mopier
LJ4, LJ4M, LJ4+, LJ4M+, LJ4Si, LJ4SiMX, LJ4V, LJ4MV
LJIlI, LJIIID, LJIIISi
LJII,LJIID: w/GL/2cartridge
This driver does not support the following HPLaserJets
CLJ, CLJ5, CLJ5M
LJ6P, LJ6MP, LJ6L
LJ5P, LJ5MP
LJ4P, LJ4MP, LJ4L, LJ4ML
LJIIIP
LJIIP, LJIIP+
LJ2000, LJ500+, LJ, LJ+
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Resource Manager
Operating System
Windows NT4
Version
1.2.1.2
Language Driver
Chinese Traditional
Size Driver
8.4MB
File Name
lj192tc.exe
Observations
HPMass Storage Resource Manager, Windows NT 4.0.
The HPResource Manager is a Windows NT 4.0 application that allows you to download, delete, and manage your printer-based fonts (PCL and Postscript) and PCL5e macros (electronic forms, overlays, letterhead etc.). The Resource Manager supports the most common network protocols (TCP/IP & IPX/SPX), as well as direct parallel port connection for greater connectivity to meet your business needs. It provides ease-of-use through an intuitive user-interface and a full, on-line help facility.
The HPResource Manager is fully compatible with the HPLaserJet 5 (excl. LaserJet 5P/5MP/5L) with C3930A/C3931A Flash SIMM's, 5Si with C2965A Disk Drive, 4000, 5000, and 8000 series printers with C4286A/C4287A Flash DIMM's or C2985A Disk Drive.
Download Info
To download into a temporary, default directory on your PC, download the file from the section below. Note the directory and path where the file is saved to. You will need to access this file on your PC.
To expand (unzip) this file; find the directory where the file was saved to. Double click on the file.
Please note that this file will create and extract into a default directory on your hard drive. You will have the opportunity to change the Drive and Directory.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 6 Driver
Operating System
Windows NT4-2000
Version
4.3.2.177
Language Driver
Chinese Traditional
Size Driver
1.4MB
File Name
lj359tc.exe
Observations
Mopier 240 PCL6 Driver Update for Windows NT and Windows 2000
UI Fixes
The previous version allowed fields with garbage or fields that were blank to be shownon "QuickSet," "WaterMark," and "PaperType" fields.
Enhancements
Enabled rotation of portrait pages. Previously, the "rotated" option was only active when the page orientation was set to Landscape. The "rotated" option is now available in portrait orientation.
Changed the label of the "Print Colors As" option to "Print All Text As Black" and moved this setting to the Print Quality Details dialog, where it made more sense.
Enhanced the Watermark functionality to allow for choosing among more shades of a selected color.
Defect Fixes
Fixed a defect that caused the spooler to crash when installing the driver under Windows 2000.
Fixed a defect that caused an operating systems crash under Windows 2000 Terminal Services environment when printing Kanji characters.
Added Passthrough functionality to support MS Word Print Field commands and other applications that require this feature.
Released drivers for 13 different languages.
Download Info
Below are easy-to-follow instructions for downloading and installing printer drivers.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then the computer.
Close any screen savers, virus protection programs or other software programs that are running on your computer.
Download the file to your hard drive and then run the Add Printer Wizard.
Running the downloaded file will extract all the driver files into a directory on your hard drive.
You will have an opportunity to change the drive and directory.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Monochrome printing software and utility
Operating System
Mac OS 8 Mac OS 9
Version
1.31
Language Utilities
Czech
Size Driver
4.5MB
File Name
ljmonocs.sit
Date
2 Apr 2003
Observations
The HP LaserJet Installer provides HP LaserJet PostScript printing support for the Mac OS 8.6, 9.0, 9.04, 9.1, and 9.2 operating systems.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
HP LaserJet monochrome printing Software and utility
Operating System
Mac OS 8-Mac OS 9
Version
1.31
Language Utilities
Czech
Size Driver
4.5MB
File Name
ljmonocs.sit
Date
2 Apr 2003
Observations
The HP LaserJet Installer provides HP LaserJet PostScript printing support for the Mac OS 8.6, 9.0, 9.04, 9.1, and 9.2 operating systems.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 6 and 5e Drivers
Operating System
OS/2
Version
30.728
Language Driver
Czech
Size Driver
1.1MB
File Name
lj273cz.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Download into a temporary directory.
Run the file name to extract.
See the readme file for detailed installation instructions.
Supports the following LaserJets
Mopier 240, Mopier 320
LJ8000, LJ8000 N, LJ8000 DN
LJ5000, LJ5000 N, LJ5000 GN
LJ1100, LJ1100A
LJ2100, LJ2100M, LJ2100TN
LJ8100, LJ8100 N, LJ8100 DN
LJ4050, LJ4050 T, LJ4050 N, LJ4050 TN
LJ4000, LJ4000 T, LJ4000 N, LJ4000 TN
CLJ5, CLJ5M, CLJ
CLJ4500, CLJ4500 N, CLJ4500 DN
CLJ8500, CLJ8500 N, CLJ8500 DN
LJ6P, LJ6MP, LJ6L
LJ5, LJ5P, LJ5M, LJ5N, LJ5Si, LJ5SiMX, LJ5SiNX, 5Si Mopier
LJ4, LJ4+, LJ4M, LJ4M+, LJ4P, LJ4MP, LJ4L, LJ4ML, LJ4Si, LJ4SiMX, LJ4V, LJ4MV
LJIII, LJIIIP, LJIIID, LJIIISi
LJII, LJIID, LJIIP, LJIIP+
LJ, LJ+, LJ 500+, LJ2000
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 5e Printer Driver
Operating System
Windows 2000-XP
Version
4.3..2.138
Language Driver
Czech
Size Driver
1.5MB
File Name
lj1142cz.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\ljm240). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\ljm240).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 6 Printer Driver
Operating System
Windows 2000-XP
Version
4.3.2.138
Language Driver
Czech
Size Driver
1.5MB
File Name
lj1143cz.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\ljm240). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\ljm240).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Printer Status Alerts and Internet-Enabled Supplies Ordering IESO SureSupply for Direct Connect
Operating System
Windows 95-98-Me-NT4-2000-XP
Version
3.1
Language Driver
Czech
Size Driver
6.2MB
File Name
lj1079cz.exe
Observations
Important Information
Internet enabled supplies ordering for direct connect to your PC is included in the Printer Status and Alerts software. After reviewing or being alerted to your supplies status, you can order your supplies on-line.
You will need to install the Printer Status and Alerts software once on each computer for all supported HP LaserJet printers to be connected. Not all printers are supported in each software. Please read the
Some printers may experience slower performance due to the different ways that some computers and printers handle bi-directional communication of the parallel (LPT) interface. Some larger, more complex jobs may need more time to process and print due to the increased communication traffic over the parallel interface.
Download Info
Below are easy-to-follow instructions for downloading and installing the Printer Status/Alerts and Internet Enabled Supplies Ordering software.
Before proceeding with the software installation, the printer must first be properly set up, the printer drivers must already be installed, and your computer must be ready to print.
Download the file to a folder on your hard drive.
Close any screen savers, virus protection programs, or any other software programs that are running on your computer.
Go to the folder where you downloaded the software and double click the file to extract the files.
Go to the folder where these files were extracted to, for example c:\lj1079, and double click on the setup.exe file to start the installation process. During the install process you will be asked to select options for "Display status window when." We suggest you select all of the options for Printer Status/Alerts.
You only need to install this software once on each computer for all supported HP printers connected, either on the network or direct.
Open the "Printer Status and Alerts" software. We suggest you review each of the options for status and alerts and select the ones you wish to receive for your printer.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 5e Driver
Operating System
Windows NT4
Version
4.3.2.177
Language Driver
Czech
Size Driver
1.4MB
File Name
lj357cz.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\lj357). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\lj357).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 6 Driver
Operating System
Windows NT4
Version
4.3.2.177
Language Driver
Czech
Size Driver
1.4MB
File Name
lj359cz.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\lj359). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\lj359).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PostScript Point and Print Bundle
Operating System
Windows NT4-2000
Version
1.0
Language Driver
Czech
Size Driver
661KB
File Name
hpmopier240_ps_cz.exe
Observations
Download Info
This option allows you to download a single file that contains the entire Product Software.
To download into a temporary, default directory on your PC, download the file. Note the directory and path where the file is saved to. You will need to access this file on your PC.
To expand (unzip) this file; find the directory where the file was saved to. Double click on the file.
Please note that this file will create and extract into a default directory on your hard drive. You will have the opportunity to change the Drive and Directory.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
HP mfp digital sending Software
Operating System
Windows NT4-2000-XP
Version
3.7.5
Language Driver
Czech
Size Driver
50.3MB
File Name
ljmfpdss.exe
Date
20 Jul 2004
Observations
Readme
This upgrade of the hp MFP Digital Sending Software provides digital sending support for the following products:
hp Mopier 240
hp Mopier 320
hp LaserJet 8000 MFP
hp LaserJet 8100 MFP
hp LaserJet 8150 MFP
WARNING: Do not upgrade version 2.x of the Digital Sender Module unless you have an hp MFP Digital Sending Software version 3.0 license (Secure Access or Communications). If you are upgrading a version of the Digital Sender Module version 2.x, the Send-to-Email, Send-to-Fax, and NT Authentication licenses, will be converted to 'legacy licenses' but these features will not be functional until a Digital Sending Software version 3.0 license is entered in the licensing tab.
A Secure Access license provides Send to Email and Authentication
A Communications license provides Send to Email, Authentication, and Send to Fax
hp MFP DSS license packs are available as follows:
hp DSS 3.0 - Secure Access
5 mfp license pack T1929AA (option 0AD)
10 mfp license pack T1929AA (option 0A9)
50 mfp license pack T1929AA (option 0AA)
hp DSS 3.0 - Communications
5 mfp license pack T1930AA (option 0AD)
10 mfp license pack T1930AA (option 0A9)
50 mfp license pack T1930AA (option 0AA)
IMPORTANT NOTE: These license packs are cumulative. For example, if you are upgrading version 2.x of the Digital Sender Module and have installed two email licenses, two send-to-fax licenses, and two NT-authentication licenses, and purchase a five mfp Communications license pack, the six legacy license will be upgraded to Communications licenses and the Digital Sending Software will then be able to support 11 MFPs total.
IMPORTANT NOTE: This software is compatible with all released versions of MFP firmware but there may be significant advantages in upgrading to the latest release versions of firmware.
Revision History
Current Version 3.7.5
Previous Versions3.6.6
3.5.45
3.4.7
3.0.112
Return to Top
Why Would I Need to Perform an Upgrade?
HP periodically releases a new version of the Digital Sending Software to provide defect and product enhancements. An upgrade to the digital sending software may be necessary if you determine that you will benefit from an improvement that is documented in the readmefw.txt file.
Return to Top
Determining the Current Revision Level of the Digital Sending Software
To determine the current revision level:
Go to the Start Menu.
Select Programs
Select Hewlett-Packard
Select hp MFP Digital Sending Software (or with pre 3.x software select hp Digital Sender Module)
Select the Configuration Utility
Select the 'About' tab. The revision level will be displayed on the About tab.
Return to Top
Download and Upgrade Information
Download into a temporary directory of your choice.
Run the file name to extract. Please note that this file extracts into a directory. You will have the opportunity to change the drive and directory.
You are now ready to perform the upgrade process. For a successful upgrade, these file(s) MUST be prepared per the 'Upgrade' instructions in the readmefw.txt file.
Return to Top
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Digital sending software
Operating System
Windows NT4-2000-XP
Version
3.7.5
Language Driver
Czech
Size Driver
50.3MB
File Name
ljmfpdss.exe
Date
20 Jul 2004
Observations
Readme
This upgrade of the HP MFP Digital Sending Software provides digital sending support for the following products:
HP Mopier 240
HP Mopier 320
HP LaserJet 8000 MFP
HP LaserJet 8100 MFP
HP LaserJet 8150 MFP
WARNING: Do not upgrade version 2.x of the Digital Sender Module unless you have an HP MFP Digital Sending Software version 3.0 license (Secure Access or Communications). If you are upgrading a version of the Digital Sender Module version 2.x, the Send-to-Email, Send-to-Fax, and NT Authentication licenses, will be converted to 'legacy licenses' but these features will not be functional until a Digital Sending Software version 3.0 license is entered in the licensing tab.
A Secure Access license provides Send to Email and Authentication
A Communications license provides Send to Email, Authentication, and Send to Fax
HP MFP DSS license packs are available as follows:
HP DSS 3.0 - Secure Access
5 mfp license pack T1929AA (option 0AD)
10 mfp license pack T1929AA (option 0A9)
50 mfp license pack T1929AA (option 0AA)
HP DSS 3.0 - Communications
5 mfp license pack T1930AA (option 0AD)
10 mfp license pack T1930AA (option 0A9)
50 mfp license pack T1930AA (option 0AA)
IMPORTANT NOTE: These license packs are cumulative. For example, if you are upgrading version 2.x of the Digital Sender Module and have installed two email licenses, two send-to-fax licenses, and two NT-authentication licenses, and purchase a five mfp Communications license pack, the six legacy license will be upgraded to Communications licenses and the Digital Sending Software will then be able to support 11 MFPs total.
IMPORTANT NOTE: This software is compatible with all released versions of MFP firmware but there may be significant advantages in upgrading to the latest release versions of firmware.
Revision History
Current Version 3.7.5
Previous Versions3.6.6
3.5.45
3.4.7
3.0.112
Return to Top
Why Would I Need to Perform an Upgrade?
HP periodically releases a new version of the Digital Sending Software to provide defect fixes and product enhancements. An upgrade to the digital sending software may be necessary if you determine that you will benefit from an improvement that is documented in the readmefw.txt file.
Return to Top
Determining the Current Revision Level of the Digital Sending Software
To determine the current revision level:
Go to the Start Menu.
Select Programs
Select Hewlett-Packard
Select HP MFP Digital Sending Software (or with pre 3.x software select HP Digital Sender Module)
Select the Configuration Utility
Select the 'About' tab. The revision level will be displayed on the About tab.
Return to Top
Download and Upgrade Information
Download into a temporary directory of your choice.
Run the file name to extract. Please note that this file extracts into a directory. You will have the opportunity to change the drive and directory.
You are now ready to perform the upgrade process. For a successful upgrade, these file(s) MUST be prepared per the 'Upgrade' instructions in the readmefw.txt file.
Return to Top
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Monochrome printing software and utility
Operating System
Mac OS 8 Mac OS 9
Version
1.5
Language Utilities
Danish
Size Driver
4.4MB
File Name
ljmonoda.sit
Date
14 Nov 2003
Observations
The HP LaserJet Installer provides HP LaserJet PostScript printing support for the Mac OS 8.6, 9.0, 9.04, 9.1, and 9.2 operating systems.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
HP LaserJet monochrome printing Software and utility
Operating System
Mac OS 8-Mac OS 9
Version
1.5
Language Utilities
Danish
Size Driver
4.4MB
File Name
ljmonoda.sit
Date
14 Nov 2003
Observations
The HP LaserJet Installer provides HP LaserJet PostScript printing support for the Mac OS 8.6, 9.0, 9.04, 9.1, and 9.2 operating systems.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PostScript Driver
Operating System
OS/2
Version
30.589
Language Driver
Danish
Size Driver
801KB
File Name
lj275da.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Download into a temporary directory.
Run the file name to extract.
See the readme file for detailed installation instructions.
Supports the following LaserJets
Mopier 240, Mopier 320
LJ8000, LJ8000 N, LJ8000 DN
LJ8100, LJ8100 N, LJ8100 DN
LJ5000, LJ5000 N, LJ5000 GN
LJ4050, LJ4050 T, LJ4050 N, LJ4050 TN
LJ4000, LJ4000 T, LJ4000 N, LJ4000 TN
LJ2100, LJ2100M, LJ2100TN
CLJ, CLJ5, CLJ5M
CLJ8500, CLJ8500 N, CLJ8500 DN
CLJ4500, CLJ4500 N, CLJ4500 DN
LJ6MP
LJ5M, LJ5MP, LJ5SiMX, 5Si Mopier
LJ4M, LJ4M+, LJ4MP, LJ4ML, LJ4SiMX, LJ4MV
LJIII, LJIIIP, LJIIID, LJIIISi
*LJII, LJIID, LJIIP, LJIIP+
LJ, LJ+, LJ 500+, LJ2000
*With sufficient memory and/or PostScript Cartridge
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 6 and 5e Drivers
Operating System
OS/2
Version
30.728
Language Driver
Danish
Size Driver
1.1MB
File Name
lj273da.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Download into a temporary directory.
Run the file name to extract.
See the readme file for detailed installation instructions.
Supports the following LaserJets
Mopier 240, Mopier 320
LJ8000, LJ8000 N, LJ8000 DN
LJ5000, LJ5000 N, LJ5000 GN
LJ1100, LJ1100A
LJ2100, LJ2100M, LJ2100TN
LJ8100, LJ8100 N, LJ8100 DN
LJ4050, LJ4050 T, LJ4050 N, LJ4050 TN
LJ4000, LJ4000 T, LJ4000 N, LJ4000 TN
CLJ5, CLJ5M, CLJ
CLJ4500, CLJ4500 N, CLJ4500 DN
CLJ8500, CLJ8500 N, CLJ8500 DN
LJ6P, LJ6MP, LJ6L
LJ5, LJ5P, LJ5M, LJ5N, LJ5Si, LJ5SiMX, LJ5SiNX, 5Si Mopier
LJ4, LJ4+, LJ4M, LJ4M+, LJ4P, LJ4MP, LJ4L, LJ4ML, LJ4Si, LJ4SiMX, LJ4V, LJ4MV
LJIII, LJIIIP, LJIIID, LJIIISi
LJII, LJIID, LJIIP, LJIIP+
LJ, LJ+, LJ 500+, LJ2000
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 5e Printer Driver
Operating System
Windows 2000-XP
Version
4.3..2.138
Language Driver
Danish
Size Driver
1.5MB
File Name
lj1142da.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\ljm240). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\ljm240).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 6 Printer Driver
Operating System
Windows 2000-XP
Version
4.3.2.138
Language Driver
Danish
Size Driver
1.5MB
File Name
lj1143da.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\ljm240). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\ljm240).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Printer Status Alerts and Internet-Enabled Supplies Ordering IESO SureSupply for Direct Connect
Operating System
Windows 95-98-Me-NT4-2000-XP
Version
3.1
Language Driver
Danish
Size Driver
6.2MB
File Name
lj1079dn.exe
Observations
Important Information
Internet enabled supplies ordering for direct connect to your PC is included in the Printer Status and Alerts software. After reviewing or being alerted to your supplies status, you can order your supplies on-line.
You will need to install the Printer Status and Alerts software once on each computer for all supported HP LaserJet printers to be connected. Not all printers are supported in each software. Please read the
Some printers may experience slower performance due to the different ways that some computers and printers handle bi-directional communication of the parallel (LPT) interface. Some larger, more complex jobs may need more time to process and print due to the increased communication traffic over the parallel interface.
Download Info
Below are easy-to-follow instructions for downloading and installing the Printer Status/Alerts and Internet Enabled Supplies Ordering software.
Before proceeding with the software installation, the printer must first be properly set up, the printer drivers must already be installed, and your computer must be ready to print.
Download the file to a folder on your hard drive.
Close any screen savers, virus protection programs, or any other software programs that are running on your computer.
Go to the folder where you downloaded the software and double click the file to extract the files.
Go to the folder where these files were extracted to, for example c:\lj1079, and double click on the setup.exe file to start the installation process. During the install process you will be asked to select options for "Display status window when." We suggest you select all of the options for Printer Status/Alerts.
You only need to install this software once on each computer for all supported HP printers connected, either on the network or direct.
Open the "Printer Status and Alerts" software. We suggest you review each of the options for status and alerts and select the ones you wish to receive for your printer.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 5e Driver
Operating System
Windows NT3.5
Version
3.44
Language Driver
Danish
Size Driver
197KB
File Name
lj804da.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Download into a temporary directory.
Run the file name to extract.
See the Readme file for installation instructions.
Supports the following HPPrinters
LJ8000, LJ8000 N, LJ8000 DN
LJ8100, LJ8100 N, LJ8100 DN
Mopier 240
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 5e Driver
Operating System
Windows NT4
Version
4.3.2.177
Language Driver
Danish
Size Driver
1.4MB
File Name
lj357da.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\lj357). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\lj357).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 6 Driver
Operating System
Windows NT4
Version
4.3.2.177
Language Driver
Danish
Size Driver
1.4MB
File Name
lj359da.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\lj359). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\lj359).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PostScript Point and Print Bundle
Operating System
Windows NT4-2000
Version
1.0
Language Driver
Danish
Size Driver
654KB
File Name
hpmopier240_ps_da.exe
Observations
Download Info
To download into a temporary, default directory on your PC, download the file from the section below. Note the directory and path where the file is saved to. You will need to access this file on your PC.
To expand (unzip) this file; find the directory where the file was saved to. Double click on the file.
Please note that this file will create and extract into a default directory on your hard drive. You will have the opportunity to change the Drive and Directory.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Digital sending software
Operating System
Windows NT4-2000-XP
Version
3.7.5
Language Driver
Danish
Size Driver
50.3MB
File Name
ljmfpdss.exe
Date
20 Jul 2004
Observations
Readme
This upgrade of the HP MFP Digital Sending Software provides digital sending support for the following products:
HP Mopier 240
HP Mopier 320
HP LaserJet 8000 MFP
HP LaserJet 8100 MFP
HP LaserJet 8150 MFP
WARNING: Do not upgrade version 2.x of the Digital Sender Module unless you have an HP MFP Digital Sending Software version 3.0 license (Secure Access or Communications). If you are upgrading a version of the Digital Sender Module version 2.x, the Send-to-Email, Send-to-Fax, and NT Authentication licenses, will be converted to 'legacy licenses' but these features will not be functional until a Digital Sending Software version 3.0 license is entered in the licensing tab.
A Secure Access license provides Send to Email and Authentication
A Communications license provides Send to Email, Authentication, and Send to Fax
HP MFP DSS license packs are available as follows:
HP DSS 3.0 - Secure Access
5 mfp license pack T1929AA (option 0AD)
10 mfp license pack T1929AA (option 0A9)
50 mfp license pack T1929AA (option 0AA)
HP DSS 3.0 - Communications
5 mfp license pack T1930AA (option 0AD)
10 mfp license pack T1930AA (option 0A9)
50 mfp license pack T1930AA (option 0AA)
IMPORTANT NOTE: These license packs are cumulative. For example, if you are upgrading version 2.x of the Digital Sender Module and have installed two email licenses, two send-to-fax licenses, and two NT-authentication licenses, and purchase a five mfp Communications license pack, the six legacy license will be upgraded to Communications licenses and the Digital Sending Software will then be able to support 11 MFPs total.
IMPORTANT NOTE: This software is compatible with all released versions of MFP firmware but there may be significant advantages in upgrading to the latest release versions of firmware.
Revision History
Current Version 3.7.5
Previous Versions3.6.6
3.5.45
3.4.7
3.0.112
Return to Top
Why Would I Need to Perform an Upgrade?
HP periodically releases a new version of the Digital Sending Software to provide defect fixes and product enhancements. An upgrade to the digital sending software may be necessary if you determine that you will benefit from an improvement that is documented in the readmefw.txt file.
Return to Top
Determining the Current Revision Level of the Digital Sending Software
To determine the current revision level:
Go to the Start Menu.
Select Programs
Select Hewlett-Packard
Select HP MFP Digital Sending Software (or with pre 3.x software select HP Digital Sender Module)
Select the Configuration Utility
Select the 'About' tab. The revision level will be displayed on the About tab.
Return to Top
Download and Upgrade Information
Download into a temporary directory of your choice.
Run the file name to extract. Please note that this file extracts into a directory. You will have the opportunity to change the drive and directory.
You are now ready to perform the upgrade process. For a successful upgrade, these file(s) MUST be prepared per the 'Upgrade' instructions in the readmefw.txt file.
Return to Top
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
HP mfp digital sending Software
Operating System
Windows NT4-2000-XP
Version
3.7.5
Language Driver
Danish
Size Driver
50.3MB
File Name
ljmfpdss.exe
Date
20 Jul 2004
Observations
Readme
This upgrade of the hp MFP Digital Sending Software provides digital sending support for the following products:
hp Mopier 240
hp Mopier 320
hp LaserJet 8000 MFP
hp LaserJet 8100 MFP
hp LaserJet 8150 MFP
WARNING: Do not upgrade version 2.x of the Digital Sender Module unless you have an hp MFP Digital Sending Software version 3.0 license (Secure Access or Communications). If you are upgrading a version of the Digital Sender Module version 2.x, the Send-to-Email, Send-to-Fax, and NT Authentication licenses, will be converted to 'legacy licenses' but these features will not be functional until a Digital Sending Software version 3.0 license is entered in the licensing tab.
A Secure Access license provides Send to Email and Authentication
A Communications license provides Send to Email, Authentication, and Send to Fax
hp MFP DSS license packs are available as follows:
hp DSS 3.0 - Secure Access
5 mfp license pack T1929AA (option 0AD)
10 mfp license pack T1929AA (option 0A9)
50 mfp license pack T1929AA (option 0AA)
hp DSS 3.0 - Communications
5 mfp license pack T1930AA (option 0AD)
10 mfp license pack T1930AA (option 0A9)
50 mfp license pack T1930AA (option 0AA)
IMPORTANT NOTE: These license packs are cumulative. For example, if you are upgrading version 2.x of the Digital Sender Module and have installed two email licenses, two send-to-fax licenses, and two NT-authentication licenses, and purchase a five mfp Communications license pack, the six legacy license will be upgraded to Communications licenses and the Digital Sending Software will then be able to support 11 MFPs total.
IMPORTANT NOTE: This software is compatible with all released versions of MFP firmware but there may be significant advantages in upgrading to the latest release versions of firmware.
Revision History
Current Version 3.7.5
Previous Versions3.6.6
3.5.45
3.4.7
3.0.112
Return to Top
Why Would I Need to Perform an Upgrade?
HP periodically releases a new version of the Digital Sending Software to provide defect and product enhancements. An upgrade to the digital sending software may be necessary if you determine that you will benefit from an improvement that is documented in the readmefw.txt file.
Return to Top
Determining the Current Revision Level of the Digital Sending Software
To determine the current revision level:
Go to the Start Menu.
Select Programs
Select Hewlett-Packard
Select hp MFP Digital Sending Software (or with pre 3.x software select hp Digital Sender Module)
Select the Configuration Utility
Select the 'About' tab. The revision level will be displayed on the About tab.
Return to Top
Download and Upgrade Information
Download into a temporary directory of your choice.
Run the file name to extract. Please note that this file extracts into a directory. You will have the opportunity to change the drive and directory.
You are now ready to perform the upgrade process. For a successful upgrade, these file(s) MUST be prepared per the 'Upgrade' instructions in the readmefw.txt file.
Return to Top
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Monochrome printing software and utility
Operating System
Mac OS 8 Mac OS 9
Version
1.5
Language Utilities
Dutch
Size Driver
4.4MB
File Name
ljmonodu.sit
Date
14 Nov 2003
Observations
The HP LaserJet Installer provides HP LaserJet PostScript printing support for the Mac OS 8.6, 9.0, 9.04, 9.1, and 9.2 operating systems.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
HP LaserJet monochrome printing Software and utility
Operating System
Mac OS 8-Mac OS 9
Version
1.5
Language Utilities
Dutch
Size Driver
4.4MB
File Name
ljmonodu.sit
Date
14 Nov 2003
Observations
The HP LaserJet Installer provides HP LaserJet PostScript printing support for the Mac OS 8.6, 9.0, 9.04, 9.1, and 9.2 operating systems.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 6 and 5e Drivers
Operating System
OS/2
Version
30.728
Language Driver
Dutch
Size Driver
1.1MB
File Name
lj273du.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Download into a temporary directory.
Run the file name to extract.
See the readme file for detailed installation instructions.
Supports the following LaserJets
Mopier 240, Mopier 320
LJ8000, LJ8000 N, LJ8000 DN
LJ5000, LJ5000 N, LJ5000 GN
LJ1100, LJ1100A
LJ2100, LJ2100M, LJ2100TN
LJ8100, LJ8100 N, LJ8100 DN
LJ4050, LJ4050 T, LJ4050 N, LJ4050 TN
LJ4000, LJ4000 T, LJ4000 N, LJ4000 TN
CLJ5, CLJ5M, CLJ
CLJ4500, CLJ4500 N, CLJ4500 DN
CLJ8500, CLJ8500 N, CLJ8500 DN
LJ6P, LJ6MP, LJ6L
LJ5, LJ5P, LJ5M, LJ5N, LJ5Si, LJ5SiMX, LJ5SiNX, 5Si Mopier
LJ4, LJ4+, LJ4M, LJ4M+, LJ4P, LJ4MP, LJ4L, LJ4ML, LJ4Si, LJ4SiMX, LJ4V, LJ4MV
LJIII, LJIIIP, LJIIID, LJIIISi
LJII, LJIID, LJIIP, LJIIP+
LJ, LJ+, LJ 500+, LJ2000
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PostScript Driver
Operating System
OS/2
Version
30.589
Language Driver
Dutch
Size Driver
804KB
File Name
lj275du.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Download into a temporary directory.
Run the file name to extract.
See the readme file for detailed installation instructions.
Supports the following LaserJets
Mopier 240, Mopier 320
LJ8000, LJ8000 N, LJ8000 DN
LJ8100, LJ8100 N, LJ8100 DN
LJ5000, LJ5000 N, LJ5000 GN
LJ4050, LJ4050 T, LJ4050 N, LJ4050 TN
LJ4000, LJ4000 T, LJ4000 N, LJ4000 TN
LJ2100, LJ2100M, LJ2100TN
CLJ, CLJ5, CLJ5M
CLJ8500, CLJ8500 N, CLJ8500 DN
CLJ4500, CLJ4500 N, CLJ4500 DN
LJ6MP
LJ5M, LJ5MP, LJ5SiMX, 5Si Mopier
LJ4M, LJ4M+, LJ4MP, LJ4ML, LJ4SiMX, LJ4MV
LJIII, LJIIIP, LJIIID, LJIIISi
*LJII, LJIID, LJIIP, LJIIP+
LJ, LJ+, LJ 500+, LJ2000
*With sufficient memory and/or PostScript Cartridge
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 6 Printer Driver
Operating System
Windows 2000-XP
Version
4.3.2.138
Language Driver
Dutch
Size Driver
1.5MB
File Name
lj1143du.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\ljm240). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\ljm240).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 5e Printer Driver
Operating System
Windows 2000-XP
Version
4.3..2.138
Language Driver
Dutch
Size Driver
1.5MB
File Name
lj1142du.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\ljm240). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\ljm240).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Resource Manager
Operating System
Windows 95-98
Version
1.2.1.2
Language Driver
Dutch
Size Driver
8.7MB
File Name
lj191du.exe
Observations
HPMass Storage Resource Manager, Windows 95/98.
The HPResource Manager is a Windows 95/98 application that allows you to download, delete, and manage your printer-based fonts (PCL and Postscript) and PCL5e macros (electronic forms, overlays, letterhead etc.). The Resource Manager supports the most common network protocols (TCP/IP & IPX/SPX), as well as direct parallel port connection for greater connectivity to meet your business needs. It provides ease-of-use through an intuitive user-interface and a full, on-line help facility.
The HPResource Manager is fully compatible with the HPLaserJet 5 (excl. LaserJet 5P/5MP/5L) with C3930A/C3931A Flash SIMM's, 5Si with C2965A Disk Drive, 4000, 5000, and 8000 series printers with C4286A/C4287A Flash DIMM's or C2985A Disk Drive.
Download Info
To download into a temporary, default directory on your PC, download the file from the section below. Note the directory and path where the file is saved to. You will need to access this file on your PC.
To expand (unzip) this file; find the directory where the file was saved to. Double click on the file.
Please note that this file will create and extract into a default directory on your hard drive. You will have the opportunity to change the Drive and Directory.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Printer Status Alerts and Internet-Enabled Supplies Ordering IESO SureSupply for Direct Connect
Operating System
Windows 95-98-Me-NT4-2000-XP
Version
3.1
Language Driver
Dutch
Size Driver
6.2MB
File Name
lj1079du.exe
Observations
Important Information
Internet enabled supplies ordering for direct connect to your PC is included in the Printer Status and Alerts software. After reviewing or being alerted to your supplies status, you can order your supplies on-line.
You will need to install the Printer Status and Alerts software once on each computer for all supported HP LaserJet printers to be connected. Not all printers are supported in each software. Please read the
Some printers may experience slower performance due to the different ways that some computers and printers handle bi-directional communication of the parallel (LPT) interface. Some larger, more complex jobs may need more time to process and print due to the increased communication traffic over the parallel interface.
Download Info
Below are easy-to-follow instructions for downloading and installing the Printer Status/Alerts and Internet Enabled Supplies Ordering software.
Before proceeding with the software installation, the printer must first be properly set up, the printer drivers must already be installed, and your computer must be ready to print.
Download the file to a folder on your hard drive.
Close any screen savers, virus protection programs, or any other software programs that are running on your computer.
Go to the folder where you downloaded the software and double click the file to extract the files.
Go to the folder where these files were extracted to, for example c:\lj1079, and double click on the setup.exe file to start the installation process. During the install process you will be asked to select options for "Display status window when." We suggest you select all of the options for Printer Status/Alerts.
You only need to install this software once on each computer for all supported HP printers connected, either on the network or direct.
Open the "Printer Status and Alerts" software. We suggest you review each of the options for status and alerts and select the ones you wish to receive for your printer.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 5e Driver
Operating System
Windows NT3.5
Version
3.44
Language Driver
Dutch
Size Driver
197KB
File Name
lj804du.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Download into a temporary directory.
