Available 8 files for Hewlett Packard HP LaserJet M1120 MFP

 

Select Files

Company

Hewlett Packard

Categories

Multifunctions

Model

Hewlett Packard HP LaserJet M1120 MFP

Description

Firmware Update - Western Control Panel

Operating System

Mac OS X Mac OS X 10.5 Mac OS X 10.3 Mac OS X 10.4

Version

20080228 Rev E

Language Firmware

English

Size Driver

655KB

File Name

m1120_fw_update-20080228.dmg

Observations

Note: This firmware applies to the products sold in Europe, Latin America, North America, and all other Asian countries and regions except Taiwan, Korea, China mainland, Thailand, and Hong Kong.

This is the HP LaserJet M1120 MFP Printer Firmware Update Utility.

Fixes

These changes are implemented in firmware date code 20080228:

Fixed corrupted Russian characters.

This revision includes fixes from previous rolls:

Improved copy quality.
Fixed the issue that device stalls at paper out.
Corrected some setting in EWS.
Improved scan speed over network.
Improved multiple page copy speed
Corrected control panel characters for Traditional Chinese.
Fixed the issue where copy fails following printing a demo page
Fixed the issue where copy fails when printing on certain paper size.
Fixed the behavior when disconnecting the USB cable during print.


Operating system(s): Mac OS X, Mac OS X 10.5, Mac OS X 10.3, Mac OS X 10.4
Download file size: 655.36k
System Requirements

The HP LaserJet M1120 printer must be in a READY state as shown by the LCD display on the control panel and remain powered on during the entire firmware update process.

NOTE: If you use Internet Explorer to download the firmware update utility, it may strip the .dmg extension to the file. Simply re-add the .dmg or .bin extension and MAC OS X should recognize the file as a disk image.

These utilities are for use on any Mac with OS X. It will NOT function in the MAC OS 9 (classic) environment.


Installation Instructions

Please use a 2 meter (6 foot) USB High speed (2.0) cable.
Once the firmware update process has started, do not use your Mac for other activity until the process is complete.
1. Mount the disk image containing the FW update.
2. Run the FW Update Application contained in the disk image.
3. Follow the onscreen prompts to continue.
4. If prompted, connect the printer via USB.
5. Upon finding an HP LaserJet m1120 printer, the utility will prompt you to reboot the printer by simply turn the power off and back on. This ensures the printer is in a proper state to receive the update.
6. Once the printer has been rebooted, the utility will allow you to download the firmware to the HP LaserJet m1120 printer.
7. DO NOT POWER CYCLE THE PRINTER during the firmware download process or it will leave your printer in an unusable state.
8. During the printer firmware update, the liquid crystal display (LCD) message on the printer control panel will display Printing Document and will change to Erasing. After a short while, the LCD display will change to Programming. After a short while, the LCD will display complete : ). The Ready LED on the printer will start flashing. The printer will automatically power cycle to reboot and will make noises similar to power on.
9. If it is desired to verify the update, a configuration page can be printed from the printer control panel (Select menu, > reports - press enter, > config reports ? press enter). The configuration page will display the current firmware revision in the Product information block, Firmware Datecode: 20080228.

Company

Hewlett Packard

Categories

Multifunctions

Model

Hewlett Packard HP LaserJet M1120 MFP

Description

Feature Software and Driver

Operating System

Mac OS X Mac OS X 10.5 Mac OS X 10.3 Mac OS X 10.4

Version

1.2.0

Language Driver

English

Size Driver

29.8MB

File Name

ljm1120n-osx-fulsol-v1.2.0.dmg

Observations

This download package contains HP LaserJet 1120MFP Series Mac OS X Installer with updated (Universal Binary) files. Full printing support for Mac OS X v10.3 or greater PPC and Intel processors.

Fixes

Original Software/Drivers


Operating system(s): Mac OS X, Mac OS X 10.5, Mac OS X 10.3, Mac OS X 10.4
Download file size: 29.85M
System Requirements

G3, G4, or G5 PowerPC processor

Mac OS X V10.3 and later, with 128 MB RAM and 50 MB of available hard-disk space.
CD-ROM drive or Internet connection


Installation Instructions

This section will help you in the download of the software to your computer and start you on the install process. Below are easy-to-follow instructions for downloading and installing printer drivers.

