Available 8 files for Asrock X533
Select Files
Company
Asrock
Categories
Motherboards
Serie
Asrock Intel Serie
Model
Asrock X533
Description
Bios 1. CPU Microcode updated. 2. Celeron 2. 8 GHz CPU should be shown correctly.
Operating System
MS-DOS
Version
1.40
Size Driver
326KB
File Name
x533(1.40).zip
Observations
ASRock BIOS Upgrade Instruction
BIOS Update Utility
AFUDOS.EXE: The Flash Memory Writer utility is included in the WinZip format of BIOS file. It updates the BIOS by uploading a new BIOS file to the programmable flash ROM chip on the motherboard. To determine the BIOS version of your motherboard, press "F2" to enter the BIOS setup utility during bootup, and check the BIOS version from the Main menu. Larger numbers represent a newer BIOS file. This utility works only in DOS mode. (How do I check the BIOS version?)
The Flash Memory Writer utility can not be suitable for all ASRock motherboards. Please use the Flash utility which is included in each BIOS file to update its BIOS. Also ASRock motherboard MUST use ASRock's Flash utility to update BIOS, those uncertified BIOS flashing tools will cause motherboard damage.
Updating BIOS Procedures
Create a bootable system floppy disk.
Download an updated ASRock BIOS file (WinZip format with .zip file extension) from the web site, unzip the BIOS file and save both AFUDOS.EXE utility and BIOS file to the disk you created in step 1.
Boot from the disk you created in step 2.
At the "A:\" prompt, type AFUDOS, hit space bar once, and type BIOS file name then press "Enter". For example: A:\AFUDOS ANF7R301 "Enter" then you will see a message "Please wait for BIOS loading ROM".
After 30 seconds, you will see the message "Program ended normally", then you have finished upgrading the BIOS.
After finishing upgrading the BIOS, please remove the floppy disk. Restart your system and press "F2" to enter the BIOS setup utility during boot up.
In Exit menu, please select "Load Default Settings" and press "Enter" to continue.
Select "Exit Saving Changes" and press "Enter" to exit the BIOS setup utility.
Now, system is booting up with new BIOS.
How do I check the BIOS version?
1.The BIOS version can be found during system boot up.
2.The BIOS version can be found in BIOS setup utility.
Notice
If you encounter problems while updating the new BIOS, DO NOT turn off your system since this corrupt BIOS might cause your system failed to boot up. Just repeat the process, and if the problem still persists, update the original BIOS file. If the Flash Memory Writer utility was not able to successfully update a complete BIOS file, your system may not be able to boot up. If this happens, your system will need service.
Company
Asrock
Categories
Motherboards
Serie
Asrock Intel Serie
Model
Asrock X533
Description
Bios 1. Hardware Monitor should show correct CPU voltage. 2. System should operate well after resuming from "suspend to RAM". 3. Set "Floppy Drive Seek" to default "Enabled".
Operating System
MS-DOS
Version
1.20
Size Driver
321KB
File Name
x533(1.20).zip
Observations
ASRock BIOS Upgrade Instruction
BIOS Update Utility
AFUDOS.EXE: The Flash Memory Writer utility is included in the WinZip format of BIOS file. It updates the BIOS by uploading a new BIOS file to the programmable flash ROM chip on the motherboard. To determine the BIOS version of your motherboard, press "F2" to enter the BIOS setup utility during bootup, and check the BIOS version from the Main menu. Larger numbers represent a newer BIOS file. This utility works only in DOS mode. (How do I check the BIOS version?)
The Flash Memory Writer utility can not be suitable for all ASRock motherboards. Please use the Flash utility which is included in each BIOS file to update its BIOS. Also ASRock motherboard MUST use ASRock's Flash utility to update BIOS, those uncertified BIOS flashing tools will cause motherboard damage.
Updating BIOS Procedures
Create a bootable system floppy disk.
Download an updated ASRock BIOS file (WinZip format with .zip file extension) from the web site, unzip the BIOS file and save both AFUDOS.EXE utility and BIOS file to the disk you created in step 1.
Boot from the disk you created in step 2.
At the "A:\" prompt, type AFUDOS, hit space bar once, and type BIOS file name then press "Enter". For example: A:\AFUDOS ANF7R301 "Enter" then you will see a message "Please wait for BIOS loading ROM".
After 30 seconds, you will see the message "Program ended normally", then you have finished upgrading the BIOS.
After finishing upgrading the BIOS, please remove the floppy disk. Restart your system and press "F2" to enter the BIOS setup utility during boot up.
In Exit menu, please select "Load Default Settings" and press "Enter" to continue.
Select "Exit Saving Changes" and press "Enter" to exit the BIOS setup utility.
Now, system is booting up with new BIOS.
How do I check the BIOS version?
1.The BIOS version can be found during system boot up.
2.The BIOS version can be found in BIOS setup utility.