Run the file name to extract.
See the Readme file for installation instructions.
Supports the following HPPrinters
LJ8000, LJ8000 N, LJ8000 DN
LJ8100, LJ8100 N, LJ8100 DN
Mopier 240
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 5e Driver
Operating System
Windows NT4
Version
4.3.2.177
Language Driver
Dutch
Size Driver
1.4MB
File Name
lj357du.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\lj357). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\lj357).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 6 Driver
Operating System
Windows NT4
Version
4.3.2.177
Language Driver
Dutch
Size Driver
1.4MB
File Name
lj359du.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\lj359). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\lj359).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Resource Manager
Operating System
Windows NT4
Version
1.2.1.2
Language Driver
Dutch
Size Driver
8.7MB
File Name
lj192du.exe
Observations
HPMass Storage Resource Manager, Windows NT 4.0.
The HPResource Manager is a Windows NT 4.0 application that allows you to download, delete, and manage your printer-based fonts (PCL and Postscript) and PCL5e macros (electronic forms, overlays, letterhead etc.). The Resource Manager supports the most common network protocols (TCP/IP & IPX/SPX), as well as direct parallel port connection for greater connectivity to meet your business needs. It provides ease-of-use through an intuitive user-interface and a full, on-line help facility.
The HPResource Manager is fully compatible with the HPLaserJet 5 (excl. LaserJet 5P/5MP/5L) with C3930A/C3931A Flash SIMM's, 5Si with C2965A Disk Drive, 4000, 5000, and 8000 series printers with C4286A/C4287A Flash DIMM's or C2985A Disk Drive.
Download Info
To download into a temporary, default directory on your PC, download the file from the section below. Note the directory and path where the file is saved to. You will need to access this file on your PC.
To expand (unzip) this file; find the directory where the file was saved to. Double click on the file.
Please note that this file will create and extract into a default directory on your hard drive. You will have the opportunity to change the Drive and Directory.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PostScript Point and Print Bundle
Operating System
Windows NT4-2000
Version
1.0
Language Driver
Dutch
Size Driver
654KB
File Name
hpmopier240_ps_du.exe
Observations
Download Info
To download into a temporary, default directory on your PC, download the file from the section below. Note the directory and path where the file is saved to. You will need to access this file on your PC.
To expand (unzip) this file; find the directory where the file was saved to. Double click on the file.
Please note that this file will create and extract into a default directory on your hard drive. You will have the opportunity to change the Drive and Directory.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
HP mfp digital sending Software
Operating System
Windows NT4-2000-XP
Version
3.7.5
Language Driver
Dutch
Size Driver
50.3MB
File Name
ljmfpdss.exe
Date
20 Jul 2004
Observations
Readme
This upgrade of the hp MFP Digital Sending Software provides digital sending support for the following products:
hp Mopier 240
hp Mopier 320
hp LaserJet 8000 MFP
hp LaserJet 8100 MFP
hp LaserJet 8150 MFP
WARNING: Do not upgrade version 2.x of the Digital Sender Module unless you have an hp MFP Digital Sending Software version 3.0 license (Secure Access or Communications). If you are upgrading a version of the Digital Sender Module version 2.x, the Send-to-Email, Send-to-Fax, and NT Authentication licenses, will be converted to 'legacy licenses' but these features will not be functional until a Digital Sending Software version 3.0 license is entered in the licensing tab.
A Secure Access license provides Send to Email and Authentication
A Communications license provides Send to Email, Authentication, and Send to Fax
hp MFP DSS license packs are available as follows:
hp DSS 3.0 - Secure Access
5 mfp license pack T1929AA (option 0AD)
10 mfp license pack T1929AA (option 0A9)
50 mfp license pack T1929AA (option 0AA)
hp DSS 3.0 - Communications
5 mfp license pack T1930AA (option 0AD)
10 mfp license pack T1930AA (option 0A9)
50 mfp license pack T1930AA (option 0AA)
IMPORTANT NOTE: These license packs are cumulative. For example, if you are upgrading version 2.x of the Digital Sender Module and have installed two email licenses, two send-to-fax licenses, and two NT-authentication licenses, and purchase a five mfp Communications license pack, the six legacy license will be upgraded to Communications licenses and the Digital Sending Software will then be able to support 11 MFPs total.
IMPORTANT NOTE: This software is compatible with all released versions of MFP firmware but there may be significant advantages in upgrading to the latest release versions of firmware.
Revision History
Current Version 3.7.5
Previous Versions3.6.6
3.5.45
3.4.7
3.0.112
Return to Top
Why Would I Need to Perform an Upgrade?
HP periodically releases a new version of the Digital Sending Software to provide defect and product enhancements. An upgrade to the digital sending software may be necessary if you determine that you will benefit from an improvement that is documented in the readmefw.txt file.
Return to Top
Determining the Current Revision Level of the Digital Sending Software
To determine the current revision level:
Go to the Start Menu.
Select Programs
Select Hewlett-Packard
Select hp MFP Digital Sending Software (or with pre 3.x software select hp Digital Sender Module)
Select the Configuration Utility
Select the 'About' tab. The revision level will be displayed on the About tab.
Return to Top
Download and Upgrade Information
Download into a temporary directory of your choice.
Run the file name to extract. Please note that this file extracts into a directory. You will have the opportunity to change the drive and directory.
You are now ready to perform the upgrade process. For a successful upgrade, these file(s) MUST be prepared per the 'Upgrade' instructions in the readmefw.txt file.
Return to Top
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Digital sending software
Operating System
Windows NT4-2000-XP
Version
3.7.5
Language Driver
Dutch
Size Driver
50.3MB
File Name
ljmfpdss.exe
Date
20 Jul 2004
Observations
Readme
This upgrade of the HP MFP Digital Sending Software provides digital sending support for the following products:
HP Mopier 240
HP Mopier 320
HP LaserJet 8000 MFP
HP LaserJet 8100 MFP
HP LaserJet 8150 MFP
WARNING: Do not upgrade version 2.x of the Digital Sender Module unless you have an HP MFP Digital Sending Software version 3.0 license (Secure Access or Communications). If you are upgrading a version of the Digital Sender Module version 2.x, the Send-to-Email, Send-to-Fax, and NT Authentication licenses, will be converted to 'legacy licenses' but these features will not be functional until a Digital Sending Software version 3.0 license is entered in the licensing tab.
A Secure Access license provides Send to Email and Authentication
A Communications license provides Send to Email, Authentication, and Send to Fax
HP MFP DSS license packs are available as follows:
HP DSS 3.0 - Secure Access
5 mfp license pack T1929AA (option 0AD)
10 mfp license pack T1929AA (option 0A9)
50 mfp license pack T1929AA (option 0AA)
HP DSS 3.0 - Communications
5 mfp license pack T1930AA (option 0AD)
10 mfp license pack T1930AA (option 0A9)
50 mfp license pack T1930AA (option 0AA)
IMPORTANT NOTE: These license packs are cumulative. For example, if you are upgrading version 2.x of the Digital Sender Module and have installed two email licenses, two send-to-fax licenses, and two NT-authentication licenses, and purchase a five mfp Communications license pack, the six legacy license will be upgraded to Communications licenses and the Digital Sending Software will then be able to support 11 MFPs total.
IMPORTANT NOTE: This software is compatible with all released versions of MFP firmware but there may be significant advantages in upgrading to the latest release versions of firmware.
Revision History
Current Version 3.7.5
Previous Versions3.6.6
3.5.45
3.4.7
3.0.112
Return to Top
Why Would I Need to Perform an Upgrade?
HP periodically releases a new version of the Digital Sending Software to provide defect fixes and product enhancements. An upgrade to the digital sending software may be necessary if you determine that you will benefit from an improvement that is documented in the readmefw.txt file.
Return to Top
Determining the Current Revision Level of the Digital Sending Software
To determine the current revision level:
Go to the Start Menu.
Select Programs
Select Hewlett-Packard
Select HP MFP Digital Sending Software (or with pre 3.x software select HP Digital Sender Module)
Select the Configuration Utility
Select the 'About' tab. The revision level will be displayed on the About tab.
Return to Top
Download and Upgrade Information
Download into a temporary directory of your choice.
Run the file name to extract. Please note that this file extracts into a directory. You will have the opportunity to change the drive and directory.
You are now ready to perform the upgrade process. For a successful upgrade, these file(s) MUST be prepared per the 'Upgrade' instructions in the readmefw.txt file.
Return to Top
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Feature Software and Driver
Operating System
Mac OS 8 Mac OS 9
Version
N/A
Language Driver
English
Size Driver
1.8MB
File Name
lj246en.hqx
Observations
HP MacOS Font Installer for LaserJet printers. This installer will extract the fonts on your computer. You may then install the fonts you choose by dragging them to your system folder.
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Download into a temporary directory.
This file was BinHexed with Stuffit Deluxe.
For detailed instructions go to Tips for Macintosh Software & Drivers.
After extracting the file double click to install all the components and select that printer in the Chooser.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Monochrome Printing Software and Utility
Operating System
Mac OS 8 Mac OS 9
Version
1.5
Language Utilities
English
Size Driver
4.5MB
File Name
ljmonoen.sit
Observations
The HP LaserJet Installer provides HP LaserJet PostScript printing support for the Mac OS 8.6, 9.0, 9.04, 9.1, and 9.2 operating systems.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Mac OS X Universal Binary Generic Print Driver Installer
Operating System
Mac OS X
Version
5.5.2
Language Driver
English
Size Driver
14.7MB
File Name
hplaserjet_v5_5_2.dmg
Observations
This download package contains HP LaserJet Mac OS X Installer with updated PPD and PDE (Univeral Binary) files. Full printing support for Mac OS X v10.2.8, v10.3, v10.4 PPC and Intel processor Macs is included with this download.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Family WordPerfect 5.x and 6.x Drivers
Operating System
MS-DOS
Version
N/A
Language Driver
English
Size Driver
119KB
File Name
lj136en.exe
Observations
Important Notes
This version of Resource Manager supports Windows 95, Windows 98, Windows NT 4.0 and Windows 2000.
If you are using any of the Digital Sender Module Services (Scan to Email, LanFax, or NT Authentication) with the Mopier 240/320 or LaserJet 8000/8100 MFP, you will need to download firmware using the Digital Sender Module 2.3 software. Use of the DOS parallel upgrade or the HP Resource-Manager Upgrade will break the digital sending connection, and digital sending will no longer work.
Each version also includes all features and fixes from previous firmware versions.
If the hard disk is initialized, the factory defaults will be restored and the System Administrator will need to reset the desired default settings.
What's New in Version 6.31: Copy Processor:
When the printer was busy with long job, a copy job scanned from the ADF would time out after 30 seconds. Now, the copy job is held until the printer is available or the user cancels the copy job.
Raw email aliases (e.g. "john" with no Domain "@xxx.com") entered from Scanner. We added the ability to suppress the "Name not Found in Database" message by using the '999#320*' Custom Options on Scanner. This feature can be used when the SMTP server resolves email addresses from an email alias.
When Faxing and Authenticating, if NT Authentication is enabled and Fax Notification is disabled, the service would insert "GUEST" in the UserName field of the fax config file (.hpf). Now, the service inserts the Display Name of the authenticated user in the UserName field instead. (RightFax)
For more detailed version information please view the revision history document.
Download Info
There are two methods for upgrading the firmware for the HP Digital Copy.
For Single MFP Upgrades: A PJL datastream sent to the printer's hard disk using a DOS binary copy command may be preferable. This procedure requires a host computer capable of running DOS, a C-type parallel cable, and the PJL firmware file. Host computers not able to run DOS will work as long as they are capable of sending a binary datastream to a parallel connected device. The firmware will be in a file called CMFxxx.PJL (where xxx is the CP runtime version number). A file called CMFDIRS.PJL will also be available to create, or recreate the necessary directory structure to contain the copy module firmware (see step 8 below).
For Multiple MFP Upgrades: If it is a single site or upgrade over the network, then the HP Resource Manager method may be preferable. This method requires a host PC running Windows 9x or Windows NT with HP Resource Manager installed, the correct .mfw firmware file, and a network connection to the MFPs to be upgraded. The firmware will be in files called CMFxxxRM.MFW (where xxx is the CP runtime version number).
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
WordPerfect 5.x and 6.x Drivers
Operating System
MS-DOS Windows 95-98-NT4-2000
Version
N/A
Language Driver
English
Size Driver
119KB
File Name
lj136en.exe
Observations
Important Notes
This version of Resource Manager supports Windows 95, Windows 98, Windows NT 4.0 and Windows 2000.
If you are using any of the Digital Sender Module Services (Scan to Email, LanFax, or NT Authentication) with the Mopier 240/320 or LaserJet 8000/8100 MFP, you will need to download firmware using the Digital Sender Module 2.3 software. Use of the DOS parallel upgrade or the HP Resource-Manager Upgrade will break the digital sending connection, and digital sending will no longer work.
Each version also includes all features and fixes from previous firmware versions.
If the hard disk is initialized, the factory defaults will be restored and the System Administrator will need to reset the desired default settings.
What's New in Version 6.31: Copy Processor:
When the printer was busy with long job, a copy job scanned from the ADF would time out after 30 seconds. Now, the copy job is held until the printer is available or the user cancels the copy job.
Raw email aliases (e.g. "john" with no Domain "@xxx.com") entered from Scanner. We added the ability to suppress the "Name not Found in Database" message by using the '999#320*' Custom Options on Scanner. This feature can be used when the SMTP server resolves email addresses from an email alias.
When Faxing and Authenticating, if NT Authentication is enabled and Fax Notification is disabled, the service would insert "GUEST" in the UserName field of the fax config file (.HPf). Now, the service inserts the Display Name of the authenticated user in the UserName field instead. (RightFax)
For more detailed version information please view the revision history document.
Download Info
There are two methods for upgrading the firmware for the HP Digital Copy.
For Single MFP Upgrades: A PJL datastream sent to the printer's hard disk using a DOS binary copy command may be preferable. This procedure requires a host computer capable of running DOS, a C-type parallel cable, and the PJL firmware file. Host computers not able to run DOS will work as long as they are capable of sending a binary datastream to a parallel connected device. The firmware will be in a file called CMFxxx.PJL (where xxx is the CP runtime version number). A file called CMFDIRS.PJL will also be available to create, or recreate the necessary directory structure to contain the copy module firmware (see step 8 below).
For Multiple MFP Upgrades: If it is a single site or upgrade over the network, then the HP Resource Manager method may be preferable. This method requires a host PC running Windows 9x or Windows NT with HP Resource Manager installed, the correct .mfw firmware file, and a network connection to the MFPs to be upgraded. The firmware will be in files called CMFxxxRM.MFW (where xxx is the CP runtime version number).
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Screen reader accessibility for status and alerts
Operating System
Windows 95-98-Me-NT4-2000-XP
Version
3.1
Language Driver
English
Size Driver
6.2MB
File Name
lj1080en.exe
Observations
Important Information
Some printers may experience slower performance due to the different ways that some computers and printers handle bi-directional communication of the parallel (LPT) interface. Some larger, more complex jobs may need more time to process and print due to the increased communication traffic over the parallel interface.
Download Info
Below are easy-to-follow instructions for downloading and installing the Screen Reader Accessibility for Status and Alerts software.
Before proceeding with the software installation, the printer must first be properly set up, and the printer drivers must be already installed, and your computer must be ready to print.
Download the file to a folder on your hard drive.
Close any screen savers, virus protection programs, or any other software programs that are running on your computer.
Go to the folder where you downloaded the software and double click the file to extract the files.
Go to the folder where these files were extracted to, for example c:\lj1080, and double click on the setup.exe file to start the installation process. During the install process you will be asked to select options for "Display status window when." We suggest you select all of the options for Screen Reader Accessibility.
You only need to install this software once on each computer for all HP LaserJet printers connected, either on the network or direct.
Open the "Job Status and Alerts" software. We suggest you review each of the options for status and alerts and select the ones you wish to receive for your printer.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PostScript Driver
Operating System
Windows NT3.5
Version
3.51
Language Driver
English
Size Driver
195KB
File Name
lj855en.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Download into a temporary directory.
Run the file name to extract.
See the Readme file for installation instructions.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Digital sending software
Operating System
Windows NT4-2000-XP
Version
3.7.5
Language Driver
English
Size Driver
50.3MB
File Name
ljmfpdss.exe
Observations
Readme
This upgrade of the hp MFP Digital Sending Software provides digital sending support for the following products:
HP Mopier 240
HP Mopier 320
HP LaserJet 8000 MFP
HP LaserJet 8100 MFP
HP LaserJet 8150 MFP
WARNING: Do not upgrade version 2.x of the Digital Sender Module unless you have an HP MFP Digital Sending Software version 3.0 license (Secure Access or Communications). If you are upgrading a version of the Digital Sender Module version 2.x, the Send-to-Email, Send-to-Fax, and NT Authentication licenses, will be converted to 'legacy licenses' but these features will not be functional until a Digital Sending Software version 3.0 license is entered in the licensing tab.
A Secure Access license provides Send to Email and Authentication
A Communications license provides Send to Email, Authentication, and Send to Fax
HP MFP DSS license packs are available as follows:
HP DSS 3.0 - Secure Access
5 mfp license pack T1929AA (option 0AD)
10 mfp license pack T1929AA (option 0A9)
50 mfp license pack T1929AA (option 0AA)
HP DSS 3.0 - Communications
5 mfp license pack T1930AA (option 0AD)
10 mfp license pack T1930AA (option 0A9)
50 mfp license pack T1930AA (option 0AA)
IMPORTANT NOTE: These license packs are cumulative. For example, if you are upgrading version 2.x of the Digital Sender Module and have installed two email licenses, two send-to-fax licenses, and two NT-authentication licenses, and purchase a five mfp Communications license pack, the six legacy license will be upgraded to Communications licenses and the Digital Sending Software will then be able to support 11 MFPs total.
IMPORTANT NOTE: This software is compatible with all released versions of MFP firmware but there may be significant advantages in upgrading to the latest release versions of firmware.
Revision History
Current Version 3.7.5
Previous Versions3.6.6
3.5.45
3.4.7
3.0.112
Return to Top
Why Would I Need to Perform an Upgrade?
HP periodically releases a new version of the Digital Sending Software to provide defect fixes and product enhancements. An upgrade to the digital sending software may be necessary if you determine that you will benefit from an improvement that is documented in the readmefw.txt file.
Return to Top
Determining the Current Revision Level of the Digital Sending Software
To determine the current revision level:
Go to the Start Menu.
Select Programs
Select Hewlett-Packard
Select HP MFP Digital Sending Software (or with pre 3.x software select HP Digital Sender Module)
Select the Configuration Utility
Select the 'About' tab. The revision level will be displayed on the About tab.
Return to Top
Download and Upgrade Information
Download into a temporary directory of your choice.
Run the file name to extract. Please note that this file extracts into a directory. You will have the opportunity to change the drive and directory.
You are now ready to perform the upgrade process. For a successful upgrade, these file(s) MUST be prepared per the 'Upgrade' instructions in the readmefw.txt file.
Return to Top
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Font Installer
Operating System
Mac OS 8 Mac OS 9
Version
N/A
Language Driver
English American
Size Driver
1.8MB
File Name
lj246en.hqx
Date
3 Jun 1998
Observations
HP MacOS Font Installer for LaserJet printers. This installer will extract the fonts on your computer. You may then install the fonts you choose by dragging them to your system folder.
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Download into a temporary directory.
This file was BinHexed with Stuffit Deluxe.
For detailed instructions go to Tips for Macintosh Software & Drivers.
After extracting the file double click to install all the components and select that printer in the Chooser.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Monochrome printing software and utility
Operating System
Mac OS 8 Mac OS 9
Version
1.5
Language Utilities
English American
Size Driver
4.5MB
File Name
ljmonoen.sit
Date
14 Nov 2003
Observations
The HP LaserJet Installer provides HP LaserJet PostScript printing support for the Mac OS 8.6, 9.0, 9.04, 9.1, and 9.2 operating systems.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
HP Font Installer
Operating System
Mac OS 8-Mac OS 9
Version
N/A
Language Driver
English American
Size Driver
1.8MB
File Name
lj246en.hqx
Date
3 Jun 1998
Observations
HP MacOS Font Installer for LaserJet printers. This installer will extract the fonts on your computer. You may then install the fonts you choose by dragging them to your system folder.
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Download into a temporary directory.
This file was BinHexed with Stuffit Deluxe.
For detailed instructions go to Tips for Macintosh Software & Drivers.
After extracting the file double click to install all the components and select that printer in the Chooser.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
HP LaserJet monochrome printing Software and utility
Operating System
Mac OS 8-Mac OS 9
Version
1.5
Language Utilities
English American
Size Driver
4.5MB
File Name
ljmonoen.sit
Date
14 Nov 2003
Observations
The HP LaserJet Installer provides HP LaserJet PostScript printing support for the Mac OS 8.6, 9.0, 9.04, 9.1, and 9.2 operating systems.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
AutoCAD 10-11-12-13 HP-GL2 Driver
Operating System
MS-DOS
Version
4.5
Language Driver
English American
Size Driver
792KB
File Name
lj131en.exe
Observations
HP LaserJet AutoCAD 10/11/12/13 HP-GL/2 Driver
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Download into a temporary directory.
Run the file name to extract.
See the readme file for detailed installation instructions.
This driver supports the following HP LaserJets:
LJ240 Mopier, LJ320 Mopier
CLJ 8550, CLJ8550 N, CLJ 8550 DN, CLJ8550 GN, CLJ8550 MFP
CLJ 8500, CLJ8500 N, CLJ 8500 DN
LJ8150, LJ8150 N, LJ8150 DN, LJ8150 HN
LJ8100, LJ8100 N, LJ8100 DN
LJ8000, LJ8000 N, LJ8000 DN
LJ5000, LJ5000 N, LJ5000 GN
LJ4050, LJ4050 T, LJ4050 N, LJ4050 TN
LJ4000, LJ4000 T, LJ4000 N, LJ4000 TN
LJ5 LJ5L, LJ5M, LJ5N, LJ5Si, LJ5SiMX, LJ5SiNX, 5Si Mopier
LJ4, LJ4M, LJ4+, LJ4M+, LJ4Si, LJ4SiMX, LJ4V, LJ4MV
LJII, LJIIID, LJIIISi
LJII,LJIID: w/GL/2cartridge
This driver does not support the following HP LaserJets
CLJ, CLJ5, CLJ5M
LJ6P, LJ6MP, LJ6L
LJ5P, LJ5MP
LJ4P, LJ4MP, LJ4L, LJ4ML
LJIIIP
LJIIP, LJIIP+
LJ2000, LJ500+, LJ, LJ+
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Family AutoCAD 10-11-12-13 HP-GL2 Driver
Operating System
MS-DOS
Version
4.5
Language Driver
English American
Size Driver
792KB
File Name
lj131en.exe
Observations
HP LaserJet AutoCAD 10/11/12/13 HP-GL/2 Driver
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Download into a temporary directory.
Run the file name to extract.
See the readme file for detailed installation instructions.
This driver supports the following HP LaserJets:
LJ240 Mopier, LJ320 Mopier
CLJ 8550, CLJ8550 N, CLJ 8550 DN, CLJ8550 GN, CLJ8550 MFP
CLJ 8500, CLJ8500 N, CLJ 8500 DN
LJ8150, LJ8150 N, LJ8150 DN, LJ8150 HN
LJ8100, LJ8100 N, LJ8100 DN
LJ8000, LJ8000 N, LJ8000 DN
LJ5000, LJ5000 N, LJ5000 GN
LJ4050, LJ4050 T, LJ4050 N, LJ4050 TN
LJ4000, LJ4000 T, LJ4000 N, LJ4000 TN
LJ5 LJ5L, LJ5M, LJ5N, LJ5Si, LJ5SiMX, LJ5SiNX, 5Si Mopier
LJ4, LJ4M, LJ4+, LJ4M+, LJ4Si, LJ4SiMX, LJ4V, LJ4MV
LJII, LJIIID, LJIIISi
LJII,LJIID: w/GL/2cartridge
This driver does not support the following HP LaserJets
CLJ, CLJ5, CLJ5M
LJ6P, LJ6MP, LJ6L
LJ5P, LJ5MP
LJ4P, LJ4MP, LJ4L, LJ4ML
LJIIIP
LJIIP, LJIIP+
LJ2000, LJ500+, LJ, LJ+
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 6 and 5e Drivers
Operating System
OS/2
Version
30.728
Language Driver
English American
Size Driver
1008KB
File Name
lj273en.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Download into a temporary directory.
Run the file name to extract.
See the readme file for detailed installation instructions.
Supports the following LaserJets
Mopier 240, Mopier 320
LJ8000, LJ8000 N, LJ8000 DN
LJ5000, LJ5000 N, LJ5000 GN
LJ1100, LJ1100A
LJ2100, LJ2100M, LJ2100TN
LJ3200, LJ3200se - English only for now
LJ8100, LJ8100 N, LJ8100 DN
LJ4050, LJ4050 T, LJ4050 N, LJ4050 TN
LJ4000, LJ4000 T, LJ4000 N, LJ4000 TN
CLJ5, CLJ5M, CLJ
CLJ4500, CLJ4500 N, CLJ4500 DN
CLJ8500, CLJ8500 N, CLJ8500 DN
LJ6P, LJ6MP, LJ6L
LJ5, LJ5P, LJ5M, LJ5N, LJ5Si, LJ5SiMX, LJ5SiNX, 5Si Mopier
LJ4, LJ4+, LJ4M, LJ4M+, LJ4P, LJ4MP, LJ4L, LJ4ML, LJ4Si, LJ4SiMX, LJ4V, LJ4MV
LJIII, LJIIIP, LJIIID, LJIIISi
LJII, LJIID, LJIIP, LJIIP+
LJ, LJ+, LJ 500+, LJ2000
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PostScript Driver
Operating System
OS/2
Version
30.589
Language Driver
English American
Size Driver
805KB
File Name
lj275en.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Download into a temporary directory.
Run the file name to extract.
See the readme file for detailed installation instructions.
Supports the following LaserJets
Mopier 240, Mopier 320
LJ8000, LJ8000 N, LJ8000 DN
LJ8100, LJ8100 N, LJ8100 DN
LJ5000, LJ5000 N, LJ5000 GN
LJ4050, LJ4050 T, LJ4050 N, LJ4050 TN
LJ4000, LJ4000 T, LJ4000 N, LJ4000 TN
LJ2100, LJ2100M, LJ2100TN
CLJ, CLJ5, CLJ5M
CLJ8500, CLJ8500 N, CLJ8500 DN
CLJ4500, CLJ4500 N, CLJ4500 DN
LJ6MP
LJ5M, LJ5MP, LJ5SiMX, 5Si Mopier
LJ4M, LJ4M+, LJ4MP, LJ4ML, LJ4SiMX, LJ4MV
LJIII, LJIIIP, LJIIID, LJIIISi
*LJII, LJIID, LJIIP, LJIIP+
LJ, LJ+, LJ 500+, LJ2000
*With sufficient memory and/or PostScript Cartridge
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 5e Printer Driver
Operating System
Windows 2000-XP
Version
4.3..2.138
Language Driver
English American
Size Driver
1.5MB
File Name
lj1142en.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\ljm240). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\ljm240).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 6 Printer Driver
Operating System
Windows 2000-XP
Version
4.3.2.138
Language Driver
English American
Size Driver
1.5MB
File Name
lj1143en.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\ljm240). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\ljm240).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
AutoCAD 12-13 HP-GL2 Driver
Operating System
Windows 3.1
Version
4.1b
Language Driver
English American
Size Driver
1.2MB
File Name
lj132en.exe
Observations
Download Info
To download into a temporary, default directory on your PC, download the file from the section below. Note the directory and path where the file is saved to. You will need to access this file on your PC.
To expand (unzip) this file; find the directory where the file was saved to. Double click on the file.
Please note that this file will create and extract into a default directory on your hard drive. You will have the opportunity to change the Drive and Directory.
This driver supports the following HPLaserJets:
LJ240 Mopier, LJ320 Mopier
CLJ 8550, CLJ8550 N, CLJ 8550 DN, CLJ8550 GN, CLJ8550 MFP
CLJ 8500, CLJ8500 N, CLJ 8500 DN
LJ8150, LJ8150 N, LJ8150 DN, LJ8150 HN
LJ8100, LJ8100 N, LJ8100 DN
LJ8000, LJ8000 N, LJ8000 DN
LJ5000, LJ5000 N, LJ5000 GN
LJ4050, LJ4050 T, LJ4050 N, LJ4050 TN
LJ4000, LJ4000 T, LJ4000 N, LJ4000 TN
LJ5, LJ5M, LJ5N, LJ5Si, LJ5SiMX, LJ5SiNX, 5Si Mopier
LJ4, LJ4M, LJ4+, LJ4M+, LJ4Si, LJ4SiMX, LJ4V, LJ4MV
LJII, LJIIID, LJIIISi
LJII,LJIID: w/GL/2cartridge
This driver does not support the following HPLaserJets
CLJ, CLJ5, CLJ5M
LJ6P, LJ6MP, LJ6L
LJ5P, LJ5MP
LJ4P, LJ4MP, LJ4L, LJ4ML
LJIIIP
LJIIP, LJIIP+
LJ2000, LJ500+, LJ, LJ+
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Resource Manager
Operating System
Windows 95-98
Version
1.2.1.2
Language Driver
English American
Size Driver
8.6MB
File Name
lj191en.exe
Observations
HP Mass Storage Resource Manager, Windows 95/98.
The HP Resource Manager is a Windows 95/98 application that allows you to download, delete, and manage your printer-based fonts (PCL and Postscript) and PCL5e macros (electronic forms, overlays, letterhead etc.). The Resource Manager supports the most common network protocols (TCP/IP & IPX/SPX), as well as direct parallel port connection for greater connectivity to meet your business needs. It provides ease-of-use through an intuitive user-interface and a full, on-line help facility.
The HP Resource Manager is fully compatible with the HP LaserJet 5 (excl. LaserJet 5P/5MP/5L) with C3930A/C3931A Flash SIMM's, 5Si with C2965A Disk Drive, 4000, 5000, and 8000 series printers with C4286A/C4287A Flash DIMM's or C2985A Disk Drive.
Download Info
To download into a temporary, default directory on your PC, download the file from the section below. Note the directory and path where the file is saved to. You will need to access this file on your PC.
To expand (unzip) this file; find the directory where the file was saved to. Double click on the file.
Please note that this file will create and extract into a default directory on your hard drive. You will have the opportunity to change the Drive and Directory.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Screen reader accessibility for status and alerts
Operating System
Windows 95-98-Me-NT4-2000-XP
Version
3.1
Language Driver
English American
Size Driver
6.2MB
File Name
lj1080en.exe
Date
30 Jul 2003
Observations
Important Information
Some printers may experience slower performance due to the different ways that some computers and printers handle bi-directional communication of the parallel (LPT) interface. Some larger, more complex jobs may need more time to process and print due to the increased communication traffic over the parallel interface.
Download Info
Below are easy-to-follow instructions for downloading and installing the Screen Reader Accessibility for Status and Alerts software.
Before proceeding with the software installation, the printer must first be properly set up, and the printer drivers must be already installed, and your computer must be ready to print.
Download the file to a folder on your hard drive.
Close any screen savers, virus protection programs, or any other software programs that are running on your computer.
Go to the folder where you downloaded the software and double click the file to extract the files.
Go to the folder where these files were extracted to, for example c:\lj1080, and double click on the setup.exe file to start the installation process. During the install process you will be asked to select options for "Display status window when." We suggest you select all of the options for Screen Reader Accessibility.
You only need to install this software once on each computer for all HP LaserJet printers connected, either on the network or direct.
Open the "Job Status and Alerts" software. We suggest you review each of the options for status and alerts and select the ones you wish to receive for your printer.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Printer Status Alerts and Internet-Enabled Supplies Ordering IESO SureSupply for Direct Connect
Operating System
Windows 95-98-Me-NT4-2000-XP
Version
3.1
Language Driver
English American
Size Driver
6.2MB
File Name
lj1079en.exe
Observations
Important Information
Internet enabled supplies ordering for direct connect to your PC is included in the Printer Status and Alerts software. After reviewing or being alerted to your supplies status, you can order your supplies on-line.
You will need to install the Printer Status and Alerts software once on each computer for all supported HP LaserJet printers to be connected. Not all printers are supported in each software. Please read the
Some printers may experience slower performance due to the different ways that some computers and printers handle bi-directional communication of the parallel (LPT) interface. Some larger, more complex jobs may need more time to process and print due to the increased communication traffic over the parallel interface.
Download Info
Below are easy-to-follow instructions for downloading and installing the Printer Status/Alerts and Internet Enabled Supplies Ordering software.
Before proceeding with the software installation, the printer must first be properly set up, the printer drivers must already be installed, and your computer must be ready to print.
Download the file to a folder on your hard drive.
Close any screen savers, virus protection programs, or any other software programs that are running on your computer.
Go to the folder where you downloaded the software and double click the file to extract the files.
Go to the folder where these files were extracted to, for example c:\lj1079, and double click on the setup.exe file to start the installation process. During the install process you will be asked to select options for "Display status window when." We suggest you select all of the options for Printer Status/Alerts.
You only need to install this software once on each computer for all supported HP printers connected, either on the network or direct.
Open the "Printer Status and Alerts" software. We suggest you review each of the options for status and alerts and select the ones you wish to receive for your printer.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 5e Driver
Operating System
Windows NT3.5
Version
3.44
Language Driver
English American
Size Driver
194KB
File Name
lj804en.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Download into a temporary directory.
Run the file name to extract.
See the Readme file for installation instructions.
