Biostar PT880 Pro-A7 1.0 Motherboards > Downloads Drivers, Utilities, Manual and BIOS

Company

Biostar

Categories

Motherboards

Serie

Biostar Intel

Model

Biostar PT880 Pro-A7 1.0

Description

Manual PDF

Information

Manual PDF

Operating System

Manual

Size Driver

418KB

File Name

bios_update.pdf

Observations

BIOS Update
BIOS Update is a convenient utility which allows you to update your motherboard BIOS
under Windows system.
Update BIOS
with a BIOS file
Clear CMOS function
(Only for AWARD BIOS)
Show current BIOS information
Save current BIOS
to a .bin file
AWARD BIOS AMI BIOS
Online Update function
(Only for AMI BIOS)

Once click on this button, the
saving dialog will show.
Choose the position to save file
and enter file name. (We
recommend that the file name
should be English/number and
no longer than 7 characters.)
Then click Save.
After the saving process, finish
dialog will show. Click on OK to
complete the BIOS Backup
procedure.

Before doing this, please download the proper BIOS file from the website.
For AWARD BIOS, update BIOS procedure
should be run with Clear CMOS function, so
please check on Clear CMOS first.
Then click Update BIOS button, a
dialog will show for asking you backup
current BIOS. Click Yes for BIOS
backup and refer to the Backup BIOS
procedure; or click No to skip this
procedure.
After the BIOS Backup procedure, the
open dialog will show for requesting the
BIOS file which is going to be updated.
Please choose the proper BIOS file for
updating, then click on Open.
The utility will update BIOS with the
proper BIOS file, and this process may
take minutes. Please do not open any
other applications during this process.
After the BIOS Update process, click
on OK to restart the system.
While the system boots up and the full screen logo shows, press
key to enter BIOS setup.
In the BIOS setup, use the Load Optimized Defaults function and then Save and
Exit Setup to exit BIOS setup. BIOS Update is completed.
(for AMI BIOS only)
Automatically download and update the latest BIOS via internet; make sure that
the computer is connected to the internet before using this function.
After clicking on the Online Update
button, the utility will search for the
latest BIOS from internet. If there is
a new BIOS version, the utility will
ask you to download it. Click Yes to
proceed.
If there is no other newer BIOS
version, the utility will also tell you that
your BIOS has been the latest version.
Download completes; the utility will
ask you to program (update) the
BIOS. Click Yes to proceed.
The programming procedure may take minutes, please do not make any
operation during the programming process.
After the updating process, the utility will
ask you to reboot the system. Click OK
to reboot.
While the system boots up and the full screen logo shows, press
key to enter BIOS setup.
In the BIOS setup, use the Load Optimized Defaults function and then Save and
Exit Setup to exit BIOS setup. Online Update is completed.

Company

Biostar

Categories

Motherboards

Serie

Biostar Intel

Model

Biostar PT880 Pro-A7 1.0

Description

USB 2.0 Controller

Operating System

Windows 2000-XP 32bits

Version

0.9.0.5

Size Driver

318KB

File Name

setup.exe

Date

2009-03-06

Observations

Summary:
- Gold Release Update for the Broadcom 5751, 5751m 7.5 Project.
- Added Windows 2000 cat file, and Windows NT driver.
- Added 5702, 5705, and 5788 bootcode.

Software Compatibility
======================

This release of software supports:
- Broadcom 5751 Gigabit Ethernet with A0, A1 step silicon

Contents of the CD
==================
*** Release Version Information Table ***

Product Version Previous Rel.

