Asrock P4VM900-SATA2 Motherboards > Downloads Drivers and BIOS

Company

Asrock

Categories

Motherboards

Serie

Asrock Intel Serie

Model

Asrock P4VM900-SATA2

Description

Bios First released.

Operating System

MS-DOS

Version

1.10

Size Driver

445KB

File Name

p4vm900-sata2(1.10).zip

Observations

ASRock BIOS Upgrade Instruction

BIOS Update Utility

AFUDOS.EXE: The Flash Memory Writer utility is included in the WinZip format of BIOS file. It updates the BIOS by uploading a new BIOS file to the programmable flash ROM chip on the motherboard. To determine the BIOS version of your motherboard, press "F2" to enter the BIOS setup utility during bootup, and check the BIOS version from the Main menu. Larger numbers represent a newer BIOS file. This utility works only in DOS mode. (How do I check the BIOS version?)
The Flash Memory Writer utility can not be suitable for all ASRock motherboards. Please use the Flash utility which is included in each BIOS file to update its BIOS. Also ASRock motherboard MUST use ASRock's Flash utility to update BIOS, those uncertified BIOS flashing tools will cause motherboard damage.

Updating BIOS Procedures

Create a bootable system floppy disk.
Download an updated ASRock BIOS file (WinZip format with .zip file extension) from the web site, unzip the BIOS file and save both AFUDOS.EXE utility and BIOS file to the disk you created in step 1.
Boot from the disk you created in step 2.
At the "A:\" prompt, type AFUDOS, hit space bar once, and type BIOS file name then press "Enter". For example: A:\AFUDOS ANF7R301 "Enter" then you will see a message "Please wait for BIOS loading ROM".
After 30 seconds, you will see the message "Program ended normally", then you have finished upgrading the BIOS.
After finishing upgrading the BIOS, please remove the floppy disk. Restart your system and press "F2" to enter the BIOS setup utility during boot up.
In Exit menu, please select "Load Default Settings" and press "Enter" to continue.
Select "Exit Saving Changes" and press "Enter" to exit the BIOS setup utility.
Now, system is booting up with new BIOS.

How do I check the BIOS version?

1.The BIOS version can be found during system boot up.
2.The BIOS version can be found in BIOS setup utility.

Notice

If you encounter problems while updating the new BIOS, DO NOT turn off your system since this corrupt BIOS might cause your system failed to boot up. Just repeat the process, and if the problem still persists, update the original BIOS file. If the Flash Memory Writer utility was not able to successfully update a complete BIOS file, your system may not be able to boot up. If this happens, your system will need service.

Company

Asrock

Categories

Motherboards

Serie

Asrock Intel Serie

Model

Asrock P4VM900-SATA2

Description

Lan driver

Operating System

Windows 2000-XP

Version

3.67

Size Driver

506KB

File Name

lan_xp_2k(3.67).zip

Observations

Introduction:
=============

This document shows you how to use the Windows setup programs. These programs
run under Windows 95/95OSR2/98SE/ME/NT4/2000/XP/Server 2003/Vista for x86 &
Windows XP/Server 2003/Vista for AMD64 respectively. You may use these programs
to install/update/remove network adapter driver.
Structure of the directory:
=============================

WINSETUP.TXT This file.
winsetup.exe The integrated setup program for Windows
platform.
WinUinst.exe The integrated uninstall program for Windows
platform.
VETUP16.DLL The 16-bit side thunk dll for Windows
95/95OSR2/98SE/ME.
VETUP32.DLL The 32-bit side thunk dll for Windows
95/95OSR2/98SE/ME.
VETUP64.DLL The 64-bit dll for 64-bit Windows OS on x64.
NTSETUP.INF The information file for Windows NT4 setup.
ntsim2.sys PCI bus detection service for 32-bit Windows NT/2K/XP.
ntsim2a.sys PCI bus detection service for 64-bit Windows OS on x64.
Usage:
======

The Windows setup program will search the information file automatically in
Windows 95/95OSR2/98SE/ME/2000/XP/Server 2003 ("OEMSETUP.INF" in Windows NT4),
and then automatically install/update driver according to the information file.
The information file search paths are current directory, upper directory and
root directory by order.