1. Click on the Download button of this page and save the file to your local hard drive.
2. Double-click the disk image to mount it with the OSX Disk Utility application. After the disk image is mounted on the desktop, it can be used just as a physical CD can.
3. Open the mounted image named HP LaserJet M1120, and double click HP LaserJet M1120 to start the install.
4. Follow the instructions of the installer.

Company

Hewlett Packard

Categories

Multifunctions

Model

Hewlett Packard HP LaserJet M1120 MFP

Description

Firmware Update - Asian Control Panel

Operating System

Mac OS X Mac OS X 10.5 Mac OS X 10.3 Mac OS X 10.4

Version

20080228 Rev E

Language Firmware

English

Size Driver

1.5MB

File Name

m1120_asiancp_fw_update-20080228.dmg

Observations

Note: This firmware applies to the products sold in Taiwan, Korea, China mainland, Thailand, and Hong Kong.

This is the HP LaserJet M1120 MFP Printer Firmware Update Utility.

Fixes

These changes are implemented in firmware date code 20080228:

Fixed corrupted Russian characters.

This revision includes fixes from previous rolls:

Improved copy quality.
Fixed the issue that device stalls at paper out.
Corrected some setting in EWS.
Improved scan speed over network.
Improved multiple page copy speed
Corrected control panel characters for Traditional Chinese.
Fixed the issue where copy fails following printing a demo page
Fixed the issue where copy fails when printing on certain paper size.
Fixed the behavior when disconnecting the USB cable during print.


Operating system(s): Mac OS X, Mac OS X 10.5, Mac OS X 10.3, Mac OS X 10.4
Download file size: 1.54M
System Requirements

The HP LaserJet M1120 printer must be in a READY state as shown by the LCD display on the control panel and remain powered on during the entire firmware update process.

NOTE: If you use Internet Explorer to download the firmware update utility, it may strip the .dmg extension to the file. Simply re-add the .dmg or .bin extension and MAC OS X should recognize the file as a disk image.

These utilities are for use on any Mac with OS X. It will NOT function in the MAC OS 9 (classic) environment.


Installation Instructions

Please use a 2 meter (6 foot) USB High speed (2.0) cable.
Once the firmware update process has started, do not use your Mac for other activity until the process is complete.
1. Mount the disk image containing the FW update.
2. Run the FW Update Application contained in the disk image.
3. Follow the onscreen prompts to continue.
4. If prompted, connect the printer via USB.
5. Upon finding an HP LaserJet m1120 printer, the utility will prompt you to reboot the printer by simply turn the power off and back on. This ensures the printer is in a proper state to receive the update.
6. Once the printer has been rebooted, the utility will allow you to download the firmware to the HP LaserJet m1120 printer.
7. DO NOT POWER CYCLE THE PRINTER during the firmware download process or it will leave your printer in an unusable state.
8. During the printer firmware update, the liquid crystal display (LCD) message on the printer control panel will display Printing Document and will change to Erasing. After a short while, the LCD display will change to Programming. After a short while, the LCD will display complete : ). The Ready LED on the printer will start flashing. The printer will automatically power cycle to reboot and will make noises similar to power on.
9. If it is desired to verify the update, a configuration page can be printed from the printer control panel (Select menu, > reports - press enter, > config reports ? press enter). The configuration page will display the current firmware revision in the Product information block, Firmware Datecode: 20080228.

Company

Hewlett Packard

Categories

Multifunctions

Model

Hewlett Packard HP LaserJet M1120 MFP

Description

Firmware Update - Western Control Panel

Operating System

Windows 2000-2003 64 bits-XP 64 bits-Vista 64 bits

Version

20080228 Rev E

Language Firmware

English

Size Driver

2.3MB

File Name

m1120_fw_update-20080228.exe

Observations

Note: This firmware applies to the products sold in Europe, Latin America, North America, and all other Asian countries and regions except Taiwan, Korea, China mainland, Thailand, and Hong Kong.

This is the HP LaserJet M1120 MFP Printer Firmware Update Utility.

Fixes

These changes are implemented in firmware date code 20080228

Fixed corrupted Russian characters.

