Available 17 files for Biostar P4M800 Pro-M7 8.0
Select Files
Company
Biostar
Categories
Motherboards
Serie
Biostar Intel
Model
Biostar P4M800 Pro-M7 8.0
Description
BIOS
Operating System
BIOS
Version
2007-08-29
Size Driver
512KB
File Name
p4mpm613.bsb
Date
2007-08-29
Observations
Add smart fan option. 4-pin fan With Biostar logo.
Company
Biostar
Categories
Motherboards
Serie
Biostar Intel
Model
Biostar P4M800 Pro-M7 8.0
Description
BIOS
Operating System
BIOS
Version
2008-08-05
Size Driver
512KB
File Name
p4mpm805.bsb
Date
2008-08-05
Observations
Update CPU Micro code Beta
Company
Biostar
Categories
Motherboards
Serie
Biostar Intel
Model
Biostar P4M800 Pro-M7 8.0
Description
Manual PDF
Information
Manual PDF
Operating System
Manual
Size Driver
418KB
File Name
bios_update.pdf
Observations
BIOS Update
BIOS Update is a convenient utility which allows you to update your motherboard BIOS
under Windows system.
Update BIOS
with a BIOS file
Clear CMOS function
(Only for AWARD BIOS)
Show current BIOS information
Save current BIOS
to a .bin file
AWARD BIOS AMI BIOS
Online Update function
(Only for AMI BIOS)
Once click on this button, the
saving dialog will show.
Choose the position to save file
and enter file name. (We
recommend that the file name
should be English/number and
no longer than 7 characters.)
Then click Save.
After the saving process, finish
dialog will show. Click on OK to
complete the BIOS Backup
procedure.
Before doing this, please download the proper BIOS file from the website.
For AWARD BIOS, update BIOS procedure
should be run with Clear CMOS function, so
please check on Clear CMOS first.
Then click Update BIOS button, a
dialog will show for asking you backup
current BIOS. Click Yes for BIOS
backup and refer to the Backup BIOS
procedure; or click No to skip this
procedure.
After the BIOS Backup procedure, the
open dialog will show for requesting the
BIOS file which is going to be updated.
Please choose the proper BIOS file for
updating, then click on Open.
The utility will update BIOS with the
proper BIOS file, and this process may
take minutes. Please do not open any
other applications during this process.
After the BIOS Update process, click
on OK to restart the system.
While the system boots up and the full screen logo shows, press
key to enter BIOS setup.
In the BIOS setup, use the Load Optimized Defaults function and then Save and
Exit Setup to exit BIOS setup. BIOS Update is completed.
Automatically download and update the latest BIOS via internet; make sure that
the computer is connected to the internet before using this function.
After clicking on the Online Update
button, the utility will search for the
latest BIOS from internet. If there is
a new BIOS version, the utility will
ask you to download it. Click Yes to
proceed.
If there is no other newer BIOS
version, the utility will also tell you that
your BIOS has been the latest version.
Download completes; the utility will
ask you to program (update) the
BIOS. Click Yes to proceed.
The programming procedure may take minutes, please do not make any
operation during the programming process.
After the updating process, the utility will
ask you to reboot the system. Click OK
to reboot.
While the system boots up and the full screen logo shows, press
key to enter BIOS setup.
In the BIOS setup, use the Load Optimized Defaults function and then Save and
Exit Setup to exit BIOS setup. Online Update is completed.
Company
Biostar
Categories
Motherboards
Serie
Biostar Intel
Model
Biostar P4M800 Pro-M7 8.0
Description
USB 2.0 Controller
Operating System
Windows 2000-XP 32bits
Version
0.9.0.5
Size Driver
318KB
File Name
setup.exe
Date
2009-03-06
Observations
Summary:
- Gold Release Update for the Broadcom 5751, 5751m 7.5 Project.
- Added Windows 2000 cat file, and Windows NT driver.
- Added 5702, 5705, and 5788 bootcode.
Software Compatibility
======================
This release of software supports:
- Broadcom 5751 Gigabit Ethernet with A0, A1 step silicon
Contents of the CD
==================
*** Release Version Information Table ***
Product Version Previous Rel.