Supports the following HP Printers
LJ8000, LJ8000 N, LJ8000 DN
LJ8100, LJ8100 N, LJ8100 DN
Mopier 240
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
AutoCAD 13-14 HP-GL2 Driver
Operating System
Windows NT3.5-NT4
Version
4.5
Language Driver
English American
Size Driver
2.1MB
File Name
lj133en.exe
Observations
HP LaserJet AutoCAD 13/14 HP-GL/2 Driver
Download Info
To download into a temporary, default directory on your PC, download the file from the section below. Note the directory and path where the file is saved to. You will need to access this file on your PC.
To expand (unzip) this file; find the directory where the file was saved to. Double click on the file.
Please note that this file will create and extract into a default directory on your hard drive. You will have the opportunity to change the Drive and Directory.
This driver supports the following HP LaserJets:
LJ240 Mopier, LJ320 Mopier
CLJ 8550, CLJ8550 N, CLJ 8550 DN, CLJ8550 GN, CLJ8550 MFP
CLJ 8500, CLJ8500 N, CLJ 8500 DN
LJ8150, LJ8150 N, LJ8150 DN, LJ8150 HN
LJ8100, LJ8100 N, LJ8100 DN
LJ8000, LJ8000 N, LJ8000 DN
LJ5000, LJ5000 N, LJ5000 GN
LJ4050, LJ4050 T, LJ4050 N, LJ4050 TN
LJ4000, LJ4000 T, LJ4000 N, LJ4000 TN
LJ5, LJ5M, LJ5N, LJ5Si, LJ5SiMX, LJ5SiNX, 5Si Mopier
LJ4, LJ4M, LJ4+, LJ4M+, LJ4Si, LJ4SiMX, LJ4V, LJ4MV
LJIlI, LJIIID, LJIIISi
LJII,LJIID: w/GL/2cartridge
This driver does not support the following HP LaserJets
CLJ, CLJ5, CLJ5M
LJ6P, LJ6MP, LJ6L
LJ5P, LJ5MP
LJ4P, LJ4MP, LJ4L, LJ4ML
LJIIIP
LJIIP, LJIIP+
LJ2000, LJ500+, LJ, LJ+
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Resource Manager
Operating System
Windows NT4
Version
1.2.1.2
Language Driver
English American
Size Driver
8.7MB
File Name
lj192en.exe
Observations
HPMass Storage Resource Manager, Windows NT 4.0.
The HPResource Manager is a Windows NT 4.0 application that allows you to download, delete, and manage your printer-based fonts (PCL and Postscript) and PCL5e macros (electronic forms, overlays, letterhead etc.). The Resource Manager supports the most common network protocols (TCP/IP & IPX/SPX), as well as direct parallel port connection for greater connectivity to meet your business needs. It provides ease-of-use through an intuitive user-interface and a full, on-line help facility.
The HPResource Manager is fully compatible with the HPLaserJet 5 (excl. LaserJet 5P/5MP/5L) with C3930A/C3931A Flash SIMM's, 5Si with C2965A Disk Drive, 4000, 5000, and 8000 series printers with C4286A/C4287A Flash DIMM's or C2985A Disk Drive.
Download Info
To download into a temporary, default directory on your PC, download the file from the section below. Note the directory and path where the file is saved to. You will need to access this file on your PC.
To expand (unzip) this file; find the directory where the file was saved to. Double click on the file.
Please note that this file will create and extract into a default directory on your hard drive. You will have the opportunity to change the Drive and Directory.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 6 Driver
Operating System
Windows NT4
Version
4.3.2.177
Language Driver
English American
Size Driver
1.4MB
File Name
lj359en.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\lj359). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\lj359).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 5e Driver
Operating System
Windows NT4
Version
4.3.2.177
Language Driver
English American
Size Driver
1.4MB
File Name
lj357en.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\lj357). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\lj357).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PostScript Point and Print Bundle
Operating System
Windows NT4-2000
Version
1.0
Language Driver
English American
Size Driver
648KB
File Name
hpmopier240_ps_en.exe
Observations
Download Info
To download into a temporary, default directory on your PC, download the file from the section below. Note the directory and path where the file is saved to. You will need to access this file on your PC.
To expand (unzip) this file; find the directory where the file was saved to. Double click on the file.
Please note that this file will create and extract into a default directory on your hard drive. You will have the opportunity to change the Drive and Directory.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Digital sending software
Operating System
Windows NT4-2000-XP
Version
3.7.5
Language Driver
English American
Size Driver
50.3MB
File Name
ljmfpdss.exe
Date
20 Jul 2004
Observations
Readme
This upgrade of the HP MFP Digital Sending Software provides digital sending support for the following products:
HP Mopier 240
HP Mopier 320
HP LaserJet 8000 MFP
HP LaserJet 8100 MFP
HP LaserJet 8150 MFP
WARNING: Do not upgrade version 2.x of the Digital Sender Module unless you have an HP MFP Digital Sending Software version 3.0 license (Secure Access or Communications). If you are upgrading a version of the Digital Sender Module version 2.x, the Send-to-Email, Send-to-Fax, and NT Authentication licenses, will be converted to 'legacy licenses' but these features will not be functional until a Digital Sending Software version 3.0 license is entered in the licensing tab.
A Secure Access license provides Send to Email and Authentication
A Communications license provides Send to Email, Authentication, and Send to Fax
HP MFP DSS license packs are available as follows:
HP DSS 3.0 - Secure Access
5 mfp license pack T1929AA (option 0AD)
10 mfp license pack T1929AA (option 0A9)
50 mfp license pack T1929AA (option 0AA)
HP DSS 3.0 - Communications
5 mfp license pack T1930AA (option 0AD)
10 mfp license pack T1930AA (option 0A9)
50 mfp license pack T1930AA (option 0AA)
IMPORTANT NOTE: These license packs are cumulative. For example, if you are upgrading version 2.x of the Digital Sender Module and have installed two email licenses, two send-to-fax licenses, and two NT-authentication licenses, and purchase a five mfp Communications license pack, the six legacy license will be upgraded to Communications licenses and the Digital Sending Software will then be able to support 11 MFPs total.
IMPORTANT NOTE: This software is compatible with all released versions of MFP firmware but there may be significant advantages in upgrading to the latest release versions of firmware.
Revision History
Current Version 3.7.5
Previous Versions3.6.6
3.5.45
3.4.7
3.0.112
Return to Top
Why Would I Need to Perform an Upgrade?
HP periodically releases a new version of the Digital Sending Software to provide defect fixes and product enhancements. An upgrade to the digital sending software may be necessary if you determine that you will benefit from an improvement that is documented in the readmefw.txt file.
Return to Top
Determining the Current Revision Level of the Digital Sending Software
To determine the current revision level:
Go to the Start Menu.
Select Programs
Select Hewlett-Packard
Select HP MFP Digital Sending Software (or with pre 3.x software select HP Digital Sender Module)
Select the Configuration Utility
Select the 'About' tab. The revision level will be displayed on the About tab.
Return to Top
Download and Upgrade Information
Download into a temporary directory of your choice.
Run the file name to extract. Please note that this file extracts into a directory. You will have the opportunity to change the drive and directory.
You are now ready to perform the upgrade process. For a successful upgrade, these file(s) MUST be prepared per the 'Upgrade' instructions in the readmefw.txt file.
Return to Top
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
HP mfp digital sending Software
Operating System
Windows NT4-2000-XP
Version
3.7.5
Language Driver
English American
Size Driver
50.3MB
File Name
ljmfpdss.exe
Date
20 Jul 2004
Observations
Readme
This upgrade of the hp MFP Digital Sending Software provides digital sending support for the following products:
hp Mopier 240
hp Mopier 320
hp LaserJet 8000 MFP
hp LaserJet 8100 MFP
hp LaserJet 8150 MFP
WARNING: Do not upgrade version 2.x of the Digital Sender Module unless you have an hp MFP Digital Sending Software version 3.0 license (Secure Access or Communications). If you are upgrading a version of the Digital Sender Module version 2.x, the Send-to-Email, Send-to-Fax, and NT Authentication licenses, will be converted to 'legacy licenses' but these features will not be functional until a Digital Sending Software version 3.0 license is entered in the licensing tab.
A Secure Access license provides Send to Email and Authentication
A Communications license provides Send to Email, Authentication, and Send to Fax
hp MFP DSS license packs are available as follows:
hp DSS 3.0 - Secure Access
5 mfp license pack T1929AA (option 0AD)
10 mfp license pack T1929AA (option 0A9)
50 mfp license pack T1929AA (option 0AA)
hp DSS 3.0 - Communications
5 mfp license pack T1930AA (option 0AD)
10 mfp license pack T1930AA (option 0A9)
50 mfp license pack T1930AA (option 0AA)
IMPORTANT NOTE: These license packs are cumulative. For example, if you are upgrading version 2.x of the Digital Sender Module and have installed two email licenses, two send-to-fax licenses, and two NT-authentication licenses, and purchase a five mfp Communications license pack, the six legacy license will be upgraded to Communications licenses and the Digital Sending Software will then be able to support 11 MFPs total.
IMPORTANT NOTE: This software is compatible with all released versions of MFP firmware but there may be significant advantages in upgrading to the latest release versions of firmware.
Revision History
Current Version 3.7.5
Previous Versions3.6.6
3.5.45
3.4.7
3.0.112
Return to Top
Why Would I Need to Perform an Upgrade?
HP periodically releases a new version of the Digital Sending Software to provide defect and product enhancements. An upgrade to the digital sending software may be necessary if you determine that you will benefit from an improvement that is documented in the readmefw.txt file.
Return to Top
Determining the Current Revision Level of the Digital Sending Software
To determine the current revision level:
Go to the Start Menu.
Select Programs
Select Hewlett-Packard
Select hp MFP Digital Sending Software (or with pre 3.x software select hp Digital Sender Module)
Select the Configuration Utility
Select the 'About' tab. The revision level will be displayed on the About tab.
Return to Top
Download and Upgrade Information
Download into a temporary directory of your choice.
Run the file name to extract. Please note that this file extracts into a directory. You will have the opportunity to change the drive and directory.
You are now ready to perform the upgrade process. For a successful upgrade, these file(s) MUST be prepared per the 'Upgrade' instructions in the readmefw.txt file.
Return to Top
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Monochrome printing software and utility
Operating System
Mac OS 8 Mac OS 9
Version
1.10
Language Utilities
English Easterm European
Size Driver
3.3MB
File Name
ljmonoee.sit
Date
15 Dec 2001
Observations
The HP LaserJet Installer provides HP LaserJet PostScript printing support for the Mac OS 8.6, 9.0, 9.04, 9.1, and 9.2 operating systems.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
HP LaserJet monochrome printing Software and utility
Operating System
Mac OS 8-Mac OS 9
Version
1.10
Language Utilities
English Eastern European
Size Driver
3.3MB
File Name
ljmonoee.sit
Date
15 Dec 2001
Observations
The HP LaserJet Installer provides HP LaserJet PostScript printing support for the Mac OS 8.6, 9.0, 9.04, 9.1, and 9.2 operating systems.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 5e Driver
Operating System
Windows NT3.5
Version
3.44
Language Driver
English Eastern European
Size Driver
194KB
File Name
lj804ee.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Download into a temporary directory.
Run the file name to extract.
See the Readme file for installation instructions.
Supports the following HPPrinters
LJ8000, LJ8000 N, LJ8000 DN
LJ8100, LJ8100 N, LJ8100 DN
Mopier 240
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Monochrome printing software and utility
Operating System
Mac OS 8 Mac OS 9
Version
1.5
Language Utilities
Finnish
Size Driver
4.4MB
File Name
ljmonofi.sit
Date
14 Nov 2003
Observations
The HP LaserJet Installer provides HP LaserJet PostScript printing support for the Mac OS 8.6, 9.0, 9.04, 9.1, and 9.2 operating systems.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
HP LaserJet monochrome printing Software and utility
Operating System
Mac OS 8-Mac OS 9
Version
1.5
Language Utilities
Finnish
Size Driver
4.4MB
File Name
ljmonofi.sit
Date
14 Nov 2003
Observations
The HP LaserJet Installer provides HP LaserJet PostScript printing support for the Mac OS 8.6, 9.0, 9.04, 9.1, and 9.2 operating systems.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PostScript Driver
Operating System
OS/2
Version
30.589
Language Driver
Finnish
Size Driver
809KB
File Name
lj275fi.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Download into a temporary directory.
Run the file name to extract.
See the readme file for detailed installation instructions.
Supports the following LaserJets
Mopier 240, Mopier 320
LJ8000, LJ8000 N, LJ8000 DN
LJ8100, LJ8100 N, LJ8100 DN
LJ5000, LJ5000 N, LJ5000 GN
LJ4050, LJ4050 T, LJ4050 N, LJ4050 TN
LJ4000, LJ4000 T, LJ4000 N, LJ4000 TN
LJ2100, LJ2100M, LJ2100TN
CLJ, CLJ5, CLJ5M
CLJ8500, CLJ8500 N, CLJ8500 DN
CLJ4500, CLJ4500 N, CLJ4500 DN
LJ6MP
LJ5M, LJ5MP, LJ5SiMX, 5Si Mopier
LJ4M, LJ4M+, LJ4MP, LJ4ML, LJ4SiMX, LJ4MV
LJIII, LJIIIP, LJIIID, LJIIISi
*LJII, LJIID, LJIIP, LJIIP+
LJ, LJ+, LJ 500+, LJ2000
*With sufficient memory and/or PostScript Cartridge
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 6 and 5e Drivers
Operating System
OS/2
Version
30.728
Language Driver
Finnish
Size Driver
1.1MB
File Name
lj273fi.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Download into a temporary directory.
Run the file name to extract.
See the readme file for detailed installation instructions.
Supports the following LaserJets
Mopier 240, Mopier 320
LJ8000, LJ8000 N, LJ8000 DN
LJ5000, LJ5000 N, LJ5000 GN
LJ1100, LJ1100A
LJ2100, LJ2100M, LJ2100TN
LJ8100, LJ8100 N, LJ8100 DN
LJ4050, LJ4050 T, LJ4050 N, LJ4050 TN
LJ4000, LJ4000 T, LJ4000 N, LJ4000 TN
CLJ5, CLJ5M, CLJ
CLJ4500, CLJ4500 N, CLJ4500 DN
CLJ8500, CLJ8500 N, CLJ8500 DN
LJ6P, LJ6MP, LJ6L
LJ5, LJ5P, LJ5M, LJ5N, LJ5Si, LJ5SiMX, LJ5SiNX, 5Si Mopier
LJ4, LJ4+, LJ4M, LJ4M+, LJ4P, LJ4MP, LJ4L, LJ4ML, LJ4Si, LJ4SiMX, LJ4V, LJ4MV
LJIII, LJIIIP, LJIIID, LJIIISi
LJII, LJIID, LJIIP, LJIIP+
LJ, LJ+, LJ 500+, LJ2000
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 6 Printer Driver
Operating System
Windows 2000-XP
Version
4.3.2.138
Language Driver
Finnish
Size Driver
1.5MB
File Name
lj1143fi.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\ljm240). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\ljm240).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 5e Printer Driver
Operating System
Windows 2000-XP
Version
4.3..2.138
Language Driver
Finnish
Size Driver
1.5MB
File Name
lj1142fi.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\ljm240). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\ljm240).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Printer Status Alerts and Internet-Enabled Supplies Ordering IESO SureSupply for Direct Connect
Operating System
Windows 95-98-Me-NT4-2000-XP
Version
3.1
Language Driver
Finnish
Size Driver
6.2MB
File Name
lj1079fi.exe
Observations
Important Information
Internet enabled supplies ordering for direct connect to your PC is included in the Printer Status and Alerts software. After reviewing or being alerted to your supplies status, you can order your supplies on-line.
You will need to install the Printer Status and Alerts software once on each computer for all supported HP LaserJet printers to be connected. Not all printers are supported in each software. Please read the
Some printers may experience slower performance due to the different ways that some computers and printers handle bi-directional communication of the parallel (LPT) interface. Some larger, more complex jobs may need more time to process and print due to the increased communication traffic over the parallel interface.
Download Info
Below are easy-to-follow instructions for downloading and installing the Printer Status/Alerts and Internet Enabled Supplies Ordering software.
Before proceeding with the software installation, the printer must first be properly set up, the printer drivers must already be installed, and your computer must be ready to print.
Download the file to a folder on your hard drive.
Close any screen savers, virus protection programs, or any other software programs that are running on your computer.
Go to the folder where you downloaded the software and double click the file to extract the files.
Go to the folder where these files were extracted to, for example c:\lj1079, and double click on the setup.exe file to start the installation process. During the install process you will be asked to select options for "Display status window when." We suggest you select all of the options for Printer Status/Alerts.
You only need to install this software once on each computer for all supported HP printers connected, either on the network or direct.
Open the "Printer Status and Alerts" software. We suggest you review each of the options for status and alerts and select the ones you wish to receive for your printer.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 5e Driver
Operating System
Windows NT3.5
Version
3.44
Language Driver
Finnish
Size Driver
197KB
File Name
lj804fi.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Download into a temporary directory.
Run the file name to extract.
See the Readme file for installation instructions.
Supports the following HPPrinters
LJ8000, LJ8000 N, LJ8000 DN
LJ8100, LJ8100 N, LJ8100 DN
Mopier 240
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 5e Driver
Operating System
Windows NT4
Version
4.3.2.177
Language Driver
Finnish
Size Driver
1.4MB
File Name
lj357fi.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\lj357). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\lj357).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 6 Driver
Operating System
Windows NT4
Version
4.3.2.177
Language Driver
Finnish
Size Driver
1.4MB
File Name
lj359fi.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\lj359). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\lj359).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
HP mfp digital sending Software
Operating System
Windows NT4-2000-XP
Version
3.7.5
Language Driver
Finnish
Size Driver
50.3MB
File Name
ljmfpdss.exe
Date
20 Jul 2004
Observations
Readme
This upgrade of the hp MFP Digital Sending Software provides digital sending support for the following products:
hp Mopier 240
hp Mopier 320
hp LaserJet 8000 MFP
hp LaserJet 8100 MFP
hp LaserJet 8150 MFP
WARNING: Do not upgrade version 2.x of the Digital Sender Module unless you have an hp MFP Digital Sending Software version 3.0 license (Secure Access or Communications). If you are upgrading a version of the Digital Sender Module version 2.x, the Send-to-Email, Send-to-Fax, and NT Authentication licenses, will be converted to 'legacy licenses' but these features will not be functional until a Digital Sending Software version 3.0 license is entered in the licensing tab.
A Secure Access license provides Send to Email and Authentication
A Communications license provides Send to Email, Authentication, and Send to Fax
hp MFP DSS license packs are available as follows:
hp DSS 3.0 - Secure Access
5 mfp license pack T1929AA (option 0AD)
10 mfp license pack T1929AA (option 0A9)
50 mfp license pack T1929AA (option 0AA)
hp DSS 3.0 - Communications
5 mfp license pack T1930AA (option 0AD)
10 mfp license pack T1930AA (option 0A9)
50 mfp license pack T1930AA (option 0AA)
IMPORTANT NOTE: These license packs are cumulative. For example, if you are upgrading version 2.x of the Digital Sender Module and have installed two email licenses, two send-to-fax licenses, and two NT-authentication licenses, and purchase a five mfp Communications license pack, the six legacy license will be upgraded to Communications licenses and the Digital Sending Software will then be able to support 11 MFPs total.
IMPORTANT NOTE: This software is compatible with all released versions of MFP firmware but there may be significant advantages in upgrading to the latest release versions of firmware.
Revision History
Current Version 3.7.5
Previous Versions3.6.6
3.5.45
3.4.7
3.0.112
Return to Top
Why Would I Need to Perform an Upgrade?
HP periodically releases a new version of the Digital Sending Software to provide defect and product enhancements. An upgrade to the digital sending software may be necessary if you determine that you will benefit from an improvement that is documented in the readmefw.txt file.
Return to Top
Determining the Current Revision Level of the Digital Sending Software
To determine the current revision level:
Go to the Start Menu.
Select Programs
Select Hewlett-Packard
Select hp MFP Digital Sending Software (or with pre 3.x software select hp Digital Sender Module)
Select the Configuration Utility
Select the 'About' tab. The revision level will be displayed on the About tab.
Return to Top
Download and Upgrade Information
Download into a temporary directory of your choice.
Run the file name to extract. Please note that this file extracts into a directory. You will have the opportunity to change the drive and directory.
You are now ready to perform the upgrade process. For a successful upgrade, these file(s) MUST be prepared per the 'Upgrade' instructions in the readmefw.txt file.
Return to Top
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Digital sending software
Operating System
Windows NT4-2000-XP
Version
3.7.5
Language Driver
Finnish
Size Driver
50.3MB
File Name
ljmfpdss.exe
Date
20 Jul 2004
Observations
Readme
This upgrade of the HP MFP Digital Sending Software provides digital sending support for the following products:
HP Mopier 240
HP Mopier 320
HP LaserJet 8000 MFP
HP LaserJet 8100 MFP
HP LaserJet 8150 MFP
WARNING: Do not upgrade version 2.x of the Digital Sender Module unless you have an HP MFP Digital Sending Software version 3.0 license (Secure Access or Communications). If you are upgrading a version of the Digital Sender Module version 2.x, the Send-to-Email, Send-to-Fax, and NT Authentication licenses, will be converted to 'legacy licenses' but these features will not be functional until a Digital Sending Software version 3.0 license is entered in the licensing tab.
A Secure Access license provides Send to Email and Authentication
A Communications license provides Send to Email, Authentication, and Send to Fax
HP MFP DSS license packs are available as follows:
HP DSS 3.0 - Secure Access
5 mfp license pack T1929AA (option 0AD)
10 mfp license pack T1929AA (option 0A9)
50 mfp license pack T1929AA (option 0AA)
HP DSS 3.0 - Communications
5 mfp license pack T1930AA (option 0AD)
10 mfp license pack T1930AA (option 0A9)
50 mfp license pack T1930AA (option 0AA)
IMPORTANT NOTE: These license packs are cumulative. For example, if you are upgrading version 2.x of the Digital Sender Module and have installed two email licenses, two send-to-fax licenses, and two NT-authentication licenses, and purchase a five mfp Communications license pack, the six legacy license will be upgraded to Communications licenses and the Digital Sending Software will then be able to support 11 MFPs total.
IMPORTANT NOTE: This software is compatible with all released versions of MFP firmware but there may be significant advantages in upgrading to the latest release versions of firmware.
Revision History
Current Version 3.7.5
Previous Versions3.6.6
3.5.45
3.4.7
3.0.112
Return to Top
Why Would I Need to Perform an Upgrade?
HP periodically releases a new version of the Digital Sending Software to provide defect fixes and product enhancements. An upgrade to the digital sending software may be necessary if you determine that you will benefit from an improvement that is documented in the readmefw.txt file.
Return to Top
Determining the Current Revision Level of the Digital Sending Software
To determine the current revision level:
Go to the Start Menu.
Select Programs
Select Hewlett-Packard
Select HP MFP Digital Sending Software (or with pre 3.x software select HP Digital Sender Module)
Select the Configuration Utility
Select the 'About' tab. The revision level will be displayed on the About tab.
Return to Top
Download and Upgrade Information
Download into a temporary directory of your choice.
Run the file name to extract. Please note that this file extracts into a directory. You will have the opportunity to change the drive and directory.
You are now ready to perform the upgrade process. For a successful upgrade, these file(s) MUST be prepared per the 'Upgrade' instructions in the readmefw.txt file.
Return to Top
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Monochrome printing software and utility
Operating System
Mac OS 8 Mac OS 9
Version
1.5
Language Utilities
French
Size Driver
4.4MB
File Name
ljmonofr.sit
Date
14 Nov 2003
Observations
The HP LaserJet Installer provides HP LaserJet PostScript printing support for the Mac OS 8.6, 9.0, 9.04, 9.1, and 9.2 operating systems.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
HP LaserJet monochrome printing Software and utility
Operating System
Mac OS 8-Mac OS 9
Version
1.5
Language Utilities
French
Size Driver
4.4MB
File Name
ljmonofr.sit
Date
14 Nov 2003
Observations
The HP LaserJet Installer provides HP LaserJet PostScript printing support for the Mac OS 8.6, 9.0, 9.04, 9.1, and 9.2 operating systems.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
AutoCAD 10-11-12-13 HP-GL2 Driver
Operating System
MS-DOS
Version
4.5
Language Driver
French
Size Driver
791KB
File Name
lj131fr.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Download into a temporary directory.
Run the file name to extract.
See the readme file for detailed installation instructions.
This driver supports the following HP LaserJets:
LJ240 Mopier, LJ320 Mopier
CLJ 8500, CLJ8500 N, CLJ 8500 DN
LJ8100, LJ8100 N, LJ8100 DN
LJ8000, LJ8000 N, LJ8000 DN
LJ5000, LJ5000 N, LJ5000 GN
LJ4050, LJ4050 T, LJ4050 N, LJ4050 TN
LJ4000, LJ4000 T, LJ4000 N, LJ4000 TN
LJ5, LJ5M, LJ5N, LJ5Si, LJ5SiMX, LJ5SiNX, 5Si Mopier
LJ4, LJ4M, LJ4+, LJ4M+, LJ4Si, LJ4SiMX, LJ4V, LJ4MV
LJII, LJIIID, LJIIISi
LJII,LJIID: w/GL/2cartridge
This driver does not support the following HP LaserJets
CLJ, CLJ5, CLJ5M
LJ6P, LJ6MP, LJ6L
LJ5P, LJ5MP
LJ4P, LJ4MP, LJ4L, LJ4ML
LJIIIP
LJIIP, LJIIP+
LJ2000, LJ500+, LJ, LJ+
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 6 and 5e Drivers
Operating System
OS/2
Version
30.728
Language Driver
French
Size Driver
1.1MB
File Name
lj273fr.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Download into a temporary directory.
Run the file name to extract.
See the readme file for detailed installation instructions.
Supports the following LaserJets
Mopier 240, Mopier 320
LJ8000, LJ8000 N, LJ8000 DN
LJ5000, LJ5000 N, LJ5000 GN
LJ1100, LJ1100A
LJ2100, LJ2100M, LJ2100TN
LJ8100, LJ8100 N, LJ8100 DN
LJ4050, LJ4050 T, LJ4050 N, LJ4050 TN
LJ4000, LJ4000 T, LJ4000 N, LJ4000 TN
CLJ5, CLJ5M, CLJ
CLJ4500, CLJ4500 N, CLJ4500 DN
CLJ8500, CLJ8500 N, CLJ8500 DN
LJ6P, LJ6MP, LJ6L
LJ5, LJ5P, LJ5M, LJ5N, LJ5Si, LJ5SiMX, LJ5SiNX, 5Si Mopier
LJ4, LJ4+, LJ4M, LJ4M+, LJ4P, LJ4MP, LJ4L, LJ4ML, LJ4Si, LJ4SiMX, LJ4V, LJ4MV
LJIII, LJIIIP, LJIIID, LJIIISi
LJII, LJIID, LJIIP, LJIIP+
LJ, LJ+, LJ 500+, LJ2000
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PostScript Driver
Operating System
OS/2
Version
30.589
Language Driver
French
Size Driver
806KB
File Name
lj275fr.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Download into a temporary directory.
Run the file name to extract.
See the readme file for detailed installation instructions.
Supports the following LaserJets
Mopier 240, Mopier 320
LJ8000, LJ8000 N, LJ8000 DN
LJ8100, LJ8100 N, LJ8100 DN
LJ5000, LJ5000 N, LJ5000 GN
LJ4050, LJ4050 T, LJ4050 N, LJ4050 TN
LJ4000, LJ4000 T, LJ4000 N, LJ4000 TN
LJ2100, LJ2100M, LJ2100TN
CLJ, CLJ5, CLJ5M
CLJ8500, CLJ8500 N, CLJ8500 DN
CLJ4500, CLJ4500 N, CLJ4500 DN
LJ6MP
LJ5M, LJ5MP, LJ5SiMX, 5Si Mopier
LJ4M, LJ4M+, LJ4MP, LJ4ML, LJ4SiMX, LJ4MV
LJIII, LJIIIP, LJIIID, LJIIISi
*LJII, LJIID, LJIIP, LJIIP+
LJ, LJ+, LJ 500+, LJ2000
*With sufficient memory and/or PostScript Cartridge
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 5e Printer Driver
Operating System
Windows 2000-XP
Version
4.3..2.138
Language Driver
French
Size Driver
1.5MB
File Name
lj1142fr.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\ljm240). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\ljm240).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 6 Printer Driver
Operating System
Windows 2000-XP
Version
4.3.2.138
Language Driver
French
Size Driver
1.5MB
File Name
lj1143fr.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\ljm240). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\ljm240).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
AutoCAD 12-13 HP-GL2 Driver
Operating System
Windows 3.1
Version
4.1b
Language Driver
French
Size Driver
1.1MB
File Name
lj132fr.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Download into a temporary directory.
Run the file name to extract.
See the readme file for detailed installation instructions.
This driver supports the following HP LaserJets:
LJ240 Mopier, LJ320 Mopier
CLJ 8500, CLJ8500 N, CLJ 8500 DN
LJ8100, LJ8100 N, LJ8100 DN
LJ8000, LJ8000 N, LJ8000 DN
LJ5000, LJ5000 N, LJ5000 GN
LJ4050, LJ4050 T, LJ4050 N, LJ4050 TN
LJ4000, LJ4000 T, LJ4000 N, LJ4000 TN
LJ5, LJ5M, LJ5N, LJ5Si, LJ5SiMX, LJ5SiNX, 5Si Mopier
LJ4, LJ4M, LJ4+, LJ4M+, LJ4Si, LJ4SiMX, LJ4V, LJ4MV
LJII, LJIIID, LJIIISi
LJII,LJIID: w/GL/2cartridge
This driver does not support the following HP LaserJets
CLJ, CLJ5, CLJ5M
LJ6P, LJ6MP, LJ6L
LJ5P, LJ5MP
LJ4P, LJ4MP, LJ4L, LJ4ML
LJIIIP
LJIIP, LJIIP+
LJ2000, LJ500+, LJ, LJ+
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Resource Manager
Operating System
Windows 95-98
Version
1.2.1.2
Language Driver
French
Size Driver
8.7MB
File Name
lj191fr.exe
Observations
HPMass Storage Resource Manager, Windows 95/98.
The HPResource Manager is a Windows 95/98 application that allows you to download, delete, and manage your printer-based fonts (PCL and Postscript) and PCL5e macros (electronic forms, overlays, letterhead etc.). The Resource Manager supports the most common network protocols (TCP/IP & IPX/SPX), as well as direct parallel port connection for greater connectivity to meet your business needs. It provides ease-of-use through an intuitive user-interface and a full, on-line help facility.
The HPResource Manager is fully compatible with the HPLaserJet 5 (excl. LaserJet 5P/5MP/5L) with C3930A/C3931A Flash SIMM's, 5Si with C2965A Disk Drive, 4000, 5000, and 8000 series printers with C4286A/C4287A Flash DIMM's or C2985A Disk Drive.
Download Info
To download into a temporary, default directory on your PC, download the file from the section below. Note the directory and path where the file is saved to. You will need to access this file on your PC.
To expand (unzip) this file; find the directory where the file was saved to. Double click on the file.
Please note that this file will create and extract into a default directory on your hard drive. You will have the opportunity to change the Drive and Directory.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Printer Status Alerts and Internet-Enabled Supplies Ordering IESO SureSupply for Direct Connect
Operating System
Windows 95-98-Me-NT4-2000-XP
Version
3.1
Language Driver
French
Size Driver
6.2MB
File Name
lj1079fr.exe
Observations
Important Information
Internet enabled supplies ordering for direct connect to your PC is included in the Printer Status and Alerts software. After reviewing or being alerted to your supplies status, you can order your supplies on-line.
You will need to install the Printer Status and Alerts software once on each computer for all supported HP LaserJet printers to be connected. Not all printers are supported in each software. Please read the
Some printers may experience slower performance due to the different ways that some computers and printers handle bi-directional communication of the parallel (LPT) interface. Some larger, more complex jobs may need more time to process and print due to the increased communication traffic over the parallel interface.
Download Info
Below are easy-to-follow instructions for downloading and installing the Printer Status/Alerts and Internet Enabled Supplies Ordering software.
Before proceeding with the software installation, the printer must first be properly set up, the printer drivers must already be installed, and your computer must be ready to print.
Download the file to a folder on your hard drive.
Close any screen savers, virus protection programs, or any other software programs that are running on your computer.
Go to the folder where you downloaded the software and double click the file to extract the files.
Go to the folder where these files were extracted to, for example c:\lj1079, and double click on the setup.exe file to start the installation process. During the install process you will be asked to select options for "Display status window when." We suggest you select all of the options for Printer Status/Alerts.
You only need to install this software once on each computer for all supported HP printers connected, either on the network or direct.
Open the "Printer Status and Alerts" software. We suggest you review each of the options for status and alerts and select the ones you wish to receive for your printer.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 5e Driver
Operating System
Windows NT3.5
Version
3.44
Language Driver
French
Size Driver
201KB
File Name
lj804fr.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Download into a temporary directory.
Run the file name to extract.
See the Readme file for installation instructions.
Supports the following HPPrinters
LJ8000, LJ8000 N, LJ8000 DN
LJ8100, LJ8100 N, LJ8100 DN
Mopier 240
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
AutoCAD 13-14 HP-GL2 Driver
Operating System
Windows NT3.5-NT4
Version
4.5
Language Driver
French
Size Driver
2.1MB
File Name
lj133fr.exe
Observations
HPLaserJet AutoCAD 13/14 HP-GL/2 Driver
Download Info
To download into a temporary, default directory on your PC, download the file from the section below. Note the directory and path where the file is saved to. You will need to access this file on your PC.