Company

Asrock

Categories

Motherboards

Serie

Asrock Intel Serie

Model

Asrock P4VM900-SATA2

Description

Realtek high definition audio driver

Operating System

Windows 2000-XP-Vista

Version

R1.62

Size Driver

42.9MB

File Name

realtek_vista_xp_2k(r1.62).zip

Observations

Driver Installation/Removal Procedure For Realtek High Definition Audio Codec:
=================================================================================

<<< For Win2000/WinXP/Winx64 (WDM driver) >>>

---------------------------------------
Setup Driver at first time:
---------------------------------------

Step 1. Before installing the Realtek HD Audio Drivers, Press the
[Cancel] button if Windows detect the Multimedia Audio device.

Step 2. Insert the "Realtek HD Audio Drivers" CD into the CD-ROM
drive and run the setup.exe program to finish the installation.

Step 3. Click on [Next/OK/Go] to continue the procedure. If the Windows popup
"Digital Signature Not Found" message, press [Yes] to continue the
installation.

Step 4. Finally, select to restart the system and press [Finish] to complete
the installation.

The system will reload the drivers and do some adjustments in the INF
file if so required.

--------------------------
Update Driver:
--------------------------

Step 1. Follow Step 2,3,4 described in [Setup at first time] above to complete
the procedure.

--------------------------
Remove Driver:
--------------------------

Step 1. Go to Start\Settings\Control Panel.

Step 2. Select [Add/Remove Programs] icon.

Step 3. Select "Realtek HD Audio Drivers" and press [Change/Remove]
button.

Step 4. Click on [Next/OK/Go] to finish the uninstallation.

Step 5. At the end of the procedure, select to restart the system and press
[Finish] to complete the uninstallation.

Company

Asrock

Categories

Motherboards

Serie

Asrock Intel Serie

Model

Asrock P4VM900-SATA2

Description

Lan driver

Operating System

Windows Vista

Version

3.67

Size Driver

428KB

File Name

lan_vista(3.67).zip

Observations

Introduction:
=============

This document shows you how to setup the driver in Windows operating system.

Contents of the Subdirectory:
=============================

FETND5AV.SYS The NDIS5 driver for Windows 98/98SE/ME.
FETND5BV.SYS The NDIS5 driver for Windows 2000/XP/SRV2003/Vista.
FETND4.SYS The NDIS4 driver for Windows 95OSR2.
FETND3.SYS The NDIS3 driver for Windows 95.
FETND.DOS The NDIS2 driver for Windows.
FETODI.COM The ODI driver for Windows.
FETNDIS.INF The installation information file.
WINNDI.DLL The Co-installer for Windows.
VUINS16.DLL The Un-installer for Windows.
VUINS32.DLL The Un-installer for Windows 2K/XP/SRV2003.
DIFXAPI.DLL The DIFx API for Vista.
WIN.TXT This file.

Installation:
=============

Before starting with the installation process, make sure that the adapter
is properly installed and configured.

1. Turn on the power of your PC on to boot from Windows operating system.
Windows will auto-detect your new adapter, and the "New Hardware Found"
dialogue box will appear. Select "Driver from disk provided by hardware
manufacturer" to install driver from the diskette that comes with your
LAN adapter.

2. Insert the driver diskette into your floppy drive, and specify the
path of the driver in the diskette(i.e. A:\) to copy the driver
files to your system.

3. When the driver installation is completed, restart Windows.
Note:

1. The NDIS2 and ODI drivers are only supported in Windows 95.

2. In Setup Option "Flow Control":
When setting to Hardware Default(Auto), the flow control setting is
according to the auto-negotiation result based on PHY hardware default
values. However, when setting to other values(Disable, Enable), driver
will just disable or enable flow control ability according to your setting.

Access to Official Website Asrock

Home English Home Spanish Home French Home German Drivers English Drivers Spanish Drivers French Drivers German

Welcome to the HelpDrivers, driver for printers.

Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more

You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.

Do not rename the file you're downloading, it may cause installation problems.

Available 12 files for Asrock P4VM900-SATA2

Select Files