Windows Driver - WinNT 7.73 n/a
Windows Driver - Win2k 7.73* 7.73
Windows Driver - WinXP 7.73* 7.73*
DOS NDIS2 Driver 7.61 7.61
Linux Driver 7.2.24 7.2.24
Netware ODI32 Driver 7.57 7.57
Netware ODI16 Driver 7.61 7.61
DOS Diagnostics 7.27 7.27
PXE 7.5.14 7.5.14
Bootcode for 5702 3.37 n/a
Bootcode for 5705 3.18 n/a
Bootcode for 5751 3.23 3.23
Bootcode for 5751m 3.23 3.23
Bootcode for 5788 3.04 n/a
BACS 7.5.2 7.5.2
BMAPI 6.4.9 6.4.9
CABW32 6.1.3 6.1.3
User Guide 4.05.03 4.05.03
Company
Biostar
Categories
Motherboards
Serie
Biostar Intel
Model
Biostar P4M800 Pro-M7 8.0
Description
BIOS Utility
Operating System
Windows 2000-XP 32bits-XP 64bits-Vista 32bits-Vista 64bits-2003 32bits-2003 64bits-XP MCE
Version
1.9.2.3
Size Driver
3.5MB
File Name
bios.zip
Date
2009-02-20
Observations
BIOS Update is a convenient utility which allows you to update your motherboard BIOS
Company
Biostar
Categories
Motherboards
Serie
Biostar Intel
Model
Biostar P4M800 Pro-M7 8.0
Description
On-Board LAN
Operating System
Windows 2000-XP-2003 32bits
Version
3.67.0.452
Size Driver
509KB
File Name
xp32.zip
Date
2007-12-05
Observations
This document shows you how to setup the driver in Windows operating system.
Contents of the Subdirectory:
=============================
FETND5AV.SYS The NDIS5 driver for Windows 98/98SE/ME.
FETND5BV.SYS The NDIS5 driver for Windows 2000/XP/SRV2003/Vista.
FETND4.SYS The NDIS4 driver for Windows 95OSR2.
FETND3.SYS The NDIS3 driver for Windows 95.
FETND.DOS The NDIS2 driver for Windows.
FETODI.COM The ODI driver for Windows.
FETNDIS.INF The installation information file.
WINNDI.DLL The Co-installer for Windows.
VUINS16.DLL The Un-installer for Windows.
VUINS32.DLL The Un-installer for Windows 2K/XP/SRV2003.
DIFXAPI.DLL The DIFx API for Vista.
WIN.TXT This file.
Installation:
=============
Before starting with the installation process, make sure that the adapter
is properly installed and configured.
1. Turn on the power of your PC on to boot from Windows operating system.
Windows will auto-detect your new adapter, and the "New Hardware Found"
dialogue box will appear. Select "Driver from disk provided by hardware
manufacturer" to install driver from the diskette that comes with your
LAN adapter.
2. Insert the driver diskette into your floppy drive, and specify the
path of the driver in the diskette(i.e. A:\) to copy the driver
files to your system.
3. When the driver installation is completed, restart Windows.
Note:
1. The NDIS2 and ODI drivers are only supported in Windows 95.
2. In Setup Option "Flow Control":
When setting to Hardware Default(Auto), the flow control setting is
according to the auto-negotiation result based on PHY hardware default
values. However, when setting to other values(Disable, Enable), driver
will just disable or enable flow control ability according to your setting.
Company
Biostar
Categories
Motherboards
Serie
Biostar Intel
Model
Biostar P4M800 Pro-M7 8.0
Description
On-Board VGA
Operating System
Windows 2000-XP-2003 32bits
Version
6.14.10.0357
Size Driver
6.7MB
File Name
win2kxp.exe
Date
2007-12-05
Observations
Installation instructions
-------------------------
1. These drivers must be installed by a user with Windows 2000/XP Administrator
privileges. Please consult your system administrator or Microsoft
Windows 2000/XP User's Manual for more information on Administrator
privileges.
2. Start Microsoft Windows 2000/XP.
3. From the Start menu, select Settings.
4. Select Control Panel.
5. Select System.
6. Select Device Manager.
7. Under Display adapters, select the name of the NVIDIA adapter you have
installed. If you do not see a Display adapters option, or if your NVIDIA
adapter is not listed, under Other Devices, select Video Controller (VGA
Compatible).
8. Select the Driver tab.
9. Select Update Driver.
10. Select Next.
11. Select Next.
12. Verify that "Specify a location" has a check mark next to it. If it does
not, click in the box next to "Specify a location" to place a check mark
in the box. Select Next.
13. Enter the path to the NVIDIA drivers in the "Copy manufacturer's files
from:" dialog. Select OK.
14. If you get a dialog box that states "A suitable driver for this device
is already installed.", click in the box next to "Install one of the
other drivers" to place a check mark in the box, then select Next.
