Foxconn 945PL7AC-S2 Motherboards > Downloads Drivers, Utilities, Manual and BIOS

Company

Foxconn

Categories

Motherboards

Serie

Foxconn Socket 775

Model

Foxconn 945PL7AC-S2

Description

System and Chipset Drivers

Operating System

Windows 2000 Workstation-XP-2003

Version

7.2.2.1006

Size Driver

19.9MB

File Name

chipset7.zip

Observations

* Installation Readme for F6 Floppy Utility for Foxconn 945PL7AC-S2.
* (F6flp32.exe or F6flp64.exe).

************************************************************
* 1. DETERMINING THE PROCESSOR TYPE
************************************************************

You will first need to determine if your system contains a
32-bit or 64-bit processor.

1. On the Start menu:
1a. For Windows* 2000, select Settings and then
select Control Panel.
1b. For Windows* XP or later operating systems,
select Control Panel.
1c. Open the 'System' applet (you may first have to
select 'Switch to Classic View').

2. Select the 'Hardware' tab.

3. Select the 'Device Manager' button.

4. The processor type will be indicated by the value under
the 'Computer' section on the 'General' tab.
4a. On a 64-bit system, Intel(R) Itanium or Intel(R) Itanium 2
or Intel(R) Pentium 4 will appear.
4b. On a 32-bit system, a value other than Intel(R) Itanium or
Intel(R) Itanium 2 will appear.
************************************************************
* 2. CHOOSING THE EXECUTABLE
************************************************************

If you have a 64-bit system, use F6flp64.exe.
If you have a 32-bit system, use F6flp32.exe.
************************************************************
* 3. RUNNING THE EXECUTABLE
************************************************************

1. In Microsoft* Windows*, double-click on the executable
to run.

2. Follow the steps to copy the floppy disk image onto a
floppy.
*Other names and products may be claimed as the property of others.
************************************************************
************************************************************
* Installation Readme for Intel Matrix Storage Manager in Foxconn 945PL7AC-S2.
*
* Refer to the system requirements for the operating systems
* supported by Intel(R) Matrix Storage Manager.
*
************************************************************

************************************************************
* Intel is making no claims of usability, efficacy or
* warranty. The INTEL SOFTWARE LICENSE AGREEMeNT contained
* herein completely defines the license and use of this
* software.
************************************************************
************************************************************
* CONTENTS OF THIS DOCUMENT
************************************************************

This document for Foxconn 945PL7AC-S2 contains the following sections:

1. Overview
2. System Requirements
3. Language Support
4. Determining the System Mode
5. Installing the Software for Foxconn 945PL7AC-S2
6. Verifying Installation of the Software
7. Advanced Installation Instructions
8. Identifying the Software Version Number
9. Un Installing the Software for Foxconn 945PL7AC-S2
10. Entering the Option ROM User Interface
11. Option ROM RAID Volume Management
12. Verifying the Version of the Option ROM Software

Company

Foxconn

Categories

Motherboards

Serie

Foxconn Socket 775

Model

Foxconn 945PL7AC-S2

Description

On-Board Audio Drivers

Operating System

Windows 2000-XP 32/64 bits-2003

Version

V1.0

Size Driver

30.2MB

File Name

audio34.zip

Observations

Realtek Semiconductor Corp. AC'97 Sound System Software ver:A3.80
Installation and Setup for 945PL7AC-S2
Driver and Application Installation/Removal Procedure For Realtek AC'97 Codec:
======================================

For Windows 2000/Windows Me/Windows XP /Win98 Gold(First Edition)/Win98SE

----------------------------------------
Setup Audio Driver and Application for Foxconn 945PL7AC-S2 at first time:
----------------------------------------

Step 1. Before installing the Realtek AC'97 Drivers & Applications, Press the
[Cancel] button if Windows detect the PCI Multimedia Audio device.

Step 2. Insert the "Realtek AC'97 Drivers & Applications" CD into the CD-ROM
drive and run the setup.exe program to finish the installation.

Step 3. Click on [Next/OK/Go] to continue the procedure. If the Windows popup
"Digital Signature Not Found" message, press [Yes] to continue the
installation.

Step 4. Finally, select to restart the system and press [Finish] to complete
the installation.

The system will reload the drivers and do some adjustments in the INF
file if so required.