Windows Driver - WinNT 7.73 n/a
Windows Driver - Win2k 7.73* 7.73
Windows Driver - WinXP 7.73* 7.73*
DOS NDIS2 Driver 7.61 7.61
Linux Driver 7.2.24 7.2.24
Netware ODI32 Driver 7.57 7.57
Netware ODI16 Driver 7.61 7.61
DOS Diagnostics 7.27 7.27
PXE 7.5.14 7.5.14
Bootcode for 5702 3.37 n/a
Bootcode for 5705 3.18 n/a
Bootcode for 5751 3.23 3.23
Bootcode for 5751m 3.23 3.23
Bootcode for 5788 3.04 n/a
BACS 7.5.2 7.5.2
BMAPI 6.4.9 6.4.9
CABW32 6.1.3 6.1.3
User Guide 4.05.03 4.05.03

Company

Biostar

Categories

Motherboards

Serie

Biostar Intel

Model

Biostar PT880 Pro-A7 1.0

Description

On-Board LAN

Operating System

Windows 2000-XP-2003 32bits

Version

3.67.0.452

Size Driver

509KB

File Name

xp32.zip

Date

2007-12-05

Observations

This document shows you how to setup the driver in Windows operating system.

Contents of the Subdirectory:
=============================

FETND5AV.SYS The NDIS5 driver for Windows 98/98SE/ME.
FETND5BV.SYS The NDIS5 driver for Windows 2000/XP/SRV2003/Vista.
FETND4.SYS The NDIS4 driver for Windows 95OSR2.
FETND3.SYS The NDIS3 driver for Windows 95.
FETND.DOS The NDIS2 driver for Windows.
FETODI.COM The ODI driver for Windows.
FETNDIS.INF The installation information file.
WINNDI.DLL The Co-installer for Windows.
VUINS16.DLL The Un-installer for Windows.
VUINS32.DLL The Un-installer for Windows 2K/XP/SRV2003.
DIFXAPI.DLL The DIFx API for Vista.
WIN.TXT This file.

Installation:
=============

Before starting with the installation process, make sure that the adapter
is properly installed and configured.

1. Turn on the power of your PC on to boot from Windows operating system.
Windows will auto-detect your new adapter, and the "New Hardware Found"
dialogue box will appear. Select "Driver from disk provided by hardware
manufacturer" to install driver from the diskette that comes with your
LAN adapter.

2. Insert the driver diskette into your floppy drive, and specify the
path of the driver in the diskette(i.e. A:\) to copy the driver
files to your system.

3. When the driver installation is completed, restart Windows.
Note:

1. The NDIS2 and ODI drivers are only supported in Windows 95.

2. In Setup Option "Flow Control":
When setting to Hardware Default(Auto), the flow control setting is
according to the auto-negotiation result based on PHY hardware default
values. However, when setting to other values(Disable, Enable), driver
will just disable or enable flow control ability according to your setting.

Company

Biostar

Categories

Motherboards

Serie

Biostar Intel

Model

Biostar PT880 Pro-A7 1.0

Description

On-Board Audio

Operating System

Windows 95-98-Me-2000-XP 32bits-XP 64bits

Version

5.10.00.6240

Size Driver

17.5MB

File Name

alc850_6240.exe

Date

2007-06-09

Observations

Driver & Application Installation/Removal Procedure For Realtek AC'97 Codec:
=================================================================================

<<< For Win2000/WinME/WinXP (WDM driver)/Win98 Gold(First Edition)/Win98SE >>>

---------------------------------------
Setup Driver/Application at first time:
---------------------------------------

Step 1. Before installing the Realtek AC'97 Drivers & Applications, Press the
[Cancel] button if Windows detect the PCI Multimedia Audio device.

Step 2. Insert the "Realtek AC'97 Drivers & Applications" CD into the CD-ROM
drive and run the setup.exe program to finish the installation.

Step 3. Click on [Next/OK/Go] to continue the procedure. If the Windows popup
"Digital Signature Not Found" message, press [Yes] to continue the
installation.

Step 4. Finally, select to restart the system and press [Finish] to complete
the installation.

The system will reload the drivers and do some adjustments in the INF
file if so required.