Otherwise, select Next, then proceed to step 16.
15. Select the following driver from the list. NVIDIA RIVA TNT is used an
example; make sure to select your NVIDIA adapter from the list.
Description Provider Manufacturer Location
----------- -------- ------------ --------
NVIDIA RIVA TNT NVIDIA NVIDIA a:\nv4_disp.inf
Select Next.
16. Select Finish.
17. Select Close.
18. Windows 2000/XP will ask if you wish to restart the computer.
Company
Biostar
Categories
Motherboards
Serie
Biostar Intel
Model
Biostar P4M800 Pro-M7 8.0
Description
On-Board VGA
Operating System
Windows 95-98-Me
Version
4.14.10.0063
Size Driver
7.7MB
File Name
win9xme.exe
Date
2007-12-05
Company
Biostar
Categories
Motherboards
Serie
Biostar Intel
Model
Biostar P4M800 Pro-M7 8.0
Description
On-Board Audio
Operating System
Windows 95-98-Me-2000-XP 32bits-XP 64bits
Version
5.10.00.6240
Size Driver
17.5MB
File Name
alc850_6240.exe
Date
2007-06-09
Observations
Driver & Application Installation/Removal Procedure For Realtek AC'97 Codec:
=================================================================================
<<< For Win2000/WinME/WinXP (WDM driver)/Win98 Gold(First Edition)/Win98SE >>>
---------------------------------------
Setup Driver/Application at first time:
---------------------------------------
Step 1. Before installing the Realtek AC'97 Drivers & Applications, Press the
[Cancel] button if Windows detect the PCI Multimedia Audio device.
Step 2. Insert the "Realtek AC'97 Drivers & Applications" CD into the CD-ROM
drive and run the setup.exe program to finish the installation.
Step 3. Click on [Next/OK/Go] to continue the procedure. If the Windows popup
"Digital Signature Not Found" message, press [Yes] to continue the
installation.
Step 4. Finally, select to restart the system and press [Finish] to complete
the installation.
The system will reload the drivers and do some adjustments in the INF
file if so required.
----------------
Setup for Manual
----------------
1. Double-click the "System" icon to open the "System Properties" dialog from Control Panel .
2. Choose "Hardware" tab and click the "Device Manager" button .
3. Please right-click mouse on "MultiMedia Audio Controller" and choose the "Properties" menu item
to show the driver details.
4. Click the "Driver" tab and then click the "Update Driver..." button for update.
5. Please follow the instructions of the "Upgrade Device Driver Wizard".
6. Choose "Search for a suitable driver for my device" and click the "Next" button.
7. Please specify the driver location/source and then click the "Next" button in this case,
"Specify a location" has been chosen.
8. If "Specify driver location" is chosen, the Wizard will ask for the path where the driver is located.
9. Click the "Next" button to install Audio Driver on "Driver Files Search Results".
10. If the "Digital Signature Not Found" dialog is opened, click the "Yes" button to continue
the Installation.
11. After completing the above steps, the drier has been installed into the system.
Please click "Finish" button to complete the installation.
--------------------------
Update Driver/Application:
--------------------------
Step 1. Follow Step 2,3,4 described in [Setup at first time] above to complete
the procedure.
--------------------------
Remove Driver/Application:
--------------------------
Step 1. Go to Start\Settings\Control Panel.
Step 2. Select [Add/Remove Programs] icon.
Step 3. Select "Realtek AC'97 Audio" and press [Change/Remove]
button.
Step 4. Click on [Next/OK/Go] to finish the uninstallation.
Step 5. At the end of the procedure, select to restart the system and press
[Finish] to complete the uninstallation.
Company
Biostar
Categories
Motherboards
Serie
Biostar Intel
Model
Biostar P4M800 Pro-M7 8.0
Description
On-Board LAN
Operating System
Windows 98-Me-2000-XP 32bits-XP 64bits
Version
5.687.0225.2008
Size Driver
4.6MB
File Name
setup.exe
Date
2008-04-18
Observations
Summary:
- Gold Release Update for the Broadcom 5751, 5751m 7.5 Project.
- Added Windows 2000 cat file, and Windows NT driver.
- Added 5702, 5705, and 5788 bootcode.
Software Compatibility
======================
This release of software supports:
- Broadcom 5751 Gigabit Ethernet with A0, A1 step silicon
Contents of the CD
==================
*** Release Version Information Table ***
Product Version Previous Rel.