Notice
If you encounter problems while updating the new BIOS, DO NOT turn off your system since this corrupt BIOS might cause your system failed to boot up. Just repeat the process, and if the problem still persists, update the original BIOS file. If the Flash Memory Writer utility was not able to successfully update a complete BIOS file, your system may not be able to boot up. If this happens, your system will need service.
Company
Asrock
Categories
Motherboards
Serie
Asrock Intel Serie
Model
Asrock X533
Description
Bios 1. With two Promise IDE RAID card FastTrak Tx2000 installed, both 2 cards should be working. 2. Vcore value should be shown correctly. 3. When power on the system right after shutting down, system should boot up correctly. 4. CPU temperature should be shown correctly. 5. COM port mouse should be working if USB Legacy Support is enabled.
Operating System
MS-DOS
Version
1.30
Size Driver
321KB
File Name
x533(1.30).zip
Observations
ASRock BIOS Upgrade Instruction
BIOS Update Utility
AFUDOS.EXE: The Flash Memory Writer utility is included in the WinZip format of BIOS file. It updates the BIOS by uploading a new BIOS file to the programmable flash ROM chip on the motherboard. To determine the BIOS version of your motherboard, press "F2" to enter the BIOS setup utility during bootup, and check the BIOS version from the Main menu. Larger numbers represent a newer BIOS file. This utility works only in DOS mode. (How do I check the BIOS version?)
The Flash Memory Writer utility can not be suitable for all ASRock motherboards. Please use the Flash utility which is included in each BIOS file to update its BIOS. Also ASRock motherboard MUST use ASRock's Flash utility to update BIOS, those uncertified BIOS flashing tools will cause motherboard damage.
Updating BIOS Procedures
Create a bootable system floppy disk.
Download an updated ASRock BIOS file (WinZip format with .zip file extension) from the web site, unzip the BIOS file and save both AFUDOS.EXE utility and BIOS file to the disk you created in step 1.
Boot from the disk you created in step 2.
At the "A:\" prompt, type AFUDOS, hit space bar once, and type BIOS file name then press "Enter". For example: A:\AFUDOS ANF7R301 "Enter" then you will see a message "Please wait for BIOS loading ROM".
After 30 seconds, you will see the message "Program ended normally", then you have finished upgrading the BIOS.
After finishing upgrading the BIOS, please remove the floppy disk. Restart your system and press "F2" to enter the BIOS setup utility during boot up.
In Exit menu, please select "Load Default Settings" and press "Enter" to continue.
Select "Exit Saving Changes" and press "Enter" to exit the BIOS setup utility.
Now, system is booting up with new BIOS.
How do I check the BIOS version?
1.The BIOS version can be found during system boot up.
2.The BIOS version can be found in BIOS setup utility.
Notice
If you encounter problems while updating the new BIOS, DO NOT turn off your system since this corrupt BIOS might cause your system failed to boot up. Just repeat the process, and if the problem still persists, update the original BIOS file. If the Flash Memory Writer utility was not able to successfully update a complete BIOS file, your system may not be able to boot up. If this happens, your system will need service.
Company
Asrock
Categories
Motherboards
Serie
Asrock Intel Serie
Model
Asrock X533
Description
USB 2.0 driver
Operating System
Windows 98-Me
Version
2.52
Size Driver
6.5MB
File Name
usb_me_98(2.52).zip
Company
Asrock
Categories
Motherboards
Serie
Asrock Intel Serie
Model
Asrock X533
Description
Lan driver
Operating System
Windows 98-Me-2000-XP
Version
2.7
Size Driver
3MB
File Name
lan_xp_2k_me_98(2.7).zip
Observations
User Guide for Utilities
README.TXT
This file.
DIAG.EXE
Diagnostics program.
Please refer to the text files (*.TXT) in each utility subdirectory.
User Guide for Drivers
Please refer to the text files (*.TXT) in each driver subdirectory.
For example, if you are installing Windows platform drivers, please
read the text file in \WIN.TXT for installation information.
User Guide for Unattended Mode Installation
Please refer to the text files (*.TXT) in \UNATTEND\ subdirectory.
You could find the sample file in each subdirectory as well.
Company
Asrock
Categories
Motherboards
Serie
Asrock Intel Serie
Model
Asrock X533
Description
VIA 4 in 1 driver
Operating System
Windows 98-Me-2000-XP
Version
4.46
Size Driver
1.2MB
File Name
4in1_xp_2k_me_98(4.46).zip
Company
Asrock
Categories
Motherboards
Serie
Asrock Intel Serie
Model
Asrock X533
Description
VIA AC'97 audio driver
Operating System
Windows 98-Me-2000-XP
Version
4.00a
Size Driver
8.4MB
File Name
via_xp_2k_me_98(4.00a).zip
Company
Asrock
Categories
Motherboards
Serie
Asrock Intel Serie
Model
Asrock X533
Description
User Manual
Information
Manual
Operating System
Manual
Language Manual
English
Size Driver
573KB
File Name
x533.pdf
Access to Official Website Asrock
Welcome to the HelpDrivers, driver for printers.
Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more
You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.
Do not rename the file you're downloading, it may cause installation problems.