To expand (unzip) this file; find the directory where the file was saved to. Double click on the file.
Please note that this file will create and extract into a default directory on your hard drive. You will have the opportunity to change the Drive and Directory.
This driver supports the following HPLaserJets:
LJ240 Mopier, LJ320 Mopier
CLJ 8550, CLJ8550 N, CLJ 8550 DN, CLJ8550 GN, CLJ8550 MFP
CLJ 8500, CLJ8500 N, CLJ 8500 DN
LJ8150, LJ8150 N, LJ8150 DN, LJ8150 HN
LJ8100, LJ8100 N, LJ8100 DN
LJ8000, LJ8000 N, LJ8000 DN
LJ5000, LJ5000 N, LJ5000 GN
LJ4050, LJ4050 T, LJ4050 N, LJ4050 TN
LJ4000, LJ4000 T, LJ4000 N, LJ4000 TN
LJ5, LJ5M, LJ5N, LJ5Si, LJ5SiMX, LJ5SiNX, 5Si Mopier
LJ4, LJ4M, LJ4+, LJ4M+, LJ4Si, LJ4SiMX, LJ4V, LJ4MV
LJIlI, LJIIID, LJIIISi
LJII,LJIID: w/GL/2cartridge
This driver does not support the following HPLaserJets
CLJ, CLJ5, CLJ5M
LJ6P, LJ6MP, LJ6L
LJ5P, LJ5MP
LJ4P, LJ4MP, LJ4L, LJ4ML
LJIIIP
LJIIP, LJIIP+
LJ2000, LJ500+, LJ, LJ+
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Resource Manager
Operating System
Windows NT4
Version
1.2.1.2
Language Driver
French
Size Driver
8.7MB
File Name
lj192fr.exe
Observations
HPMass Storage Resource Manager, Windows NT 4.0.
The HPResource Manager is a Windows NT 4.0 application that allows you to download, delete, and manage your printer-based fonts (PCL and Postscript) and PCL5e macros (electronic forms, overlays, letterhead etc.). The Resource Manager supports the most common network protocols (TCP/IP & IPX/SPX), as well as direct parallel port connection for greater connectivity to meet your business needs. It provides ease-of-use through an intuitive user-interface and a full, on-line help facility.
The HPResource Manager is fully compatible with the HPLaserJet 5 (excl. LaserJet 5P/5MP/5L) with C3930A/C3931A Flash SIMM's, 5Si with C2965A Disk Drive, 4000, 5000, and 8000 series printers with C4286A/C4287A Flash DIMM's or C2985A Disk Drive.
Download Info
To download into a temporary, default directory on your PC, download the file from the section below. Note the directory and path where the file is saved to. You will need to access this file on your PC.
To expand (unzip) this file; find the directory where the file was saved to. Double click on the file.
Please note that this file will create and extract into a default directory on your hard drive. You will have the opportunity to change the Drive and Directory.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 5e Driver
Operating System
Windows NT4
Version
4.3.2.177
Language Driver
French
Size Driver
1.4MB
File Name
lj357fr.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\lj357). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\lj357).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 6 Driver
Operating System
Windows NT4
Version
4.3.2.177
Language Driver
French
Size Driver
1.4MB
File Name
lj359fr.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\lj359). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\lj359).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Digital sending software
Operating System
Windows NT4-2000-XP
Version
3.7.5
Language Driver
French
Size Driver
50.3MB
File Name
ljmfpdss.exe
Date
20 Jul 2004
Observations
Readme
This upgrade of the HP MFP Digital Sending Software provides digital sending support for the following products:
HP Mopier 240
HP Mopier 320
HP LaserJet 8000 MFP
HP LaserJet 8100 MFP
HP LaserJet 8150 MFP
WARNING: Do not upgrade version 2.x of the Digital Sender Module unless you have an HP MFP Digital Sending Software version 3.0 license (Secure Access or Communications). If you are upgrading a version of the Digital Sender Module version 2.x, the Send-to-Email, Send-to-Fax, and NT Authentication licenses, will be converted to 'legacy licenses' but these features will not be functional until a Digital Sending Software version 3.0 license is entered in the licensing tab.
A Secure Access license provides Send to Email and Authentication
A Communications license provides Send to Email, Authentication, and Send to Fax
HP MFP DSS license packs are available as follows:
HP DSS 3.0 - Secure Access
5 mfp license pack T1929AA (option 0AD)
10 mfp license pack T1929AA (option 0A9)
50 mfp license pack T1929AA (option 0AA)
HP DSS 3.0 - Communications
5 mfp license pack T1930AA (option 0AD)
10 mfp license pack T1930AA (option 0A9)
50 mfp license pack T1930AA (option 0AA)
IMPORTANT NOTE: These license packs are cumulative. For example, if you are upgrading version 2.x of the Digital Sender Module and have installed two email licenses, two send-to-fax licenses, and two NT-authentication licenses, and purchase a five mfp Communications license pack, the six legacy license will be upgraded to Communications licenses and the Digital Sending Software will then be able to support 11 MFPs total.
IMPORTANT NOTE: This software is compatible with all released versions of MFP firmware but there may be significant advantages in upgrading to the latest release versions of firmware.
Revision History
Current Version 3.7.5
Previous Versions3.6.6
3.5.45
3.4.7
3.0.112
Return to Top
Why Would I Need to Perform an Upgrade?
HP periodically releases a new version of the Digital Sending Software to provide defect fixes and product enhancements. An upgrade to the digital sending software may be necessary if you determine that you will benefit from an improvement that is documented in the readmefw.txt file.
Return to Top
Determining the Current Revision Level of the Digital Sending Software
To determine the current revision level:
Go to the Start Menu.
Select Programs
Select Hewlett-Packard
Select HP MFP Digital Sending Software (or with pre 3.x software select HP Digital Sender Module)
Select the Configuration Utility
Select the 'About' tab. The revision level will be displayed on the About tab.
Return to Top
Download and Upgrade Information
Download into a temporary directory of your choice.
Run the file name to extract. Please note that this file extracts into a directory. You will have the opportunity to change the drive and directory.
You are now ready to perform the upgrade process. For a successful upgrade, these file(s) MUST be prepared per the 'Upgrade' instructions in the readmefw.txt file.
Return to Top
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
HP mfp digital sending Software
Operating System
Windows NT4-2000-XP
Version
3.7.5
Language Driver
French
Size Driver
50.3MB
File Name
ljmfpdss.exe
Date
20 Jul 2004
Observations
Readme
This upgrade of the hp MFP Digital Sending Software provides digital sending support for the following products:
hp Mopier 240
hp Mopier 320
hp LaserJet 8000 MFP
hp LaserJet 8100 MFP
hp LaserJet 8150 MFP
WARNING: Do not upgrade version 2.x of the Digital Sender Module unless you have an hp MFP Digital Sending Software version 3.0 license (Secure Access or Communications). If you are upgrading a version of the Digital Sender Module version 2.x, the Send-to-Email, Send-to-Fax, and NT Authentication licenses, will be converted to 'legacy licenses' but these features will not be functional until a Digital Sending Software version 3.0 license is entered in the licensing tab.
A Secure Access license provides Send to Email and Authentication
A Communications license provides Send to Email, Authentication, and Send to Fax
hp MFP DSS license packs are available as follows:
hp DSS 3.0 - Secure Access
5 mfp license pack T1929AA (option 0AD)
10 mfp license pack T1929AA (option 0A9)
50 mfp license pack T1929AA (option 0AA)
hp DSS 3.0 - Communications
5 mfp license pack T1930AA (option 0AD)
10 mfp license pack T1930AA (option 0A9)
50 mfp license pack T1930AA (option 0AA)
IMPORTANT NOTE: These license packs are cumulative. For example, if you are upgrading version 2.x of the Digital Sender Module and have installed two email licenses, two send-to-fax licenses, and two NT-authentication licenses, and purchase a five mfp Communications license pack, the six legacy license will be upgraded to Communications licenses and the Digital Sending Software will then be able to support 11 MFPs total.
IMPORTANT NOTE: This software is compatible with all released versions of MFP firmware but there may be significant advantages in upgrading to the latest release versions of firmware.
Revision History
Current Version 3.7.5
Previous Versions3.6.6
3.5.45
3.4.7
3.0.112
Return to Top
Why Would I Need to Perform an Upgrade?
HP periodically releases a new version of the Digital Sending Software to provide defect and product enhancements. An upgrade to the digital sending software may be necessary if you determine that you will benefit from an improvement that is documented in the readmefw.txt file.
Return to Top
Determining the Current Revision Level of the Digital Sending Software
To determine the current revision level:
Go to the Start Menu.
Select Programs
Select Hewlett-Packard
Select hp MFP Digital Sending Software (or with pre 3.x software select hp Digital Sender Module)
Select the Configuration Utility
Select the 'About' tab. The revision level will be displayed on the About tab.
Return to Top
Download and Upgrade Information
Download into a temporary directory of your choice.
Run the file name to extract. Please note that this file extracts into a directory. You will have the opportunity to change the drive and directory.
You are now ready to perform the upgrade process. For a successful upgrade, these file(s) MUST be prepared per the 'Upgrade' instructions in the readmefw.txt file.
Return to Top
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Monochrome printing software and utility
Operating System
Mac OS 8 Mac OS 9
Version
1.5
Language Utilities
German
Size Driver
4.4MB
File Name
ljmonoge.sit
Date
14 Nov 2003
Observations
The HP LaserJet Installer provides HP LaserJet PostScript printing support for the Mac OS 8.6, 9.0, 9.04, 9.1, and 9.2 operating systems.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
HP LaserJet monochrome printing Software and utility
Operating System
Mac OS 8-Mac OS 9
Version
1.5
Language Utilities
German
Size Driver
4.4MB
File Name
ljmonoge.sit
Date
14 Nov 2003
Observations
The HP LaserJet Installer provides HP LaserJet PostScript printing support for the Mac OS 8.6, 9.0, 9.04, 9.1, and 9.2 operating systems.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
AutoCAD 10-11-12-13 HP-GL2 Driver
Operating System
MS-DOS
Version
4.5
Language Driver
German
Size Driver
792KB
File Name
lj131ge.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Download into a temporary directory.
Run the file name to extract.
See the readme file for detailed installation instructions.
This driver supports the following HP LaserJets:
LJ240 Mopier, LJ320 Mopier
CLJ 8500, CLJ8500 N, CLJ 8500 DN
LJ8100, LJ8100 N, LJ8100 DN
LJ8000, LJ8000 N, LJ8000 DN
LJ5000, LJ5000 N, LJ5000 GN
LJ4050, LJ4050 T, LJ4050 N, LJ4050 TN
LJ4000, LJ4000 T, LJ4000 N, LJ4000 TN
LJ5, LJ5M, LJ5N, LJ5Si, LJ5SiMX, LJ5SiNX, 5Si Mopier
LJ4, LJ4M, LJ4+, LJ4M+, LJ4Si, LJ4SiMX, LJ4V, LJ4MV
LJII, LJIIID, LJIIISi
LJII,LJIID: w/GL/2cartridge
This driver does not support the following HP LaserJets
CLJ, CLJ5, CLJ5M
LJ6P, LJ6MP, LJ6L
LJ5P, LJ5MP
LJ4P, LJ4MP, LJ4L, LJ4ML
LJIIIP
LJIIP, LJIIP+
LJ2000, LJ500+, LJ, LJ+
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 6 and 5e Drivers
Operating System
OS/2
Version
30.728
Language Driver
German
Size Driver
1.1MB
File Name
lj273ge.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Download into a temporary directory.
Run the file name to extract.
See the readme file for detailed installation instructions.
Supports the following LaserJets
Mopier 240, Mopier 320
LJ8000, LJ8000 N, LJ8000 DN
LJ5000, LJ5000 N, LJ5000 GN
LJ1100, LJ1100A
LJ2100, LJ2100M, LJ2100TN
LJ8100, LJ8100 N, LJ8100 DN
LJ4050, LJ4050 T, LJ4050 N, LJ4050 TN
LJ4000, LJ4000 T, LJ4000 N, LJ4000 TN
CLJ5, CLJ5M, CLJ
CLJ4500, CLJ4500 N, CLJ4500 DN
CLJ8500, CLJ8500 N, CLJ8500 DN
LJ6P, LJ6MP, LJ6L
LJ5, LJ5P, LJ5M, LJ5N, LJ5Si, LJ5SiMX, LJ5SiNX, 5Si Mopier
LJ4, LJ4+, LJ4M, LJ4M+, LJ4P, LJ4MP, LJ4L, LJ4ML, LJ4Si, LJ4SiMX, LJ4V, LJ4MV
LJIII, LJIIIP, LJIIID, LJIIISi
LJII, LJIID, LJIIP, LJIIP+
LJ, LJ+, LJ 500+, LJ2000
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PostScript Driver
Operating System
OS/2
Version
30.589
Language Driver
German
Size Driver
810KB
File Name
lj275ge.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Download into a temporary directory.
Run the file name to extract.
See the readme file for detailed installation instructions.
Supports the following LaserJets
Mopier 240, Mopier 320
LJ8000, LJ8000 N, LJ8000 DN
LJ8100, LJ8100 N, LJ8100 DN
LJ5000, LJ5000 N, LJ5000 GN
LJ4050, LJ4050 T, LJ4050 N, LJ4050 TN
LJ4000, LJ4000 T, LJ4000 N, LJ4000 TN
LJ2100, LJ2100M, LJ2100TN
CLJ, CLJ5, CLJ5M
CLJ8500, CLJ8500 N, CLJ8500 DN
CLJ4500, CLJ4500 N, CLJ4500 DN
LJ6MP
LJ5M, LJ5MP, LJ5SiMX, 5Si Mopier
LJ4M, LJ4M+, LJ4MP, LJ4ML, LJ4SiMX, LJ4MV
LJIII, LJIIIP, LJIIID, LJIIISi
*LJII, LJIID, LJIIP, LJIIP+
LJ, LJ+, LJ 500+, LJ2000
*With sufficient memory and/or PostScript Cartridge
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 6 Printer Driver
Operating System
Windows 2000-XP
Version
4.3.2.138
Language Driver
German
Size Driver
1.5MB
File Name
lj1143ge.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\ljm240). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\ljm240).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 5e Printer Driver
Operating System
Windows 2000-XP
Version
4.3..2.138
Language Driver
German
Size Driver
1.5MB
File Name
lj1142ge.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\ljm240). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\ljm240).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
AutoCAD 12-13 HP-GL2 Driver
Operating System
Windows 3.1
Version
4.1b
Language Driver
German
Size Driver
1.2MB
File Name
lj132ge.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Download into a temporary directory.
Run the file name to extract.
See the readme file for detailed installation instructions.
This driver supports the following HP LaserJets:
LJ240 Mopier, LJ320 Mopier
CLJ 8500, CLJ8500 N, CLJ 8500 DN
LJ8100, LJ8100 N, LJ8100 DN
LJ8000, LJ8000 N, LJ8000 DN
LJ5000, LJ5000 N, LJ5000 GN
LJ4050, LJ4050 T, LJ4050 N, LJ4050 TN
LJ4000, LJ4000 T, LJ4000 N, LJ4000 TN
LJ5, LJ5M, LJ5N, LJ5Si, LJ5SiMX, LJ5SiNX, 5Si Mopier
LJ4, LJ4M, LJ4+, LJ4M+, LJ4Si, LJ4SiMX, LJ4V, LJ4MV
LJII, LJIIID, LJIIISi
LJII,LJIID: w/GL/2cartridge
This driver does not support the following HP LaserJets
CLJ, CLJ5, CLJ5M
LJ6P, LJ6MP, LJ6L
LJ5P, LJ5MP
LJ4P, LJ4MP, LJ4L, LJ4ML
LJIIIP
LJIIP, LJIIP+
LJ2000, LJ500+, LJ, LJ+
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Resource Manager
Operating System
Windows 95-98
Version
1.2.1.2
Language Driver
German
Size Driver
8.7MB
File Name
lj191ge.exe
Observations
HPMass Storage Resource Manager, Windows 95/98.
The HPResource Manager is a Windows 95/98 application that allows you to download, delete, and manage your printer-based fonts (PCL and Postscript) and PCL5e macros (electronic forms, overlays, letterhead etc.). The Resource Manager supports the most common network protocols (TCP/IP & IPX/SPX), as well as direct parallel port connection for greater connectivity to meet your business needs. It provides ease-of-use through an intuitive user-interface and a full, on-line help facility.
The HPResource Manager is fully compatible with the HPLaserJet 5 (excl. LaserJet 5P/5MP/5L) with C3930A/C3931A Flash SIMM's, 5Si with C2965A Disk Drive, 4000, 5000, and 8000 series printers with C4286A/C4287A Flash DIMM's or C2985A Disk Drive.
Download Info
To download into a temporary, default directory on your PC, download the file from the section below. Note the directory and path where the file is saved to. You will need to access this file on your PC.
To expand (unzip) this file; find the directory where the file was saved to. Double click on the file.
Please note that this file will create and extract into a default directory on your hard drive. You will have the opportunity to change the Drive and Directory.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Printer Status Alerts and Internet-Enabled Supplies Ordering IESO SureSupply for Direct Connect
Operating System
Windows 95-98-Me-NT4-2000-XP
Version
3.1
Language Driver
German
Size Driver
6.2MB
File Name
lj1079ge.exe
Observations
Important Information
Internet enabled supplies ordering for direct connect to your PC is included in the Printer Status and Alerts software. After reviewing or being alerted to your supplies status, you can order your supplies on-line.
You will need to install the Printer Status and Alerts software once on each computer for all supported HP LaserJet printers to be connected. Not all printers are supported in each software. Please read the
Some printers may experience slower performance due to the different ways that some computers and printers handle bi-directional communication of the parallel (LPT) interface. Some larger, more complex jobs may need more time to process and print due to the increased communication traffic over the parallel interface.
Download Info
Below are easy-to-follow instructions for downloading and installing the Printer Status/Alerts and Internet Enabled Supplies Ordering software.
Before proceeding with the software installation, the printer must first be properly set up, the printer drivers must already be installed, and your computer must be ready to print.
Download the file to a folder on your hard drive.
Close any screen savers, virus protection programs, or any other software programs that are running on your computer.
Go to the folder where you downloaded the software and double click the file to extract the files.
Go to the folder where these files were extracted to, for example c:\lj1079, and double click on the setup.exe file to start the installation process. During the install process you will be asked to select options for "Display status window when." We suggest you select all of the options for Printer Status/Alerts.
You only need to install this software once on each computer for all supported HP printers connected, either on the network or direct.
Open the "Printer Status and Alerts" software. We suggest you review each of the options for status and alerts and select the ones you wish to receive for your printer.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 5e Driver
Operating System
Windows NT3.5
Version
3.44
Language Driver
German
Size Driver
199KB
File Name
lj804ge.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Download into a temporary directory.
Run the file name to extract.
See the Readme file for installation instructions.
Supports the following HPPrinters
LJ8000, LJ8000 N, LJ8000 DN
LJ8100, LJ8100 N, LJ8100 DN
Mopier 240
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
AutoCAD 13-14 HP-GL2 Driver
Operating System
Windows NT3.5-NT4
Version
4.5
Language Driver
German
Size Driver
2.1MB
File Name
lj133ge.exe
Observations
HPLaserJet AutoCAD 13/14 HP-GL/2 Driver
Download Info
To download into a temporary, default directory on your PC, download the file from the section below. Note the directory and path where the file is saved to. You will need to access this file on your PC.
To expand (unzip) this file; find the directory where the file was saved to. Double click on the file.
Please note that this file will create and extract into a default directory on your hard drive. You will have the opportunity to change the Drive and Directory.
This driver supports the following HPLaserJets:
LJ240 Mopier, LJ320 Mopier
CLJ 8550, CLJ8550 N, CLJ 8550 DN, CLJ8550 GN, CLJ8550 MFP
CLJ 8500, CLJ8500 N, CLJ 8500 DN
LJ8150, LJ8150 N, LJ8150 DN, LJ8150 HN
LJ8100, LJ8100 N, LJ8100 DN
LJ8000, LJ8000 N, LJ8000 DN
LJ5000, LJ5000 N, LJ5000 GN
LJ4050, LJ4050 T, LJ4050 N, LJ4050 TN
LJ4000, LJ4000 T, LJ4000 N, LJ4000 TN
LJ5, LJ5M, LJ5N, LJ5Si, LJ5SiMX, LJ5SiNX, 5Si Mopier
LJ4, LJ4M, LJ4+, LJ4M+, LJ4Si, LJ4SiMX, LJ4V, LJ4MV
LJIlI, LJIIID, LJIIISi
LJII,LJIID: w/GL/2cartridge
This driver does not support the following HPLaserJets
CLJ, CLJ5, CLJ5M
LJ6P, LJ6MP, LJ6L
LJ5P, LJ5MP
LJ4P, LJ4MP, LJ4L, LJ4ML
LJIIIP
LJIIP, LJIIP+
LJ2000, LJ500+, LJ, LJ+
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Resource Manager
Operating System
Windows NT4
Version
1.2.1.2
Language Driver
German
Size Driver
8.7MB
File Name
lj192ge.exe
Observations
HPMass Storage Resource Manager, Windows NT 4.0.
The HPResource Manager is a Windows NT 4.0 application that allows you to download, delete, and manage your printer-based fonts (PCL and Postscript) and PCL5e macros (electronic forms, overlays, letterhead etc.). The Resource Manager supports the most common network protocols (TCP/IP & IPX/SPX), as well as direct parallel port connection for greater connectivity to meet your business needs. It provides ease-of-use through an intuitive user-interface and a full, on-line help facility.
The HPResource Manager is fully compatible with the HPLaserJet 5 (excl. LaserJet 5P/5MP/5L) with C3930A/C3931A Flash SIMM's, 5Si with C2965A Disk Drive, 4000, 5000, and 8000 series printers with C4286A/C4287A Flash DIMM's or C2985A Disk Drive.
Download Info
To download into a temporary, default directory on your PC, download the file from the section below. Note the directory and path where the file is saved to. You will need to access this file on your PC.
To expand (unzip) this file; find the directory where the file was saved to. Double click on the file.
Please note that this file will create and extract into a default directory on your hard drive. You will have the opportunity to change the Drive and Directory.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 6 Driver
Operating System
Windows NT4
Version
4.3.2.177
Language Driver
German
Size Driver
1.4MB
File Name
lj359ge.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\lj359). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\lj359).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 5e Driver
Operating System
Windows NT4
Version
4.3.2.177
Language Driver
German
Size Driver
1.4MB
File Name
lj357ge.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\lj357). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\lj357).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PostScript Point and Print Bundle
Operating System
Windows NT4-2000
Version
1.0
Language Driver
German
Size Driver
655KB
File Name
hpmopier240_ps_ge.exe
Observations
Download Info
This option allows you to download a single file that contains the entire Product Software.
To download into a temporary, default directory on your PC, download the file. Note the directory and path where the file is saved to. You will need to access this file on your PC.
To expand (unzip) this file; find the directory where the file was saved to. Double click on the file.
Please note that this file will create and extract into a default directory on your hard drive. You will have the opportunity to change the Drive and Directory.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Digital sending software
Operating System
Windows NT4-2000-XP
Version
3.7.5
Language Driver
German
Size Driver
50.3MB
File Name
ljmfpdss.exe
Date
20 Jul 2004
Observations
Readme
This upgrade of the HP MFP Digital Sending Software provides digital sending support for the following products:
HP Mopier 240
HP Mopier 320
HP LaserJet 8000 MFP
HP LaserJet 8100 MFP
HP LaserJet 8150 MFP
WARNING: Do not upgrade version 2.x of the Digital Sender Module unless you have an HP MFP Digital Sending Software version 3.0 license (Secure Access or Communications). If you are upgrading a version of the Digital Sender Module version 2.x, the Send-to-Email, Send-to-Fax, and NT Authentication licenses, will be converted to 'legacy licenses' but these features will not be functional until a Digital Sending Software version 3.0 license is entered in the licensing tab.
A Secure Access license provides Send to Email and Authentication
A Communications license provides Send to Email, Authentication, and Send to Fax
HP MFP DSS license packs are available as follows:
HP DSS 3.0 - Secure Access
5 mfp license pack T1929AA (option 0AD)
10 mfp license pack T1929AA (option 0A9)
50 mfp license pack T1929AA (option 0AA)
HP DSS 3.0 - Communications
5 mfp license pack T1930AA (option 0AD)
10 mfp license pack T1930AA (option 0A9)
50 mfp license pack T1930AA (option 0AA)
IMPORTANT NOTE: These license packs are cumulative. For example, if you are upgrading version 2.x of the Digital Sender Module and have installed two email licenses, two send-to-fax licenses, and two NT-authentication licenses, and purchase a five mfp Communications license pack, the six legacy license will be upgraded to Communications licenses and the Digital Sending Software will then be able to support 11 MFPs total.
IMPORTANT NOTE: This software is compatible with all released versions of MFP firmware but there may be significant advantages in upgrading to the latest release versions of firmware.
Revision History
Current Version 3.7.5
Previous Versions3.6.6
3.5.45
3.4.7
3.0.112
Return to Top
Why Would I Need to Perform an Upgrade?
HP periodically releases a new version of the Digital Sending Software to provide defect fixes and product enhancements. An upgrade to the digital sending software may be necessary if you determine that you will benefit from an improvement that is documented in the readmefw.txt file.
Return to Top
Determining the Current Revision Level of the Digital Sending Software
To determine the current revision level:
Go to the Start Menu.
Select Programs
Select Hewlett-Packard
Select HP MFP Digital Sending Software (or with pre 3.x software select HP Digital Sender Module)
Select the Configuration Utility
Select the 'About' tab. The revision level will be displayed on the About tab.
Return to Top
Download and Upgrade Information
Download into a temporary directory of your choice.
Run the file name to extract. Please note that this file extracts into a directory. You will have the opportunity to change the drive and directory.
You are now ready to perform the upgrade process. For a successful upgrade, these file(s) MUST be prepared per the 'Upgrade' instructions in the readmefw.txt file.
Return to Top
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
HP mfp digital sending Software
Operating System
Windows NT4-2000-XP
Version
3.7.5
Language Driver
German
Size Driver
50.3MB
File Name
ljmfpdss.exe
Date
20 Jul 2004
Observations
Readme
This upgrade of the hp MFP Digital Sending Software provides digital sending support for the following products:
hp Mopier 240
hp Mopier 320
hp LaserJet 8000 MFP
hp LaserJet 8100 MFP
hp LaserJet 8150 MFP
WARNING: Do not upgrade version 2.x of the Digital Sender Module unless you have an hp MFP Digital Sending Software version 3.0 license (Secure Access or Communications). If you are upgrading a version of the Digital Sender Module version 2.x, the Send-to-Email, Send-to-Fax, and NT Authentication licenses, will be converted to 'legacy licenses' but these features will not be functional until a Digital Sending Software version 3.0 license is entered in the licensing tab.
A Secure Access license provides Send to Email and Authentication
A Communications license provides Send to Email, Authentication, and Send to Fax
hp MFP DSS license packs are available as follows:
hp DSS 3.0 - Secure Access
5 mfp license pack T1929AA (option 0AD)
10 mfp license pack T1929AA (option 0A9)
50 mfp license pack T1929AA (option 0AA)
hp DSS 3.0 - Communications
5 mfp license pack T1930AA (option 0AD)
10 mfp license pack T1930AA (option 0A9)
50 mfp license pack T1930AA (option 0AA)
IMPORTANT NOTE: These license packs are cumulative. For example, if you are upgrading version 2.x of the Digital Sender Module and have installed two email licenses, two send-to-fax licenses, and two NT-authentication licenses, and purchase a five mfp Communications license pack, the six legacy license will be upgraded to Communications licenses and the Digital Sending Software will then be able to support 11 MFPs total.
IMPORTANT NOTE: This software is compatible with all released versions of MFP firmware but there may be significant advantages in upgrading to the latest release versions of firmware.
Revision History
Current Version 3.7.5
Previous Versions3.6.6
3.5.45
3.4.7
3.0.112
Return to Top
Why Would I Need to Perform an Upgrade?
HP periodically releases a new version of the Digital Sending Software to provide defect and product enhancements. An upgrade to the digital sending software may be necessary if you determine that you will benefit from an improvement that is documented in the readmefw.txt file.
Return to Top
Determining the Current Revision Level of the Digital Sending Software
To determine the current revision level:
Go to the Start Menu.
Select Programs
Select Hewlett-Packard
Select hp MFP Digital Sending Software (or with pre 3.x software select hp Digital Sender Module)
Select the Configuration Utility
Select the 'About' tab. The revision level will be displayed on the About tab.
Return to Top
Download and Upgrade Information
Download into a temporary directory of your choice.
Run the file name to extract. Please note that this file extracts into a directory. You will have the opportunity to change the drive and directory.
You are now ready to perform the upgrade process. For a successful upgrade, these file(s) MUST be prepared per the 'Upgrade' instructions in the readmefw.txt file.
Return to Top
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Printer Status Alerts and Internet-Enabled Supplies Ordering IESO SureSupply for Direct Connect
Operating System
Windows 95-98-Me-NT4-2000-XP
Version
3.1
Language Driver
Hebrew
Size Driver
6.2MB
File Name
lj1079he.exe
Observations
Important Information
Internet enabled supplies ordering for direct connect to your PC is included in the Printer Status and Alerts software. After reviewing or being alerted to your supplies status, you can order your supplies on-line.
You will need to install the Printer Status and Alerts software once on each computer for all supported HP LaserJet printers to be connected. Not all printers are supported in each software. Please read the
Some printers may experience slower performance due to the different ways that some computers and printers handle bi-directional communication of the parallel (LPT) interface. Some larger, more complex jobs may need more time to process and print due to the increased communication traffic over the parallel interface.
Download Info
Below are easy-to-follow instructions for downloading and installing the Printer Status/Alerts and Internet Enabled Supplies Ordering software.
Before proceeding with the software installation, the printer must first be properly set up, the printer drivers must already be installed, and your computer must be ready to print.
Download the file to a folder on your hard drive.
Close any screen savers, virus protection programs, or any other software programs that are running on your computer.
Go to the folder where you downloaded the software and double click the file to extract the files.
Go to the folder where these files were extracted to, for example c:\lj1079, and double click on the setup.exe file to start the installation process. During the install process you will be asked to select options for "Display status window when." We suggest you select all of the options for Printer Status/Alerts.
You only need to install this software once on each computer for all supported HP printers connected, either on the network or direct.
Open the "Printer Status and Alerts" software. We suggest you review each of the options for status and alerts and select the ones you wish to receive for your printer.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 6 and 5e Drivers
Operating System
OS/2
Version
30.728
Language Driver
Hungarian
Size Driver
1.1MB
File Name
lj273hu.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Download into a temporary directory.
Run the file name to extract.
See the readme file for detailed installation instructions.
Supports the following LaserJets
Mopier 240, Mopier 320
LJ8000, LJ8000 N, LJ8000 DN
LJ5000, LJ5000 N, LJ5000 GN
LJ1100, LJ1100A
LJ2100, LJ2100M, LJ2100TN
LJ8100, LJ8100 N, LJ8100 DN
LJ4050, LJ4050 T, LJ4050 N, LJ4050 TN
LJ4000, LJ4000 T, LJ4000 N, LJ4000 TN
CLJ5, CLJ5M, CLJ
CLJ4500, CLJ4500 N, CLJ4500 DN
CLJ8500, CLJ8500 N, CLJ8500 DN
LJ6P, LJ6MP, LJ6L
LJ5, LJ5P, LJ5M, LJ5N, LJ5Si, LJ5SiMX, LJ5SiNX, 5Si Mopier
LJ4, LJ4+, LJ4M, LJ4M+, LJ4P, LJ4MP, LJ4L, LJ4ML, LJ4Si, LJ4SiMX, LJ4V, LJ4MV
LJIII, LJIIIP, LJIIID, LJIIISi
LJII, LJIID, LJIIP, LJIIP+
LJ, LJ+, LJ 500+, LJ2000
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PostScript Driver
Operating System
OS/2
Version
30.589
Language Driver
Hungarian
Size Driver
807KB
File Name
lj275hu.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Download into a temporary directory.
Run the file name to extract.
See the readme file for detailed installation instructions.
Supports the following LaserJets
Mopier 240, Mopier 320
LJ8000, LJ8000 N, LJ8000 DN
LJ8100, LJ8100 N, LJ8100 DN
LJ5000, LJ5000 N, LJ5000 GN
LJ4050, LJ4050 T, LJ4050 N, LJ4050 TN
LJ4000, LJ4000 T, LJ4000 N, LJ4000 TN
LJ2100, LJ2100M, LJ2100TN
CLJ, CLJ5, CLJ5M
CLJ8500, CLJ8500 N, CLJ8500 DN
CLJ4500, CLJ4500 N, CLJ4500 DN
LJ6MP
LJ5M, LJ5MP, LJ5SiMX, 5Si Mopier
LJ4M, LJ4M+, LJ4MP, LJ4ML, LJ4SiMX, LJ4MV
LJIII, LJIIIP, LJIIID, LJIIISi
*LJII, LJIID, LJIIP, LJIIP+
LJ, LJ+, LJ 500+, LJ2000
*With sufficient memory and/or PostScript Cartridge
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 6 Printer Driver
Operating System
Windows 2000-XP
Version
4.3.2.138
Language Driver
Hungarian
Size Driver
1.5MB
File Name
lj1143hu.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\ljm240). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\ljm240).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 5e Printer Driver
Operating System
Windows 2000-XP
Version
4.3..2.138
Language Driver
Hungarian
Size Driver
1.5MB
File Name
lj1142hu.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\ljm240). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\ljm240).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Printer Status Alerts and Internet-Enabled Supplies Ordering IESO SureSupply for Direct Connect
Operating System
Windows 95-98-Me-NT4-2000-XP
Version
3.1
Language Driver
Hungarian
Size Driver
6.2MB
File Name
lj1079hu.exe
Observations
Important Information
Internet enabled supplies ordering for direct connect to your PC is included in the Printer Status and Alerts software. After reviewing or being alerted to your supplies status, you can order your supplies on-line.
