Asrock GE PRO-HT R3.0 Motherboards > Downloads Drivers, Manual and BIOS

Company

Asrock

Categories

Motherboards

Serie

Asrock Intel Serie

Model

Asrock GE PRO-HT R3.0

Description

Bios 1. For Rev. 1. x board, CPU temperature should be shown correctly in the System Hardware Monitor. 2. System should resume from hibernate correctly if USB Legacy Support is enabled in BIOS setup.

Operating System

MS-DOS

Version

2.40

Size Driver

352KB

File Name

ge_pro-ht(r3)(2.40).zip

Observations

ASRock BIOS Upgrade Instruction

BIOS Update Utility

AFUDOS.EXE: The Flash Memory Writer utility is included in the WinZip format of BIOS file. It updates the BIOS by uploading a new BIOS file to the programmable flash ROM chip on the motherboard. To determine the BIOS version of your motherboard, press "F2" to enter the BIOS setup utility during bootup, and check the BIOS version from the Main menu. Larger numbers represent a newer BIOS file. This utility works only in DOS mode. (How do I check the BIOS version?)
The Flash Memory Writer utility can not be suitable for all ASRock motherboards. Please use the Flash utility which is included in each BIOS file to update its BIOS. Also ASRock motherboard MUST use ASRock's Flash utility to update BIOS, those uncertified BIOS flashing tools will cause motherboard damage.

Updating BIOS Procedures

Create a bootable system floppy disk.
Download an updated ASRock BIOS file (WinZip format with .zip file extension) from the web site, unzip the BIOS file and save both AFUDOS.EXE utility and BIOS file to the disk you created in step 1.
Boot from the disk you created in step 2.
At the "A:\" prompt, type AFUDOS, hit space bar once, and type BIOS file name then press "Enter". For example: A:\AFUDOS ANF7R301 "Enter" then you will see a message "Please wait for BIOS loading ROM".
After 30 seconds, you will see the message "Program ended normally", then you have finished upgrading the BIOS.
After finishing upgrading the BIOS, please remove the floppy disk. Restart your system and press "F2" to enter the BIOS setup utility during boot up.
In Exit menu, please select "Load Default Settings" and press "Enter" to continue.
Select "Exit Saving Changes" and press "Enter" to exit the BIOS setup utility.
Now, system is booting up with new BIOS.

How do I check the BIOS version?

1.The BIOS version can be found during system boot up.
2.The BIOS version can be found in BIOS setup utility.

Notice

If you encounter problems while updating the new BIOS, DO NOT turn off your system since this corrupt BIOS might cause your system failed to boot up. Just repeat the process, and if the problem still persists, update the original BIOS file. If the Flash Memory Writer utility was not able to successfully update a complete BIOS file, your system may not be able to boot up. If this happens, your system will need service.

Company

Asrock

Categories

Motherboards

Serie

Asrock Intel Serie

Model

Asrock GE PRO-HT R3.0

Description

Bios

Operating System

MS-DOS

Version

1.70

Size Driver

345KB

File Name

ge_pro-ht(r3)(1.70).zip

Observations

ASRock BIOS Upgrade Instruction

Model name should be shown correctly.
2. System should resume from hibernate correctly if USB Legacy Support is enabled in BIOS setup.
BIOS Update Utility

AFUDOS.EXE: The Flash Memory Writer utility is included in the WinZip format of BIOS file. It updates the BIOS by uploading a new BIOS file to the programmable flash ROM chip on the motherboard. To determine the BIOS version of your motherboard, press "F2" to enter the BIOS setup utility during bootup, and check the BIOS version from the Main menu. Larger numbers represent a newer BIOS file. This utility works only in DOS mode. (How do I check the BIOS version?)
The Flash Memory Writer utility can not be suitable for all ASRock motherboards. Please use the Flash utility which is included in each BIOS file to update its BIOS. Also ASRock motherboard MUST use ASRock's Flash utility to update BIOS, those uncertified BIOS flashing tools will cause motherboard damage.

Updating BIOS Procedures

Create a bootable system floppy disk.
Download an updated ASRock BIOS file (WinZip format with .zip file extension) from the web site, unzip the BIOS file and save both AFUDOS.EXE utility and BIOS file to the disk you created in step 1.
Boot from the disk you created in step 2.
At the "A:\" prompt, type AFUDOS, hit space bar once, and type BIOS file name then press "Enter". For example: A:\AFUDOS ANF7R301 "Enter" then you will see a message "Please wait for BIOS loading ROM".
After 30 seconds, you will see the message "Program ended normally", then you have finished upgrading the BIOS.
After finishing upgrading the BIOS, please remove the floppy disk. Restart your system and press "F2" to enter the BIOS setup utility during boot up.
In Exit menu, please select "Load Default Settings" and press "Enter" to continue.
Select "Exit Saving Changes" and press "Enter" to exit the BIOS setup utility.
Now, system is booting up with new BIOS.

How do I check the BIOS version?

1.The BIOS version can be found during system boot up.
2.The BIOS version can be found in BIOS setup utility.