This revision includes fixes from previous rolls

Improved copy quality.
Fixed the issue that device stalls at paper out.
Corrected some setting in EWS.
Improved scan speed over network.
Improved multiple page copy speed.
Corrected control panel characters for Traditional Chinese.
Fixed the issue where copy fails following printing a demo page.
Fixed the issue where copy fails when printing on certain paper size.
Fixed the behavior when disconnecting the USB cable during print.


Operating system(s): Microsoft Windows 2000, Microsoft Windows XP, Microsoft Windows Vista, Microsoft Windows Vista (64-bit), Microsoft Windows XP 64-Bit Edition, Microsoft Windows Server 2003, Microsoft Windows Server 2003 64-Bit Edition
Download file size: 2.39M
System Requirements

The HP LaserJet M1120 printer must be in a READY state as shown by the LCD display on the control panel and remain powered on during the entire firmware update process.

* Depending on the speed of your PC, the firmware update process may complete on the printer before the progress bar on the screen completes.
* Once the firmware update process has started, do not power cycle the printer or the PC until the firmware update process is complete. Avoid using the device during the firmware upgrade procedure?don't send a print job, for example.

IMPORTANT - Before the process starts: Turn the printer off and then back on at this time only to clear main printer memory. Make sure the firmware being updated is for the correct LaserJet product. For example, if you are updating the LJM1120, the firmware file should be for the LJM1120. If the incorrect version of firmware is downloaded to a device, the new code will be ignored and the device will retain its original firmware and return to a ready state.


Installation Instructions

1. Download the file to the desktop, if the Save from the download security dialog window is chosen.
a) If you choose RUN from the download security dialog window, skip step #2 and go to step 3.
b) Click on Run if a Microsoft internet explorer security window pops up.
2. Double click on the flash firmware update utility file. Click on Run if a Microsoft internet explorer security window pops up.
3. Read and Evaluate the license and click on accept terms if you wish to continue with the update.
4. If there is only one printer to update the firmware in, accept the default (the radio button already selected) unpack location. Click on Next. This default installation selection will delete the downloaded files at the end of the firmware update process.
5. A Window "LaserJet M1120 Firmware Update Utility 20080228" will open.
6. In the window adjacent to the "select printer to update" use the drop down arrow to select the HP LaserJet M1120 MFP driver. If you have previously assigned a different name to the HP LaserJet M1120, choose the name that represents the correct printer.
7. Click on the Start button in the "LaserJet M1120 Firmware Update Utility 20080228" dialog window.
8. The progress bar will begin to move to the right indicating information being transferred.
9. DO NOT power cycle the printer or the PC during this process or the printer may become unstable and or unusable without further attention from HP. The firmware update can take up to 5 minutes to complete. Please be patient.
10. During the printer firmware update, the liquid crystal display (LCD) on the printer control panel will display "Printing Document" and will change to "Erasing". After a short while, the LCD display will change to "Programming". After a short while, the LCD will display "complete : )". The "Ready" LED on the printer will start flashing. The printer will automatically power cycle to reboot and will make noises similar to power on.
11. To verify the update, a configuration page can be printed from the printer control panel (Select menu, > reports - press enter, > Config report ? press enter). The configuration page will display the current firmware revision in the Product information block, Firmware Datecode: 20080228.
12. On the display of the PC, a smiling face will appear in the "HP LaserJet M1120 Firmware Update 20080228" dialog box at the conclusion of the successful printer firmware update.

Company

Hewlett Packard

Categories

Multifunctions

Model

Hewlett Packard HP LaserJet M1120 MFP

Description

Firmware Update - Asian Control Panel

Operating System

Windows 2000-2003 64 bits-XP 64 bits-Vista 64 bits

Version

20080228 Rev E

Language Firmware

English

Size Driver

2.3MB

File Name

m1120_asiancp_fw_update-20080228.exe

Observations

Note: This firmware applies to the products sold in Taiwan, Korea, China mainland, Thailand, and Hong Kong.

This is the HP LaserJet M1120 MFP Printer Firmware Update Utility.

Fixes

These changes are implemented in firmware date code 20080228

Fixed corrupted Russian characters.

This revision includes fixes from previous rolls

Improved copy quality.
Fixed the issue that device stalls at paper out.
Corrected some setting in EWS.
Improved scan speed over network.
Improved multiple page copy speed.
Corrected control panel characters for Traditional Chinese.
Fixed the issue where copy fails following printing a demo page.
Fixed the issue where copy fails when printing on certain paper size.
Fixed the behavior when disconnecting the USB cable during print.