You will need to install the Printer Status and Alerts software once on each computer for all supported HP LaserJet printers to be connected. Not all printers are supported in each software. Please read the
Some printers may experience slower performance due to the different ways that some computers and printers handle bi-directional communication of the parallel (LPT) interface. Some larger, more complex jobs may need more time to process and print due to the increased communication traffic over the parallel interface.
Download Info
Below are easy-to-follow instructions for downloading and installing the Printer Status/Alerts and Internet Enabled Supplies Ordering software.
Before proceeding with the software installation, the printer must first be properly set up, the printer drivers must already be installed, and your computer must be ready to print.
Download the file to a folder on your hard drive.
Close any screen savers, virus protection programs, or any other software programs that are running on your computer.
Go to the folder where you downloaded the software and double click the file to extract the files.
Go to the folder where these files were extracted to, for example c:\lj1079, and double click on the setup.exe file to start the installation process. During the install process you will be asked to select options for "Display status window when." We suggest you select all of the options for Printer Status/Alerts.
You only need to install this software once on each computer for all supported HP printers connected, either on the network or direct.
Open the "Printer Status and Alerts" software. We suggest you review each of the options for status and alerts and select the ones you wish to receive for your printer.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 6 Driver
Operating System
Windows NT4
Version
4.3.2.177
Language Driver
Hungarian
Size Driver
1.4MB
File Name
lj359hu.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\lj359). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\lj359).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 5e Driver
Operating System
Windows NT4
Version
4.3.2.177
Language Driver
Hungarian
Size Driver
1.4MB
File Name
lj357hu.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\lj357). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\lj357).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
HP mfp digital sending Software
Operating System
Windows NT4-2000-XP
Version
3.7.5
Language Driver
Hungarian
Size Driver
50.3MB
File Name
ljmfpdss.exe
Date
20 Jul 2004
Observations
Readme
This upgrade of the hp MFP Digital Sending Software provides digital sending support for the following products:
hp Mopier 240
hp Mopier 320
hp LaserJet 8000 MFP
hp LaserJet 8100 MFP
hp LaserJet 8150 MFP
WARNING: Do not upgrade version 2.x of the Digital Sender Module unless you have an hp MFP Digital Sending Software version 3.0 license (Secure Access or Communications). If you are upgrading a version of the Digital Sender Module version 2.x, the Send-to-Email, Send-to-Fax, and NT Authentication licenses, will be converted to 'legacy licenses' but these features will not be functional until a Digital Sending Software version 3.0 license is entered in the licensing tab.
A Secure Access license provides Send to Email and Authentication
A Communications license provides Send to Email, Authentication, and Send to Fax
hp MFP DSS license packs are available as follows:
hp DSS 3.0 - Secure Access
5 mfp license pack T1929AA (option 0AD)
10 mfp license pack T1929AA (option 0A9)
50 mfp license pack T1929AA (option 0AA)
hp DSS 3.0 - Communications
5 mfp license pack T1930AA (option 0AD)
10 mfp license pack T1930AA (option 0A9)
50 mfp license pack T1930AA (option 0AA)
IMPORTANT NOTE: These license packs are cumulative. For example, if you are upgrading version 2.x of the Digital Sender Module and have installed two email licenses, two send-to-fax licenses, and two NT-authentication licenses, and purchase a five mfp Communications license pack, the six legacy license will be upgraded to Communications licenses and the Digital Sending Software will then be able to support 11 MFPs total.
IMPORTANT NOTE: This software is compatible with all released versions of MFP firmware but there may be significant advantages in upgrading to the latest release versions of firmware.
Revision History
Current Version 3.7.5
Previous Versions3.6.6
3.5.45
3.4.7
3.0.112
Return to Top
Why Would I Need to Perform an Upgrade?
HP periodically releases a new version of the Digital Sending Software to provide defect and product enhancements. An upgrade to the digital sending software may be necessary if you determine that you will benefit from an improvement that is documented in the readmefw.txt file.
Return to Top
Determining the Current Revision Level of the Digital Sending Software
To determine the current revision level:
Go to the Start Menu.
Select Programs
Select Hewlett-Packard
Select hp MFP Digital Sending Software (or with pre 3.x software select hp Digital Sender Module)
Select the Configuration Utility
Select the 'About' tab. The revision level will be displayed on the About tab.
Return to Top
Download and Upgrade Information
Download into a temporary directory of your choice.
Run the file name to extract. Please note that this file extracts into a directory. You will have the opportunity to change the drive and directory.
You are now ready to perform the upgrade process. For a successful upgrade, these file(s) MUST be prepared per the 'Upgrade' instructions in the readmefw.txt file.
Return to Top
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Digital sending software
Operating System
Windows NT4-2000-XP
Version
3.7.5
Language Driver
Hungarian
Size Driver
50.3MB
File Name
ljmfpdss.exe
Date
20 Jul 2004
Observations
Readme
This upgrade of the HP MFP Digital Sending Software provides digital sending support for the following products:
HP Mopier 240
HP Mopier 320
HP LaserJet 8000 MFP
HP LaserJet 8100 MFP
HP LaserJet 8150 MFP
WARNING: Do not upgrade version 2.x of the Digital Sender Module unless you have an HP MFP Digital Sending Software version 3.0 license (Secure Access or Communications). If you are upgrading a version of the Digital Sender Module version 2.x, the Send-to-Email, Send-to-Fax, and NT Authentication licenses, will be converted to 'legacy licenses' but these features will not be functional until a Digital Sending Software version 3.0 license is entered in the licensing tab.
A Secure Access license provides Send to Email and Authentication
A Communications license provides Send to Email, Authentication, and Send to Fax
HP MFP DSS license packs are available as follows:
HP DSS 3.0 - Secure Access
5 mfp license pack T1929AA (option 0AD)
10 mfp license pack T1929AA (option 0A9)
50 mfp license pack T1929AA (option 0AA)
HP DSS 3.0 - Communications
5 mfp license pack T1930AA (option 0AD)
10 mfp license pack T1930AA (option 0A9)
50 mfp license pack T1930AA (option 0AA)
IMPORTANT NOTE: These license packs are cumulative. For example, if you are upgrading version 2.x of the Digital Sender Module and have installed two email licenses, two send-to-fax licenses, and two NT-authentication licenses, and purchase a five mfp Communications license pack, the six legacy license will be upgraded to Communications licenses and the Digital Sending Software will then be able to support 11 MFPs total.
IMPORTANT NOTE: This software is compatible with all released versions of MFP firmware but there may be significant advantages in upgrading to the latest release versions of firmware.
Revision History
Current Version 3.7.5
Previous Versions3.6.6
3.5.45
3.4.7
3.0.112
Return to Top
Why Would I Need to Perform an Upgrade?
HP periodically releases a new version of the Digital Sending Software to provide defect fixes and product enhancements. An upgrade to the digital sending software may be necessary if you determine that you will benefit from an improvement that is documented in the readmefw.txt file.
Return to Top
Determining the Current Revision Level of the Digital Sending Software
To determine the current revision level:
Go to the Start Menu.
Select Programs
Select Hewlett-Packard
Select HP MFP Digital Sending Software (or with pre 3.x software select HP Digital Sender Module)
Select the Configuration Utility
Select the 'About' tab. The revision level will be displayed on the About tab.
Return to Top
Download and Upgrade Information
Download into a temporary directory of your choice.
Run the file name to extract. Please note that this file extracts into a directory. You will have the opportunity to change the drive and directory.
You are now ready to perform the upgrade process. For a successful upgrade, these file(s) MUST be prepared per the 'Upgrade' instructions in the readmefw.txt file.
Return to Top
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Monochrome printing software and utility
Operating System
Mac OS 8 Mac OS 9
Version
1.5
Language Utilities
Italian
Size Driver
4.4MB
File Name
ljmonoit.sit
Date
14 Nov 2003
Observations
The HP LaserJet Installer provides HP LaserJet PostScript printing support for the Mac OS 8.6, 9.0, 9.04, 9.1, and 9.2 operating systems.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
HP LaserJet monochrome printing Software and utility
Operating System
Mac OS 8-Mac OS 9
Version
1.5
Language Utilities
Italian
Size Driver
4.4MB
File Name
ljmonoit.sit
Date
14 Nov 2003
Observations
The HP LaserJet Installer provides HP LaserJet PostScript printing support for the Mac OS 8.6, 9.0, 9.04, 9.1, and 9.2 operating systems.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
AutoCAD 10-11-12-13 HP-GL2 Driver
Operating System
MS-DOS
Version
4.5
Language Driver
Italian
Size Driver
791KB
File Name
lj131it.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Download into a temporary directory.
Run the file name to extract.
See the readme file for detailed installation instructions.
This driver supports the following HP LaserJets:
LJ240 Mopier, LJ320 Mopier
CLJ 8500, CLJ8500 N, CLJ 8500 DN
LJ8100, LJ8100 N, LJ8100 DN
LJ8000, LJ8000 N, LJ8000 DN
LJ5000, LJ5000 N, LJ5000 GN
LJ4050, LJ4050 T, LJ4050 N, LJ4050 TN
LJ4000, LJ4000 T, LJ4000 N, LJ4000 TN
LJ5, LJ5M, LJ5N, LJ5Si, LJ5SiMX, LJ5SiNX, 5Si Mopier
LJ4, LJ4M, LJ4+, LJ4M+, LJ4Si, LJ4SiMX, LJ4V, LJ4MV
LJII, LJIIID, LJIIISi
LJII,LJIID: w/GL/2cartridge
This driver does not support the following HP LaserJets
CLJ, CLJ5, CLJ5M
LJ6P, LJ6MP, LJ6L
LJ5P, LJ5MP
LJ4P, LJ4MP, LJ4L, LJ4ML
LJIIIP
LJIIP, LJIIP+
LJ2000, LJ500+, LJ, LJ+
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PostScript Driver
Operating System
OS/2
Version
30.589
Language Driver
Italian
Size Driver
805KB
File Name
lj275it.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Download into a temporary directory.
Run the file name to extract.
See the readme file for detailed installation instructions.
Supports the following LaserJets
Mopier 240, Mopier 320
LJ8000, LJ8000 N, LJ8000 DN
LJ8100, LJ8100 N, LJ8100 DN
LJ5000, LJ5000 N, LJ5000 GN
LJ4050, LJ4050 T, LJ4050 N, LJ4050 TN
LJ4000, LJ4000 T, LJ4000 N, LJ4000 TN
LJ2100, LJ2100M, LJ2100TN
CLJ, CLJ5, CLJ5M
CLJ8500, CLJ8500 N, CLJ8500 DN
CLJ4500, CLJ4500 N, CLJ4500 DN
LJ6MP
LJ5M, LJ5MP, LJ5SiMX, 5Si Mopier
LJ4M, LJ4M+, LJ4MP, LJ4ML, LJ4SiMX, LJ4MV
LJIII, LJIIIP, LJIIID, LJIIISi
*LJII, LJIID, LJIIP, LJIIP+
LJ, LJ+, LJ 500+, LJ2000
*With sufficient memory and/or PostScript Cartridge
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 6 and 5e Drivers
Operating System
OS/2
Version
30.728
Language Driver
Italian
Size Driver
1.1MB
File Name
lj273it.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Download into a temporary directory.
Run the file name to extract.
See the readme file for detailed installation instructions.
Supports the following LaserJets
Mopier 240, Mopier 320
LJ8000, LJ8000 N, LJ8000 DN
LJ5000, LJ5000 N, LJ5000 GN
LJ1100, LJ1100A
LJ2100, LJ2100M, LJ2100TN
LJ8100, LJ8100 N, LJ8100 DN
LJ4050, LJ4050 T, LJ4050 N, LJ4050 TN
LJ4000, LJ4000 T, LJ4000 N, LJ4000 TN
CLJ5, CLJ5M, CLJ
CLJ4500, CLJ4500 N, CLJ4500 DN
CLJ8500, CLJ8500 N, CLJ8500 DN
LJ6P, LJ6MP, LJ6L
LJ5, LJ5P, LJ5M, LJ5N, LJ5Si, LJ5SiMX, LJ5SiNX, 5Si Mopier
LJ4, LJ4+, LJ4M, LJ4M+, LJ4P, LJ4MP, LJ4L, LJ4ML, LJ4Si, LJ4SiMX, LJ4V, LJ4MV
LJIII, LJIIIP, LJIIID, LJIIISi
LJII, LJIID, LJIIP, LJIIP+
LJ, LJ+, LJ 500+, LJ2000
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 6 Printer Driver
Operating System
Windows 2000-XP
Version
4.3.2.138
Language Driver
Italian
Size Driver
1.5MB
File Name
lj1143it.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\ljm240). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\ljm240).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 5e Printer Driver
Operating System
Windows 2000-XP
Version
4.3..2.138
Language Driver
Italian
Size Driver
1.5MB
File Name
lj1142it.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\ljm240). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\ljm240).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
AutoCAD 12-13 HP-GL2 Driver
Operating System
Windows 3.1
Version
4.1b
Language Driver
Italian
Size Driver
1.2MB
File Name
lj132it.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Download into a temporary directory.
Run the file name to extract.
See the readme file for detailed installation instructions.
This driver supports the following HP LaserJets:
LJ240 Mopier, LJ320 Mopier
CLJ 8500, CLJ8500 N, CLJ 8500 DN
LJ8100, LJ8100 N, LJ8100 DN
LJ8000, LJ8000 N, LJ8000 DN
LJ5000, LJ5000 N, LJ5000 GN
LJ4050, LJ4050 T, LJ4050 N, LJ4050 TN
LJ4000, LJ4000 T, LJ4000 N, LJ4000 TN
LJ5, LJ5M, LJ5N, LJ5Si, LJ5SiMX, LJ5SiNX, 5Si Mopier
LJ4, LJ4M, LJ4+, LJ4M+, LJ4Si, LJ4SiMX, LJ4V, LJ4MV
LJII, LJIIID, LJIIISi
LJII,LJIID: w/GL/2cartridge
This driver does not support the following HP LaserJets
CLJ, CLJ5, CLJ5M
LJ6P, LJ6MP, LJ6L
LJ5P, LJ5MP
LJ4P, LJ4MP, LJ4L, LJ4ML
LJIIIP
LJIIP, LJIIP+
LJ2000, LJ500+, LJ, LJ+
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Resource Manager
Operating System
Windows 95-98
Version
1.2.1.2
Language Driver
Italian
Size Driver
8.7MB
File Name
lj191it.exe
Observations
HPMass Storage Resource Manager, Windows 95/98.
The HPResource Manager is a Windows 95/98 application that allows you to download, delete, and manage your printer-based fonts (PCL and Postscript) and PCL5e macros (electronic forms, overlays, letterhead etc.). The Resource Manager supports the most common network protocols (TCP/IP & IPX/SPX), as well as direct parallel port connection for greater connectivity to meet your business needs. It provides ease-of-use through an intuitive user-interface and a full, on-line help facility.
The HPResource Manager is fully compatible with the HPLaserJet 5 (excl. LaserJet 5P/5MP/5L) with C3930A/C3931A Flash SIMM's, 5Si with C2965A Disk Drive, 4000, 5000, and 8000 series printers with C4286A/C4287A Flash DIMM's or C2985A Disk Drive.
Download Info
To download into a temporary, default directory on your PC, download the file from the section below. Note the directory and path where the file is saved to. You will need to access this file on your PC.
To expand (unzip) this file; find the directory where the file was saved to. Double click on the file.
Please note that this file will create and extract into a default directory on your hard drive. You will have the opportunity to change the Drive and Directory.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Printer Status Alerts and Internet-Enabled Supplies Ordering IESO SureSupply for Direct Connect
Operating System
Windows 95-98-Me-NT4-2000-XP
Version
3.1
Language Driver
Italian
Size Driver
6.2MB
File Name
lj1079it.exe
Observations
Important Information
Internet enabled supplies ordering for direct connect to your PC is included in the Printer Status and Alerts software. After reviewing or being alerted to your supplies status, you can order your supplies on-line.
You will need to install the Printer Status and Alerts software once on each computer for all supported HP LaserJet printers to be connected. Not all printers are supported in each software. Please read the
Some printers may experience slower performance due to the different ways that some computers and printers handle bi-directional communication of the parallel (LPT) interface. Some larger, more complex jobs may need more time to process and print due to the increased communication traffic over the parallel interface.
Download Info
Below are easy-to-follow instructions for downloading and installing the Printer Status/Alerts and Internet Enabled Supplies Ordering software.
Before proceeding with the software installation, the printer must first be properly set up, the printer drivers must already be installed, and your computer must be ready to print.
Download the file to a folder on your hard drive.
Close any screen savers, virus protection programs, or any other software programs that are running on your computer.
Go to the folder where you downloaded the software and double click the file to extract the files.
Go to the folder where these files were extracted to, for example c:\lj1079, and double click on the setup.exe file to start the installation process. During the install process you will be asked to select options for "Display status window when." We suggest you select all of the options for Printer Status/Alerts.
You only need to install this software once on each computer for all supported HP printers connected, either on the network or direct.
Open the "Printer Status and Alerts" software. We suggest you review each of the options for status and alerts and select the ones you wish to receive for your printer.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 5e Driver
Operating System
Windows NT3.5
Version
3.44
Language Driver
Italian
Size Driver
198KB
File Name
lj804it.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Download into a temporary directory.
Run the file name to extract.
See the Readme file for installation instructions.
Supports the following HPPrinters
LJ8000, LJ8000 N, LJ8000 DN
LJ8100, LJ8100 N, LJ8100 DN
Mopier 240
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
AutoCAD 13-14 HP-GL2 Driver
Operating System
Windows NT3.5-NT4
Version
4.5
Language Driver
Italian
Size Driver
2.1MB
File Name
lj133it.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Download into a temporary directory.
Run the file name to extract.
See the readme file for detailed installation instructions.
This driver supports the following HP LaserJets:
LJ240 Mopier, LJ320 Mopier
CLJ 8500, CLJ8500 N, CLJ 8500 DN
LJ8100, LJ8100 N, LJ8100 DN
LJ8000, LJ8000 N, LJ8000 DN
LJ5000, LJ5000 N, LJ5000 GN
LJ4050, LJ4050 T, LJ4050 N, LJ4050 TN
LJ4000, LJ4000 T, LJ4000 N, LJ4000 TN
LJ5, LJ5M, LJ5N, LJ5Si, LJ5SiMX, LJ5SiNX, 5Si Mopier
LJ4, LJ4M, LJ4+, LJ4M+, LJ4Si, LJ4SiMX, LJ4V, LJ4MV
LJII, LJIIID, LJIIISi
LJII,LJIID: w/GL/2cartridge
This driver does not support the following HP LaserJets
CLJ, CLJ5, CLJ5M
LJ6P, LJ6MP, LJ6L
LJ5P, LJ5MP
LJ4P, LJ4MP, LJ4L, LJ4ML
LJIIIP
LJIIP, LJIIP+
LJ2000, LJ500+, LJ, LJ+
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Resource Manager
Operating System
Windows NT4
Version
1.2.1.2
Language Driver
Italian
Size Driver
8.7MB
File Name
lj192it.exe
Observations
HPMass Storage Resource Manager, Windows NT 4.0.
The HPResource Manager is a Windows NT 4.0 application that allows you to download, delete, and manage your printer-based fonts (PCL and Postscript) and PCL5e macros (electronic forms, overlays, letterhead etc.). The Resource Manager supports the most common network protocols (TCP/IP & IPX/SPX), as well as direct parallel port connection for greater connectivity to meet your business needs. It provides ease-of-use through an intuitive user-interface and a full, on-line help facility.
The HPResource Manager is fully compatible with the HPLaserJet 5 (excl. LaserJet 5P/5MP/5L) with C3930A/C3931A Flash SIMM's, 5Si with C2965A Disk Drive, 4000, 5000, and 8000 series printers with C4286A/C4287A Flash DIMM's or C2985A Disk Drive.
Download Info
To download into a temporary, default directory on your PC, download the file from the section below. Note the directory and path where the file is saved to. You will need to access this file on your PC.
To expand (unzip) this file; find the directory where the file was saved to. Double click on the file.
Please note that this file will create and extract into a default directory on your hard drive. You will have the opportunity to change the Drive and Directory.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 5e Driver
Operating System
Windows NT4
Version
4.3.2.177
Language Driver
Italian
Size Driver
1.4MB
File Name
lj357it.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\lj357). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\lj357).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 6 Driver
Operating System
Windows NT4
Version
4.3.2.177
Language Driver
Italian
Size Driver
1.4MB
File Name
lj359it.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\lj359). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\lj359).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PostScript Point and Print Bundle
Operating System
Windows NT4-2000
Version
1.0
Language Driver
Italian
Size Driver
653KB
File Name
hpmopier240_ps_it.exe
Observations
Download Info
To download into a temporary, default directory on your PC, download the file from the section below. Note the directory and path where the file is saved to. You will need to access this file on your PC.
To expand (unzip) this file; find the directory where the file was saved to. Double click on the file.
Please note that this file will create and extract into a default directory on your hard drive. You will have the opportunity to change the Drive and Directory.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Digital sending software
Operating System
Windows NT4-2000-XP
Version
3.7.5
Language Driver
Italian
Size Driver
50.3MB
File Name
ljmfpdss.exe
Date
20 Jul 2004
Observations
Readme
This upgrade of the HP MFP Digital Sending Software provides digital sending support for the following products:
HP Mopier 240
HP Mopier 320
HP LaserJet 8000 MFP
HP LaserJet 8100 MFP
HP LaserJet 8150 MFP
WARNING: Do not upgrade version 2.x of the Digital Sender Module unless you have an HP MFP Digital Sending Software version 3.0 license (Secure Access or Communications). If you are upgrading a version of the Digital Sender Module version 2.x, the Send-to-Email, Send-to-Fax, and NT Authentication licenses, will be converted to 'legacy licenses' but these features will not be functional until a Digital Sending Software version 3.0 license is entered in the licensing tab.
A Secure Access license provides Send to Email and Authentication
A Communications license provides Send to Email, Authentication, and Send to Fax
HP MFP DSS license packs are available as follows:
HP DSS 3.0 - Secure Access
5 mfp license pack T1929AA (option 0AD)
10 mfp license pack T1929AA (option 0A9)
50 mfp license pack T1929AA (option 0AA)
HP DSS 3.0 - Communications
5 mfp license pack T1930AA (option 0AD)
10 mfp license pack T1930AA (option 0A9)
50 mfp license pack T1930AA (option 0AA)
IMPORTANT NOTE: These license packs are cumulative. For example, if you are upgrading version 2.x of the Digital Sender Module and have installed two email licenses, two send-to-fax licenses, and two NT-authentication licenses, and purchase a five mfp Communications license pack, the six legacy license will be upgraded to Communications licenses and the Digital Sending Software will then be able to support 11 MFPs total.
IMPORTANT NOTE: This software is compatible with all released versions of MFP firmware but there may be significant advantages in upgrading to the latest release versions of firmware.
Revision History
Current Version 3.7.5
Previous Versions3.6.6
3.5.45
3.4.7
3.0.112
Return to Top
Why Would I Need to Perform an Upgrade?
HP periodically releases a new version of the Digital Sending Software to provide defect fixes and product enhancements. An upgrade to the digital sending software may be necessary if you determine that you will benefit from an improvement that is documented in the readmefw.txt file.
Return to Top
Determining the Current Revision Level of the Digital Sending Software
To determine the current revision level:
Go to the Start Menu.
Select Programs
Select Hewlett-Packard
Select HP MFP Digital Sending Software (or with pre 3.x software select HP Digital Sender Module)
Select the Configuration Utility
Select the 'About' tab. The revision level will be displayed on the About tab.
Return to Top
Download and Upgrade Information
Download into a temporary directory of your choice.
Run the file name to extract. Please note that this file extracts into a directory. You will have the opportunity to change the drive and directory.
You are now ready to perform the upgrade process. For a successful upgrade, these file(s) MUST be prepared per the 'Upgrade' instructions in the readmefw.txt file.
Return to Top
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
HP mfp digital sending Software
Operating System
Windows NT4-2000-XP
Version
3.7.5
Language Driver
Italian
Size Driver
50.3MB
File Name
ljmfpdss.exe
Date
20 Jul 2004
Observations
Readme
This upgrade of the hp MFP Digital Sending Software provides digital sending support for the following products:
hp Mopier 240
hp Mopier 320
hp LaserJet 8000 MFP
hp LaserJet 8100 MFP
hp LaserJet 8150 MFP
WARNING: Do not upgrade version 2.x of the Digital Sender Module unless you have an hp MFP Digital Sending Software version 3.0 license (Secure Access or Communications). If you are upgrading a version of the Digital Sender Module version 2.x, the Send-to-Email, Send-to-Fax, and NT Authentication licenses, will be converted to 'legacy licenses' but these features will not be functional until a Digital Sending Software version 3.0 license is entered in the licensing tab.
A Secure Access license provides Send to Email and Authentication
A Communications license provides Send to Email, Authentication, and Send to Fax
hp MFP DSS license packs are available as follows:
hp DSS 3.0 - Secure Access
5 mfp license pack T1929AA (option 0AD)
10 mfp license pack T1929AA (option 0A9)
50 mfp license pack T1929AA (option 0AA)
hp DSS 3.0 - Communications
5 mfp license pack T1930AA (option 0AD)
10 mfp license pack T1930AA (option 0A9)
50 mfp license pack T1930AA (option 0AA)
IMPORTANT NOTE: These license packs are cumulative. For example, if you are upgrading version 2.x of the Digital Sender Module and have installed two email licenses, two send-to-fax licenses, and two NT-authentication licenses, and purchase a five mfp Communications license pack, the six legacy license will be upgraded to Communications licenses and the Digital Sending Software will then be able to support 11 MFPs total.
IMPORTANT NOTE: This software is compatible with all released versions of MFP firmware but there may be significant advantages in upgrading to the latest release versions of firmware.
Revision History
Current Version 3.7.5
Previous Versions3.6.6
3.5.45
3.4.7
3.0.112
Return to Top
Why Would I Need to Perform an Upgrade?
HP periodically releases a new version of the Digital Sending Software to provide defect and product enhancements. An upgrade to the digital sending software may be necessary if you determine that you will benefit from an improvement that is documented in the readmefw.txt file.
Return to Top
Determining the Current Revision Level of the Digital Sending Software
To determine the current revision level:
Go to the Start Menu.
Select Programs
Select Hewlett-Packard
Select hp MFP Digital Sending Software (or with pre 3.x software select hp Digital Sender Module)
Select the Configuration Utility
Select the 'About' tab. The revision level will be displayed on the About tab.
Return to Top
Download and Upgrade Information
Download into a temporary directory of your choice.
Run the file name to extract. Please note that this file extracts into a directory. You will have the opportunity to change the drive and directory.
You are now ready to perform the upgrade process. For a successful upgrade, these file(s) MUST be prepared per the 'Upgrade' instructions in the readmefw.txt file.
Return to Top
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Monochrome printing software and utility
Operating System
Mac OS 8 Mac OS 9 Mac OS X
Version
1.31
Language Utilities
Japanese
Size Driver
5.2MB
File Name
ljmonojp.sit
Date
2 Apr 2003
Observations
The HP LaserJet Installer provides HP LaserJet PostScript printing support for the Mac OS 8.6, 9.0, 9.04, 9.1, and 9.2 operating systems.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
HP LaserJet monochrome printing Software and utility
Operating System
Mac OS 8-Mac OS 9-Mac OS X
Version
1.31
Language Utilities
Japanese
Size Driver
5.2MB
File Name
ljmonojp.sit
Date
2 Apr 2003
Observations
The HP LaserJet Installer provides HP LaserJet PostScript printing support for the Mac OS 8.6, 9.0, 9.04, 9.1, and 9.2 operating systems.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 6 Printer Driver
Operating System
Windows 2000-XP
Version
4.3.2.138
Language Driver
Japanese
Size Driver
1.5MB
File Name
lj1143jp.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\ljm240). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\ljm240).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
AutoCAD 12-13 HP-GL2 Driver
Operating System
Windows 3.1
Version
4.1b
Language Driver
Japanese
Size Driver
1.2MB
File Name
lj132jp.exe
Observations
Download Info
To download into a temporary, default directory on your PC, download the file from the section below. Note the directory and path where the file is saved to. You will need to access this file on your PC.
To expand (unzip) this file; find the directory where the file was saved to. Double click on the file.
Please note that this file will create and extract into a default directory on your hard drive. You will have the opportunity to change the Drive and Directory.
This driver supports the following HPLaserJets:
LJ240 Mopier, LJ320 Mopier
CLJ 8550, CLJ8550 N, CLJ 8550 DN, CLJ8550 GN, CLJ8550 MFP
CLJ 8500, CLJ8500 N, CLJ 8500 DN
LJ8150, LJ8150 N, LJ8150 DN, LJ8150 HN
LJ8100, LJ8100 N, LJ8100 DN
LJ8000, LJ8000 N, LJ8000 DN
LJ5000, LJ5000 N, LJ5000 GN
LJ4050, LJ4050 T, LJ4050 N, LJ4050 TN
LJ4000, LJ4000 T, LJ4000 N, LJ4000 TN
LJ5, LJ5M, LJ5N, LJ5Si, LJ5SiMX, LJ5SiNX, 5Si Mopier
LJ4, LJ4M, LJ4+, LJ4M+, LJ4Si, LJ4SiMX, LJ4V, LJ4MV
LJII, LJIIID, LJIIISi
LJII,LJIID: w/GL/2cartridge
This driver does not support the following HPLaserJets
CLJ, CLJ5, CLJ5M
LJ6P, LJ6MP, LJ6L
LJ5P, LJ5MP
LJ4P, LJ4MP, LJ4L, LJ4ML
LJIIIP
LJIIP, LJIIP+
LJ2000, LJ500+, LJ, LJ+
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Resource Manager
Operating System
Windows 95-98
Version
1.2.1.2
Language Driver
Japanese
Size Driver
8.5MB
File Name
lj191jp.exe
Observations
HPMass Storage Resource Manager, Windows 95/98.
The HPResource Manager is a Windows 95/98 application that allows you to download, delete, and manage your printer-based fonts (PCL and Postscript) and PCL5e macros (electronic forms, overlays, letterhead etc.). The Resource Manager supports the most common network protocols (TCP/IP & IPX/SPX), as well as direct parallel port connection for greater connectivity to meet your business needs. It provides ease-of-use through an intuitive user-interface and a full, on-line help facility.
The HPResource Manager is fully compatible with the HPLaserJet 5 (excl. LaserJet 5P/5MP/5L) with C3930A/C3931A Flash SIMM's, 5Si with C2965A Disk Drive, 4000, 5000, and 8000 series printers with C4286A/C4287A Flash DIMM's or C2985A Disk Drive.
Download Info
To download into a temporary, default directory on your PC, download the file from the section below. Note the directory and path where the file is saved to. You will need to access this file on your PC.
To expand (unzip) this file; find the directory where the file was saved to. Double click on the file.
Please note that this file will create and extract into a default directory on your hard drive. You will have the opportunity to change the Drive and Directory.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Printer Status Alerts and Internet-Enabled Supplies Ordering IESO SureSupply for Direct Connect
Operating System
Windows 95-98-Me-NT4-2000-XP
Version
3.1
Language Driver
Japanese
Size Driver
6.2MB
File Name
lj1079jp.exe
Observations
Important Information
Internet enabled supplies ordering for direct connect to your PC is included in the Printer Status and Alerts software. After reviewing or being alerted to your supplies status, you can order your supplies on-line.
You will need to install the Printer Status and Alerts software once on each computer for all supported HP LaserJet printers to be connected. Not all printers are supported in each software. Please read the
Some printers may experience slower performance due to the different ways that some computers and printers handle bi-directional communication of the parallel (LPT) interface. Some larger, more complex jobs may need more time to process and print due to the increased communication traffic over the parallel interface.
Download Info
Below are easy-to-follow instructions for downloading and installing the Printer Status/Alerts and Internet Enabled Supplies Ordering software.
Before proceeding with the software installation, the printer must first be properly set up, the printer drivers must already be installed, and your computer must be ready to print.
Download the file to a folder on your hard drive.
Close any screen savers, virus protection programs, or any other software programs that are running on your computer.
Go to the folder where you downloaded the software and double click the file to extract the files.
Go to the folder where these files were extracted to, for example c:\lj1079, and double click on the setup.exe file to start the installation process. During the install process you will be asked to select options for "Display status window when." We suggest you select all of the options for Printer Status/Alerts.
You only need to install this software once on each computer for all supported HP printers connected, either on the network or direct.
Open the "Printer Status and Alerts" software. We suggest you review each of the options for status and alerts and select the ones you wish to receive for your printer.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
AutoCAD 13-14 HP-GL2 Driver
Operating System
Windows NT3.5-NT4
Version
4.5
Language Driver
Japanese
Size Driver
1.3MB
File Name
lj133jp.exe
Observations
HPLaserJet AutoCAD 13/14 HP-GL/2 Driver
Download Info
To download into a temporary, default directory on your PC, download the file from the section below. Note the directory and path where the file is saved to. You will need to access this file on your PC.
To expand (unzip) this file; find the directory where the file was saved to. Double click on the file.
Please note that this file will create and extract into a default directory on your hard drive. You will have the opportunity to change the Drive and Directory.