Notice

If you encounter problems while updating the new BIOS, DO NOT turn off your system since this corrupt BIOS might cause your system failed to boot up. Just repeat the process, and if the problem still persists, update the original BIOS file. If the Flash Memory Writer utility was not able to successfully update a complete BIOS file, your system may not be able to boot up. If this happens, your system will need service.

Company

Asrock

Categories

Motherboards

Serie

Asrock Intel Serie

Model

Asrock GE PRO-HT R3.0

Description

Bios

Operating System

MS-DOS

Version

2.20

Size Driver

352KB

File Name

ge_pro-ht(r3)(2.20).zip

Observations

ASRock BIOS Upgrade Instruction

The speed of DDR SDRAM should be shown correctly in BIOS setup.
2. System should resume from hibernate correctly if USB Legacy Support is enabled in BIOS setup.
BIOS Update Utility

AFUDOS.EXE: The Flash Memory Writer utility is included in the WinZip format of BIOS file. It updates the BIOS by uploading a new BIOS file to the programmable flash ROM chip on the motherboard. To determine the BIOS version of your motherboard, press "F2" to enter the BIOS setup utility during bootup, and check the BIOS version from the Main menu. Larger numbers represent a newer BIOS file. This utility works only in DOS mode. (How do I check the BIOS version?)
The Flash Memory Writer utility can not be suitable for all ASRock motherboards. Please use the Flash utility which is included in each BIOS file to update its BIOS. Also ASRock motherboard MUST use ASRock's Flash utility to update BIOS, those uncertified BIOS flashing tools will cause motherboard damage.

Updating BIOS Procedures

Create a bootable system floppy disk.
Download an updated ASRock BIOS file (WinZip format with .zip file extension) from the web site, unzip the BIOS file and save both AFUDOS.EXE utility and BIOS file to the disk you created in step 1.
Boot from the disk you created in step 2.
At the "A:\" prompt, type AFUDOS, hit space bar once, and type BIOS file name then press "Enter". For example: A:\AFUDOS ANF7R301 "Enter" then you will see a message "Please wait for BIOS loading ROM".
After 30 seconds, you will see the message "Program ended normally", then you have finished upgrading the BIOS.
After finishing upgrading the BIOS, please remove the floppy disk. Restart your system and press "F2" to enter the BIOS setup utility during boot up.
In Exit menu, please select "Load Default Settings" and press "Enter" to continue.
Select "Exit Saving Changes" and press "Enter" to exit the BIOS setup utility.
Now, system is booting up with new BIOS.

How do I check the BIOS version?

1.The BIOS version can be found during system boot up.
2.The BIOS version can be found in BIOS setup utility.

Notice

If you encounter problems while updating the new BIOS, DO NOT turn off your system since this corrupt BIOS might cause your system failed to boot up. Just repeat the process, and if the problem still persists, update the original BIOS file. If the Flash Memory Writer utility was not able to successfully update a complete BIOS file, your system may not be able to boot up. If this happens, your system will need service.

Company

Asrock

Categories

Motherboards

Serie

Asrock Intel Serie

Model

Asrock GE PRO-HT R3.0

Description

USB driver

Operating System

Windows 98-Me

Version

105

Size Driver

264KB

File Name

usb_me_98(105).zip

Observations

The USB 2.0 drivers support for Microsoft Windows XP
USB 2.0 drivers are provided in Service Pack 1 (SP1) for Windows XP,
which is available through Windows Update http://windowsupdate.microsoft.com/ .

The USB 2.0 drivers support for Microsoft Windows 2K
USB 2.0 drivers are provided in Service Pack 4 (SP4) for Windows 2K,
which is available through Windows Update http://windowsupdate.microsoft.com/ .

Company

Asrock

Categories

Motherboards

Serie

Asrock Intel Serie

Model

Asrock GE PRO-HT R3.0

Description

SiS VGA driver

Operating System

Windows 98-Me-2000-XP

Version

3.64

Size Driver

15.4MB

File Name

vga_xp_2k_me_98(3.64).zip

Observations

Overview
--------
Our software package consists of VGA drivers, utilities and Installation/Uninstallation programs for Windows 98/ME/2000/XP. The installation/uninstallation programs are capable of installing/uninstalling VGA drivers and utilities respectively. Our utilities consist of utility manager, driver mode setting utility, gamma correction utility, video setting utility, TV output setting utility, center screen for TV, product and file information utility, utility tray, AGP information utility, 3D wizard utility, OSD, hotkey define utility and SiSFlash utility.
Objective
---------
The objective of this document is to introduce all utilities in our VGA package applications for Windows 98/ME/2K/XP briefly and give users a common view upon our VGA utilities. The detail descriptions of all utilities will be mentioned in the following documents that will cover "utility outlook", "function descriptions", "operation environment" and the related information.
Utility Introduction
--------------------
(1) Utility manager:
It acts as an entrance for users to enter all SiS utilities. Users can move the mouse upon an animation utility button shown in utility manager and press it to invoke the specified utility dialog.