Windows Driver - WinNT 7.73 n/a
Windows Driver - Win2k 7.73* 7.73
Windows Driver - WinXP 7.73* 7.73*
DOS NDIS2 Driver 7.61 7.61
Linux Driver 7.2.24 7.2.24
Netware ODI32 Driver 7.57 7.57
Netware ODI16 Driver 7.61 7.61
DOS Diagnostics 7.27 7.27
PXE 7.5.14 7.5.14
Bootcode for 5702 3.37 n/a
Bootcode for 5705 3.18 n/a
Bootcode for 5751 3.23 3.23
Bootcode for 5751m 3.23 3.23
Bootcode for 5788 3.04 n/a
BACS 7.5.2 7.5.2
BMAPI 6.4.9 6.4.9
CABW32 6.1.3 6.1.3
User Guide 4.05.03 4.05.03
Company
Biostar
Categories
Motherboards
Serie
Biostar Intel
Model
Biostar P4M800 Pro-M7 8.0
Description
Chipset
Operating System
Windows 98-Me-2000-XP 32bits-XP 64bits-Vista 32bits-Vista 64bits-2003 32bits-2003 64bits
Version
V5.21A
Size Driver
12.7MB
File Name
via_hyperionpro_v521a.zip
Date
2009-03-06
Company
Biostar
Categories
Motherboards
Serie
Biostar Intel
Model
Biostar P4M800 Pro-M7 8.0
Description
Serial ATA RAID
Operating System
Windows 98-Me-2000-XP 32bits-XP 64bits-Vista 32bits-Vista 64bits-2003 32bits-2003 64bits
Version
5.1.6000.581
Size Driver
428KB
File Name
drvdisk.exe
Date
2009-03-06
Company
Biostar
Categories
Motherboards
Serie
Biostar Intel
Model
Biostar P4M800 Pro-M7 8.0
Description
On-Board LAN
Operating System
Windows Vista 32bits
Version
3.67.0.452
Size Driver
431KB
File Name
vista32.zip
Date
2007-12-05
Observations
This document shows you how to setup the driver in Windows operating system.
Contents of the Subdirectory:
=============================
FETND5AV.SYS The NDIS5 driver for Windows 98/98SE/ME.
FETND5BV.SYS The NDIS5 driver for Windows 2000/XP/SRV2003/Vista.
FETND4.SYS The NDIS4 driver for Windows 95OSR2.
FETND3.SYS The NDIS3 driver for Windows 95.
FETND.DOS The NDIS2 driver for Windows.
FETODI.COM The ODI driver for Windows.
FETNDIS.INF The installation information file.
WINNDI.DLL The Co-installer for Windows.
VUINS16.DLL The Un-installer for Windows.
VUINS32.DLL The Un-installer for Windows 2K/XP/SRV2003.
DIFXAPI.DLL The DIFx API for Vista.
WIN.TXT This file.
Installation:
=============
Before starting with the installation process, make sure that the adapter
is properly installed and configured.
1. Turn on the power of your PC on to boot from Windows operating system.
Windows will auto-detect your new adapter, and the "New Hardware Found"
dialogue box will appear. Select "Driver from disk provided by hardware
manufacturer" to install driver from the diskette that comes with your
LAN adapter.
2. Insert the driver diskette into your floppy drive, and specify the
path of the driver in the diskette(i.e. A:\) to copy the driver
files to your system.
3. When the driver installation is completed, restart Windows.
Note:
1. The NDIS2 and ODI drivers are only supported in Windows 95.
2. In Setup Option "Flow Control":
When setting to Hardware Default(Auto), the flow control setting is
according to the auto-negotiation result based on PHY hardware default
values. However, when setting to other values(Disable, Enable), driver
will just disable or enable flow control ability according to your setting.
Company
Biostar
Categories
Motherboards
Serie
Biostar Intel
Model
Biostar P4M800 Pro-M7 8.0
Description
On-Board LAN
Operating System
Windows Vista 32bits-Vista 64bits
Version
6.103.0126.2007
Size Driver
3.8MB
File Name
setup.exe
Date
2007-11-03
Observations
Summary:
- Gold Release Update for the Broadcom 5751, 5751m 7.5 Project.
- Added Windows 2000 cat file, and Windows NT driver.
- Added 5702, 5705, and 5788 bootcode.
Software Compatibility
======================
This release of software supports:
- Broadcom 5751 Gigabit Ethernet with A0, A1 step silicon
Contents of the CD
==================
*** Release Version Information Table ***
Product Version Previous Rel.