----------------------------------------
Installation Manual Foxconn 945PL7AC-S2
----------------------------------------
1. Double-click the "System" icon to open the "System Properties" dialog from Control Panel .
2. Choose "Hardware" tab and click the "Device Manager" button .
3. Please right-click mouse on "MultiMedia Audio Controller" and choose the "Properties" menu item
to show the driver details.
4. Click the "Driver" tab and then click the "Update Driver." button for update.
5. Please follow the instructions of the "Upgrade Device Driver Wizard".
6. Choose "Search for a suitable driver for my device" and click the "Next" button.
7. Please specify the driver location/source and then click the "Next" button in this case,
"Specify a location" has been chosen.
8. If "Specify driver location" is chosen, the Wizard will ask for the path where the driver is located.
9. Click the "Next" button to install Audio Driver on "Driver Files Search Results".
10. If the "Digital Signature Not Found" dialog is opened, click the "Yes" button to continue
the Installation.
11. After completing the above steps, the drier has been installed into the system.
Please click "Finish" button to complete the installation.

----------------------------------------
Update Foxconn 945PL7AC-S2 Driver and Application:
----------------------------------------

Step 1. Follow Step 2,3,4 described in [Setup at first time] above to complete
the procedure.

----------------------------------------
Remove Foxconn 945PL7AC-S2 Driver and Application:
----------------------------------------

Step 1. Go to Start\Settings\Control Panel.

Step 2. Select [Add/Remove Programs] icon.

Step 3. Select "Realtek AC'97 Audio" and press [Change/Remove]
button.

Step 4. Click on [Next/OK/Go] to finish the uninstallation.

Step 5. At the end of the procedure, select to restart the system and press
[Finish] to complete the uninstallation for 945PL7AC-S2 Audio Driver.
For Windows NT4.0 driver

----------------------------------------
Setup Audio Driver and Application for Foxconn 945PL7AC-S2 at first time:
----------------------------------------

Ignore Step 1, and follow the same procedure in Windows 2000/Windows Me/Windows XP.

----------------------------------------
Update Foxconn 945PL7AC-S2 Driver and Application:
----------------------------------------

The same procedure in Windows 2000/Windows Me/Windows XP.

----------------------------------------
Remove Foxconn 945PL7AC-S2 Driver and Application:
----------------------------------------

The same procedure in Windows 2000/Windows Me/Windows XP.

Company

Foxconn

Categories

Motherboards

Serie

Foxconn Socket 775

Model

Foxconn 945PL7AC-S2

Description

On-Board LAN Drivers

Operating System

Windows Me-2000-XP 32/64 bits

Size Driver

2.4MB

File Name

lan2.zip

Observations

REALTEK RTL Gigabit and Fast Ethernet NIC Driver Setup Utility for Foxconn 945PL7AC-S2
Windows Me/2000/XP NDIS Driver

======================

How to use this RTLSetup Utility
----------------------------------------
Install Foxconn 945PL7AC-S2 in Windows Me:

1. If the Operating System's New Hardware Wizard prompts you that
"New Hardware Found" for the "PCI Ethernet Controller", you should
click "Next" until "Finish" is clicked and without specifying
location of the driver. You will see the "PCI Ethernet Controller"
in the Device Manager.

2. Then you can install or update the NDIS driver with "setup" or
"setup -s" command:
a) setup: The InstallShield will prompt you the steps to install
or upgrade the driver.

b) setup -s: The InstallShield will complete the installation or
upgrade without prompting you any instruction.

You need to reboot the system immediately after the Install shield
completes the installation/upgrade.

3. Do not click "Cancel" during New Hardware Wizard searches for the
driver.

4. You can remove RTLSetup utility from Add/Remove Program Palette in
Control Panel, the InstallShield will prompt you the steps to remove
the driver. After remove the driver, please restart the system
immediately.

Install Foxconn 945PL7AC-S2 in Windows 2000 and XP:

1. If the Operating System's Found New Hardware Wizard prompts you that
"New Hardware Found" for the "Ethernet Controller", you should click
"Next" until "Finish" is clicked and without specifying location of
the driver. You will see the "Ethernet Controller" in the Device
Manager.

2. Then you can install or upgrade the NDIS driver with "setup" or
"setup -s" command:
a) setup: The InstallShield will prompt you the steps to install
or upgrade the driver.

b) setup -s: The InstallShield will complete the installation or
upgrade without prompting you any instruction.

3. You can remove RTLSetup utility from Add/Remove Program Palette in
Control Panel, the InstallShield will prompt you the steps to remove
the driver. After remove the driver, please restart the system
immediately if you want your networking to be re-installed.

Access to Official Website Foxconn

Sorry, Foxconn Official Website has disappeared!

Welcome to the HelpDrivers, driver for printers.

Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more

You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.

Do not rename the file you're downloading, it may cause installation problems.

Available 7 files for Foxconn 945PL7AC-S2

Select Files