This driver supports the following HPLaserJets:
LJ240 Mopier, LJ320 Mopier
CLJ 8550, CLJ8550 N, CLJ 8550 DN, CLJ8550 GN, CLJ8550 MFP
CLJ 8500, CLJ8500 N, CLJ 8500 DN
LJ8150, LJ8150 N, LJ8150 DN, LJ8150 HN
LJ8100, LJ8100 N, LJ8100 DN
LJ8000, LJ8000 N, LJ8000 DN
LJ5000, LJ5000 N, LJ5000 GN
LJ4050, LJ4050 T, LJ4050 N, LJ4050 TN
LJ4000, LJ4000 T, LJ4000 N, LJ4000 TN
LJ5, LJ5M, LJ5N, LJ5Si, LJ5SiMX, LJ5SiNX, 5Si Mopier
LJ4, LJ4M, LJ4+, LJ4M+, LJ4Si, LJ4SiMX, LJ4V, LJ4MV
LJIlI, LJIIID, LJIIISi
LJII,LJIID: w/GL/2cartridge
This driver does not support the following HPLaserJets
CLJ, CLJ5, CLJ5M
LJ6P, LJ6MP, LJ6L
LJ5P, LJ5MP
LJ4P, LJ4MP, LJ4L, LJ4ML
LJIIIP
LJIIP, LJIIP+
LJ2000, LJ500+, LJ, LJ+
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Resource Manager
Operating System
Windows NT4
Version
1.2.1.2
Language Driver
Japanese
Size Driver
8.4MB
File Name
lj192jp.exe
Observations
HPMass Storage Resource Manager, Windows NT 4.0.
The HPResource Manager is a Windows NT 4.0 application that allows you to download, delete, and manage your printer-based fonts (PCL and Postscript) and PCL5e macros (electronic forms, overlays, letterhead etc.). The Resource Manager supports the most common network protocols (TCP/IP & IPX/SPX), as well as direct parallel port connection for greater connectivity to meet your business needs. It provides ease-of-use through an intuitive user-interface and a full, on-line help facility.
The HPResource Manager is fully compatible with the HPLaserJet 5 (excl. LaserJet 5P/5MP/5L) with C3930A/C3931A Flash SIMM's, 5Si with C2965A Disk Drive, 4000, 5000, and 8000 series printers with C4286A/C4287A Flash DIMM's or C2985A Disk Drive.
Download Info
To download into a temporary, default directory on your PC, download the file from the section below. Note the directory and path where the file is saved to. You will need to access this file on your PC.
To expand (unzip) this file; find the directory where the file was saved to. Double click on the file.
Please note that this file will create and extract into a default directory on your hard drive. You will have the opportunity to change the Drive and Directory.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 6 Driver
Operating System
Windows NT4-2000
Version
4.3.2.177
Language Driver
Japanese
Size Driver
1.4MB
File Name
lj359jp.exe
Observations
Mopier 240 PCL6 Driver Update for Windows NT and Windows 2000
UI Fixes
The previous version allowed fields with garbage or fields that were blank to be shown on "QuickSet," "WaterMark," and "PaperType" fields.
Enhancements
Enabled rotation of portrait pages. Previously, the "rotated" option was only active when the page orientation was set to Landscape. The "rotated" option is now available in portrait orientation.
Changed the label of the "Print Colors As" option to "Print All Text As Black" and moved this setting to the Print Quality Details dialog, where it made more sense.
Enhanced the Watermark functionality to allow for choosing among more shades of a selected color.
Defect Fixes
Fixed a defect that caused the spooler to crash when installing the driver under Windows 2000.
Fixed a defect that caused an operating systems crash under Windows 2000 Terminal Services environment when printing Kanji characters.
Added Passthrough functionality to support MS Word Print Field commands and other applications that require this feature.
Released drivers for 13 different languages.
Download Info
Below are easy-to-follow instructions for downloading and installing printer drivers.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then the computer.
Close any screen savers, virus protection programs or other software programs that are running on your computer.
Download the file to your hard drive and then run the Add Printer Wizard.
Running the downloaded file will extract all the driver files into a directory on your hard drive.
You will have an opportunity to change the drive and directory.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Monochrome printing software and utility
Operating System
Mac OS 8 Mac OS 9
Version
1.31
Language Utilities
Korean
Size Driver
5.2MB
File Name
ljmonoko.sit
Date
2 Apr 2003
Observations
The HP LaserJet Installer provides HP LaserJet PostScript printing support for the Mac OS 8.6, 9.0, 9.04, 9.1, and 9.2 operating systems.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
HP LaserJet monochrome printing Software and utility
Operating System
Mac OS 8-Mac OS 9
Version
1.31
Language Utilities
Korean
Size Driver
5.2MB
File Name
ljmonoko.sit
Date
2 Apr 2003
Observations
The HP LaserJet Installer provides HP LaserJet PostScript printing support for the Mac OS 8.6, 9.0, 9.04, 9.1, and 9.2 operating systems.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
AutoCAD 10-11-12-13 HP-GL2 Driver
Operating System
MS-DOS
Version
4.5
Language Driver
Korean
Size Driver
775KB
File Name
lj131ko.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Download into a temporary directory.
Run the file name to extract.
See the readme file for detailed installation instructions.
This driver supports the following HP LaserJets:
LJ240 Mopier, LJ320 Mopier
CLJ 8500, CLJ8500 N, CLJ 8500 DN
LJ8100, LJ8100 N, LJ8100 DN
LJ8000, LJ8000 N, LJ8000 DN
LJ5000, LJ5000 N, LJ5000 GN
LJ4050, LJ4050 T, LJ4050 N, LJ4050 TN
LJ4000, LJ4000 T, LJ4000 N, LJ4000 TN
LJ5, LJ5M, LJ5N, LJ5Si, LJ5SiMX, LJ5SiNX, 5Si Mopier
LJ4, LJ4M, LJ4+, LJ4M+, LJ4Si, LJ4SiMX, LJ4V, LJ4MV
LJII, LJIIID, LJIIISi
LJII,LJIID: w/GL/2cartridge
This driver does not support the following HP LaserJets
CLJ, CLJ5, CLJ5M
LJ6P, LJ6MP, LJ6L
LJ5P, LJ5MP
LJ4P, LJ4MP, LJ4L, LJ4ML
LJIIIP
LJIIP, LJIIP+
LJ2000, LJ500+, LJ, LJ+
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PostScript Driver
Operating System
OS/2
Version
30.589
Language Driver
Korean
Size Driver
807KB
File Name
lj275ko.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Download into a temporary directory.
Run the file name to extract.
See the readme file for detailed installation instructions.
Supports the following LaserJets
Mopier 240, Mopier 320
LJ8000, LJ8000 N, LJ8000 DN
LJ8100, LJ8100 N, LJ8100 DN
LJ5000, LJ5000 N, LJ5000 GN
LJ4050, LJ4050 T, LJ4050 N, LJ4050 TN
LJ4000, LJ4000 T, LJ4000 N, LJ4000 TN
LJ2100, LJ2100M, LJ2100TN
CLJ, CLJ5, CLJ5M
CLJ8500, CLJ8500 N, CLJ8500 DN
CLJ4500, CLJ4500 N, CLJ4500 DN
LJ6MP
LJ5M, LJ5MP, LJ5SiMX, 5Si Mopier
LJ4M, LJ4M+, LJ4MP, LJ4ML, LJ4SiMX, LJ4MV
LJIII, LJIIIP, LJIIID, LJIIISi
*LJII, LJIID, LJIIP, LJIIP+
LJ, LJ+, LJ 500+, LJ2000
*With sufficient memory and/or PostScript Cartridge
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 6 and 5e Drivers
Operating System
OS/2
Version
30.728
Language Driver
Korean
Size Driver
1.1MB
File Name
lj273ko.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Download into a temporary directory.
Run the file name to extract.
See the readme file for detailed installation instructions.
Supports the following LaserJets
Mopier 240, Mopier 320
LJ8000, LJ8000 N, LJ8000 DN
LJ5000, LJ5000 N, LJ5000 GN
LJ1100, LJ1100A
LJ2100, LJ2100M, LJ2100TN
LJ8100, LJ8100 N, LJ8100 DN
LJ4050, LJ4050 T, LJ4050 N, LJ4050 TN
LJ4000, LJ4000 T, LJ4000 N, LJ4000 TN
CLJ5, CLJ5M, CLJ
CLJ4500, CLJ4500 N, CLJ4500 DN
CLJ8500, CLJ8500 N, CLJ8500 DN
LJ6P, LJ6MP, LJ6L
LJ5, LJ5P, LJ5M, LJ5N, LJ5Si, LJ5SiMX, LJ5SiNX, 5Si Mopier
LJ4, LJ4+, LJ4M, LJ4M+, LJ4P, LJ4MP, LJ4L, LJ4ML, LJ4Si, LJ4SiMX, LJ4V, LJ4MV
LJIII, LJIIIP, LJIIID, LJIIISi
LJII, LJIID, LJIIP, LJIIP+
LJ, LJ+, LJ 500+, LJ2000
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 6 Printer Driver
Operating System
Windows 2000-XP
Version
4.3.2.138
Language Driver
Korean
Size Driver
1.5MB
File Name
lj1143ko.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\ljm240). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\ljm240).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
AutoCAD 12-13 HP-GL2 Driver
Operating System
Windows 3.1
Version
4.1b
Language Driver
Korean
Size Driver
1.1MB
File Name
lj132ko.exe
Observations
Download Info
To download into a temporary, default directory on your PC, download the file from the section below. Note the directory and path where the file is saved to. You will need to access this file on your PC.
To expand (unzip) this file; find the directory where the file was saved to. Double click on the file.
Please note that this file will create and extract into a default directory on your hard drive. You will have the opportunity to change the Drive and Directory.
This driver supports the following HPLaserJets:
LJ240 Mopier, LJ320 Mopier
CLJ 8550, CLJ8550 N, CLJ 8550 DN, CLJ8550 GN, CLJ8550 MFP
CLJ 8500, CLJ8500 N, CLJ 8500 DN
LJ8150, LJ8150 N, LJ8150 DN, LJ8150 HN
LJ8100, LJ8100 N, LJ8100 DN
LJ8000, LJ8000 N, LJ8000 DN
LJ5000, LJ5000 N, LJ5000 GN
LJ4050, LJ4050 T, LJ4050 N, LJ4050 TN
LJ4000, LJ4000 T, LJ4000 N, LJ4000 TN
LJ5, LJ5M, LJ5N, LJ5Si, LJ5SiMX, LJ5SiNX, 5Si Mopier
LJ4, LJ4M, LJ4+, LJ4M+, LJ4Si, LJ4SiMX, LJ4V, LJ4MV
LJII, LJIIID, LJIIISi
LJII,LJIID: w/GL/2cartridge
This driver does not support the following HPLaserJets
CLJ, CLJ5, CLJ5M
LJ6P, LJ6MP, LJ6L
LJ5P, LJ5MP
LJ4P, LJ4MP, LJ4L, LJ4ML
LJIIIP
LJIIP, LJIIP+
LJ2000, LJ500+, LJ, LJ+
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Resource Manager
Operating System
Windows 95-98
Version
1.2.1.2
Language Driver
Korean
Size Driver
8.6MB
File Name
lj191ko.exe
Observations
HPMass Storage Resource Manager, Windows 95/98.
The HPResource Manager is a Windows 95/98 application that allows you to download, delete, and manage your printer-based fonts (PCL and Postscript) and PCL5e macros (electronic forms, overlays, letterhead etc.). The Resource Manager supports the most common network protocols (TCP/IP & IPX/SPX), as well as direct parallel port connection for greater connectivity to meet your business needs. It provides ease-of-use through an intuitive user-interface and a full, on-line help facility.
The HPResource Manager is fully compatible with the HPLaserJet 5 (excl. LaserJet 5P/5MP/5L) with C3930A/C3931A Flash SIMM's, 5Si with C2965A Disk Drive, 4000, 5000, and 8000 series printers with C4286A/C4287A Flash DIMM's or C2985A Disk Drive.
Download Info
To download into a temporary, default directory on your PC, download the file from the section below. Note the directory and path where the file is saved to. You will need to access this file on your PC.
To expand (unzip) this file; find the directory where the file was saved to. Double click on the file.
Please note that this file will create and extract into a default directory on your hard drive. You will have the opportunity to change the Drive and Directory.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Printer Status Alerts and Internet-Enabled Supplies Ordering IESO SureSupply for Direct Connect
Operating System
Windows 95-98-Me-NT4-2000-XP
Version
3.1
Language Driver
Korean
Size Driver
6.2MB
File Name
lj1079ko.exe
Observations
Important Information
Internet enabled supplies ordering for direct connect to your PC is included in the Printer Status and Alerts software. After reviewing or being alerted to your supplies status, you can order your supplies on-line.
You will need to install the Printer Status and Alerts software once on each computer for all supported HP LaserJet printers to be connected. Not all printers are supported in each software. Please read the
Some printers may experience slower performance due to the different ways that some computers and printers handle bi-directional communication of the parallel (LPT) interface. Some larger, more complex jobs may need more time to process and print due to the increased communication traffic over the parallel interface.
Download Info
Below are easy-to-follow instructions for downloading and installing the Printer Status/Alerts and Internet Enabled Supplies Ordering software.
Before proceeding with the software installation, the printer must first be properly set up, the printer drivers must already be installed, and your computer must be ready to print.
Download the file to a folder on your hard drive.
Close any screen savers, virus protection programs, or any other software programs that are running on your computer.
Go to the folder where you downloaded the software and double click the file to extract the files.
Go to the folder where these files were extracted to, for example c:\lj1079, and double click on the setup.exe file to start the installation process. During the install process you will be asked to select options for "Display status window when." We suggest you select all of the options for Printer Status/Alerts.
You only need to install this software once on each computer for all supported HP printers connected, either on the network or direct.
Open the "Printer Status and Alerts" software. We suggest you review each of the options for status and alerts and select the ones you wish to receive for your printer.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
AutoCAD 13-14 HP-GL2 Driver
Operating System
Windows NT3.5-NT4
Version
4.5
Language Driver
Korean
Size Driver
1.2MB
File Name
lj133ko.exe
Observations
HPLaserJet AutoCAD 13/14 HP-GL/2 Driver
Download Info
To download into a temporary, default directory on your PC, download the file from the section below. Note the directory and path where the file is saved to. You will need to access this file on your PC.
To expand (unzip) this file; find the directory where the file was saved to. Double click on the file.
Please note that this file will create and extract into a default directory on your hard drive. You will have the opportunity to change the Drive and Directory.
This driver supports the following HPLaserJets:
LJ240 Mopier, LJ320 Mopier
CLJ 8550, CLJ8550 N, CLJ 8550 DN, CLJ8550 GN, CLJ8550 MFP
CLJ 8500, CLJ8500 N, CLJ 8500 DN
LJ8150, LJ8150 N, LJ8150 DN, LJ8150 HN
LJ8100, LJ8100 N, LJ8100 DN
LJ8000, LJ8000 N, LJ8000 DN
LJ5000, LJ5000 N, LJ5000 GN
LJ4050, LJ4050 T, LJ4050 N, LJ4050 TN
LJ4000, LJ4000 T, LJ4000 N, LJ4000 TN
LJ5, LJ5M, LJ5N, LJ5Si, LJ5SiMX, LJ5SiNX, 5Si Mopier
LJ4, LJ4M, LJ4+, LJ4M+, LJ4Si, LJ4SiMX, LJ4V, LJ4MV
LJIlI, LJIIID, LJIIISi
LJII,LJIID: w/GL/2cartridge
This driver does not support the following HPLaserJets
CLJ, CLJ5, CLJ5M
LJ6P, LJ6MP, LJ6L
LJ5P, LJ5MP
LJ4P, LJ4MP, LJ4L, LJ4ML
LJIIIP
LJIIP, LJIIP+
LJ2000, LJ500+, LJ, LJ+
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Resource Manager
Operating System
Windows NT4
Version
1.2.1.2
Language Driver
Korean
Size Driver
8.5MB
File Name
lj192ko.exe
Observations
HPMass Storage Resource Manager, Windows NT 4.0.
The HPResource Manager is a Windows NT 4.0 application that allows you to download, delete, and manage your printer-based fonts (PCL and Postscript) and PCL5e macros (electronic forms, overlays, letterhead etc.). The Resource Manager supports the most common network protocols (TCP/IP & IPX/SPX), as well as direct parallel port connection for greater connectivity to meet your business needs. It provides ease-of-use through an intuitive user-interface and a full, on-line help facility.
The HPResource Manager is fully compatible with the HPLaserJet 5 (excl. LaserJet 5P/5MP/5L) with C3930A/C3931A Flash SIMM's, 5Si with C2965A Disk Drive, 4000, 5000, and 8000 series printers with C4286A/C4287A Flash DIMM's or C2985A Disk Drive.
Download Info
To download into a temporary, default directory on your PC, download the file from the section below. Note the directory and path where the file is saved to. You will need to access this file on your PC.
To expand (unzip) this file; find the directory where the file was saved to. Double click on the file.
Please note that this file will create and extract into a default directory on your hard drive. You will have the opportunity to change the Drive and Directory.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 6 Driver
Operating System
Windows NT4-2000
Version
4.3.2.177
Language Driver
Korean
Size Driver
1.4MB
File Name
lj359ko.exe
Observations
Mopier 240 PCL6 Driver Update for Windows NT and Windows 2000
UI Fixes
The previous version allowed fields with garbage or fields that were blank to be shown on "QuickSet," "WaterMark," and "PaperType" fields.
Enhancements
Enabled rotation of portrait pages. Previously, the "rotated" option was only active when the page orientation was set to Landscape. The "rotated" option is now available in portrait orientation.
Changed the label of the "Print Colors As" option to "Print All Text As Black" and moved this setting to the Print Quality Details dialog, where it made more sense.
Enhanced the Watermark functionality to allow for choosing among more shades of a selected color.
Defect Fixes
Fixed a defect that caused the spooler to crash when installing the driver under Windows 2000.
Fixed a defect that caused an operating systems crash under Windows 2000 Terminal Services environment when printing Kanji characters.
Added Passthrough functionality to support MS Word Print Field commands and other applications that require this feature.
Released drivers for 13 different languages.
Download Info
Below are easy-to-follow instructions for downloading and installing printer drivers.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then the computer.
Close any screen savers, virus protection programs or other software programs that are running on your computer.
Download the file to your hard drive and then run the Add Printer Wizard.
Running the downloaded file will extract all the driver files into a directory on your hard drive.
You will have an opportunity to change the drive and directory.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Monochrome printing software and utility
Operating System
Mac OS 8 Mac OS 9
Version
1.5
Language Utilities
Norwegian
Size Driver
4.4MB
File Name
ljmonono.sit
Date
14 Nov 2003
Observations
The HP LaserJet Installer provides HP LaserJet PostScript printing support for the Mac OS 8.6, 9.0, 9.04, 9.1, and 9.2 operating systems.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
HP LaserJet monochrome printing Software and utility
Operating System
Mac OS 8-Mac OS 9
Version
1.5
Language Utilities
Norwegian
Size Driver
4.4MB
File Name
ljmonono.sit
Date
14 Nov 2003
Observations
The HP LaserJet Installer provides HP LaserJet PostScript printing support for the Mac OS 8.6, 9.0, 9.04, 9.1, and 9.2 operating systems.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 6 and 5e Drivers
Operating System
OS/2
Version
30.728
Language Driver
Norwegian
Size Driver
1.1MB
File Name
lj273no.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Download into a temporary directory.
Run the file name to extract.
See the readme file for detailed installation instructions.
Supports the following LaserJets
Mopier 240, Mopier 320
LJ8000, LJ8000 N, LJ8000 DN
LJ5000, LJ5000 N, LJ5000 GN
LJ1100, LJ1100A
LJ2100, LJ2100M, LJ2100TN
LJ8100, LJ8100 N, LJ8100 DN
LJ4050, LJ4050 T, LJ4050 N, LJ4050 TN
LJ4000, LJ4000 T, LJ4000 N, LJ4000 TN
CLJ5, CLJ5M, CLJ
CLJ4500, CLJ4500 N, CLJ4500 DN
CLJ8500, CLJ8500 N, CLJ8500 DN
LJ6P, LJ6MP, LJ6L
LJ5, LJ5P, LJ5M, LJ5N, LJ5Si, LJ5SiMX, LJ5SiNX, 5Si Mopier
LJ4, LJ4+, LJ4M, LJ4M+, LJ4P, LJ4MP, LJ4L, LJ4ML, LJ4Si, LJ4SiMX, LJ4V, LJ4MV
LJIII, LJIIIP, LJIIID, LJIIISi
LJII, LJIID, LJIIP, LJIIP+
LJ, LJ+, LJ 500+, LJ2000
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PostScript Driver
Operating System
OS/2
Version
30.589
Language Driver
Norwegian
Size Driver
802KB
File Name
lj275no.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Download into a temporary directory.
Run the file name to extract.
See the readme file for detailed installation instructions.
Supports the following LaserJets
Mopier 240, Mopier 320
LJ8000, LJ8000 N, LJ8000 DN
LJ8100, LJ8100 N, LJ8100 DN
LJ5000, LJ5000 N, LJ5000 GN
LJ4050, LJ4050 T, LJ4050 N, LJ4050 TN
LJ4000, LJ4000 T, LJ4000 N, LJ4000 TN
LJ2100, LJ2100M, LJ2100TN
CLJ, CLJ5, CLJ5M
CLJ8500, CLJ8500 N, CLJ8500 DN
CLJ4500, CLJ4500 N, CLJ4500 DN
LJ6MP
LJ5M, LJ5MP, LJ5SiMX, 5Si Mopier
LJ4M, LJ4M+, LJ4MP, LJ4ML, LJ4SiMX, LJ4MV
LJIII, LJIIIP, LJIIID, LJIIISi
*LJII, LJIID, LJIIP, LJIIP+
LJ, LJ+, LJ 500+, LJ2000
*With sufficient memory and/or PostScript Cartridge
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 5e Printer Driver
Operating System
Windows 2000-XP
Version
4.3..2.138
Language Driver
Norwegian
Size Driver
1.5MB
File Name
lj1142no.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\ljm240). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\ljm240).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 6 Printer Driver
Operating System
Windows 2000-XP
Version
4.3.2.138
Language Driver
Norwegian
Size Driver
1.5MB
File Name
lj1143no.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\ljm240). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\ljm240).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Printer Status Alerts and Internet-Enabled Supplies Ordering IESO SureSupply for Direct Connect
Operating System
Windows 95-98-Me-NT4-2000-XP
Version
3.1
Language Driver
Norwegian
Size Driver
6.2MB
File Name
lj1079no.exe
Observations
Important Information
Internet enabled supplies ordering for direct connect to your PC is included in the Printer Status and Alerts software. After reviewing or being alerted to your supplies status, you can order your supplies on-line.
You will need to install the Printer Status and Alerts software once on each computer for all supported HP LaserJet printers to be connected. Not all printers are supported in each software. Please read the
Some printers may experience slower performance due to the different ways that some computers and printers handle bi-directional communication of the parallel (LPT) interface. Some larger, more complex jobs may need more time to process and print due to the increased communication traffic over the parallel interface.
Download Info
Below are easy-to-follow instructions for downloading and installing the Printer Status/Alerts and Internet Enabled Supplies Ordering software.
Before proceeding with the software installation, the printer must first be properly set up, the printer drivers must already be installed, and your computer must be ready to print.
Download the file to a folder on your hard drive.
Close any screen savers, virus protection programs, or any other software programs that are running on your computer.
Go to the folder where you downloaded the software and double click the file to extract the files.
Go to the folder where these files were extracted to, for example c:\lj1079, and double click on the setup.exe file to start the installation process. During the install process you will be asked to select options for "Display status window when." We suggest you select all of the options for Printer Status/Alerts.
You only need to install this software once on each computer for all supported HP printers connected, either on the network or direct.
Open the "Printer Status and Alerts" software. We suggest you review each of the options for status and alerts and select the ones you wish to receive for your printer.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 5e Driver
Operating System
Windows NT3.5
Version
3.44
Language Driver
Norwegian
Size Driver
195KB
File Name
lj804no.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Download into a temporary directory.
Run the file name to extract.
See the Readme file for installation instructions.
Supports the following HPPrinters
LJ8000, LJ8000 N, LJ8000 DN
LJ8100, LJ8100 N, LJ8100 DN
Mopier 240
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 5e Driver
Operating System
Windows NT4
Version
4.3.2.177
Language Driver
Norwegian
Size Driver
1.4MB
File Name
lj357no.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\lj357). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\lj357).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 6 Driver
Operating System
Windows NT4
Version
4.3.2.177
Language Driver
Norwegian
Size Driver
1.4MB
File Name
lj359no.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\lj359). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\lj359).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PostScript Point and Print Bundle
Operating System
Windows NT4-2000
Version
1.0
Language Driver
Norwegian
Size Driver
652KB
File Name
hpmopier240_ps_no.exe
Observations
Download Info
This option allows you to download a single file that contains the entire Product Software.
To download into a temporary, default directory on your PC, download the file. Note the directory and path where the file is saved to. You will need to access this file on your PC.
To expand (unzip) this file; find the directory where the file was saved to. Double click on the file.
Please note that this file will create and extract into a default directory on your hard drive. You will have the opportunity to change the Drive and Directory.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
HP mfp digital sending Software
Operating System
Windows NT4-2000-XP
Version
3.7.5
Language Driver
Norwegian
Size Driver
50.3MB
File Name
ljmfpdss.exe
Date
20 Jul 2004
Observations
Readme
This upgrade of the hp MFP Digital Sending Software provides digital sending support for the following products:
hp Mopier 240
hp Mopier 320
hp LaserJet 8000 MFP
hp LaserJet 8100 MFP
hp LaserJet 8150 MFP
WARNING: Do not upgrade version 2.x of the Digital Sender Module unless you have an hp MFP Digital Sending Software version 3.0 license (Secure Access or Communications). If you are upgrading a version of the Digital Sender Module version 2.x, the Send-to-Email, Send-to-Fax, and NT Authentication licenses, will be converted to 'legacy licenses' but these features will not be functional until a Digital Sending Software version 3.0 license is entered in the licensing tab.
A Secure Access license provides Send to Email and Authentication
A Communications license provides Send to Email, Authentication, and Send to Fax
hp MFP DSS license packs are available as follows:
hp DSS 3.0 - Secure Access
5 mfp license pack T1929AA (option 0AD)
10 mfp license pack T1929AA (option 0A9)
50 mfp license pack T1929AA (option 0AA)
hp DSS 3.0 - Communications
5 mfp license pack T1930AA (option 0AD)
10 mfp license pack T1930AA (option 0A9)
50 mfp license pack T1930AA (option 0AA)
IMPORTANT NOTE: These license packs are cumulative. For example, if you are upgrading version 2.x of the Digital Sender Module and have installed two email licenses, two send-to-fax licenses, and two NT-authentication licenses, and purchase a five mfp Communications license pack, the six legacy license will be upgraded to Communications licenses and the Digital Sending Software will then be able to support 11 MFPs total.
IMPORTANT NOTE: This software is compatible with all released versions of MFP firmware but there may be significant advantages in upgrading to the latest release versions of firmware.
Revision History
Current Version 3.7.5
Previous Versions3.6.6
3.5.45
3.4.7
3.0.112
Return to Top
Why Would I Need to Perform an Upgrade?
HP periodically releases a new version of the Digital Sending Software to provide defect and product enhancements. An upgrade to the digital sending software may be necessary if you determine that you will benefit from an improvement that is documented in the readmefw.txt file.
Return to Top
Determining the Current Revision Level of the Digital Sending Software
To determine the current revision level:
Go to the Start Menu.
Select Programs
Select Hewlett-Packard
Select hp MFP Digital Sending Software (or with pre 3.x software select hp Digital Sender Module)
Select the Configuration Utility
Select the 'About' tab. The revision level will be displayed on the About tab.
Return to Top
Download and Upgrade Information
Download into a temporary directory of your choice.
Run the file name to extract. Please note that this file extracts into a directory. You will have the opportunity to change the drive and directory.
You are now ready to perform the upgrade process. For a successful upgrade, these file(s) MUST be prepared per the 'Upgrade' instructions in the readmefw.txt file.
Return to Top
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Digital sending software
Operating System
Windows NT4-2000-XP
Version
3.7.5
Language Driver
Norwegian
Size Driver
50.3MB
File Name
ljmfpdss.exe
Date
20 Jul 2004
Observations
Readme
This upgrade of the HP MFP Digital Sending Software provides digital sending support for the following products:
HP Mopier 240
HP Mopier 320
HP LaserJet 8000 MFP
HP LaserJet 8100 MFP
HP LaserJet 8150 MFP
WARNING: Do not upgrade version 2.x of the Digital Sender Module unless you have an HP MFP Digital Sending Software version 3.0 license (Secure Access or Communications). If you are upgrading a version of the Digital Sender Module version 2.x, the Send-to-Email, Send-to-Fax, and NT Authentication licenses, will be converted to 'legacy licenses' but these features will not be functional until a Digital Sending Software version 3.0 license is entered in the licensing tab.
A Secure Access license provides Send to Email and Authentication
A Communications license provides Send to Email, Authentication, and Send to Fax
HP MFP DSS license packs are available as follows:
HP DSS 3.0 - Secure Access
5 mfp license pack T1929AA (option 0AD)
10 mfp license pack T1929AA (option 0A9)
50 mfp license pack T1929AA (option 0AA)
HP DSS 3.0 - Communications
5 mfp license pack T1930AA (option 0AD)
10 mfp license pack T1930AA (option 0A9)
50 mfp license pack T1930AA (option 0AA)
IMPORTANT NOTE: These license packs are cumulative. For example, if you are upgrading version 2.x of the Digital Sender Module and have installed two email licenses, two send-to-fax licenses, and two NT-authentication licenses, and purchase a five mfp Communications license pack, the six legacy license will be upgraded to Communications licenses and the Digital Sending Software will then be able to support 11 MFPs total.
IMPORTANT NOTE: This software is compatible with all released versions of MFP firmware but there may be significant advantages in upgrading to the latest release versions of firmware.
Revision History
Current Version 3.7.5
Previous Versions3.6.6
3.5.45
3.4.7
3.0.112
Return to Top
Why Would I Need to Perform an Upgrade?
HP periodically releases a new version of the Digital Sending Software to provide defect fixes and product enhancements. An upgrade to the digital sending software may be necessary if you determine that you will benefit from an improvement that is documented in the readmefw.txt file.
Return to Top
Determining the Current Revision Level of the Digital Sending Software
To determine the current revision level:
Go to the Start Menu.
Select Programs
Select Hewlett-Packard
Select HP MFP Digital Sending Software (or with pre 3.x software select HP Digital Sender Module)
Select the Configuration Utility
Select the 'About' tab. The revision level will be displayed on the About tab.
Return to Top
Download and Upgrade Information
Download into a temporary directory of your choice.
Run the file name to extract. Please note that this file extracts into a directory. You will have the opportunity to change the drive and directory.
You are now ready to perform the upgrade process. For a successful upgrade, these file(s) MUST be prepared per the 'Upgrade' instructions in the readmefw.txt file.
Return to Top
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 6 and 5e Drivers
Operating System
OS/2
Version
30.728
Language Driver
Polish
Size Driver
1.1MB
File Name
lj273pi.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Download into a temporary directory.
Run the file name to extract.
See the readme file for detailed installation instructions.
Supports the following LaserJets
Mopier 240, Mopier 320
LJ8000, LJ8000 N, LJ8000 DN
LJ5000, LJ5000 N, LJ5000 GN
LJ1100, LJ1100A
LJ2100, LJ2100M, LJ2100TN
LJ8100, LJ8100 N, LJ8100 DN
LJ4050, LJ4050 T, LJ4050 N, LJ4050 TN
LJ4000, LJ4000 T, LJ4000 N, LJ4000 TN
CLJ5, CLJ5M, CLJ
CLJ4500, CLJ4500 N, CLJ4500 DN
CLJ8500, CLJ8500 N, CLJ8500 DN
LJ6P, LJ6MP, LJ6L
LJ5, LJ5P, LJ5M, LJ5N, LJ5Si, LJ5SiMX, LJ5SiNX, 5Si Mopier
LJ4, LJ4+, LJ4M, LJ4M+, LJ4P, LJ4MP, LJ4L, LJ4ML, LJ4Si, LJ4SiMX, LJ4V, LJ4MV
LJIII, LJIIIP, LJIIID, LJIIISi
LJII, LJIID, LJIIP, LJIIP+
LJ, LJ+, LJ 500+, LJ2000
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PostScript Driver
Operating System
OS/2
Version
30.589
Language Driver
Polish
Size Driver
806KB
File Name
lj275pi.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Download into a temporary directory.
Run the file name to extract.
See the readme file for detailed installation instructions.
Supports the following LaserJets
Mopier 240, Mopier 320
LJ8000, LJ8000 N, LJ8000 DN
LJ8100, LJ8100 N, LJ8100 DN
LJ5000, LJ5000 N, LJ5000 GN
LJ4050, LJ4050 T, LJ4050 N, LJ4050 TN
LJ4000, LJ4000 T, LJ4000 N, LJ4000 TN
LJ2100, LJ2100M, LJ2100TN
CLJ, CLJ5, CLJ5M
CLJ8500, CLJ8500 N, CLJ8500 DN
CLJ4500, CLJ4500 N, CLJ4500 DN
LJ6MP
LJ5M, LJ5MP, LJ5SiMX, 5Si Mopier
LJ4M, LJ4M+, LJ4MP, LJ4ML, LJ4SiMX, LJ4MV
LJIII, LJIIIP, LJIIID, LJIIISi
*LJII, LJIID, LJIIP, LJIIP+
LJ, LJ+, LJ 500+, LJ2000
*With sufficient memory and/or PostScript Cartridge
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 6 Printer Driver
Operating System
Windows 2000-XP
Version
4.3.2.138
Language Driver
Polish
Size Driver
1.5MB
File Name
lj1143pi.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\ljm240). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\ljm240).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 5e Printer Driver
Operating System
Windows 2000-XP
Version
4.3..2.138
Language Driver
Polish
Size Driver
1.5MB
File Name
lj1142pi.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\ljm240). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\ljm240).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Printer Status Alerts and Internet-Enabled Supplies Ordering IESO SureSupply for Direct Connect
Operating System
Windows 95-98-Me-NT4-2000-XP
Version
3.1
Language Driver
Polish
Size Driver
6.2MB
File Name
lj1079pi.exe
Observations
Important Information
Internet enabled supplies ordering for direct connect to your PC is included in the Printer Status and Alerts software. After reviewing or being alerted to your supplies status, you can order your supplies on-line.