(2) Driver mode setting:
It provides users to change display state, including driver mode, output device and resolution.

(3) Gamma correction:
It provides users to adjust the screen color TINT, the tint range from blue to red, according the preference of the users.

(4) Video setting:
It provides users to adjust the hue, saturation, contrast, and brightness of video display.

(5) TV output setting:
It provides users to adjust the TV screen position and TV filter.

(6) Center screen for TV:
It provides users to adjust display boundary on TV system.

(7) Product and file information:
It is aimed to list out the product information and the related files information included in the VGA package.

(8) Utility tray:
It acts the launcher of SiS utilities.

(9) AGP information:
It is aimed to show the current AGP transfer rate of the system.

(10) 3D wizard:
It provides users to adjust the "3DStereo", "OverClock", "D3D", "OpenGL" and other 3D settings.

(11) OSD:
It provides users to adjust utility setting quickly through the OSD window and hotkey. User can adjust the 3D stereo, Gamma and Video Setting in OSD window by hotkeys.

(12) Hotkey define:
It provides friendly ways for users to define hotkeys associated with specified functions of "OSD" or "3D Stereo".

(13) SiSFlash:
It provides users to backup or update flash ROM data on graphic card.

Company

Asrock

Categories

Motherboards

Serie

Asrock Intel Serie

Model

Asrock GE PRO-HT R3.0

Description

C-Media AC97 audio driver

Operating System

Windows 98-Me-2000-XP

Version

UDA038_build03L

Size Driver

20.2MB

File Name

c-media_xp_2k_me_98(uda038_build03l).zip

Observations

C-Media AC97 Play3D Demo Release Note

//====================
//Ver 002 2003/02/19 Start
//===================
1.add press image into Stop button
2.when stop or change path mode,the ball will back to default position
3.Enviroment effect only work during this application
4.Add Doppler Effect (limit to helicopter sound source)
5.when add tooptip into dlg,change to ID from 0 to 101
6.exe file change to CmiPlay3D.exe
7.Check DSound work normally or not
8.change icon

Company

Asrock

Categories

Motherboards

Serie

Asrock Intel Serie

Model

Asrock GE PRO-HT R3.0

Description

SiS IDE driver

Operating System

Windows 98-Me-2000-XP

Version

2.04a

Size Driver

5.3MB

File Name

ide_xp_2k_me_98(2.04a).zip

Observations

Mini IDE Package V2.04a Setup Utility update/Modification/Bug Fixed
1. Remove the setup control for SiS180 IDE/RAID controller and SiS Mini IDE driver
support SiS5513 IDE controller only.
SiS961/962/963 5513 IDE Controller [Package V2.04a]
1. Windows XP driver certified by WHQL as for logo driver.
2. Submission ID for Windows XP driver is 728265.
3. Driver Version/Modification/Bug Fixed
[Windows 2000 driver v2.03]
Filename Driver Version
siside.sys 2.03.02.0
- Retain SiS Mini IDE driver v2.03.
[Windows XP driver v2.04a]
Filename Driver Version
siside.sys 5.1.1039.2041
- Remove SiS Mini IDE driver support for SiS180 IDE/RAID controller.

Company

Asrock

Categories

Motherboards

Serie

Asrock Intel Serie

Model

Asrock GE PRO-HT R3.0

Description

SiS PCI Lan driver

Operating System

Windows 98-Me-2000-XP

Version

1.16b

Size Driver

10.4MB

File Name

lan_xp_2k_me_98(1.16b).zip

Observations

Note for using this Setup Utility
---------------------------------
For Windows 98/98SE/ME/2000/XP:
--------------------------------

Install the driver with "setup" or "setup -s" command:
1. setup: The Install shield will prompt you the steps to install
the driver.

2. setup -s: The Install shield will complete the installation
without prompting you any instruction.

--------------------
For Windows 95/OSR2:
--------------------

1. If the Operating System's New Hardware Wizard prompts you that
"New Hardware Found" for the PCI Ethernet Controller, you should
click "Next" until "Finish" is clicked without specifying location
of the driver. You will see the "PCI Ethernet Controller" in the
Device Manager.

2. Then you can install the driver with "setup" or "setup -s" command:
a) setup: The Install shield will prompt you the steps to install
the driver.

b) setup -s: The Install shield will complete the installation
without prompting you any instruction.

You need to reboot the system immediately after the Install shield
completes the installation.

3. Do not click "Cancel" during New Hardware Wizard searches for the
driver.

4. After remove the driver, please restart the system immediately.

-----------------------
For Windows NT 3.5x/4.0
-----------------------
Do not use this utility in Windows NT 3.5x or 4.0.

Access to Official Website Asrock

Home English Home Spanish Home French Home German Drivers English Drivers Spanish Drivers French Drivers German

Welcome to the HelpDrivers, driver for printers.

Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more

You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.

Do not rename the file you're downloading, it may cause installation problems.

Available 14 files for Asrock GE PRO-HT R3.0

Select Files