Operating system(s): Microsoft Windows 2000, Microsoft Windows XP, Microsoft Windows Vista, Microsoft Windows Vista (64-bit), Microsoft Windows XP 64-Bit Edition, Microsoft Windows Server 2003, Microsoft Windows Server 2003 64-Bit Edition
Download file size: 2.39M
System Requirements

The HP LaserJet M1120 printer must be in a READY state as shown by the LCD display on the control panel and remain powered on during the entire firmware update process.

* Depending on the speed of your PC, the firmware update process may complete on the printer before the progress bar on the screen completes.
* Once the firmware update process has started, do not power cycle the printer or the PC until the firmware update process is complete. Avoid using the device during the firmware upgrade procedure?don't send a print job, for example.

IMPORTANT - Before the process starts: Turn the printer off and then back on at this time only to clear main printer memory. Make sure the firmware being updated is for the correct LaserJet product. For example, if you are updating the LJM1120, the firmware file should be for the LJM1120. If the incorrect version of firmware is downloaded to a device, the new code will be ignored and the device will retain its original firmware and return to a ready state.


Installation Instructions

1. Download the file to the desktop, if the Save from the download security dialog window is chosen.
a) If you choose RUN from the download security dialog window, skip step #2 and go to step 3.
b) Click on Run if a Microsoft internet explorer security window pops up.
2. Double click on the flash firmware update utility file. Click on Run if a Microsoft internet explorer security window pops up.
3. Read and Evaluate the license and click on accept terms if you wish to continue with the update.
4. If there is only one printer to update the firmware in, accept the default (the radio button already selected) unpack location. Click on Next. This default installation selection will delete the downloaded files at the end of the firmware update process.
5. A Window "LaserJet M1120 Firmware Update Utility 20080228" will open.
6. In the window adjacent to the "select printer to update" use the drop down arrow to select the HP LaserJet M1120 MFP driver. If you have previously assigned a different name to the HP LaserJet M1120, choose the name that represents the correct printer.
7. Click on the Start button in the "LaserJet M1120 Firmware Update Utility 20080228" dialog window.
8. The progress bar will begin to move to the right indicating information being transferred.
9. DO NOT power cycle the printer or the PC during this process or the printer may become unstable and or unusable without further attention from HP. The firmware update can take up to 5 minutes to complete. Please be patient.
10. During the printer firmware update, the liquid crystal display (LCD) on the printer control panel will display "Printing Document" and will change to "Erasing". After a short while, the LCD display will change to "Programming". After a short while, the LCD will display "complete : )". The "Ready" LED on the printer will start flashing. The printer will automatically power cycle to reboot and will make noises similar to power on.
11. To verify the update, a configuration page can be printed from the printer control panel (Select menu, > reports - press enter, > Config report ? press enter). The configuration page will display the current firmware revision in the Product information block, Firmware Datecode: 20080228.
12. On the display of the PC, a smiling face will appear in the "HP LaserJet M1120 Firmware Update 20080228" dialog box at the conclusion of the successful printer firmware update.

Company

Hewlett Packard

Categories

Multifunctions

Model

Hewlett Packard HP LaserJet M1120 MFP

Description

Feature Software and Driver

Operating System

Windows 2000-2003-XP-Vista

Version

2.0

Language Driver

English

Size Driver

219.9MB

File Name

hp_ljm1120_full_solution.exe

Observations

This full software solution is the same solution as the in-box CD that came with your HP LaserJet 1120MFP Series.

This is not a software upgrade. If a prior version of the HP LaserJet 1120MFP Series software is currently installed, it must be uninstalled before installing this version.

Fixes

Original Software/Drivers


Operating system(s): Microsoft Windows 2000, Microsoft Windows XP, Microsoft Windows Vista, Microsoft Windows Server 2003
Download file size: 219.94M
System Requirements

Approximately 300 MB of hard disk space is require to use this download.

Pentium II or compatible processor

233-MHz processor with 64 MB RAM
35 MB of disk space
Minimum 16-color/grayscale display with 800 x 600 pixel resolution super video graphics array
(SVGA)

Onboard USB port
CD-ROM drive or Internet connection


Installation Instructions

This section will help you in the download of the software to your computer and start you on the install process. Below are easy-to-follow instructions for downloading and installing printer and scan drivers.