You will need to install the Printer Status and Alerts software once on each computer for all supported HP LaserJet printers to be connected. Not all printers are supported in each software. Please read the
Some printers may experience slower performance due to the different ways that some computers and printers handle bi-directional communication of the parallel (LPT) interface. Some larger, more complex jobs may need more time to process and print due to the increased communication traffic over the parallel interface.
Download Info
Below are easy-to-follow instructions for downloading and installing the Printer Status/Alerts and Internet Enabled Supplies Ordering software.
Before proceeding with the software installation, the printer must first be properly set up, the printer drivers must already be installed, and your computer must be ready to print.
Download the file to a folder on your hard drive.
Close any screen savers, virus protection programs, or any other software programs that are running on your computer.
Go to the folder where you downloaded the software and double click the file to extract the files.
Go to the folder where these files were extracted to, for example c:\lj1079, and double click on the setup.exe file to start the installation process. During the install process you will be asked to select options for "Display status window when." We suggest you select all of the options for Printer Status/Alerts.
You only need to install this software once on each computer for all supported HP printers connected, either on the network or direct.
Open the "Printer Status and Alerts" software. We suggest you review each of the options for status and alerts and select the ones you wish to receive for your printer.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 5e Driver
Operating System
Windows NT4
Version
4.3.2.177
Language Driver
Polish
Size Driver
1.4MB
File Name
lj357pi.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\lj357). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\lj357).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 6 Driver
Operating System
Windows NT4
Version
4.3.2.177
Language Driver
Polish
Size Driver
1.4MB
File Name
lj359pi.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\lj359). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\lj359).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Digital sending software
Operating System
Windows NT4-2000-XP
Version
3.7.5
Language Driver
Polish
Size Driver
50.3MB
File Name
ljmfpdss.exe
Date
20 Jul 2004
Observations
Readme
This upgrade of the HP MFP Digital Sending Software provides digital sending support for the following products:
HP Mopier 240
HP Mopier 320
HP LaserJet 8000 MFP
HP LaserJet 8100 MFP
HP LaserJet 8150 MFP
WARNING: Do not upgrade version 2.x of the Digital Sender Module unless you have an HP MFP Digital Sending Software version 3.0 license (Secure Access or Communications). If you are upgrading a version of the Digital Sender Module version 2.x, the Send-to-Email, Send-to-Fax, and NT Authentication licenses, will be converted to 'legacy licenses' but these features will not be functional until a Digital Sending Software version 3.0 license is entered in the licensing tab.
A Secure Access license provides Send to Email and Authentication
A Communications license provides Send to Email, Authentication, and Send to Fax
HP MFP DSS license packs are available as follows:
HP DSS 3.0 - Secure Access
5 mfp license pack T1929AA (option 0AD)
10 mfp license pack T1929AA (option 0A9)
50 mfp license pack T1929AA (option 0AA)
HP DSS 3.0 - Communications
5 mfp license pack T1930AA (option 0AD)
10 mfp license pack T1930AA (option 0A9)
50 mfp license pack T1930AA (option 0AA)
IMPORTANT NOTE: These license packs are cumulative. For example, if you are upgrading version 2.x of the Digital Sender Module and have installed two email licenses, two send-to-fax licenses, and two NT-authentication licenses, and purchase a five mfp Communications license pack, the six legacy license will be upgraded to Communications licenses and the Digital Sending Software will then be able to support 11 MFPs total.
IMPORTANT NOTE: This software is compatible with all released versions of MFP firmware but there may be significant advantages in upgrading to the latest release versions of firmware.
Revision History
Current Version 3.7.5
Previous Versions3.6.6
3.5.45
3.4.7
3.0.112
Return to Top
Why Would I Need to Perform an Upgrade?
HP periodically releases a new version of the Digital Sending Software to provide defect fixes and product enhancements. An upgrade to the digital sending software may be necessary if you determine that you will benefit from an improvement that is documented in the readmefw.txt file.
Return to Top
Determining the Current Revision Level of the Digital Sending Software
To determine the current revision level:
Go to the Start Menu.
Select Programs
Select Hewlett-Packard
Select HP MFP Digital Sending Software (or with pre 3.x software select HP Digital Sender Module)
Select the Configuration Utility
Select the 'About' tab. The revision level will be displayed on the About tab.
Return to Top
Download and Upgrade Information
Download into a temporary directory of your choice.
Run the file name to extract. Please note that this file extracts into a directory. You will have the opportunity to change the drive and directory.
You are now ready to perform the upgrade process. For a successful upgrade, these file(s) MUST be prepared per the 'Upgrade' instructions in the readmefw.txt file.
Return to Top
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
HP mfp digital sending Software
Operating System
Windows NT4-2000-XP
Version
3.7.5
Language Driver
Polish
Size Driver
50.3MB
File Name
ljmfpdss.exe
Date
20 Jul 2004
Observations
Readme
This upgrade of the hp MFP Digital Sending Software provides digital sending support for the following products:
hp Mopier 240
hp Mopier 320
hp LaserJet 8000 MFP
hp LaserJet 8100 MFP
hp LaserJet 8150 MFP
WARNING: Do not upgrade version 2.x of the Digital Sender Module unless you have an hp MFP Digital Sending Software version 3.0 license (Secure Access or Communications). If you are upgrading a version of the Digital Sender Module version 2.x, the Send-to-Email, Send-to-Fax, and NT Authentication licenses, will be converted to 'legacy licenses' but these features will not be functional until a Digital Sending Software version 3.0 license is entered in the licensing tab.
A Secure Access license provides Send to Email and Authentication
A Communications license provides Send to Email, Authentication, and Send to Fax
hp MFP DSS license packs are available as follows:
hp DSS 3.0 - Secure Access
5 mfp license pack T1929AA (option 0AD)
10 mfp license pack T1929AA (option 0A9)
50 mfp license pack T1929AA (option 0AA)
hp DSS 3.0 - Communications
5 mfp license pack T1930AA (option 0AD)
10 mfp license pack T1930AA (option 0A9)
50 mfp license pack T1930AA (option 0AA)
IMPORTANT NOTE: These license packs are cumulative. For example, if you are upgrading version 2.x of the Digital Sender Module and have installed two email licenses, two send-to-fax licenses, and two NT-authentication licenses, and purchase a five mfp Communications license pack, the six legacy license will be upgraded to Communications licenses and the Digital Sending Software will then be able to support 11 MFPs total.
IMPORTANT NOTE: This software is compatible with all released versions of MFP firmware but there may be significant advantages in upgrading to the latest release versions of firmware.
Revision History
Current Version 3.7.5
Previous Versions3.6.6
3.5.45
3.4.7
3.0.112
Return to Top
Why Would I Need to Perform an Upgrade?
HP periodically releases a new version of the Digital Sending Software to provide defect and product enhancements. An upgrade to the digital sending software may be necessary if you determine that you will benefit from an improvement that is documented in the readmefw.txt file.
Return to Top
Determining the Current Revision Level of the Digital Sending Software
To determine the current revision level:
Go to the Start Menu.
Select Programs
Select Hewlett-Packard
Select hp MFP Digital Sending Software (or with pre 3.x software select hp Digital Sender Module)
Select the Configuration Utility
Select the 'About' tab. The revision level will be displayed on the About tab.
Return to Top
Download and Upgrade Information
Download into a temporary directory of your choice.
Run the file name to extract. Please note that this file extracts into a directory. You will have the opportunity to change the drive and directory.
You are now ready to perform the upgrade process. For a successful upgrade, these file(s) MUST be prepared per the 'Upgrade' instructions in the readmefw.txt file.
Return to Top
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Monochrome printing software and utility
Operating System
Mac OS 8 Mac OS 9
Version
1.5
Language Utilities
Portuguese
Size Driver
4.4MB
File Name
ljmonopr.sit
Date
14 Nov 2003
Observations
The HP LaserJet Installer provides HP LaserJet PostScript printing support for the Mac OS 8.6, 9.0, 9.04, 9.1, and 9.2 operating systems.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
HP LaserJet monochrome printing Software and utility
Operating System
Mac OS 8-Mac OS 9
Version
1.5
Language Utilities
Portuguese
Size Driver
4.4MB
File Name
ljmonopr.sit
Date
14 Nov 2003
Observations
The HP LaserJet Installer provides HP LaserJet PostScript printing support for the Mac OS 8.6, 9.0, 9.04, 9.1, and 9.2 operating systems.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 6 and 5e Drivers
Operating System
OS/2
Version
30.728
Language Driver
Portuguese
Size Driver
1.1MB
File Name
lj273pr.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Download into a temporary directory.
Run the file name to extract.
See the readme file for detailed installation instructions.
Supports the following LaserJets
Mopier 240, Mopier 320
LJ8000, LJ8000 N, LJ8000 DN
LJ5000, LJ5000 N, LJ5000 GN
LJ1100, LJ1100A
LJ2100, LJ2100M, LJ2100TN
LJ8100, LJ8100 N, LJ8100 DN
LJ4050, LJ4050 T, LJ4050 N, LJ4050 TN
LJ4000, LJ4000 T, LJ4000 N, LJ4000 TN
CLJ5, CLJ5M, CLJ
CLJ4500, CLJ4500 N, CLJ4500 DN
CLJ8500, CLJ8500 N, CLJ8500 DN
LJ6P, LJ6MP, LJ6L
LJ5, LJ5P, LJ5M, LJ5N, LJ5Si, LJ5SiMX, LJ5SiNX, 5Si Mopier
LJ4, LJ4+, LJ4M, LJ4M+, LJ4P, LJ4MP, LJ4L, LJ4ML, LJ4Si, LJ4SiMX, LJ4V, LJ4MV
LJIII, LJIIIP, LJIIID, LJIIISi
LJII, LJIID, LJIIP, LJIIP+
LJ, LJ+, LJ 500+, LJ2000
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PostScript Driver
Operating System
OS/2
Version
30.589
Language Driver
Portuguese
Size Driver
805KB
File Name
lj275pr.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Download into a temporary directory.
Run the file name to extract.
See the readme file for detailed installation instructions.
Supports the following LaserJets
Mopier 240, Mopier 320
LJ8000, LJ8000 N, LJ8000 DN
LJ8100, LJ8100 N, LJ8100 DN
LJ5000, LJ5000 N, LJ5000 GN
LJ4050, LJ4050 T, LJ4050 N, LJ4050 TN
LJ4000, LJ4000 T, LJ4000 N, LJ4000 TN
LJ2100, LJ2100M, LJ2100TN
CLJ, CLJ5, CLJ5M
CLJ8500, CLJ8500 N, CLJ8500 DN
CLJ4500, CLJ4500 N, CLJ4500 DN
LJ6MP
LJ5M, LJ5MP, LJ5SiMX, 5Si Mopier
LJ4M, LJ4M+, LJ4MP, LJ4ML, LJ4SiMX, LJ4MV
LJIII, LJIIIP, LJIIID, LJIIISi
*LJII, LJIID, LJIIP, LJIIP+
LJ, LJ+, LJ 500+, LJ2000
*With sufficient memory and/or PostScript Cartridge
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 6 Printer Driver
Operating System
Windows 2000-XP
Version
4.3.2.138
Language Driver
Portuguese
Size Driver
1.5MB
File Name
lj1143pr.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\ljm240). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\ljm240).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 5e Printer Driver
Operating System
Windows 2000-XP
Version
4.3..2.138
Language Driver
Portuguese
Size Driver
1.5MB
File Name
lj1142pr.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\ljm240). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\ljm240).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Printer Status Alerts and Internet-Enabled Supplies Ordering IESO SureSupply for Direct Connect
Operating System
Windows 95-98-Me-NT4-2000-XP
Version
3.1
Language Driver
Portuguese
Size Driver
6.2MB
File Name
lj1079pr.exe
Observations
Important Information
Internet enabled supplies ordering for direct connect to your PC is included in the Printer Status and Alerts software. After reviewing or being alerted to your supplies status, you can order your supplies on-line.
You will need to install the Printer Status and Alerts software once on each computer for all supported HP LaserJet printers to be connected. Not all printers are supported in each software. Please read the
Some printers may experience slower performance due to the different ways that some computers and printers handle bi-directional communication of the parallel (LPT) interface. Some larger, more complex jobs may need more time to process and print due to the increased communication traffic over the parallel interface.
Download Info
Below are easy-to-follow instructions for downloading and installing the Printer Status/Alerts and Internet Enabled Supplies Ordering software.
Before proceeding with the software installation, the printer must first be properly set up, the printer drivers must already be installed, and your computer must be ready to print.
Download the file to a folder on your hard drive.
Close any screen savers, virus protection programs, or any other software programs that are running on your computer.
Go to the folder where you downloaded the software and double click the file to extract the files.
Go to the folder where these files were extracted to, for example c:\lj1079, and double click on the setup.exe file to start the installation process. During the install process you will be asked to select options for "Display status window when." We suggest you select all of the options for Printer Status/Alerts.
You only need to install this software once on each computer for all supported HP printers connected, either on the network or direct.
Open the "Printer Status and Alerts" software. We suggest you review each of the options for status and alerts and select the ones you wish to receive for your printer.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 5e Driver
Operating System
Windows NT3.5
Version
3.44
Language Driver
Portuguese
Size Driver
198KB
File Name
lj804pr.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Download into a temporary directory.
Run the file name to extract.
See the Readme file for installation instructions.
Supports the following HPPrinters
LJ8000, LJ8000 N, LJ8000 DN
LJ8100, LJ8100 N, LJ8100 DN
Mopier 240
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 5e Driver
Operating System
Windows NT4
Version
4.3.2.177
Language Driver
Portuguese
Size Driver
1.4MB
File Name
lj357pr.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\lj357). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\lj357).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 6 Driver
Operating System
Windows NT4
Version
4.3.2.177
Language Driver
Portuguese
Size Driver
1.4MB
File Name
lj359pr.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\lj359). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\lj359).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PostScript Point and Print Bundle
Operating System
Windows NT4-2000
Version
1.0
Language Driver
Portuguese
Size Driver
654KB
File Name
hpmopier240_ps_pr.exe
Observations
Download Info
To download into a temporary, default directory on your PC, download the file from the section below. Note the directory and path where the file is saved to. You will need to access this file on your PC.
To expand (unzip) this file; find the directory where the file was saved to. Double click on the file.
Please note that this file will create and extract into a default directory on your hard drive. You will have the opportunity to change the Drive and Directory.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Digital sending software
Operating System
Windows NT4-2000-XP
Version
3.7.5
Language Driver
Portuguese
Size Driver
50.3MB
File Name
ljmfpdss.exe
Date
20 Jul 2004
Observations
Readme
This upgrade of the HP MFP Digital Sending Software provides digital sending support for the following products:
HP Mopier 240
HP Mopier 320
HP LaserJet 8000 MFP
HP LaserJet 8100 MFP
HP LaserJet 8150 MFP
WARNING: Do not upgrade version 2.x of the Digital Sender Module unless you have an HP MFP Digital Sending Software version 3.0 license (Secure Access or Communications). If you are upgrading a version of the Digital Sender Module version 2.x, the Send-to-Email, Send-to-Fax, and NT Authentication licenses, will be converted to 'legacy licenses' but these features will not be functional until a Digital Sending Software version 3.0 license is entered in the licensing tab.
A Secure Access license provides Send to Email and Authentication
A Communications license provides Send to Email, Authentication, and Send to Fax
HP MFP DSS license packs are available as follows:
HP DSS 3.0 - Secure Access
5 mfp license pack T1929AA (option 0AD)
10 mfp license pack T1929AA (option 0A9)
50 mfp license pack T1929AA (option 0AA)
HP DSS 3.0 - Communications
5 mfp license pack T1930AA (option 0AD)
10 mfp license pack T1930AA (option 0A9)
50 mfp license pack T1930AA (option 0AA)
IMPORTANT NOTE: These license packs are cumulative. For example, if you are upgrading version 2.x of the Digital Sender Module and have installed two email licenses, two send-to-fax licenses, and two NT-authentication licenses, and purchase a five mfp Communications license pack, the six legacy license will be upgraded to Communications licenses and the Digital Sending Software will then be able to support 11 MFPs total.
IMPORTANT NOTE: This software is compatible with all released versions of MFP firmware but there may be significant advantages in upgrading to the latest release versions of firmware.
Revision History
Current Version 3.7.5
Previous Versions3.6.6
3.5.45
3.4.7
3.0.112
Return to Top
Why Would I Need to Perform an Upgrade?
HP periodically releases a new version of the Digital Sending Software to provide defect fixes and product enhancements. An upgrade to the digital sending software may be necessary if you determine that you will benefit from an improvement that is documented in the readmefw.txt file.
Return to Top
Determining the Current Revision Level of the Digital Sending Software
To determine the current revision level:
Go to the Start Menu.
Select Programs
Select Hewlett-Packard
Select HP MFP Digital Sending Software (or with pre 3.x software select HP Digital Sender Module)
Select the Configuration Utility
Select the 'About' tab. The revision level will be displayed on the About tab.
Return to Top
Download and Upgrade Information
Download into a temporary directory of your choice.
Run the file name to extract. Please note that this file extracts into a directory. You will have the opportunity to change the drive and directory.
You are now ready to perform the upgrade process. For a successful upgrade, these file(s) MUST be prepared per the 'Upgrade' instructions in the readmefw.txt file.
Return to Top
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
HP mfp digital sending Software
Operating System
Windows NT4-2000-XP
Version
3.7.5
Language Driver
Portuguese
Size Driver
50.3MB
File Name
ljmfpdss.exe
Date
20 Jul 2004
Observations
Readme
This upgrade of the hp MFP Digital Sending Software provides digital sending support for the following products:
hp Mopier 240
hp Mopier 320
hp LaserJet 8000 MFP
hp LaserJet 8100 MFP
hp LaserJet 8150 MFP
WARNING: Do not upgrade version 2.x of the Digital Sender Module unless you have an hp MFP Digital Sending Software version 3.0 license (Secure Access or Communications). If you are upgrading a version of the Digital Sender Module version 2.x, the Send-to-Email, Send-to-Fax, and NT Authentication licenses, will be converted to 'legacy licenses' but these features will not be functional until a Digital Sending Software version 3.0 license is entered in the licensing tab.
A Secure Access license provides Send to Email and Authentication
A Communications license provides Send to Email, Authentication, and Send to Fax
hp MFP DSS license packs are available as follows:
hp DSS 3.0 - Secure Access
5 mfp license pack T1929AA (option 0AD)
10 mfp license pack T1929AA (option 0A9)
50 mfp license pack T1929AA (option 0AA)
hp DSS 3.0 - Communications
5 mfp license pack T1930AA (option 0AD)
10 mfp license pack T1930AA (option 0A9)
50 mfp license pack T1930AA (option 0AA)
IMPORTANT NOTE: These license packs are cumulative. For example, if you are upgrading version 2.x of the Digital Sender Module and have installed two email licenses, two send-to-fax licenses, and two NT-authentication licenses, and purchase a five mfp Communications license pack, the six legacy license will be upgraded to Communications licenses and the Digital Sending Software will then be able to support 11 MFPs total.
IMPORTANT NOTE: This software is compatible with all released versions of MFP firmware but there may be significant advantages in upgrading to the latest release versions of firmware.
Revision History
Current Version 3.7.5
Previous Versions3.6.6
3.5.45
3.4.7
3.0.112
Return to Top
Why Would I Need to Perform an Upgrade?
HP periodically releases a new version of the Digital Sending Software to provide defect and product enhancements. An upgrade to the digital sending software may be necessary if you determine that you will benefit from an improvement that is documented in the readmefw.txt file.
Return to Top
Determining the Current Revision Level of the Digital Sending Software
To determine the current revision level:
Go to the Start Menu.
Select Programs
Select Hewlett-Packard
Select hp MFP Digital Sending Software (or with pre 3.x software select hp Digital Sender Module)
Select the Configuration Utility
Select the 'About' tab. The revision level will be displayed on the About tab.
Return to Top
Download and Upgrade Information
Download into a temporary directory of your choice.
Run the file name to extract. Please note that this file extracts into a directory. You will have the opportunity to change the drive and directory.
You are now ready to perform the upgrade process. For a successful upgrade, these file(s) MUST be prepared per the 'Upgrade' instructions in the readmefw.txt file.
Return to Top
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 6 and 5e Drivers
Operating System
OS/2
Version
30.728
Language Driver
Portuguese Brazilian
Size Driver
908KB
File Name
lj273br.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Download into a temporary directory.
Run the file name to extract.
See the readme file for detailed installation instructions.
Supports the following LaserJets
Mopier 240, Mopier 320
LJ8000, LJ8000 N, LJ8000 DN
LJ5000, LJ5000 N, LJ5000 GN
LJ1100, LJ1100A
LJ2100, LJ2100M, LJ2100TN
LJ3200, LJ3200se - English only for now
LJ8100, LJ8100 N, LJ8100 DN
LJ4050, LJ4050 T, LJ4050 N, LJ4050 TN
LJ4000, LJ4000 T, LJ4000 N, LJ4000 TN
CLJ5, CLJ5M, CLJ
CLJ4500, CLJ4500 N, CLJ4500 DN
CLJ8500, CLJ8500 N, CLJ8500 DN
LJ6P, LJ6MP, LJ6L
LJ5, LJ5P, LJ5M, LJ5N, LJ5Si, LJ5SiMX, LJ5SiNX, 5Si Mopier
LJ4, LJ4+, LJ4M, LJ4M+, LJ4P, LJ4MP, LJ4L, LJ4ML, LJ4Si, LJ4SiMX, LJ4V, LJ4MV
LJIII, LJIIIP, LJIIID, LJIIISi
LJII, LJIID, LJIIP, LJIIP+
LJ, LJ+, LJ 500+, LJ2000
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PostScript Driver
Operating System
OS/2
Version
30.589
Language Driver
Portuguese Brazilian
Size Driver
641KB
File Name
lj275br.exe
Observations
HP LaserJet PostScript Driver v30.589,OS/2.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Monochrome printing software and utility
Operating System
Mac OS 8 Mac OS 9
Version
1.31
Language Utilities
Russian
Size Driver
5.2MB
File Name
ljmonoru.sit
Date
2 Apr 2003
Observations
The HP LaserJet Installer provides HP LaserJet PostScript printing support for the Mac OS 8.6, 9.0, 9.04, 9.1, and 9.2 operating systems.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
HP LaserJet monochrome printing Software and utility
Operating System
Mac OS 8-Mac OS 9
Version
1.31
Language Utilities
Russian
Size Driver
5.2MB
File Name
ljmonoru.sit
Date
2 Apr 2003
Observations
The HP LaserJet Installer provides HP LaserJet PostScript printing support for the Mac OS 8.6, 9.0, 9.04, 9.1, and 9.2 operating systems.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 6 and 5e Drivers
Operating System
OS/2
Version
30.728
Language Driver
Russian
Size Driver
1.1MB
File Name
lj273ru.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Download into a temporary directory.
Run the file name to extract.
See the readme file for detailed installation instructions.
Supports the following LaserJets
Mopier 240, Mopier 320
LJ8000, LJ8000 N, LJ8000 DN
LJ5000, LJ5000 N, LJ5000 GN
LJ1100, LJ1100A
LJ2100, LJ2100M, LJ2100TN
LJ8100, LJ8100 N, LJ8100 DN
LJ4050, LJ4050 T, LJ4050 N, LJ4050 TN
LJ4000, LJ4000 T, LJ4000 N, LJ4000 TN
CLJ5, CLJ5M, CLJ
CLJ4500, CLJ4500 N, CLJ4500 DN
CLJ8500, CLJ8500 N, CLJ8500 DN
LJ6P, LJ6MP, LJ6L
LJ5, LJ5P, LJ5M, LJ5N, LJ5Si, LJ5SiMX, LJ5SiNX, 5Si Mopier
LJ4, LJ4+, LJ4M, LJ4M+, LJ4P, LJ4MP, LJ4L, LJ4ML, LJ4Si, LJ4SiMX, LJ4V, LJ4MV
LJIII, LJIIIP, LJIIID, LJIIISi
LJII, LJIID, LJIIP, LJIIP+
LJ, LJ+, LJ 500+, LJ2000
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PostScript Driver
Operating System
OS/2
Version
30.589
Language Driver
Russian
Size Driver
807KB
File Name
lj275ru.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Download into a temporary directory.
Run the file name to extract.
See the readme file for detailed installation instructions.
Supports the following LaserJets
Mopier 240, Mopier 320
LJ8000, LJ8000 N, LJ8000 DN
LJ8100, LJ8100 N, LJ8100 DN
LJ5000, LJ5000 N, LJ5000 GN
LJ4050, LJ4050 T, LJ4050 N, LJ4050 TN
LJ4000, LJ4000 T, LJ4000 N, LJ4000 TN
LJ2100, LJ2100M, LJ2100TN
CLJ, CLJ5, CLJ5M
CLJ8500, CLJ8500 N, CLJ8500 DN
CLJ4500, CLJ4500 N, CLJ4500 DN
LJ6MP
LJ5M, LJ5MP, LJ5SiMX, 5Si Mopier
LJ4M, LJ4M+, LJ4MP, LJ4ML, LJ4SiMX, LJ4MV
LJIII, LJIIIP, LJIIID, LJIIISi
*LJII, LJIID, LJIIP, LJIIP+
LJ, LJ+, LJ 500+, LJ2000
*With sufficient memory and/or PostScript Cartridge
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 6 Printer Driver
Operating System
Windows 2000-XP
Version
4.3.2.138
Language Driver
Russian
Size Driver
1.5MB
File Name
lj1143ru.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\ljm240). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\ljm240).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 5e Printer Driver
Operating System
Windows 2000-XP
Version
4.3..2.138
Language Driver
Russian
Size Driver
1.5MB
File Name
lj1142ru.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\ljm240). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\ljm240).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Printer Status Alerts and Internet-Enabled Supplies Ordering IESO SureSupply for Direct Connect
Operating System
Windows 95-98-Me-NT4-2000-XP
Version
3.1
Language Driver
Russian
Size Driver
6.2MB
File Name
lj1079ru.exe
Observations
Important Information
Internet enabled supplies ordering for direct connect to your PC is included in the Printer Status and Alerts software. After reviewing or being alerted to your supplies status, you can order your supplies on-line.
You will need to install the Printer Status and Alerts software once on each computer for all supported HP LaserJet printers to be connected. Not all printers are supported in each software. Please read the
Some printers may experience slower performance due to the different ways that some computers and printers handle bi-directional communication of the parallel (LPT) interface. Some larger, more complex jobs may need more time to process and print due to the increased communication traffic over the parallel interface.
Download Info
Below are easy-to-follow instructions for downloading and installing the Printer Status/Alerts and Internet Enabled Supplies Ordering software.
Before proceeding with the software installation, the printer must first be properly set up, the printer drivers must already be installed, and your computer must be ready to print.
Download the file to a folder on your hard drive.
Close any screen savers, virus protection programs, or any other software programs that are running on your computer.
Go to the folder where you downloaded the software and double click the file to extract the files.
Go to the folder where these files were extracted to, for example c:\lj1079, and double click on the setup.exe file to start the installation process. During the install process you will be asked to select options for "Display status window when." We suggest you select all of the options for Printer Status/Alerts.
You only need to install this software once on each computer for all supported HP printers connected, either on the network or direct.
Open the "Printer Status and Alerts" software. We suggest you review each of the options for status and alerts and select the ones you wish to receive for your printer.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 5e Driver
Operating System
Windows NT4
Version
4.3.2.177
Language Driver
Russian
Size Driver
1.4MB
File Name
lj357ru.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\lj357). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\lj357).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 6 Driver
Operating System
Windows NT4
Version
4.3.2.177
Language Driver
Russian
Size Driver
1.4MB
File Name
lj359ru.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\lj359). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\lj359).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PostScript Point and Print Bundle
Operating System
Windows NT4-2000
Version
1.0
Language Driver
Russian
Size Driver
651KB
File Name
hpmopier240_ps_ru.exe
Observations
Download Info
This option allows you to download a single file that contains the entire Product Software.
To download into a temporary, default directory on your PC, download the file. Note the directory and path where the file is saved to. You will need to access this file on your PC.
To expand (unzip) this file; find the directory where the file was saved to. Double click on the file.
Please note that this file will create and extract into a default directory on your hard drive. You will have the opportunity to change the Drive and Directory.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Monochrome printing software and utility
Operating System
Mac OS 8 Mac OS 9
Version
1.5
Language Utilities
Spanish
Size Driver
4.4MB
File Name
ljmonosp.sit
Date
14 Nov 2003
Observations
The HP LaserJet Installer provides HP LaserJet PostScript printing support for the Mac OS 8.6, 9.0, 9.04, 9.1, and 9.2 operating systems.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
HP LaserJet monochrome printing Software and utility
Operating System
Mac OS 8-Mac OS 9
Version
1.5
Language Utilities
Spanish
Size Driver
4.4MB
File Name
ljmonosp.sit
Date
14 Nov 2003
Observations
The HP LaserJet Installer provides HP LaserJet PostScript printing support for the Mac OS 8.6, 9.0, 9.04, 9.1, and 9.2 operating systems.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Family AutoCAD 10-11-12-13 HP-GL2 Driver
Operating System
MS-DOS
Version
4.5
Language Driver
Spanish
Size Driver
791KB
File Name
lj131sp.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Download into a temporary directory.
Run the file name to extract.
See the readme file for detailed installation instructions.
This driver supports the following HP LaserJets:
LJ240 Mopier, LJ320 Mopier
CLJ 8500, CLJ8500 N, CLJ 8500 DN
LJ8100, LJ8100 N, LJ8100 DN
LJ8000, LJ8000 N, LJ8000 DN
LJ5000, LJ5000 N, LJ5000 GN
LJ4050, LJ4050 T, LJ4050 N, LJ4050 TN
LJ4000, LJ4000 T, LJ4000 N, LJ4000 TN
LJ5, LJ5M, LJ5N, LJ5Si, LJ5SiMX, LJ5SiNX, 5Si Mopier
LJ4, LJ4M, LJ4+, LJ4M+, LJ4Si, LJ4SiMX, LJ4V, LJ4MV
LJII, LJIIID, LJIIISi
LJII,LJIID: w/GL/2cartridge
This driver does not support the following HP LaserJets
CLJ, CLJ5, CLJ5M
LJ6P, LJ6MP, LJ6L
LJ5P, LJ5MP
LJ4P, LJ4MP, LJ4L, LJ4ML
LJIIIP
LJIIP, LJIIP+
LJ2000, LJ500+, LJ, LJ+
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 6 and 5e Drivers
Operating System
OS/2
Version
30.728
Language Driver
Spanish
Size Driver
1.1MB
File Name
lj273sp.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Download into a temporary directory.
Run the file name to extract.
See the readme file for detailed installation instructions.
Supports the following LaserJets
Mopier 240, Mopier 320
LJ8000, LJ8000 N, LJ8000 DN
LJ5000, LJ5000 N, LJ5000 GN
LJ1100, LJ1100A
LJ2100, LJ2100M, LJ2100TN
LJ8100, LJ8100 N, LJ8100 DN
LJ4050, LJ4050 T, LJ4050 N, LJ4050 TN
LJ4000, LJ4000 T, LJ4000 N, LJ4000 TN
CLJ5, CLJ5M, CLJ
CLJ4500, CLJ4500 N, CLJ4500 DN
CLJ8500, CLJ8500 N, CLJ8500 DN
LJ6P, LJ6MP, LJ6L
LJ5, LJ5P, LJ5M, LJ5N, LJ5Si, LJ5SiMX, LJ5SiNX, 5Si Mopier
LJ4, LJ4+, LJ4M, LJ4M+, LJ4P, LJ4MP, LJ4L, LJ4ML, LJ4Si, LJ4SiMX, LJ4V, LJ4MV
LJIII, LJIIIP, LJIIID, LJIIISi
LJII, LJIID, LJIIP, LJIIP+
LJ, LJ+, LJ 500+, LJ2000
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PostScript Driver
Operating System
OS/2
Version
30.589
Language Driver
Spanish
Size Driver
807KB
File Name
lj275sp.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Download into a temporary directory.
Run the file name to extract.
See the readme file for detailed installation instructions.