----------------
Setup for Manual
----------------
1. Double-click the "System" icon to open the "System Properties" dialog from Control Panel .
2. Choose "Hardware" tab and click the "Device Manager" button .
3. Please right-click mouse on "MultiMedia Audio Controller" and choose the "Properties" menu item
to show the driver details.
4. Click the "Driver" tab and then click the "Update Driver..." button for update.
5. Please follow the instructions of the "Upgrade Device Driver Wizard".
6. Choose "Search for a suitable driver for my device" and click the "Next" button.
7. Please specify the driver location/source and then click the "Next" button in this case,
"Specify a location" has been chosen.
8. If "Specify driver location" is chosen, the Wizard will ask for the path where the driver is located.
9. Click the "Next" button to install Audio Driver on "Driver Files Search Results".
10. If the "Digital Signature Not Found" dialog is opened, click the "Yes" button to continue
the Installation.
11. After completing the above steps, the drier has been installed into the system.
Please click "Finish" button to complete the installation.

--------------------------
Update Driver/Application:
--------------------------

Step 1. Follow Step 2,3,4 described in [Setup at first time] above to complete
the procedure.

--------------------------
Remove Driver/Application:
--------------------------

Step 1. Go to Start\Settings\Control Panel.

Step 2. Select [Add/Remove Programs] icon.

Step 3. Select "Realtek AC'97 Audio" and press [Change/Remove]
button.

Step 4. Click on [Next/OK/Go] to finish the uninstallation.

Step 5. At the end of the procedure, select to restart the system and press
[Finish] to complete the uninstallation.

Company

Biostar

Categories

Motherboards

Serie

Biostar Intel

Model

Biostar PT880 Pro-A7 1.0

Description

On-Board LAN

Operating System

Windows Vista 32bits

Version

3.67.0.452

Size Driver

431KB

File Name

vista32.zip

Date

2007-12-05

Observations

Company

Biostar

Categories

Motherboards

Serie

Biostar Intel

Model

Biostar PT880 Pro-A7 1.0

Description

On-Board LAN

Operating System

Windows Vista 64bits

Version

3.67.0.452

Size Driver

480KB

File Name

vista64.zip

Date

2007-12-05

Observations

This document shows you how to setup the driver in Windows operating system.

Contents of the Subdirectory:
=============================

FET5A64B.SYS The NDIS5 driver for WinXP/Server2003 x64 Edition for AMD64.
FETNDA64.INF The installation information file.
VUINS64.DLL The Un-installer for WinXP/Server2003 x64 Edition for AMD64.
DIFXAPI.DLL The DIFx API for Windows Vista x64 Edition for AMD64.
WINX64.TXT This file.

Installation:
=============

Before starting with the installation process, make sure that the adapter
is properly installed and configured.

1. Turn on the power of your PC on to boot from Windows operating system.
Windows will auto-detect your new adapter, and the "New Hardware Found"
dialogue box will appear. Select "Driver from disk provided by hardware
manufacturer" to install driver from the diskette that comes with your
LAN adapter.

2. Insert the driver diskette into your floppy drive, and specify the
path of the driver in the diskette(i.e. A:\) to copy the driver
files to your system.
Note:

1. In Setup Option "Flow Control":
When setting to Hardware Default(Auto), the flow control setting is
according to the auto-negotiation result based on PHY hardware default
values. However, when setting to other values(Disable, Enable), driver
will just disable or enable flow control ability according to your setting.

Company

Biostar

Categories

Motherboards

Serie

Biostar Intel

Model

Biostar PT880 Pro-A7 1.0

Description

On-Board LAN

Operating System

Windows XP 64bits-2003 64bits

Version

3.67.0.452

Size Driver

446KB

File Name

xp64.zip

Date

2007-12-05

Observations

Access to Official Website Biostar

Home English Home Spanish Home German Drivers English Drivers Spanish Drivers German

Welcome to the HelpDrivers, driver for printers.

Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more

You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.

Do not rename the file you're downloading, it may cause installation problems.

Available 13 files for Biostar PT880 Pro-A7 1.0

Select Files