Approximately 300 MB of hard disk space is required to use this download.

1. Close any screen savers, virus protection programs, or other software programs running on your computer.
2. Click on Download Now and a File Download box will appear.
3. Select Save This Program to Disk and a Save As box will appear.
4. Select a directory to save the file in and click Save.
5. Locate the file using Windows Explorer when the download has completed.
6. Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the printer model that was downloaded (i.e: c:\HP_M1120_Full_Solution). However, you can change the path and directory name at the time of extracting the file. Please note the directory and path where the files are extracted.
7. Install this file by clicking Start then Run on your PC. Select Browse and find the directory where the file had been saved. Double-click on the file, autorun.exe to start the install.
8. Follow the on-screen instructions.

Company

Hewlett Packard

Categories

Multifunctions

Model

Hewlett Packard HP LaserJet M1120 MFP

Description

Hostbased Print Scan Plug and Play Drivers

Operating System

Windows 2000-2003-XP-Vista

Version

20071204

Language Driver

English

Size Driver

15.9MB

File Name

ljm1120-hb-pnp-win32-en.exe

Observations

The Plug and Play Bundle provides EZInstall to assist with installation for direct USB connections and offers basic print and scan for all-in-one and multifunction devices.

Fixes

Original Software/Drivers


Operating system(s): Microsoft Windows 2000, Microsoft Windows XP, Microsoft Windows Vista, Microsoft Windows Server 2003
Download file size: 15.99M
System Requirements

No additional prerequisites


Installation Instructions

This section will help you in the download of the software to your computer and start you on the install process.

Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.

1. Close any screen savers, virus protection programs, or other software programs running on your computer.
2. Click on Download Only and a File Download box will appear.
3. Select Save and a Save As box will appear.
4. Select a directory to save the file in and click Save.
5. Download Complete screen will open when the download is complete- select Run, Open Folder, or Close.
6. Select Run from the Download Complete dialog box. This will extract all the driver files into a directory on your hard drive. The default directory is C:\DOCUME~1\HP_ADM~1\LOCALS~1\Temp. Driver download directory path and directory name can be changed at this time by choosing Browse.
7. Select Unzip after an extraction location has been selected.
8. Winzip Self Extractor prompt of files unzipped successfully will be seen.
9. Click on OK.
10. Follow the instructions presented by the installation program.

Company

Hewlett Packard

Categories

Multifunctions

Model

Hewlett Packard HP LaserJet M1120 MFP

Description

Hostbased Print Scan Plug and Play Drivers

Operating System

Windows XP 64 bits-Vista 64 bits

Version

20070620

Language Driver

English

Size Driver

17.4MB

File Name

ljm1120-hb-pnp-win64-en.exe

Observations

The Plug and Play Bundle provides EZInstall to assist with installation for direct USB connections and offers basic print and scan for all-in-one and multifunction devices.

Fixes

Original Software/Drivers


Operating system(s): Microsoft Windows Vista (64-bit), Microsoft Windows XP x64
Download file size: 17.49M
System Requirements

No additional prerequisites


Installation Instructions

Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.

1. Close any software programs running on your computer.
2. Click the Download button and a File Download box will appear.
3. Select Save and a Save As box will appear.
4. Select a directory to save the file in and click Save. Remember the location of the saved file.
5. Locate the file using Windows Explorer when the download has completed.
6. Double click on the file. This will extract all the driver files into a directory on your hard drive. The default directory is C:\Users\ADMIN~1\AppData\Local\Temp. The extraction location path and directory name at the time of extracting the file can be changed by choosing the Browse button.
7. Click Next after the file extraction is complete and follow the instructions presented by the EZInstall program. Do NOT attach the USB cable to the printer until prompted by the EZInstall program.
8. After the installation is complete you can delete the file ljM1120MFP-HB-pnp-win64-.exe if desired.

Access to Official Website Hewlett Packard

Home English Home Spanish Home French Home German Drivers English Drivers Spanish Drivers French Drivers German

Welcome to the HelpDrivers, driver for printers.

Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more

You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.

Do not rename the file you're downloading, it may cause installation problems.