Supports the following LaserJets
Mopier 240, Mopier 320
LJ8000, LJ8000 N, LJ8000 DN
LJ8100, LJ8100 N, LJ8100 DN
LJ5000, LJ5000 N, LJ5000 GN
LJ4050, LJ4050 T, LJ4050 N, LJ4050 TN
LJ4000, LJ4000 T, LJ4000 N, LJ4000 TN
LJ2100, LJ2100M, LJ2100TN
CLJ, CLJ5, CLJ5M
CLJ8500, CLJ8500 N, CLJ8500 DN
CLJ4500, CLJ4500 N, CLJ4500 DN
LJ6MP
LJ5M, LJ5MP, LJ5SiMX, 5Si Mopier
LJ4M, LJ4M+, LJ4MP, LJ4ML, LJ4SiMX, LJ4MV
LJIII, LJIIIP, LJIIID, LJIIISi
*LJII, LJIID, LJIIP, LJIIP+
LJ, LJ+, LJ 500+, LJ2000
*With sufficient memory and/or PostScript Cartridge
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 6 Printer Driver
Operating System
Windows 2000-XP
Version
4.3.2.138
Language Driver
Spanish
Size Driver
1.5MB
File Name
lj1143sp.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\ljm240). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\ljm240).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 5e Printer Driver
Operating System
Windows 2000-XP
Version
4.3..2.138
Language Driver
Spanish
Size Driver
1.5MB
File Name
lj1142sp.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\ljm240). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\ljm240).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
AutoCAD 12-13 HP-GL2 Driver
Operating System
Windows 3.1
Version
4.1b
Language Driver
Spanish
Size Driver
1.2MB
File Name
lj132sp.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Download into a temporary directory.
Run the file name to extract.
See the readme file for detailed installation instructions.
This driver supports the following HP LaserJets:
LJ240 Mopier, LJ320 Mopier
CLJ 8500, CLJ8500 N, CLJ 8500 DN
LJ8100, LJ8100 N, LJ8100 DN
LJ8000, LJ8000 N, LJ8000 DN
LJ5000, LJ5000 N, LJ5000 GN
LJ4050, LJ4050 T, LJ4050 N, LJ4050 TN
LJ4000, LJ4000 T, LJ4000 N, LJ4000 TN
LJ5, LJ5M, LJ5N, LJ5Si, LJ5SiMX, LJ5SiNX, 5Si Mopier
LJ4, LJ4M, LJ4+, LJ4M+, LJ4Si, LJ4SiMX, LJ4V, LJ4MV
LJII, LJIIID, LJIIISi
LJII,LJIID: w/GL/2cartridge
This driver does not support the following HP LaserJets
CLJ, CLJ5, CLJ5M
LJ6P, LJ6MP, LJ6L
LJ5P, LJ5MP
LJ4P, LJ4MP, LJ4L, LJ4ML
LJIIIP
LJIIP, LJIIP+
LJ2000, LJ500+, LJ, LJ+
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Resource Manager
Operating System
Windows 95-98
Version
1.2.1.2
Language Driver
Spanish
Size Driver
8.7MB
File Name
lj191sp.exe
Observations
HPMass Storage Resource Manager, Windows 95/98.
The HPResource Manager is a Windows 95/98 application that allows you to download, delete, and manage your printer-based fonts (PCL and Postscript) and PCL5e macros (electronic forms, overlays, letterhead etc.). The Resource Manager supports the most common network protocols (TCP/IP & IPX/SPX), as well as direct parallel port connection for greater connectivity to meet your business needs. It provides ease-of-use through an intuitive user-interface and a full, on-line help facility.
The HPResource Manager is fully compatible with the HPLaserJet 5 (excl. LaserJet 5P/5MP/5L) with C3930A/C3931A Flash SIMM's, 5Si with C2965A Disk Drive, 4000, 5000, and 8000 series printers with C4286A/C4287A Flash DIMM's or C2985A Disk Drive.
Download Info
To download into a temporary, default directory on your PC, download the file from the section below. Note the directory and path where the file is saved to. You will need to access this file on your PC.
To expand (unzip) this file; find the directory where the file was saved to. Double click on the file.
Please note that this file will create and extract into a default directory on your hard drive. You will have the opportunity to change the Drive and Directory.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Printer Status Alerts and Internet-Enabled Supplies Ordering IESO SureSupply for Direct Connect
Operating System
Windows 95-98-Me-NT4-2000-XP
Version
3.1
Language Driver
Spanish
Size Driver
6.2MB
File Name
lj1079sp.exe
Observations
Important Information
Internet enabled supplies ordering for direct connect to your PC is included in the Printer Status and Alerts software. After reviewing or being alerted to your supplies status, you can order your supplies on-line.
You will need to install the Printer Status and Alerts software once on each computer for all supported HP LaserJet printers to be connected. Not all printers are supported in each software. Please read the
Some printers may experience slower performance due to the different ways that some computers and printers handle bi-directional communication of the parallel (LPT) interface. Some larger, more complex jobs may need more time to process and print due to the increased communication traffic over the parallel interface.
Download Info
Below are easy-to-follow instructions for downloading and installing the Printer Status/Alerts and Internet Enabled Supplies Ordering software.
Before proceeding with the software installation, the printer must first be properly set up, the printer drivers must already be installed, and your computer must be ready to print.
Download the file to a folder on your hard drive.
Close any screen savers, virus protection programs, or any other software programs that are running on your computer.
Go to the folder where you downloaded the software and double click the file to extract the files.
Go to the folder where these files were extracted to, for example c:\lj1079, and double click on the setup.exe file to start the installation process. During the install process you will be asked to select options for "Display status window when." We suggest you select all of the options for Printer Status/Alerts.
You only need to install this software once on each computer for all supported HP printers connected, either on the network or direct.
Open the "Printer Status and Alerts" software. We suggest you review each of the options for status and alerts and select the ones you wish to receive for your printer.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 5e Driver
Operating System
Windows NT3.5
Version
3.44
Language Driver
Spanish
Size Driver
199KB
File Name
lj804sp.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Download into a temporary directory.
Run the file name to extract.
See the Readme file for installation instructions.
Supports the following HPPrinters
LJ8000, LJ8000 N, LJ8000 DN
LJ8100, LJ8100 N, LJ8100 DN
Mopier 240
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
AutoCAD 13-14 HP-GL2 Driver
Operating System
Windows NT3.5-NT4
Version
4.5
Language Driver
Spanish
Size Driver
2.1MB
File Name
lj133sp.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Download into a temporary directory.
Run the file name to extract.
See the readme file for detailed installation instructions.
This driver supports the following HP LaserJets:
LJ240 Mopier, LJ320 Mopier
CLJ 8500, CLJ8500 N, CLJ 8500 DN
LJ8100, LJ8100 N, LJ8100 DN
LJ8000, LJ8000 N, LJ8000 DN
LJ5000, LJ5000 N, LJ5000 GN
LJ4050, LJ4050 T, LJ4050 N, LJ4050 TN
LJ4000, LJ4000 T, LJ4000 N, LJ4000 TN
LJ5, LJ5M, LJ5N, LJ5Si, LJ5SiMX, LJ5SiNX, 5Si Mopier
LJ4, LJ4M, LJ4+, LJ4M+, LJ4Si, LJ4SiMX, LJ4V, LJ4MV
LJII, LJIIID, LJIIISi
LJII,LJIID: w/GL/2cartridge
This driver does not support the following HP LaserJets
CLJ, CLJ5, CLJ5M
LJ6P, LJ6MP, LJ6L
LJ5P, LJ5MP
LJ4P, LJ4MP, LJ4L, LJ4ML
LJIIIP
LJIIP, LJIIP+
LJ2000, LJ500+, LJ, LJ+
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Resource Manager
Operating System
Windows NT4
Version
1.2.1.2
Language Driver
Spanish
Size Driver
8.7MB
File Name
lj192sp.exe
Observations
HPMass Storage Resource Manager, Windows NT 4.0.
The HPResource Manager is a Windows NT 4.0 application that allows you to download, delete, and manage your printer-based fonts (PCL and Postscript) and PCL5e macros (electronic forms, overlays, letterhead etc.). The Resource Manager supports the most common network protocols (TCP/IP & IPX/SPX), as well as direct parallel port connection for greater connectivity to meet your business needs. It provides ease-of-use through an intuitive user-interface and a full, on-line help facility.
The HPResource Manager is fully compatible with the HPLaserJet 5 (excl. LaserJet 5P/5MP/5L) with C3930A/C3931A Flash SIMM's, 5Si with C2965A Disk Drive, 4000, 5000, and 8000 series printers with C4286A/C4287A Flash DIMM's or C2985A Disk Drive.
Download Info
To download into a temporary, default directory on your PC, download the file from the section below. Note the directory and path where the file is saved to. You will need to access this file on your PC.
To expand (unzip) this file; find the directory where the file was saved to. Double click on the file.
Please note that this file will create and extract into a default directory on your hard drive. You will have the opportunity to change the Drive and Directory.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 5e Driver
Operating System
Windows NT4
Version
4.3.2.177
Language Driver
Spanish
Size Driver
1.4MB
File Name
lj357sp.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\lj357). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\lj357).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 6 Driver
Operating System
Windows NT4
Version
4.3.2.177
Language Driver
Spanish
Size Driver
1.4MB
File Name
lj359sp.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\lj359). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\lj359).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PostScript Point and Print Bundle
Operating System
Windows NT4-2000
Version
1.0
Language Driver
Spanish
Size Driver
657KB
File Name
hpmopier240_ps_sp.exe
Observations
Download Info
To download into a temporary, default directory on your PC, download the file from the section below. Note the directory and path where the file is saved to. You will need to access this file on your PC.
To expand (unzip) this file; find the directory where the file was saved to. Double click on the file.
Please note that this file will create and extract into a default directory on your hard drive. You will have the opportunity to change the Drive and Directory.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Digital sending software
Operating System
Windows NT4-2000-XP
Version
3.7.5
Language Driver
Spanish
Size Driver
50.3MB
File Name
ljmfpdss.exe
Date
20 Jul 2004
Observations
Readme
This upgrade of the HP MFP Digital Sending Software provides digital sending support for the following products:
HP Mopier 240
HP Mopier 320
HP LaserJet 8000 MFP
HP LaserJet 8100 MFP
HP LaserJet 8150 MFP
WARNING: Do not upgrade version 2.x of the Digital Sender Module unless you have an HP MFP Digital Sending Software version 3.0 license (Secure Access or Communications). If you are upgrading a version of the Digital Sender Module version 2.x, the Send-to-Email, Send-to-Fax, and NT Authentication licenses, will be converted to 'legacy licenses' but these features will not be functional until a Digital Sending Software version 3.0 license is entered in the licensing tab.
A Secure Access license provides Send to Email and Authentication
A Communications license provides Send to Email, Authentication, and Send to Fax
HP MFP DSS license packs are available as follows:
HP DSS 3.0 - Secure Access
5 mfp license pack T1929AA (option 0AD)
10 mfp license pack T1929AA (option 0A9)
50 mfp license pack T1929AA (option 0AA)
HP DSS 3.0 - Communications
5 mfp license pack T1930AA (option 0AD)
10 mfp license pack T1930AA (option 0A9)
50 mfp license pack T1930AA (option 0AA)
IMPORTANT NOTE: These license packs are cumulative. For example, if you are upgrading version 2.x of the Digital Sender Module and have installed two email licenses, two send-to-fax licenses, and two NT-authentication licenses, and purchase a five mfp Communications license pack, the six legacy license will be upgraded to Communications licenses and the Digital Sending Software will then be able to support 11 MFPs total.
IMPORTANT NOTE: This software is compatible with all released versions of MFP firmware but there may be significant advantages in upgrading to the latest release versions of firmware.
Revision History
Current Version 3.7.5
Previous Versions3.6.6
3.5.45
3.4.7
3.0.112
Return to Top
Why Would I Need to Perform an Upgrade?
HP periodically releases a new version of the Digital Sending Software to provide defect fixes and product enhancements. An upgrade to the digital sending software may be necessary if you determine that you will benefit from an improvement that is documented in the readmefw.txt file.
Return to Top
Determining the Current Revision Level of the Digital Sending Software
To determine the current revision level:
Go to the Start Menu.
Select Programs
Select Hewlett-Packard
Select HP MFP Digital Sending Software (or with pre 3.x software select HP Digital Sender Module)
Select the Configuration Utility
Select the 'About' tab. The revision level will be displayed on the About tab.
Return to Top
Download and Upgrade Information
Download into a temporary directory of your choice.
Run the file name to extract. Please note that this file extracts into a directory. You will have the opportunity to change the drive and directory.
You are now ready to perform the upgrade process. For a successful upgrade, these file(s) MUST be prepared per the 'Upgrade' instructions in the readmefw.txt file.
Return to Top
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
HP mfp digital sending Software
Operating System
Windows NT4-2000-XP
Version
3.7.5
Language Driver
Spanish
Size Driver
50.3MB
File Name
ljmfpdss.exe
Date
20 Jul 2004
Observations
Readme
This upgrade of the hp MFP Digital Sending Software provides digital sending support for the following products:
hp Mopier 240
hp Mopier 320
hp LaserJet 8000 MFP
hp LaserJet 8100 MFP
hp LaserJet 8150 MFP
WARNING: Do not upgrade version 2.x of the Digital Sender Module unless you have an hp MFP Digital Sending Software version 3.0 license (Secure Access or Communications). If you are upgrading a version of the Digital Sender Module version 2.x, the Send-to-Email, Send-to-Fax, and NT Authentication licenses, will be converted to 'legacy licenses' but these features will not be functional until a Digital Sending Software version 3.0 license is entered in the licensing tab.
A Secure Access license provides Send to Email and Authentication
A Communications license provides Send to Email, Authentication, and Send to Fax
hp MFP DSS license packs are available as follows:
hp DSS 3.0 - Secure Access
5 mfp license pack T1929AA (option 0AD)
10 mfp license pack T1929AA (option 0A9)
50 mfp license pack T1929AA (option 0AA)
hp DSS 3.0 - Communications
5 mfp license pack T1930AA (option 0AD)
10 mfp license pack T1930AA (option 0A9)
50 mfp license pack T1930AA (option 0AA)
IMPORTANT NOTE: These license packs are cumulative. For example, if you are upgrading version 2.x of the Digital Sender Module and have installed two email licenses, two send-to-fax licenses, and two NT-authentication licenses, and purchase a five mfp Communications license pack, the six legacy license will be upgraded to Communications licenses and the Digital Sending Software will then be able to support 11 MFPs total.
IMPORTANT NOTE: This software is compatible with all released versions of MFP firmware but there may be significant advantages in upgrading to the latest release versions of firmware.
Revision History
Current Version 3.7.5
Previous Versions3.6.6
3.5.45
3.4.7
3.0.112
Return to Top
Why Would I Need to Perform an Upgrade?
HP periodically releases a new version of the Digital Sending Software to provide defect and product enhancements. An upgrade to the digital sending software may be necessary if you determine that you will benefit from an improvement that is documented in the readmefw.txt file.
Return to Top
Determining the Current Revision Level of the Digital Sending Software
To determine the current revision level:
Go to the Start Menu.
Select Programs
Select Hewlett-Packard
Select hp MFP Digital Sending Software (or with pre 3.x software select hp Digital Sender Module)
Select the Configuration Utility
Select the 'About' tab. The revision level will be displayed on the About tab.
Return to Top
Download and Upgrade Information
Download into a temporary directory of your choice.
Run the file name to extract. Please note that this file extracts into a directory. You will have the opportunity to change the drive and directory.
You are now ready to perform the upgrade process. For a successful upgrade, these file(s) MUST be prepared per the 'Upgrade' instructions in the readmefw.txt file.
Return to Top
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Monochrome printing software and utility
Operating System
Mac OS 8 Mac OS 9
Version
1.5
Language Utilities
Swedish
Size Driver
4.4MB
File Name
ljmonosw.sit
Date
14 Nov 2003
Observations
The HP LaserJet Installer provides HP LaserJet PostScript printing support for the Mac OS 8.6, 9.0, 9.04, 9.1, and 9.2 operating systems.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
HP LaserJet monochrome printing Software and utility
Operating System
Mac OS 8-Mac OS 9
Version
1.5
Language Utilities
Swedish
Size Driver
4.4MB
File Name
ljmonosw.sit
Date
14 Nov 2003
Observations
The HP LaserJet Installer provides HP LaserJet PostScript printing support for the Mac OS 8.6, 9.0, 9.04, 9.1, and 9.2 operating systems.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PostScript Driver
Operating System
OS/2
Version
30.589
Language Driver
Swedish
Size Driver
801KB
File Name
lj275sw.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Download into a temporary directory.
Run the file name to extract.
See the readme file for detailed installation instructions.
Supports the following LaserJets
Mopier 240, Mopier 320
LJ8000, LJ8000 N, LJ8000 DN
LJ8100, LJ8100 N, LJ8100 DN
LJ5000, LJ5000 N, LJ5000 GN
LJ4050, LJ4050 T, LJ4050 N, LJ4050 TN
LJ4000, LJ4000 T, LJ4000 N, LJ4000 TN
LJ2100, LJ2100M, LJ2100TN
CLJ, CLJ5, CLJ5M
CLJ8500, CLJ8500 N, CLJ8500 DN
CLJ4500, CLJ4500 N, CLJ4500 DN
LJ6MP
LJ5M, LJ5MP, LJ5SiMX, 5Si Mopier
LJ4M, LJ4M+, LJ4MP, LJ4ML, LJ4SiMX, LJ4MV
LJIII, LJIIIP, LJIIID, LJIIISi
*LJII, LJIID, LJIIP, LJIIP+
LJ, LJ+, LJ 500+, LJ2000
*With sufficient memory and/or PostScript Cartridge
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 6 and 5e Drivers
Operating System
OS/2
Version
30.728
Language Driver
Swedish
Size Driver
1.1MB
File Name
lj273sw.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Download into a temporary directory.
Run the file name to extract.
See the readme file for detailed installation instructions.
Supports the following LaserJets
Mopier 240, Mopier 320
LJ8000, LJ8000 N, LJ8000 DN
LJ5000, LJ5000 N, LJ5000 GN
LJ1100, LJ1100A
LJ2100, LJ2100M, LJ2100TN
LJ8100, LJ8100 N, LJ8100 DN
LJ4050, LJ4050 T, LJ4050 N, LJ4050 TN
LJ4000, LJ4000 T, LJ4000 N, LJ4000 TN
CLJ5, CLJ5M, CLJ
CLJ4500, CLJ4500 N, CLJ4500 DN
CLJ8500, CLJ8500 N, CLJ8500 DN
LJ6P, LJ6MP, LJ6L
LJ5, LJ5P, LJ5M, LJ5N, LJ5Si, LJ5SiMX, LJ5SiNX, 5Si Mopier
LJ4, LJ4+, LJ4M, LJ4M+, LJ4P, LJ4MP, LJ4L, LJ4ML, LJ4Si, LJ4SiMX, LJ4V, LJ4MV
LJIII, LJIIIP, LJIIID, LJIIISi
LJII, LJIID, LJIIP, LJIIP+
LJ, LJ+, LJ 500+, LJ2000
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 6 Printer Driver
Operating System
Windows 2000-XP
Version
4.3.2.138
Language Driver
Swedish
Size Driver
1.5MB
File Name
lj1143sw.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\ljm240). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\ljm240).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 5e Printer Driver
Operating System
Windows 2000-XP
Version
4.3..2.138
Language Driver
Swedish
Size Driver
1.5MB
File Name
lj1142sw.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\ljm240). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\ljm240).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Printer Status Alerts and Internet-Enabled Supplies Ordering IESO SureSupply for Direct Connect
Operating System
Windows 95-98-Me-NT4-2000-XP
Version
3.1
Language Driver
Swedish
Size Driver
6.2MB
File Name
lj1079sw.exe
Observations
Important Information
Internet enabled supplies ordering for direct connect to your PC is included in the Printer Status and Alerts software. After reviewing or being alerted to your supplies status, you can order your supplies on-line.
You will need to install the Printer Status and Alerts software once on each computer for all supported HP LaserJet printers to be connected. Not all printers are supported in each software. Please read the
Some printers may experience slower performance due to the different ways that some computers and printers handle bi-directional communication of the parallel (LPT) interface. Some larger, more complex jobs may need more time to process and print due to the increased communication traffic over the parallel interface.
Download Info
Below are easy-to-follow instructions for downloading and installing the Printer Status/Alerts and Internet Enabled Supplies Ordering software.
Before proceeding with the software installation, the printer must first be properly set up, the printer drivers must already be installed, and your computer must be ready to print.
Download the file to a folder on your hard drive.
Close any screen savers, virus protection programs, or any other software programs that are running on your computer.
Go to the folder where you downloaded the software and double click the file to extract the files.
Go to the folder where these files were extracted to, for example c:\lj1079, and double click on the setup.exe file to start the installation process. During the install process you will be asked to select options for "Display status window when." We suggest you select all of the options for Printer Status/Alerts.
You only need to install this software once on each computer for all supported HP printers connected, either on the network or direct.
Open the "Printer Status and Alerts" software. We suggest you review each of the options for status and alerts and select the ones you wish to receive for your printer.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 5e Driver
Operating System
Windows NT3.5
Version
3.44
Language Driver
Swedish
Size Driver
196KB
File Name
lj804sw.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Download into a temporary directory.
Run the file name to extract.
See the Readme file for installation instructions.
Supports the following HPPrinters
LJ8000, LJ8000 N, LJ8000 DN
LJ8100, LJ8100 N, LJ8100 DN
Mopier 240
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 5e Driver
Operating System
Windows NT4
Version
4.3.2.177
Language Driver
Swedish
Size Driver
1.4MB
File Name
lj357sw.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\lj357). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\lj357).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 6 Driver
Operating System
Windows NT4
Version
4.3.2.177
Language Driver
Swedish
Size Driver
1.4MB
File Name
lj359sw.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\lj359). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\lj359).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PostScript Point and Print Bundle
Operating System
Windows NT4-2000
Version
1.0
Language Driver
Swedish
Size Driver
653KB
File Name
hpmopier240_ps_sw.exe
Observations
Download Info
This option allows you to download a single file that contains the entire Product Software.
To download into a temporary, default directory on your PC, download the file. Note the directory and path where the file is saved to. You will need to access this file on your PC.
To expand (unzip) this file; find the directory where the file was saved to. Double click on the file.
Please note that this file will create and extract into a default directory on your hard drive. You will have the opportunity to change the Drive and Directory.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
HP mfp digital sending Software
Operating System
Windows NT4-2000-XP
Version
3.7.5
Language Driver
Swedish
Size Driver
50.3MB
File Name
ljmfpdss.exe
Date
20 Jul 2004
Observations
Readme
This upgrade of the hp MFP Digital Sending Software provides digital sending support for the following products:
hp Mopier 240
hp Mopier 320
hp LaserJet 8000 MFP
hp LaserJet 8100 MFP
hp LaserJet 8150 MFP
WARNING: Do not upgrade version 2.x of the Digital Sender Module unless you have an hp MFP Digital Sending Software version 3.0 license (Secure Access or Communications). If you are upgrading a version of the Digital Sender Module version 2.x, the Send-to-Email, Send-to-Fax, and NT Authentication licenses, will be converted to 'legacy licenses' but these features will not be functional until a Digital Sending Software version 3.0 license is entered in the licensing tab.
A Secure Access license provides Send to Email and Authentication
A Communications license provides Send to Email, Authentication, and Send to Fax
hp MFP DSS license packs are available as follows:
hp DSS 3.0 - Secure Access
5 mfp license pack T1929AA (option 0AD)
10 mfp license pack T1929AA (option 0A9)
50 mfp license pack T1929AA (option 0AA)
hp DSS 3.0 - Communications
5 mfp license pack T1930AA (option 0AD)
10 mfp license pack T1930AA (option 0A9)
50 mfp license pack T1930AA (option 0AA)
IMPORTANT NOTE: These license packs are cumulative. For example, if you are upgrading version 2.x of the Digital Sender Module and have installed two email licenses, two send-to-fax licenses, and two NT-authentication licenses, and purchase a five mfp Communications license pack, the six legacy license will be upgraded to Communications licenses and the Digital Sending Software will then be able to support 11 MFPs total.
IMPORTANT NOTE: This software is compatible with all released versions of MFP firmware but there may be significant advantages in upgrading to the latest release versions of firmware.
Revision History
Current Version 3.7.5
Previous Versions3.6.6
3.5.45
3.4.7
3.0.112
Return to Top
Why Would I Need to Perform an Upgrade?
HP periodically releases a new version of the Digital Sending Software to provide defect and product enhancements. An upgrade to the digital sending software may be necessary if you determine that you will benefit from an improvement that is documented in the readmefw.txt file.
Return to Top
Determining the Current Revision Level of the Digital Sending Software
To determine the current revision level:
Go to the Start Menu.
Select Programs
Select Hewlett-Packard
Select hp MFP Digital Sending Software (or with pre 3.x software select hp Digital Sender Module)
Select the Configuration Utility
Select the 'About' tab. The revision level will be displayed on the About tab.
Return to Top
Download and Upgrade Information
Download into a temporary directory of your choice.
Run the file name to extract. Please note that this file extracts into a directory. You will have the opportunity to change the drive and directory.
You are now ready to perform the upgrade process. For a successful upgrade, these file(s) MUST be prepared per the 'Upgrade' instructions in the readmefw.txt file.
Return to Top
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Digital sending software
Operating System
Windows NT4-2000-XP
Version
3.7.5
Language Driver
Swedish
Size Driver
50.3MB
File Name
ljmfpdss.exe
Date
20 Jul 2004
Observations
Readme
This upgrade of the HP MFP Digital Sending Software provides digital sending support for the following products:
HP Mopier 240
HP Mopier 320
HP LaserJet 8000 MFP
HP LaserJet 8100 MFP
HP LaserJet 8150 MFP
WARNING: Do not upgrade version 2.x of the Digital Sender Module unless you have an HP MFP Digital Sending Software version 3.0 license (Secure Access or Communications). If you are upgrading a version of the Digital Sender Module version 2.x, the Send-to-Email, Send-to-Fax, and NT Authentication licenses, will be converted to 'legacy licenses' but these features will not be functional until a Digital Sending Software version 3.0 license is entered in the licensing tab.
A Secure Access license provides Send to Email and Authentication
A Communications license provides Send to Email, Authentication, and Send to Fax
HP MFP DSS license packs are available as follows:
HP DSS 3.0 - Secure Access
5 mfp license pack T1929AA (option 0AD)
10 mfp license pack T1929AA (option 0A9)
50 mfp license pack T1929AA (option 0AA)
HP DSS 3.0 - Communications
5 mfp license pack T1930AA (option 0AD)
10 mfp license pack T1930AA (option 0A9)
50 mfp license pack T1930AA (option 0AA)
IMPORTANT NOTE: These license packs are cumulative. For example, if you are upgrading version 2.x of the Digital Sender Module and have installed two email licenses, two send-to-fax licenses, and two NT-authentication licenses, and purchase a five mfp Communications license pack, the six legacy license will be upgraded to Communications licenses and the Digital Sending Software will then be able to support 11 MFPs total.
IMPORTANT NOTE: This software is compatible with all released versions of MFP firmware but there may be significant advantages in upgrading to the latest release versions of firmware.
Revision History
Current Version 3.7.5
Previous Versions3.6.6
3.5.45
3.4.7
3.0.112
Return to Top
Why Would I Need to Perform an Upgrade?
HP periodically releases a new version of the Digital Sending Software to provide defect fixes and product enhancements. An upgrade to the digital sending software may be necessary if you determine that you will benefit from an improvement that is documented in the readmefw.txt file.
Return to Top
Determining the Current Revision Level of the Digital Sending Software
To determine the current revision level:
Go to the Start Menu.
Select Programs
Select Hewlett-Packard
Select HP MFP Digital Sending Software (or with pre 3.x software select HP Digital Sender Module)
Select the Configuration Utility
Select the 'About' tab. The revision level will be displayed on the About tab.
Return to Top
Download and Upgrade Information
Download into a temporary directory of your choice.
Run the file name to extract. Please note that this file extracts into a directory. You will have the opportunity to change the drive and directory.
You are now ready to perform the upgrade process. For a successful upgrade, these file(s) MUST be prepared per the 'Upgrade' instructions in the readmefw.txt file.
Return to Top
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Monochrome printing software and utility
Operating System
Mac OS 8 Mac OS 9
Version
1.31
Language Utilities
Turkish
Size Driver
5.1MB
File Name
ljmonotr.sit
Date
2 Apr 2003
Observations
The HP LaserJet Installer provides HP LaserJet PostScript printing support for the Mac OS 8.6, 9.0, 9.04, 9.1, and 9.2 operating systems.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
HP LaserJet monochrome printing Software and utility
Operating System
Mac OS 8-Mac OS 9
Version
1.31
Language Utilities
Turkish
Size Driver
5.1MB
File Name
ljmonotr.sit
Date
2 Apr 2003
Observations
The HP LaserJet Installer provides HP LaserJet PostScript printing support for the Mac OS 8.6, 9.0, 9.04, 9.1, and 9.2 operating systems.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 6 and 5e Drivers
Operating System
OS/2
Version
30.728
Language Driver
Turkish
Size Driver
1.1MB
File Name
lj273tu.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Download into a temporary directory.
Run the file name to extract.
See the readme file for detailed installation instructions.
Supports the following LaserJets
Mopier 240, Mopier 320
LJ8000, LJ8000 N, LJ8000 DN
LJ5000, LJ5000 N, LJ5000 GN
LJ1100, LJ1100A
LJ2100, LJ2100M, LJ2100TN
LJ8100, LJ8100 N, LJ8100 DN
LJ4050, LJ4050 T, LJ4050 N, LJ4050 TN
LJ4000, LJ4000 T, LJ4000 N, LJ4000 TN
CLJ5, CLJ5M, CLJ
CLJ4500, CLJ4500 N, CLJ4500 DN
CLJ8500, CLJ8500 N, CLJ8500 DN
LJ6P, LJ6MP, LJ6L
LJ5, LJ5P, LJ5M, LJ5N, LJ5Si, LJ5SiMX, LJ5SiNX, 5Si Mopier
LJ4, LJ4+, LJ4M, LJ4M+, LJ4P, LJ4MP, LJ4L, LJ4ML, LJ4Si, LJ4SiMX, LJ4V, LJ4MV
LJIII, LJIIIP, LJIIID, LJIIISi
LJII, LJIID, LJIIP, LJIIP+
LJ, LJ+, LJ 500+, LJ2000
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PostScript Driver
Operating System
OS/2
Version
30.589
Language Driver
Turkish
Size Driver
804KB
File Name
lj275tu.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Download into a temporary directory.
Run the file name to extract.
See the readme file for detailed installation instructions.
Supports the following LaserJets
Mopier 240, Mopier 320
LJ8000, LJ8000 N, LJ8000 DN
LJ8100, LJ8100 N, LJ8100 DN
LJ5000, LJ5000 N, LJ5000 GN
LJ4050, LJ4050 T, LJ4050 N, LJ4050 TN
LJ4000, LJ4000 T, LJ4000 N, LJ4000 TN
LJ2100, LJ2100M, LJ2100TN
CLJ, CLJ5, CLJ5M
CLJ8500, CLJ8500 N, CLJ8500 DN
CLJ4500, CLJ4500 N, CLJ4500 DN
LJ6MP
LJ5M, LJ5MP, LJ5SiMX, 5Si Mopier
LJ4M, LJ4M+, LJ4MP, LJ4ML, LJ4SiMX, LJ4MV
LJIII, LJIIIP, LJIIID, LJIIISi
*LJII, LJIID, LJIIP, LJIIP+
LJ, LJ+, LJ 500+, LJ2000
*With sufficient memory and/or PostScript Cartridge
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 5e Printer Driver
Operating System
Windows 2000-XP
Version
4.3..2.138
Language Driver
Turkish
Size Driver
1.5MB
File Name
lj1142tu.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\ljm240). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\ljm240).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 6 Printer Driver
Operating System
Windows 2000-XP
Version
4.3.2.138
Language Driver
Turkish
Size Driver
1.5MB
File Name
lj1143tu.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\ljm240). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\ljm240).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
Printer Status Alerts and Internet-Enabled Supplies Ordering IESO SureSupply for Direct Connect
Operating System
Windows 95-98-Me-NT4-2000-XP
Version
3.1
Language Driver
Turkish
Size Driver
6.2MB
File Name
lj1079tu.exe
Observations
Important Information
Internet enabled supplies ordering for direct connect to your PC is included in the Printer Status and Alerts software. After reviewing or being alerted to your supplies status, you can order your supplies on-line.
You will need to install the Printer Status and Alerts software once on each computer for all supported HP LaserJet printers to be connected. Not all printers are supported in each software. Please read the
Some printers may experience slower performance due to the different ways that some computers and printers handle bi-directional communication of the parallel (LPT) interface. Some larger, more complex jobs may need more time to process and print due to the increased communication traffic over the parallel interface.
Download Info
Below are easy-to-follow instructions for downloading and installing the Printer Status/Alerts and Internet Enabled Supplies Ordering software.
Before proceeding with the software installation, the printer must first be properly set up, the printer drivers must already be installed, and your computer must be ready to print.
Download the file to a folder on your hard drive.
Close any screen savers, virus protection programs, or any other software programs that are running on your computer.
Go to the folder where you downloaded the software and double click the file to extract the files.
Go to the folder where these files were extracted to, for example c:\lj1079, and double click on the setup.exe file to start the installation process. During the install process you will be asked to select options for "Display status window when." We suggest you select all of the options for Printer Status/Alerts.
You only need to install this software once on each computer for all supported HP printers connected, either on the network or direct.
Open the "Printer Status and Alerts" software. We suggest you review each of the options for status and alerts and select the ones you wish to receive for your printer.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 6 Driver
Operating System
Windows NT4
Version
4.3.2.177
Language Driver
Turkish
Size Driver
1.4MB
File Name
lj359tu.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\lj359). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\lj359).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Company
Hewlett Packard
Categories
Multifunctions
Model
Hewlett Packard HP Mopier 240
Description
PCL 5e Driver
Operating System
Windows NT4
Version
4.3.2.177
Language Driver
Turkish
Size Driver
1.4MB
File Name
lj357tu.exe
Observations
Download Info
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\lj357). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\lj357).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Access to Official Website Hewlett Packard
Welcome to the HelpDrivers, driver for printers.
Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more
You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.
Do not rename the file you're downloading, it may cause installation problems.