Windows Driver - WinNT 7.73 n/a
Windows Driver - Win2k 7.73* 7.73
Windows Driver - WinXP 7.73* 7.73*
DOS NDIS2 Driver 7.61 7.61
Linux Driver 7.2.24 7.2.24
Netware ODI32 Driver 7.57 7.57
Netware ODI16 Driver 7.61 7.61
DOS Diagnostics 7.27 7.27
PXE 7.5.14 7.5.14
Bootcode for 5702 3.37 n/a
Bootcode for 5705 3.18 n/a
Bootcode for 5751 3.23 3.23
Bootcode for 5751m 3.23 3.23
Bootcode for 5788 3.04 n/a
BACS 7.5.2 7.5.2
BMAPI 6.4.9 6.4.9
CABW32 6.1.3 6.1.3
User Guide 4.05.03 4.05.03
Company
Biostar
Categories
Motherboards
Serie
Biostar Intel
Model
Biostar P4M800 Pro-M7 8.0
Description
On-Board LAN
Operating System
Windows Vista 64bits
Version
3.67.0.452
Size Driver
480KB
File Name
vista64.zip
Date
2007-12-05
Observations
This document shows you how to setup the driver in Windows operating system.
Contents of the Subdirectory:
=============================
FET5A64B.SYS The NDIS5 driver for WinXP/Server2003 x64 Edition for AMD64.
FETNDA64.INF The installation information file.
VUINS64.DLL The Un-installer for WinXP/Server2003 x64 Edition for AMD64.
DIFXAPI.DLL The DIFx API for Windows Vista x64 Edition for AMD64.
WINX64.TXT This file.
Installation:
=============
Before starting with the installation process, make sure that the adapter
is properly installed and configured.
1. Turn on the power of your PC on to boot from Windows operating system.
Windows will auto-detect your new adapter, and the "New Hardware Found"
dialogue box will appear. Select "Driver from disk provided by hardware
manufacturer" to install driver from the diskette that comes with your
LAN adapter.
2. Insert the driver diskette into your floppy drive, and specify the
path of the driver in the diskette(i.e. A:\) to copy the driver
files to your system.
Note:
1. In Setup Option "Flow Control":
When setting to Hardware Default(Auto), the flow control setting is
according to the auto-negotiation result based on PHY hardware default
values. However, when setting to other values(Disable, Enable), driver
will just disable or enable flow control ability according to your setting.
Company
Biostar
Categories
Motherboards
Serie
Biostar Intel
Model
Biostar P4M800 Pro-M7 8.0
Description
On-Board LAN
Operating System
Windows XP 64bits-2003 64bits
Version
3.67.0.452
Size Driver
446KB
File Name
xp64.zip
Date
2007-12-05
Observations
This document shows you how to setup the driver in Windows operating system.
Contents of the Subdirectory:
=============================
FET5A64B.SYS The NDIS5 driver for WinXP/Server2003 x64 Edition for AMD64.
FETNDA64.INF The installation information file.
VUINS64.DLL The Un-installer for WinXP/Server2003 x64 Edition for AMD64.
DIFXAPI.DLL The DIFx API for Windows Vista x64 Edition for AMD64.
WINX64.TXT This file.
Installation:
=============
Before starting with the installation process, make sure that the adapter
is properly installed and configured.
1. Turn on the power of your PC on to boot from Windows operating system.
Windows will auto-detect your new adapter, and the "New Hardware Found"
dialogue box will appear. Select "Driver from disk provided by hardware
manufacturer" to install driver from the diskette that comes with your
LAN adapter.
2. Insert the driver diskette into your floppy drive, and specify the
path of the driver in the diskette(i.e. A:\) to copy the driver
files to your system.
Note:
1. In Setup Option "Flow Control":
When setting to Hardware Default(Auto), the flow control setting is
according to the auto-negotiation result based on PHY hardware default
values. However, when setting to other values(Disable, Enable), driver
will just disable or enable flow control ability according to your setting.
Company
Biostar
Categories
Motherboards
Serie
Biostar Intel
Model
Biostar P4M800 Pro-M7 8.0
Description
On-Board VGA
Operating System
Windows XP 64bits-2003 64bits
Version
6.14.10.6003
Size Driver
5.9MB
File Name
winxp_64.exe
Date
2007-12-05
Access to Official Website Biostar
Welcome to the HelpDrivers, driver for printers.
Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more
You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.
Do not rename the file you're downloading, it may cause installation problems.